Immobilization of cellulases on the reversibly soluble polymer Eudragit S‐100 for cotton treatment

Cellulases can penetrate into the fiber, causing tensile strength loss of the cellulosic fibers or fabrics. To minimize the tensile strength loss, we have immobilized cellulases on Eudragit S‐100. The characteristics of covalent Eudragit cellulase were evaluated using gel filtration analysis and UV spectra. Gel filtration analysis revealed that the cellulases were covalently bound to the polymer. Covalent Eudragit cellulase was loaded with the enzyme of about 40% and had a relative activity about 80% at a Eudragit S‐100 concentration of 15 g/L. When cellulase is bound to the polymer, the solubility profile becomes similar to the one of Eudragit. In addition, the effects of the enzyme on the cotton yarns and fabric using cellulases have been investigated. Native and immobilized cellulases caused improvements in whiteness and wrinkle recovery angle of the fabric in comparison to the control samples. The bending stiffness results show that native and immobilized cellulase treated cotton fabric has an improved softness than the control samples. It was found that using the immobilized cellulase reduced the weight and tensile strength, because the hydrolytic attack is only limited to the surfaces of cotton fibers.     

Application and characterization of magnetic chitosan microspheres for enhanced immobilization of cellulase

In this study, a unique carrier magnetic chitosan microspheres (MCTS) was simply synthesized by anchoring Fe₃O₄ onto chitosan for direct immobilization of cellulases cross-linked by gluteraldehye. The structure and morphology were characterized using FT-IR, TGA, VSM and SEM. The optimum immobilization conditions were investigated: immobilized pH 7.0, amount of enzyme 15?mL (0.1?mg/mL), immobilization temperature 30?°C, immobilization time 5?h. At optimum conditions, MCTS achieved maximum enzyme solid loading rate of 73.5?mg/g, while recovery of enzyme activity approached to 71.6%. In the recycle test, immobilized cellulases operated without significant loss in its initial performances after 3 cycles, which indicated that immobilized cellulases can be regenerated and reused. The immobilized enzyme has better values of thermal and storage stability than that of free enzyme. Therefore, MCTS may be considered as a candidate with potential value of application in large-scale operations for cellulases immobilization.     

Evaluation of a silica-coated magnetic nanoparticle for the immobilization of a His-tagged lipase

Magnetic particles of size 10 nm have been coated with silica to a mean diameter of 40 nm and charged with Cu²⁺ ions via a multidentate ligand, iminodiacetic acid (IDA), for the immobilization of His-tagged Bacillus stearothermopilus L1 lipase. Microporous (average pore diameter of 60 Å) silica gel with a mean particle diameter of 115 µm has been used as a comparative support material. The molar ratio of Cu²⁺ to IDA was found to be 1:1.14 and 1:1.99 in the silica gel and the silica-coated magnetic nanoparticles (SiMNs), respectively. The specific activity of the immobilized enzyme was found to conform to the following order: Cu²⁺-charged SiMN>SiMN>Cu²⁺-charged silica gel>silica gel. When it was immobilized on the Cu²⁺-charged SiMNs, over 70% of the initial activity of the lipase remained after it had been reused five times. However, only 20% of the initial activity remained after the enzyme immobilized on the Cu²⁺-charged silica gel had been reused five times. For the enzyme immobilized on supports without Cu²⁺ cations, all activity was lost after threefold reuse. The differences in the specific activities and the efficiencies of reuse of the enzymes immobilized on the various support materials are discussed in terms of immobilization mechanisms (physical adsorption vs. coordination bonding), mass transfer of a substrate and a product of the enzyme reaction, and the status of the Cu (Cu bound to the IDA on the silica layer vs. Cu directly adsorbed on the silica layer).     

铜金属螯合载体固定糖化酶

[目的]制备出含Cu2+的琼脂糖-IDA螯合载体及对其固定糖化酶工艺条件进行优化.[方法]利用金属螯合配体(IDA-Cu2+)与蛋白质表面供电子氨基酸相互作用的原理制备载体,采用紫外分光光度法测定不同影响因素下固定化糖化酶的酶活.[结果]Cu2+的加入量和固定化过程的酸度比给酶量对固定化糖化酶的活性影响还要大,在给酶量80 mg/g载体、1.0× 10-2 mol Cu2+/g载体、pH 4.6和固定化4h的固定化条件下,固定化酶活为252.1 U/g,重复使用5次后酶活为首次固定化酶活的65.1％.[结论]该Cu2+-IDA-金属螯合琼脂糖可用于淀粉水解糖化酶的优良固定化载体材料.     

A Simple Method for Beta-glucosidase Immobilization and Its Application in Soybean Isoflavone Glycosides Hydrolysis

In this study, a simple, inexpensive and fast β-glucosidase immobilization system was constructed and evaluated in isoflavone glycosides hydrolysis. A β-glucosidase gene from Thermoascus aurantiacus IFO9748 was recombinantly expressed in Pichia pastoris KM71H and immobilized on regenerated amorphous cellulose (RAC) by fused cellulose binding module 3. Through simple mixing cellulose and crude enzyme for 15 min under room temperature, 96.04% β-glucosidase was immobilized onto RAC. The optimum temperature for β-glucosidase activity was increased by 5ºC after immobilization. The half-life (t½) of heat inactivation of immobilized enzyme at 60oC was improved over 8 folds. After 30 rounds recycled at 40oC, 96.9% daidzin and 98.9% genistin could still be hydrolyzed. A continuous hydrolysis system was also constructed, and at the flow rate of 0.2 mL/min after 30 h hydrolysis, 95.6% genistin and 90.2% daidzin can still be hydrolyzed. Combined the simple and high efficient enzyme immobilization procedure and inexpensive cellulose, this scalable and practical system may have broad prospects for industrial utilization.     

Development of novel robust nanobiocatalyst for detergents formulations and the other applications of alkaline protease

Alkaline protease from alkaliphilic Bacillus sp. NPST-AK15 was immobilized onto functionalized and non-functionalized rattle-type magnetic core@mesoporous shell silica (RT-MCMSS) nanoparticles by physical adsorption and covalent attachment. However, the covalent attachment approach was superior for NPST-AK15 protease immobilization onto the activated RT-MCMSS-NH₂ nanoparticles and was used for further studies. In comparison to free protease, the immobilized enzyme exhibited a shift in the optimal temperature and pH from 60 to 65 °C and pH 10.5–11.0, respectively. While free protease was completely inactivated after treatment for 1 h at 60 °C, the immobilized enzyme maintained 66.5 % of its initial activity at similar conditions. The immobilized protease showed higher k _cat and K _m , than the soluble enzyme by about 1.3-, and 1.2-fold, respectively. In addition, the results revealed significant improvement of NPST-AK15 protease stability in variety of organic solvents, surfactants, and commercial laundry detergents, upon immobilization onto activated RT-MCMSS-NH₂ nanoparticles. Importantly, the immobilized protease maintained significant catalytic efficiency for ten consecutive reaction cycles, and was separated easily from the reaction mixture using an external magnetic field. To the best of our knowledge this is the first report about protease immobilization onto rattle-type magnetic core@mesoporous shell silica nanoparticles that also defied activity-stability tradeoff. The results clearly suggest that the developed immobilized enzyme system is a promising nanobiocatalyst for various bioprocess applications requiring a protease.     

Activation of subtilisin Carlsberg in hexane by lyophilization in the presence of fumed silica

Subtilisin Carlsberg (SC) was lyophilized from an aqueous buffer solution containing different amounts of unmodified commercial fumed silica. The activity of the enzyme/fumed silica preparation in hexane was compared to pure freeze-dried enzyme, and to a freeze-dried preparation reported in the literature with potassium chloride as additive. A sharp increase in enzyme activity was found to correlate with an increasing amount of fumed silica added to the enzyme solution prior to freeze-drying. A weight-ratio of 98.5 wt.% fumed silica relative to the mass of the final enzyme/fumed silica preparation led to about 130-fold increased activity of SC in hexane (when compared to pure lyophilized SC in hexane). This is about twice the activation effect compared to including potassium chloride in the buffer solution before freeze-drying [1]. When freezing at −20 °C instead of in liquid nitrogen, even better activation was observed with fumed silica. We hypothesize that the activation of SC in hexane by immobilization of the enzyme on fumed silica is likely due to the distribution of the enzyme on the large surface area of fumed silica. This alleviates mass transfer limitations.     

Immobilization of thermostable β-glucosidase from Sulfolobus shibatae by cross-linking with transglutaminase

Thermostable β-glucosidase from Sulfolobus shibatae was immobilized on silica gel modified or not modified with 3-aminopropyl-triethoxysilane using transglutaminase as a cross-linking factor. Obtained preparations had specific activity of 3883 U/g of the support, when measured at 70 °C using o-nitrophenyl β-d-galactopyranoside (GalβoNp) as substrate. The highest immobilization yield of the enzyme was achieved at pH 5.0 in reaction media. The most active preparations of immobilized β-glucosidase were obtained at a transglutaminase concentration of 40 mg/ml at 50 °C. The immobilization was almost completely terminated after 100 min of the reaction and prolonged time of this process did not cause considerable changes of the activity of the preparations. The immobilization did not influence considerably on optimum pH and temperature of GalβoNp hydrolysis catalyzed by the investigated enzyme (98 °C, pH 5.5). The broad substrate specifity and properties of the thermostable β-glucosidase from S. shibatae immobilized on silica-gel indicate its suitability for hydrolysis of lactose during whey processing.     

Purification,characterization and thermodynamic analysis of cellulases produced from Thermomyces dupontii and its industrial applications

Cellulases involved in the hydrolysis of cellulose and plays a vital role in different industries like textile, detergent paper and Feed industry. Cellulases have been a prospective target for research by both the academic and industrial sectors because of the intricacy of the enzyme system and the enormous industrial potential. In the present work Thermomyces dupontii, which had previously been isolated and recorded as a promising cellulase producer were used. Both endoglucanases and betaglucosidases were purified to its homogeneity by ammonium sulfate followed by anion exchange and gel filtration chromatography. The recovery and purification fold for endoglucanases and betaglucosidases were 13.7, 10.7 % and 5.9, 2.7, respectively. The molecular weight of endoglucanases and betaglucosidases were estimated as 37 and 66 kDa on SDS-PAGE. Upon kinetic analysis the purified endoglucanases and betaglucosidases showed Km 0.63; 28.56 mg/ml and Vmax 82; 80 U/ml/min, respectively. Characterization revealed that enzyme was found to be acidophilic cellulase having optimal pH of 5.5 and 70 ?C. Furthermore, cellulases were accelerated in the presence of Ca²⁺ and EDTA. The cellulases had activation energy (Ea) of ?44.55; ?50.02 kJ/mol for carboxy-methyl-cellulose hydrolysis and Enthalpy (ΔH) 42.20; 47.70 kJ/mol and entropy ΔS ?5.1 and ?5.7 kJ/mol for EG and BGL, respectively. In addition to this the enzyme had a secondary structure of protein as represented by FTIR spectrum The current study suggested that purified cellulases can be used as a detergent additive to improve washing. Furthermore, it shows the biostoning ability when applied on jean fabric.     

Immobilization of papain on cotton fabric by sol–gel method

A method has been developed to immobilize papain on cotton fabric by means of sol–gel technique. The activity of free papain and papain in silica sol under sonication was studied. Scanning electron microscopy, energy dispersive spectrometer and the Bradford method were used to characterize papain immobilization. The efficiency of the immobilization was investigated by examining the relative enzymatic activity of free and immobilized papain, respectively. The results show that the optimum pH value in the medium for immobilized papain is shifted to alkaline side. In addition, the adaptability of papain to environmental acidity is significantly increased. The thermostability of immobilized papain shows no significant change compared to the free enzyme. The papain immobilized on fabric by sol–gel technique retains more than 30% of the original activity after six reuses continuously.     

Immobilization of Penicillium vitale Pidopl. et Bilai catalase by inorganic carriers

An efficient method is developed for P. vitale catalase immobilization through the oxidized carbohydrate enzyme component, using silochrome. The method provides the enzyme binding without losing its catalytic capacity in the immobilized preparation. When the enzyme is immobilized by high-dispersed silica containing isocyanate, aldehyde groups or active atoms of chlorine, 8, 15, and 20 mg of the enzyme is bounded per 1 g of the carrier, respectively, its catalytic capacity being completely retained. A dependence is established for the degree of catalase bonding and catalytic capacity of the immobilized enzyme of the enzyme carrier ratio in immobilization. The catalytic activity of the immobilized catalase preparations reaches 2 000 Becker units/l g. The preparations are stable in storage. Some of their properties are studied.     

Immobilization ofβ-fructofuranosidase fromAureobasidium sp. ATCC 20524 on porous silica

Summary -Fructofuranosidase P-1 fromAureobasidium sp. ATCC 20524, which produces a fructo-oligosaccharide (1-kestose) from sucrose, was immobilized covalently onto alkylamine porous silica with glutaraldehyde at high efficiency (44.4%). Optimum pore diameter of porous silica for immobilization of the enzyme was 91.7 nm. The enzymatic profiles of immobilized enzyme were almost identical to the native one except its stabilities to temperature and metal ions were improved. 1-Kestose was produced continuously and selectively from 40% (w/v) sucrose at fast flow rates by a column packed with the immobilized enzyme for up to 26 days, and the effluent concentration of 1-kestose remained in the range 113–135 mg ml^–1.     

Preparation and activity of carbonic anhydrase immobilized on porous silica beads and graphite rods

Techniques for the immobilization of bovine carbonic anhydrase (BCA) on porous silica beads and graphite are presented. Surface coverage on porous silica beads was found to be 1.5 x 10(-5) mmol BCA/m(2), and on graphite it was 1.7 x 10(-3) mmol BCA/m(2) nominal surface area. Greater than 97% (silica support) and 85% (graphite support) enzyme activity was maintained upon storage of the immobilized enzyme for 50 days in pH 8 buffer at 4 degrees C. After 500 days storage, the porous silica bead immobilized enzyme exhibited over 70% activity. Operational stability of the enzyme on silica at 23 degrees C and pH 8 was found to be 50% after 30 days. Catalytic activity expressed as an apparent second-order rate constant K'(Enz) for the hydrolysis of p-nitrophenyl acetate (p-NPA) catalyzed by BCA immobilized on silica beads and graphite at pH 8 and 25 degrees C is 2.6 x 10(2) and 5.6 x 10(2) M(-1)s(-1) respectively. The corresponding K(ENZ) value for the free enzyme is 9.1 x 10(2) M(-1)s(-1). Activity of the immobilized enzyme was found to vary with pH in such a manner that the active site pK, on the porous silica bead support is 6.75, and on graphite it is 7.41. Possible reasons for a microenvironmental influence on carbonic anhydrase pK(a), are discussed. Comparison with literature data shows that the enzyme surface coverage on silica beads reported here is superior to previously reported data on silica beads and polyacrylamide gels and is comparable to an organic matrix support. Shifts in BCA-active site pK(a) values with support material, a lack of pH dependent activity studies in the literature, and differing criteria for reporting enzyme activity complicate literature comparisons of activity; however, immobilized BCA reported here generally exhibits comparable or greater activity than previous reports for immobilized BCA.     

Development of sensors for direct detection of organophosphates. Part I: Immobilization, characterization and stabilization of acetylcholinesterase and organophosphate hydrolase on silica supports

Biosensors for organophosphates in solution may be constructed by monitoring the activity of acetylcholinesterase (AChE) or organophosphate hydrolase (OPH) immobilized to a variety of microsensor platforms. The area available for enzyme immobilization is small (< 1 mm2) for microsensors. In order to construct microsensors with increased surface area for enzyme immobilization, we used a sol-gel process to create highly porous and stable silica matrices. Surface porosity of sol-gel coated surfaces was characterized using scanning electron microscopy; pore structure was found to be very similar to that of commercially available porous silica supports. Based upon this analysis, porous and non-porous silica beads were used as model substrates of sol-gel coated and uncoated sensor surfaces. Two different covalent chemistries were used to immobilize AChE and OPH to these porous and non-porous silica beads. The first chemistry used amine-silanization of silica followed by enzyme attachment using the homobifunctional linker glutaraldehyde. The second chemistry used sulfhydryl-silanization followed by enzyme attachment using the heterobifunctional linker N-gamma-maleimidobutyryloxy succinimide ester (GMBS). Surfaces were characterized in terms of total enzyme immobilized, total and specific enzyme activity, and long term stability of enzyme activity. Amine derivitization followed by glutaraldehyde linking yielded supports with greater amounts of immobilized enzyme and activity. Use of porous supports not only yielded greater amounts of immobilized enzyme and activity, but also significantly improved long term stability of enzyme activity. Enzyme was also immobilized to sol-gel coated glass slides. The mass of immobilized enzyme increased linearly with thickness of coating. However, immobilized enzyme activity saturated at a porous silica thickness of approximately 800 nm.     

Characterization of immobilized enzymes in polyurethane foams in a dynamic bed reactor

-d-Galactosidase (E 3.2.1.23) from Aspergillus oryzae was immobilized with polyurethane foam (PUF). Among several immobilization methods attempted in this work, the immobilized enzyme preparation by in-situ co-polymerization between enzyme and prepolymer HYPOL 3000 showed the highest activity. The intrinsic kinetics of PUF-immobilized enzyme was determined in a dynamic bed reactor, used to increase transport rates. The immobilization mechanism in PUF was studied by measurements of immobilized enzyme kinetics and by using scanning electron microscopy combined with immuno-gold labeling techniques. The results showed that immobilization was predominantly by covalent bonding between primary amino groups of -d-galactosidase and isocyanate groups of the prepolymers. Entrapment in the PUF micropores assisted the immobilization of enzymes, and adsorption on the surface of macropores was not important for immobilization. The bicinchoninic acid method was applied for the determination of PUF loading capacity and specific enzyme activity and used to determine enzyme deactivation during immobilization.     

Biocatalysis of immobilized chlorophyllase in a ternary micellar system.

The immobilization of chlorophyllase was optimized by physical adsorption on various inorganic supports, including alumina, celite, Dowex-1-chloride, glass beads and silica gel. The enzyme was also immobilized in different media, including water, Tris-HCl buffer solution and a ternary micellar system containing Tris-HCl buffer solution, hexane and surfactant. The highest immobilization efficiency (84.56%) and specific activity (0.34 mumol hydrolyzed chlorophyll mg protein-1 per min) were obtained when chlorophyllase was suspended in Tris-HCl buffer solution and adsorbed onto silica gel. The effect of different ratios of chlorophyllase to the support and the optimum incubation time for the immobilization of chlorophyllase were determined to be 1-4 and 60 min, respectively. The experimental results showed that the optimum pH and temperature for the immobilized chlorophyllase were 8.0 and 35 degrees C, respectively. The use of optimized amounts of selected membrane lipids increased the specific activity of the immobilized chlorophyllase by approximately 50%. The enzyme kinetic studies indicated that the immobilized chlorophyllase showed a higher affinity towards chlorophyll than pheophytin as substrate.     

Immobilization of halophilic <Emphasis Type="Italic">Bacillus</Emphasis> sp. EMB9 protease on functionalized silica nanoparticles and application in whey protein hydrolysis

The present work targets the fabrication of an active, stable, reusable enzyme preparation using functionalized silica nanoparticles as an effective enzyme support for crude halophilic Bacillus sp. EMB9 protease. The immobilization efficiency under optimized conditions was 60 %. Characterization of the immobilized preparation revealed marked increase in pH and thermal stability. It retained 80 % of its original activity at 70 °C while t _1/2 at 50 °C showed a five-fold enhancement over that for the free protease. Kinetic constants K _m and V _max were indicative of a higher reaction velocity along with decreased affinity for substrate. The preparation could be efficiently reused up to 6 times and successfully hydrolysed whey proteins with high degree of hydrolysis. Immobilization of a crude halophilic protease on a nanobased scaffold makes the process cost effective and simple.     

Improvement of the stability and selectivity of Rhizomucor miehei lipase immobilized on silica nanoparticles: Selective hydrolysis of fish oil using immobilized preparations

We report the effect of random and oriented immobilization of Rhizomucor miehei lipase (RML) on its functional properties. For this purpose, silica nanoparticles (MCM-41 and SBA-15) were prepared, characterized and functionalized by glycidyloxypropyl trimethoxysilane. Direct immobilization of RML on these supports was performed via the variety of amino acid residues on the surface of RML which promotes random immobilization. To perform oriented immobilization, partial modification of epoxy functionalized supports was carried out by introducing iminodiacetic acid groups followed by addition of Cu²⁺. In this way, immobilization is mainly directed via the most accessible histidine group, followed by intramolecular reaction of the other nucleophilic residues of the enzyme and the remaining epoxy groups on the support. The results showed higher thermal stability for immobilized derivatives compared to the soluble enzyme. Co-solvent stability of the derivatives was also studied in presence of six polar organic solvents (DMSO, THF, acetonitrile, 1-propanol, 2-propanol and dioxane). Influence of the immobilization procedure on activity and selectivity of the immobilized preparations was studied in selective hydrolysis of fish oil. All the derivatives discriminate between cis-5,8,11,14,17-eicosapentaenoic acid (EPA) and cis-4,7,10,13,16,19-docosahexaenoic acid (DHA) in favor of EPA. Remarkable improvement in selectivity was obtained using oriented immobilization of RML.     

Cross-linked esterase aggregates (CLEAs) using nanoparticles as immobilization matrix

Abstract

The present study focusses on the enhancement of the catalytic activity and stability of an acetylesterase enzyme isolated from Staphylococcus spp. as Cross-Linked Enzyme Aggregates (CLEAs). The various parameters governing the activity of CLEAs were optimized. The magnetite and graphene oxide nanoparticles were successfully prepared via the chemical co-precipitation and Hummer's method, respectively. These nanoparticles supported the preparation as magnetite nanoparticle-supported cross-Linked Enzyme Aggregates (MGNP-CLEAs) and graphene oxide-supported Cross-Linked Enzyme Aggregates (GO-CLEAs). The activity and stability of these immobilized CLEAs were compared with the free enzyme at various temperature, pH, and organic solvents along with its storage stability and reusability. The immobilized preparations were analyzed by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared spectroscopy (FT-IR) techniques. Acetylesterase precipitated with 60% saturated ammonium sulfate salt (SAS) solution and cross-linked with 100?mM glutaraldehyde for 4?h at 30?°C was found to be optimal to produce CLEAs with highest activity recovery of 99.8%. The optimal pH at 8.0 and temperature at 30?°C remained the same for both the free and immobilized enzyme, respectively. Storage stability significantly improved for the immobilized enzyme as compared to free enzyme. SEM showed type-I aggregate and FT-IR revealed the successful immobilization of the enzyme. MGNP-CLEAs were found to have better activity and stability in comparison to other immobilized preparations.