The origin of transfer (oriT) of the conjugative plasmid R46: characterization by deletion analysis and DNA sequencing

Summary The origin of transfer (oriT) is the sequence within which conjugal transfer of plasmid DNA is initiated, and is absolutely required in cis for plasmid mobilization. We have cloned oriT from the 52 kb IncN plasmid R46 on a 600 bp fragment, and mapped the limits of the relevant sequence by deletion analysis and transposon mutagenesis. The nucleotide sequence of the oriT region contains 13 direct repeats of an 11 bp consensus sequence, 3 different pairs of 10 bp inverted repeats, and a segment that is extremely A-T rich. The direct repeats are within a region required for high frequency transfer and their sequence is such that their periodic alignment along the helix may induce curvature of the DNA. Analysis of Tn1725 insertions within the sequenced fragment of R46 revealed that, unlike most other transposons, transposition of Tn1725 can cause target sequence duplications of three different sizes.     

Site-specific deletion at the replication origin of the antibiotic resistance factor R1

Summary The recombinant plasmid pRK101 carrying the complete replication origin of the antibiotic resistance factor R1 suffers frequently a deletion of 218 base pairs, removing parts or all of the origin sequence. This deletion seems to occur always when the Pst-E fragment carrying the replication origin is inserted into the cloning vector pBR322 in an orientation where the direction of R1 replication is the same as that of the vector plasmid and frequently when it is inserted in the opposite direction. DNA sequence analysis around the junction site generated by the deletion in three independently isolated deletion mutants reveals that the deletion occurs at a specific site, namely the end of a 22 bp sequence which is repeated almost identically at the other end of a segment of 197 bp. During the deletion one repeat unit is removed whereas the other is retained. The DNA sequence included by the two repeats contains high symmetric structures, i.e. inverted repeats, direct repeats and palindromes which may represent regulatory sites of the origin.     

Characterization of Multiple Regions Involved in Replication and Mobilization of Plasmid pNZ4000 Coding for Exopolysaccharide Production in Lactococcus lactis

We characterized the regions involved in replication and mobilization of the 40-kb plasmid pNZ4000, encoding exopolysaccharide (EPS) production in Lactococcus lactis NIZO B40. The plasmid contains four highly conserved replication regions with homologous rep genes (repB1, repB2, repB3, and repB4) that belong to the lactococcal theta replicon family. Subcloning of each replicon individually showed that all are functional and compatible in L. lactis. Plasmid pNZ4000 and genetically labeled derivatives could be transferred to different L. lactis strains by conjugation, and pNZ4000 was shown to be a mobilization plasmid. Two regions involved in mobilization were identified near two of the replicons; both included an oriT sequence rich in inverted repeats. Conjugative mobilization of the nonmobilizable plasmid pNZ124 was promoted by either one of these oriT sequences, demonstrating their functionality. One oriT sequence was followed by a mobA gene, coding for a trans-acting protein, which increased the frequency of conjugative transfer 100-fold. The predicted MobA protein and the oriT sequences show protein and nucleotide similarity, respectively, with the relaxase and with the inverted repeat and nic site of the oriT from the Escherichia coli plasmid R64. The presence on pNZ4000 of four functional replicons, two oriT sequences, and several insertion sequence-like elements strongly suggests that this EPS plasmid is a naturally occurring cointegrate.     

Initiation and termination of DNA transfer at F plasmid oriT

DNA sequences within the F plasmid transfer origin (oriT) were tested for their ability to initiate or terminate conjugal transfer. Mutant and wild-type oriT elements were cloned as direct repetitions flanking the rpsL gene on a pBR322-based plasmid, and the frequency of deletion of this segment during matings sponsored by F’lac (F42) with streptomycin-resistant recipients was measured. Shortened oriT elements that lacked adjacent TraM-binding sites allowed efficient initiation and termination. Some truncated orir segments lacking the TraM-binding sites and the TraY-binding site, sbyA, initiated transfer inefficiently, but nevertheless promoted efficient termination. Removal of TraM-, TraY-, and IHF-binding sites severely reduced both nicking and termination. Point mutations that previously had been reported to prevent nicking caused reduced levels of both initiation and termination. These results indicate that regions of oriT supporting initiation are more extensive than those needed for termination, although some regions are required for both. Moreover, termination can be effective for some mutant loci that do not support efficient nicking.     

Initiation and termination of DNA transfer during conjugation of IncI1 plasmid R64: roles of two sets of inverted repeat sequences within oriT in termination of R64 transfer

Intercellular transfer of plasmid DNA during bacterial conjugation initiates and terminates at a specific origin of transfer, oriT. We have investigated the oriT structure of conjugative plasmid R64 with regard to the initiation and termination of DNA transfer. Using recombinant plasmids containing two tandemly repeated R64 oriT sequences with or without mutations, the subregions required for initiation and termination were determined by examining conjugation-mediated deletion between the repeated oriTs. The oriT subregion required for initiation was found to be identical to the 44-bp oriT core sequence consisting of two units, the conserved nick region sequence and the 17-bp repeat A sequence, that are recognized by R64 relaxosome proteins NikB and NikA, respectively. In contrast, the nick region sequence and two sets of inverted repeat sequences within the 92-bp minimal oriT sequence were required for efficient termination. Mutant repeat A sequences lacking NikA-binding ability were found to be sufficient for termination, suggesting that the inverted repeat structures are involved in the termination process. A duplication of the DNA segment between the repeated oriTs was also found after mobilization of the plasmid carrying initiation-deficient but termination-proficient oriT and initiation-proficient but termination-deficient oriT, suggesting that the 3' terminus of the transferred strand is elongated by rolling-circle-DNA synthesis.     

Structural plasmid instability in Bacillus subtilis: Effect of direct and inverted repeats

Summary Using precise excision as a model system, we have quantified the effect of direct repeats, inverted repeats and the size of the spacer between the repeats in the process of deletion formation in Bacillus subtilis. Both in the presence and absence of inverted repeats, the frequency of precise excision was strongly dependent on the direct repeat length. By increasing the direct repeat length from 9 bp to 18 and 27 bp, the precise excision frequency was raised by 3 and 4 orders of magnitude, respectively. In addition, irrespective of the direct repeat length, the presence of flanking inverted repeats enhanced the excision frequency by 3 orders of magnitude. Varying the inverted repeat length and the spacer size over a wide range did not significantly affect the excision frequencies. These results fit well into a model for deletion formation by slipped mispairing during replication of single-stranded plasmid DNA.     

Site-specific integration of foreign DNA into minimal bacterial and human target sequences mediated by a conjugative relaxase

Background

Bacterial conjugation is a mechanism for horizontal DNA transfer between bacteria which requires cell to cell contact, usually mediated by self-transmissible plasmids. A protein known as relaxase is responsible for the processing of DNA during bacterial conjugation. TrwC, the relaxase of conjugative plasmid R388, is also able to catalyze site-specific integration of the transferred DNA into a copy of its target, the origin of transfer (oriT), present in a recipient plasmid. This reaction confers TrwC a high biotechnological potential as a tool for genomic engineering.

Methodology/Principal Findings

We have characterized this reaction by conjugal mobilization of a suicide plasmid to a recipient cell with an oriT-containing plasmid, selecting for the cointegrates. Proteins TrwA and IHF enhanced integration frequency. TrwC could also catalyze integration when it is expressed from the recipient cell. Both Y18 and Y26 catalytic tyrosil residues were essential to perform the reaction, while TrwC DNA helicase activity was dispensable. The target DNA could be reduced to 17 bp encompassing TrwC nicking and binding sites. Two human genomic sequences resembling the 17 bp segment were accepted as targets for TrwC-mediated site-specific integration. TrwC could also integrate the incoming DNA molecule into an oriT copy present in the recipient chromosome.

Conclusions/Significance

The results support a model for TrwC-mediated site-specific integration. This reaction may allow R388 to integrate into the genome of non-permissive hosts upon conjugative transfer. Also, the ability to act on target sequences present in the human genome underscores the biotechnological potential of conjugative relaxase TrwC as a site-specific integrase for genomic modification of human cells.     

Cloning and characterization of a linear 2.3 kb mitochondrial plasmid of maize

Summary A linear 2.3 kb DNA molecule found in maize mitochondria was cloned into pUC8. A natural deletion of this plasmid, found in cmsT and some N (fertile) types of maize plants, was mapped to one end of the plasmid. A minor sequence homology to S-2, another linear mitochondrial plasmid, was detected, as well as more significant sequence homology with chloroplast and maize nuclear DNA. Hybridization to teosinte mitochondrial DNA (mtDNA) revealed the presence of part of the maize plasmid in the high molecular weight mtDNA of the maize relatives. RNA dot hybridization indicates that the plasmid is transcribed in mitochondria. The termini of the 2.3 kb linear plasmid contain inverted repeated sequences; of the first 17 nucleotides of the termini, 16 are identical to the terminal inverted repeats of the linear S plasmids found in the mitochondria of cmsS maize plants.     

Plasmid deletion formation between short direct repeats in Bacillus subtilis is stimulated by single-stranded rolling-circle replication intermediates

Summary The effects of the rolling-circle mode of replication and the generation of single-stranded DNA (ss DNA) on plasmid deletion formation between short direct repeats in Bacillus subtilis were studied. Deletion units consisting of direct repeats (9, 18, or 27 bp) that do or do not flank inverted repeats (300 bp) were introduced into various plasmid replicons that generate different amounts of ss DNA (from 0% to 40% of the total plasmid DNA). With ss DNA-generating rolling-circle-type plasmids, deletion frequencies between the direct repeats were 3- to 13-fold higher than in plasmids not generating ss DNA. When the direct repeats flanked inverted repeats the deletion frequencies in ss DNA-generating plasmids were increased by as much as 20- to 140-fold. These results support models for deletion formation based on template-switching errors during complementary strand synthesis of rolling-circle-type plasmids. The structural instability (deletion formation between short direct repeats) of the ss DNA-generating plasmid pTA1060 in B. subtilis was very low in the presence of a functional initiation site for complementary strand synthesis (minus origin). This observation suggests that it will be possible to develop stable host-vector cloning systems for B. subtilis.     

A deletion derivative of the kalilo senescence plasmid forms hairpin and duplex DNA structures in the mitochondria of Neurospora.

Summary A novel deletion derivative, kal, of the kalilo senescence plasmid from Neurospora intermedia, was recovered from a culture treated with chloramphenicol. The deletion derivative exists in mitochondria as two different, equally abundant forms: a 2.8 kb duplex DNA molecule kal-2.8) and a 1.4 kb hairpin form kal-1.4). The kal-2.8 plasmid contains the 1366 by terminal inverted repeats and a partially duplicated 102 by segment of the unique sequence of the 8.6 kb kalilo plasmid. In contrast, the kal-1.4 hairpin plasmid appears to result from the folding of single strands that are generated during the replication of kal-2.8. Both forms of kal have covalently linked terminal proteins. Sequence analysis suggests that kal was generated either by slippage of the tip of a growing strand during the replication of kalilo, or by illegitimate recombination between two copies of the plasmid at non-homologous palindromic sequences that might form cruciform structures. In either case, the deletion process was mediated at least in part by an inverted repeat of 5 by in the unique region of kalilo. Since the terminal segments of kalilo DNA that are implicated in plasmid integration might also form cruciform structures, it is possible, but improbable, that the process that generated the first kal molecule is related to that which mediates integration of the plasmid into mitochondrial DNA.     

Mobilisation of the streptococcal plasmid pMV158: interactions of MobM protein with its cognate oriT DNA region.

The streptococcal plasmid pMV158 encodes the relaxase protein, MobM, involved in its mobilisation. Purified MobM protein specifically cleaved supercoiled or single-stranded DNA containing the plasmid origin of transfer, oriT. Gel retardation and DNase I footprinting assays performed with DNA fragments containing the plasmid oriT provided evidence for specific binding of MobM by oriT DNA. Dissection of the MobM-binding sequence revealed that the oriT region protected by MobM spanned 28 nucleotides, and includes an inversely repeated sequence, termed IR2. MobM exhibits a high degree of similarity with the mob gene product of the Streptococcus ferus plasmid pVA380-1. Although the origins of transfer of pMV158 and pVA380-1 show 20% sequence divergence in a 24-bp sequence included in their oriT regions, the pMV158 MobM was able to cleave a supercoiled derivative of pVA380-1 in vitro. Received: 12 October 1998 / Accepted: 28 February 1999     

Asymmetry of shufflon-specific recombination sites in plasmid R64 inhibits recombination between direct sfx sequences

The shufflon of plasmid R64 consists of four DNA segments separated and flanked by seven sfx recombination sites. Rci-mediated recombination between any inverted sfx sequences causes inversion of the DNA segments independently or in groups. The R64 shufflon selects one of seven pilV genes encoding type IV pilus adhesins, in which the N-terminal region is constant, while the C-terminal regions are variable. The R64 sfx sequences are asymmetric. The sfx central region and right arm sequences are conserved, but left arm sequences are not. Here we constructed a symmetric sfx sequence, in which the sfx left arm sequence was changed to the inverted repeat of the right arm sequence and made artificial shufflon segments carrying symmetric sfx sequences in inverted or direct orientations. The symmetric sfx sequence exhibited the highest inversion frequency in a shufflon segment flanked by two inverted sfx sequences. Rci-dependent deletion of a shufflon segment flanked by two direct symmetric sfx sequences was observed, suggesting that asymmetry of R64 sfx sequences inhibits recombination between direct sfx sequences. In addition, intermolecular recombination between symmetric sfx sequences was also observed. The extra C-terminal domain of Rci was shown to be essential for inversion of the R64 shufflon using asymmetric sfx sequences but not essential for recombination using symmetric sfx sequences, suggesting that the Rci C-terminal segment helps the binding of Rci to asymmetric sfx sequences. Rci protein lacking the C-terminal domain bound to both arms of symmetric sfx sequence but only to the right arm of asymmetric sfx sequence.     

Characterization of a circular plasmid from the yeast Kluyveromyces waltii.

A new plasmid was found in the yeast Kluyveromyces waltii. This high-copy-number plasmid, named pKW1, is a double-stranded circular DNA plasmid of 5619 bp. It has several features characteristic of the 2 mu-type plasmids: presence of two inverted repeats and four open reading frames, as well as the interconversion of two isomeric forms. However, the nucleotide sequence shows little homology with known yeast plasmids. An ARS function was localized within a segment of 545 bp near one of the inverted repeats. Chimeric plasmids carrying this segment efficiently transformed K. waltii. A strain of K. waltii cured of the plasmid (cir degree) was also obtained. In the pKW1 sequence, a functionally neutral region was found at which foreign DNA can be inserted with little effect on plasmid stability. Such constructions carrying the full sequence of pKW1 replicated autonomously in a cir degree host and were particularly stable. pKW1-derived full-sequence plasmids also transformed K. thermotolerans, but not K. lactis.     

Nucleotide sequence of the dihydrofolate-reductase gene borne by the plasmid R67 and conferring methotrexate resistance

The complete nucleotide sequence of the methotrexate-resistant dihydrofolate reductase (DHFR) gene borne by the plasmid R67 was determined. The gene is 234 bp long and codes for 78 amino acids. The polypeptide deduced from the DNA sequence is in perfect agreement with the previously published amino acid sequence. Comparison of the nucleotide sequence with the one determined for the R388-encoded DHFR indicates that 75% of the nucleotides are conserved in the two genes. The 3′ end of the R67 gene can be modified without altering significantly the activity of the enzyme.     

Site-specific recombinase, R, encoded by yeast plasmid pSR1.

The R gene product (R protein) of Zygosaccharomyces rouxii plasmid pSR1 catalyzes site-specific recombination within a 58 base-pair (bp) sequence present in the 959 bp inverted repeats of this plasmid. The R protein was produced in Escherichia coli and partially purified. The partially purified protein catalyzed site-specific recombination in vitro without the supply of an energy source. Recombination resulted in intramolecular inversion or deletion, depending on whether the orientations of the two recombination sites on the substrate plasmid were the same or opposite. Presumably, R protein is the only protein required for the recombination reaction. A circular DNA molecule appears to be a better substrate than a linear molecule in R-mediated in vitro intramolecular recombination. The R protein binds to a set of six 12 bp elements within the inverted repeats of pSR1. Two of these 12 bp elements are arranged in an inverted configuration with a 7 bp spacer in the 58 bp sequence. The R protein mediates strand cleavage in vitro at the junction between the 12 bp elements and the 7 bp spacer. The cleavage sites on the top and bottom strands are staggered and flanked by polypurine tracts that form part of the 12 bp elements.     

Integrative suppression of dnaA46 by broad host-range plasmid R1162

Summary Replication of plasmid R1162 DNA does not require the product of the dnaA gene. An integrated copy of the plasmid can suppress the temperature-sensitive dnaA46 allele when (1) additional plasmid copies are present in the cytoplasm and (2) an inactive replication origin, generated by deletion, is also present in the chromosome. We propose that the inactive origin sets the rate of initiation of chromosome replication at a level compatible with cell viability, possibly by providing additional binding sites for an R1162-encoded protein that is rate-limiting for plasmid replication.     

The Bacteroides fragilis BtgA Mobilization Protein Binds to the oriT Region of pBFTM10

The Bacteroides fragilis conjugal plasmid pBFTM10 contains two genes, btgA and btgB, and a putative oriT region necessary for transfer in Bacteroides fragilis and Escherichia coli. The BtgA protein was predicted to contain a helix-turn-helix motif, indicating possible DNA binding activity. DNA sequence analysis of the region immediately upstream of btgA revealed three sets of inverted repeats, potentially locating the oriT region. A 304-bp DNA fragment comprising this putative oriT region was cloned and confirmed to be the functional pBFTM10 oriT by bacterial conjugation experiments using E. coli and B. fragilis. btgA was cloned and overexpressed in E. coli, and the purified protein was used in electrophoretic mobility shift assays, demonstrating specific binding of BtgA protein to its cognate oriT. DNase I footprint analysis demonstrated that BtgA binds apparently in a single-stranded fashion to the oriT-containing fragment, overlapping inverted repeats I, II, and III and the putative nick site.