Influence of culture conditions on exopolysaccharide production by Lactobacillus rhamnosus strain C83

The influence of culture conditions on growth and exopolysaccharide (EPS) production by Lactobacillus rhamnosus strain C83 was investigated using fermentor batch cultures. A temperature shift (from 37 to 25 °C) at the beginning of the exponential growth phase (0–5 h) enhanced EPS production. Furthermore, an optimal environmental pH of 6·2–7·2 improved the performance of strain C83 and partially anaerobic culture conditions (pO₂ from 0 to 10%) triggered EPS over-production by the cells. The sugar composition of this polymer was independent of culture conditions, such as carbon source, medium composition, temperature, pH, pO₂ and growth phases. In all cases, galactose and glucose were the principal components.     

Production of a Novel Extracellular Polysaccharide by Lactobacillus sake 0-1 and Characterization of the Polysaccharide

A novel exopolysaccharide (EPS) produced by Lactobacillus sake 0-1 (CBS 532.92) has been isolated and characterized. When the strain was grown on glucose, the produced EPS contained glucose and rhamnose in a molar ratio of 3:2 and the average molecular mass distribution (M(infm)) was determined at 6 x 10(sup6) Da. At a concentration of 1%, the 0-1 EPS had better viscosifying properties than xanthan gum when measured over a range of shear rates from 0 to 300 s(sup-1), while shear-thinning properties were comparable. Rheological data and anion-exchange chromatography suggested the presence of a negatively charged group in the EPS. Physiological parameters for optimal production of EPS were determined in batch fermentation experiments. Maximum EPS production was 1.40 g (middot) liter(sup-1), which was obtained when L. sake 0-1 had been grown anaerobically at 20(deg)C and pH 5.8. When cultured at lower temperatures, the EPS production per gram of biomass increased from 600 mg at 20(deg)C to 700 mg at 10(deg)C but the growth rate in the exponential phase decreased from 0.16 to 0.03 g (middot) liter(sup-1) (middot) h(sup-1). EPS production started in the early growth phase and stopped when the culture reached the stationary phase. Growing the 0-1 strain on different energy sources such as glucose, galactose, mannose, fructose, lactose, and sucrose did not alter the composition of the EPS produced.     

Factors affecting the production of hydrogen sulphide by Lactobacillus sake L13 growing on vacuum-packaged beef

Lactobacillus sake L13 produced hydrogen sulphide during growth at 0°C on vacuum-packaged beef of normal pH (5·6–5·8) when the packaging films used had oxygen permeabilities as high as 200 ml/m²/24 h/atm (measured at 25°C and 98% relative humidity. No hydrogen sulphide was detected when the film permeability was 300 ml/m²/24 h/atm. Sulphmyoglobin was formed whenever hydrogen sulphide was present except when the film permeability was very low (1 ml of oxygen/m²/24 h/atm). Lactobacillus sake L13 also produced hydrogen sulphide when grown on beef under anaerobic conditions at 5°C. When meat pH was high (6·4–6·6) hydrogen sulphide was first detected after incubation for 9 d. When 250 μg of glucose was added to each g of high pH meat, or when meat pH was normal (5·6–5·8), hydrogen sulphide was first detected after incubation for 18 d. The spoilage of beef by hydrogen sulphide-producing lactobacilli is more rapid when the pH of the meat is high because high-pH meat contains less glucose. Sulphmyoglobin formation and greening can be prevented by the use of packaging films of very low oxygen permeability.     

Culture conditions affect the chemical composition of the exopolysaccharide synthesized by the fungus Aureobasidium pullulans

Aims:  To identify if culture conditions affect the chemical composition of exopolysaccharide (EPS) produced by Aureobasidium pullulans .
Methods and Results:  In batch airlift and continuously stirred tank (CSTR) reactors the EPS produced with low (0·13 g l⁻¹ N) initial NaNO₃ or (NH₄)₂SO₄ levels contained pullulan, with maltotriose as its major component, similar to that synthesized in the airlift reactor with high (0·78 g l⁻¹ N) initial NaNO₃ levels. EPS produced by CSTR grown cultures with high (NH₄)₂SO₄ levels contained little pullulan, possibly because of a population shift from unicells to mycelium. This chemical difference may explain why total EPS yields did not fall as they did with cultures grown under identical conditions with high NaNO₃ levels, where the pullulan component of the EPS disappeared. EPS synthesized in N-limiting chemostat cultures of A. pullulans changed little with growth rate or N source, being predominantly pullulan consisting of maltotriose units.
Conclusions:  While the EPS chemical composition changed little under N-limiting conditions, high initial medium N levels determined maltotriose content and/or pullulan content possibly by dictating culture morphology.
Significance and Impact of the Study:  These results emphasize the requirement of all studies to determine EPS chemical composition when examining the influence of culture conditions on EPS yields.     

Production, purification and characterization of an α-amylase produced by Saccharomycopsis fibuligera

Saccharomycopsis fibuligera ST 2 produced high levels of extracellular amylase during the stationary phase of growth. Glucose or other low molecular weight metabolizable sugars did not repress the synthesis of the amylase, indicating the lack of catabolite repression in this organism. Of the nitrogen sources examined, yeast extract and corn steep liquor stimulated the highest yield of amylase. Ammonium sulphate inhibited α-amylase synthesis. The enzyme was purified 118-fold from the culture supernatant fluid by isopropanol precipitation and DEAE-Sephadex A50 chromatography. The purified enzyme was characterized as an α-amylase. The α-amylase had the following properties: molecular weight, 40900 ± 500; optimum temperature, 60°C; activation energy, 1600 cal/mol; optimum pH, 4·8–6·0; range of pH stability, pH 4·0–9·4; K_m (50°C, pH 5·5) for soluble starch, 0·572 mg/ml; final products of starch hydrolysis—glucose, maltose, maltotriose and maltotetraose.     

Isolation of an emulsifier from Yarrowia lipolytica NCIM 3589 using a modified mini isoelectric focusing unit

A Yarrowia lipolytica strain (NCIM 3589) isolated in our laboratory produced an emulsifier during the stationary phase when grown in a defined artificial sea water medium containing 1% (v/v) n -hexadecane, as the sole carbon source. The emulsifier was isolated by ultrafiltration, Sepharose 4B followed by isoelectric focusing (IEF) in a miniscale unit in the pH range of 3·0–10 and 3·5–5·0. The pI of the emulsifier was 4·0. The emulsifier is a glycolipid consisting of 5% protein, 20% carbohydrate and 75% lipid. The fatty acid, sugar and amino acid composition of the isolated emulsifier are described along with temperature stability, pH stability and stability in sodium chloride. This paper is a first report on rapid and simple isolation by IEF of a microbial emulsifier.     

Purification and characterization of acid proteinase from Neosartorya fischeri var. spinosa IBT 4872

An acid proteinase from Neosartorya fischeri var. spinosa IBT 4872 was purified 38-fold with a yield of 11% by ultrafiltration, ammonium sulphate fractionation, Sephadex-G200 gel filtration, DEAE-Sephadex anion exchange chromatography, and hydroxyapatite chromatography. The enzyme was most active at pH 3·0 and 50 °C and had a molecular weight of 45 kDa, as determined by SDS-PAGE. It was stable over a pH range of 3·0 to 6·0 and exhibited thermal stability up to 50 °C. The Km value for haemoglobin was 0·44% (w/v). The activity was inhibited by pepstatin, suggesting that the enzyme is an aspartic proteinase.     

Scanning Isoelectric Focusing and Isotachophoresis of Clostridium perfringens Type A Enterotoxin

Fractionation of highly purified Cl. perfringens type A enterotoxin by scanning isoelectric focusing (SIF) and isotachophoresis (IT) in polyacrylamide gels is described for the first time. The use of 2% ampholytes pH 3–6 allowed the separation of enterotoxin into 2 species. The major component had an isoelectric point of 4·5 and possessed antigenic as well as functional activity. The minor component of enterotoxin, at equivalent concentrations, was devoid of any demonstrable biological activity had an isoelectric point of 4·6 and appeared to represent approximately 15% of the purified enterotoxin. With ampholytes pH 3·5–10 the minor and major components were focused at different times than when ampholine pH 3–6 was employed. Electrofocusing of enterotoxin in the presence of 6 M-urea did not alter the SIF pattern. During IT the major component of enterotoxin migrated ahead of the minor component. The 2 proteins were completely separated. Isotachophoretic separations required 0·023 M-phosphate pH 6·0 as the leading ion, 0·079 M-Tris as the counter-ion, 0·2 M-glycine (in Tris pH 8·1) as the terminating ion, 30 γ carrier ampholytes pH 3·5–10, 263 μg enterotoxin, 4% acrylamide and a current of 5 mA per gel column.     

Characterization of partially purified alcohol dehydrogenase from Rhodococcus sp. strain GK1

An NAD-dependent secondary alcohol dehydrogenase (ADH) produced by Rhodococcus sp. GK1 was purified about fivefold with a yield of 82% by hydrophobic interaction chromatography. This enzyme reduced monoketones, diketones and α-dicarbonyl compounds ; it oxidized secondary alcohols but not primary alcohols. Optimum pH was 7·0 or 8·5 for reduction or oxidation of substrates, respectively, and optimal temperature for activity was 55 °C. The apparent molecular mass of ADH was about 60 kDa by gel filtration chromatography.     

Habituation to alkali in Escherichia coli

Escherichia coli grown at pH 9·0 was much more resistant to extremes of alkaline pH (10·5–11·5) than when grown at pH 7·0. This is termed habituation to alkali. It was not due to ability to reduce the pH of the medium during exposure but was due to a phenotypic change during growth at pH 9·0. Habituation occurred within 60 min at pH 9·0.     

Induction of acid tolerance at neutral pH in log-phase Escherichia coli by medium filtrates from organisms grown at acidic pH

Escherichia coli grown at pH 5·0 became acid-tolerant (acid-habituated) but, in addition, neutralized medium filtrates from cultures of E. coli grown to log-phase or stationary-phase at pH 5·0 (pH 5·0 filtrates) induced acid tolerance when added to log-phase E. coli growing at pH 7·0. In contrast, filtrates from pH 7·0-grown cultures were ineffective. The pH 5·0 filtrates were inactivated by heating in a boiling water-bath but there was less activity loss at 75 °C. Protease also inactivated such filtrates, which suggested that a heat-resistant protein (or proteins) in the filtrates was essential for the induction of acid tolerance. Filtrates from cells grown at pH 5·0 plus phosphate or adenosine 3':5'-cyclic monophosphate (cAMP) were much less effective in inducing acid tolerance, while the conversion of pH 7·0-grown log-phase cells to acid tolerance by pH 5·0 filtrates was inhibited by cAMP and bicarbonate. It seems likely that the acid tolerance response (acid habituation) involved the functioning of the extracellular protein(s) as protease reduces tolerance induction if added during acid habituation. Most inducible responses are believed to involve the functioning of only intracellular reactions and components ; the present results suggest that this is not the case for acid habituation, as an extracellular protein (or proteins) is needed for induction.     

Characterization and purification of a new bacteriocin with a broad inhibitory spectrum produced by Lactobacillus plantarum lp 31 strain isolated from dry-fermented sausage

Aims:  Characterization and purification of a new bacteriocin produced by Lactobacillus plantarum LP 31 strain, isolated from Argentinian dry-fermented sausage.
Methods and Results:  Lactobacillus plantarum LP 31 strain produces an antimicrobial compound that inhibits the growth of food-borne pathogenic bacteria. It was inactivated by proteolytic enzymes, was stable to heat and catalase and exhibited maximum activity in the pH range from 5·0 to 6·0. Consequently, it was characterized as a bacteriocin. It was purified by RP (reverse-phase) solid-phase extraction, gel filtration chromatography and RP-HPLC. Plantaricin produced by Lact. plantarum LP 31 is a peptide with a molecular weight of 1558·85 Da as determined by Maldi-Tof mass spectrometry and contains 14 amino acid residues. It was shown to have a bactericidal effect against Pseudomonas sp., Staphylococcus aureus , Bacillus cereus and Listeria monocytogenes.
Conclusions:  The bacteriocin produced by Lact. plantarum LP 31 may be considered as a new plantaricin according to its low molecular weight and particular amino acid composition.
Significance and Impact of the Study:  In view of the interesting inhibitory spectrum of this bacteriocin and because of its good technological properties (resistance to heat and activity at acidic pH), this bacteriocin has potential applications as a biopreservative to prevent the growth of food-borne pathogens and food spoilage bacteria in certain food products.     

An extracellular stress-sensing protein is activated by heat and u.v. irradiation as well as by mild acidity, the activation producing an acid tolerance-inducing protein

During growth of Escherichia coli in broth at pH 5·0, an extracellular protein termed an extracellular induction component (EIC) appears in the medium, this component being essential for acid tolerance induction. The present study establishes that the EIC arises from an extracellular precursor which is formed during growth at pH 7·0, and that conversion of the precursor to the EIC occurs at pH 5·0 (and other mildly acidic pH values) in the absence of organisms. On the basis that this precursor is produced by non-stressed cells as well as by stressed ones, and that it is converted to the EIC (which in turn induces the tolerance response) by the stress, the precursor can be considered to be a stress sensor, the first extracellular stimulus sensor to be reported. The EIC formed at pH 5·0 was inactivated at pH 9·0. This inactivation probably involved conversion back to the precursor as EIC was reformed if the alkali-inactivated component was incubated at pH 5·0. Both mild heat treatments (exposure to 40–55 °C) and u.v. irradiation also activated the precursor; the active induction component formed by the mild heat treatments was reversibly inactivated at pH 9·0 and so it seems likely that the component formed by heat treatment is similar or identical to the EIC produced at acidic pH. In contrast, the EIC produced by u.v. irradiation was not inactivated at pH 9·0, suggesting that it is different in some way to the EICs produced from the precursor by acidity or by heat treatment. It is likely that many responses affecting stress tolerance involve the functioning of such extracellular sensors, as similar components were shown to be involved in the acid tolerance responses induced at pH 7·0 by glucose, l -aspartate and l -glutamate. Extracellular stimulus sensors may also be needed for other inducible responses.     

Production and partial characterization of the exopolysaccharide from Pleurotus sajor caju

Microbial exopolysaccharides (EPSs) are very important because they are used in biotechnological applications in different industrial areas. The aim of the study was to determine the best EPS producer Pleurotus sp., to optimize EPS production and to perform partial purification and characterization of the produced EPS. After the production conditions were optimized, the EPS was isolated and partially purified. EPS was characterized by HP-TLC, 1H-NMR, FT-IR, and TGA. Hydroxyl, superoxide, and DPPH radical scavenging activities of the EPS were also investigated spectrophotometrically. The best EPS producer and its incubation period in submerged fermentation were determined as Pleurotus sajor caju and on 5 days, respectively. Culture conditions to increase EPS production were optimized as follows (in per liter): 90 g of glucose, 10 g of yeast extract, 10 g of peptone, and 100 mM of Mg2+. The optimal initial pH, temperature, and an agitation rate of culture were determined as 5.0, 25 °C, and 150 rate min−1, respectively. The highest EPS production was determined as 33.32 ± 1.6 g L−1. After isolation of EPS, one active fraction was obtained by gel filtration chromatography. EPS is composed mainly of glucose according to HP-TLC analysis. To the results, EPS had a complex structure by having carbohydrate and protein contents. The produced EPS had high degradation temperature as well as high antioxidant activity.     

The production-influencing factors of extracellular polysacchadde(EPS) from a Strain of lactic acid bacteria and EPS extraction

The influencing factors of extracellular polysaccharide(EPS)produced from a strain of lactic acid bacteria(LAB L15)were studied by using the phenol-H2SO4 method.It was demonstrated that the strain produced EPS at the most amount when it was incubated for 40-48 h and when the pH value was 4 under 30℃.Glucose was the most suitable carbon source for LAB-producing EPS.The rough EPS was obtained from L15 culture after centrifugation,dialysis,deprotein,decoloration,and ethanol-precipitation.The sample was at least composed of two polysaccharides mat were completely different in molecular weight and the amount.The purified EPS was passed through the SephadexG-200 colunm and it showed that it was a sample purified by thin layer chromatography.     

Studies in polysaccharide production and growth of Azotobactervinelandii MTCC 2459, a plant rhizosphere isolate

Azotobacter vinelandii MTCC 2459, a novel exopolysaccharide (EPS) producer, was isolated from Nelumbium nelumbo (lotus) stem. The EPS produced has a sugar composition different from the existing industrial gums (glucose, galactose and rhamnose). Optimization of the basal medium composition and other physical parameters (viz. pH, temperature, time, etc.) are reported in this paper. A final yield of 16·5% of the amount of the carbon source supplied was obtained in shake flask cultures, indicating the potential of the organism for production of useful EPS on a large (industrial) scale.     

Heat resistance of Salmonella enteritidis PT4: the influence of prior exposure to alkaline conditions

Salmonella enteritidis phage type 4 incubated in broth at pH 9·2 ± 0·2 for 5 min or longer became significantly more heat-resistant ( P < 0·001) when subsequently heated at pH 7·0 but not when heated at pH 9·0. The induction of enhanced heat resistance was not associated with an increase in cell numbers, occurred rapidly and was probably phenotypic.     

Survival and reproductive performance of the desert pupfish, Cyprinodon n. nevadensis (Eigenmann and Eigenmann), in acid waters

Desert pupfish, Cyprinodon n. nevadensis , were exposed to pH levels of 8·3 (control), 7·0, 6·5, 6·0, 5·5 and 5·0 to determine the effects of acidity on reproduction. Egg production was significantly reduced at every pH level tested below the control. Egg-laying virtually ceased at pH 5·0, while egg viability was reduced to less than 50% of the control value at pH 6·5, when eggs were tested at the same pH at which they were laid. The 96 h LC₅₀ for this species was pH 4·56, considerably below that for successful reproduction. Larvae were less tolerant to acid stress than were adults.
Acclimation of reproductive performance to increased acid levels did not occur. Reproductive performance did not fully recover to control levels when the fish were placed in more favourable conditions after prolonged exposure to low pH.
Reduction in the number and development of oocytes was observed in the ovaries of acid stressed fish resulting in the decreased reproductive potential.     

Minimal Medium Recovery of Thermally Injured Salmonella senftenberg 4969

Exposure of Salmonella senftenberg 4969 to sublethal heating in phosphate buffer, pH 7·0, at 52· produced thermally injured cells characterized by their relative inability to form colonies on trypticase soy yeast extract agar compared to minimal medium (M9) agar. During subsequent incubation at 37· in liquid media, more injured cells were capable of repair in M9 than in nutrient media used for pre-enrichment purposes. M9 was superior to lactose broth as a liquid holding medium to restore the ability of injured cells to grow on both rich and selective agar media. The addition of food products produced a more favourable environment for the repair of thermally injured cells in M9 rather than lactose broth. Pre-enrichment in M9 was 100 times more effective than using lactose broth as the preliminary step in the detection of S. senftenberg in laboratory pasteurized liquid egg albumen.     

Methods for the recovery of a model virus from healthcare personal protective equipment

Aims:  To develop methods for recovering a model virus (bacteriophage MS2) from healthcare personal protective equipment (PPE).
Methods and Results:  Nine eluents were evaluated for recovery of infectious MS2 from PPE: 1·5% beef extract (BE) pH 7·5 with and without 0·1% Tween 80, 1·5% BE pH 9·0 with and without 0·1% Tween 80, 3% BE pH 7·5 with and without 0·1% Tween 80, 3% BE pH 9·0 with and without 0·1% Tween 80 and PBS with 0·1% Tween 80. Methods were applied to experimentally contaminated PPE. Elution followed by two-step enrichment assay could recover virus inputs as low as 1·5 log₁₀, and could recover >90% of inoculated virus from used items of experimentally contaminated PPE worn by human volunteers.
Conclusions:  BE was effective for recovering infectious viruses from a range of PPE materials.
Significance and Impact of the Study:  PPE plays a crucial role in interrupting transmission of infectious agents from patients to healthcare workers (HCWs). The fate of micro-organisms when PPE is removed and disposed of has important consequences for infection control. Methods described here can be used to conduct rigorous studies of viral survival and transfer on PPE for risk assessments in infection control and HCW protection.