ISD1, an Insertion Element from the Sulfate-Reducing Bacterium Desulfovibrio vulgaris Hildenborough: Structure, Transposition, and Distribution

Insertion element ISD1, discovered when its transposition caused the insertional inactivation of an introduced sacB gene, is present in two copies in the genome of Desulfovibrio vulgaris Hildenborough. Southern blot analysis indicated at least two insertion sites in the sacB gene. Cloning and sequencing of a transposed copy of ISD1 indicated a length of 1,200 bp with a pair of 44-bp imperfect inverted repeats at the ends, flanked by a direct repeat of the 4-bp target sequence. AAGG and AATT were found to function as target sequences. ISD1 encodes a transposase from two overlapping open reading frames by programmed translational frameshifting at an A₆G shifty codon motif. Sequence comparison showed that ISD1 belongs to the IS3 family. Isolation and analysis of the chromosomal copies, ISD1-A and ISD1-B, by PCR and sequencing indicated that these are not flanked by direct repeats. ISD1-A is inserted in a region of the chromosome containing the gapdh-pgk genes (encoding glyceraldehyde-3-phosphate dehydrogenase and phosphoglycerate kinase). Active transposition to other loci in the genome was demonstrated, offering the potential of a new tool for gene cloning and mutagenesis. ISD1 is the first transposable element described for the sulfate reducers, a large and environmentally important group of bacteria. The distribution of ISD1 in genomes of sulfate-reducing bacteria is limited. A single copy is present in the genome of D. desulfuricans Norway.     

A Product of the Tn5 Transposase Gene Inhibits Transposition

The bacterial transposon Tn5 possesses a regulatory mechanism that allows it to move with higher efficiency when it is first introduced into a cell than after it is established. Tn5 is a composite transposable element containing inverted repeats of two nearly identical elements, IS 50R, which encodes the transposase protein necessary for Tn5 movement, and IS50L which contains an ochre mutant allele of the transposase gene. Data presented here show that Tn5 transposition is inhibited about 50-fold in cells of Escherichia coli which already carry IS 50R in the multicopy plasmid pBR322. If the cells contain a plasmid carrying either IS50L instead of IS50R, or derivatives of IS 50R in which the transposase gene has been mutated, little if any inhibition of Tn5 transposition is found. Although inhibition had previously been hypothesized to require interaction between the products of IS50 L and IS50R, our results show that IS50R alone is sufficient to mediate inhibition and suggest that the inhibitor is a product of the transposase gene itself.     

Isolation,characterization and transposition of an (IS2)2 intermediate

We have isolated and characterized a dimer derivative of the extensively studiedEscherichia coli insertion sequence IS2. The dimer structure — called (IS2)₂ — consists of two IS2 elements arranged as a direct repeat, separated by 1 bp. The junction between the (IS2)₂ dimer and target sequences is located at various positions in independent isolates; however, one position was preferred. The transposition of (IS2)₂ into a target plasmid resulted in cointegrate-type structures. The transposition frequency of the (IS2)₂ dimer itself was significantly higher than that of the isogenic monomer IS2 insertion. The poor stability and high activity of (IS2)₂ indicates that this is an active transposition intermediate. The mode of transposition of (IS2)₂ is analogous to the joined dimer model described in the case of (IS21)₂ and (IS30)₂.     

Conjugative Interaction Induces Transposition of ISPst9 in Pseudomonas stutzeri AN10

ISPst9 is an ISL3-like insertion sequence (IS) that was recently described in the naphthalene-degrading organism Pseudomonas stutzeri strain AN10. In this paper we describe a novel strong IS regulation stimulus; transposition of ISPst9 is induced in all P. stutzeri AN10 cells after conjugative interaction with Escherichia coli. Thus, we observed that in all P. stutzeri AN10 cells that received genetic material by conjugation the ISPst9 genomic dose and/or distribution was changed. Furthermore, ISPst9 transposition was also observed when P. stutzeri AN10 cells were put in contact with the plasmidless conjugative strain E. coli S17-1λ_pir, but not when they were put in contact with E. coli DH5α (a nonconjugative strain). The mechanism of ISPst9 transposition was analyzed, and transposition was shown to proceed by excision from the donor DNA using a conservative mechanism, which generated 3- to 10-bp deletions of the flanking DNA. Our results indicate that ISPst9 transposes, forming double-stranded DNA circular intermediates consisting of the IS and a 5-bp intervening DNA sequence probably derived from the ISPst9 flanking regions. The kinetics of IS circle formation are also described.     

IS1549 from Mycobacterium smegmatis Forms Long Direct Repeats upon Insertion

A new insertion element, IS1549, was identified serendipitously from Mycobacterium smegmatis LR222 during experiments using a vector designed to detect the excision of IS6110 from between the promoter region and open reading frame (ORF) of an aminoglycoside phosphotransferase gene. Six of the kanamycin-resistant isolates had a previously unidentified insertion element upstream of the ORF of the aph gene. The 1,634-bp sequence contained a single ORF of 504 amino acids with 85% G+C content in the third codon position. The putative protein sequence showed a distant relationship to the transposase of IS231, which is a member of the IS4 family of insertion elements. IS1549 contains 11-bp terminal inverted repeats and is characterized by the formation of unusually long and variable-length (71- to 246-bp) direct repeats of the target DNA during transposition. Southern blot analysis revealed that five copies of IS1549 are present in LR222, but not all M. smegmatis strains carry this element. Only strains with a 65-kDa antigen gene with a PCR-restriction fragment length polymorphism type identical to that of M. smegmatis 607 contain IS1549. None of 13 other species of Mycobacterium tested by PCR with two sets of primers specific for IS1549 were positive for the expected amplified product.     

Formation of the tandem repeat (IS30)2 and its role in IS30-mediated transpositional DNA rearrangements

Plasmids carrying two IS30 elements in the same orientation, as in the composite transposon Tn2706, are structurally unstable in Escherichia coli. A primary segregation product is formed by site-specific deletion of the sequences carried between the two IS30 elements. The resulting covalently closed replicon carries the two IS30 elements as tandem repeats separated by only 2 bp. This (IS30)₂ structure is extremely unstable, but it can nevertheless be isolated on its vector plasmid and, after purification, can be reintroduced into host cells by transformation. Among the descendants of transformants of recA ^? bacteria, replicated copies of the introduced (IS30)₂ structure are still present, together with various kinds of segregation products which provide evidence for the efficient generation of DNA rearrangements. Most abundant is the product of another site-specific recombination between two identical ends of the IS30 elements involved, which results in the presence of just one intact IS30 on the plasmid. Apart from this, and depending on the presence of appropriate targets for IS30 transposition, various transposition products of (IS30)₂ are also seen. Intramolecular reactions lead to DNA inversions and deletions with breakpoints other than IS30 ends. In intermolecular reactions inverse transposition occurs at high frequency and one also obtains simple transposition and cointegration. A mutational study revealed the requirement in cis of one intact IS30 transposase gene and of both proximal ends of the two IS30 elements concerned not only for the formation of (IS30)₂, but also for its further rearrangement reactions, including the efficient formation of site-specific deletions. A model is proposed, which postulates that (IS30)₂ intermediates play a key role in IS30 transposition pathways in which the formation of (IS30)₂ may be rate-limiting. Once this structure is formed, it gives rise to a burst of transpositional rearrangements in the subclone carrying (IS30)₂. Evolutionary implications of these findings are discussed.     

Distribution of Class 1 Integrons with IS26-Mediated Deletions in Their 3′-Conserved Segments in Escherichia coli of Human and Animal Origin

Class 1 integrons play a role in the emergence of multi-resistant bacteria by facilitating the recruitment of gene cassettes encoding antibiotic resistance genes. 512 E. coli strains sourced from humans (n = 202), animals (n = 304) and the environment (n = 6) were screened for the presence of the intI1 gene. In 31/79 integron positive E. coli strains, the gene cassette regions could not be PCR amplified using standard primers. DNA sequence analysis of 6 serologically diverse strains revealed atypical integrons harboured the dfrA5 cassette gene and only 24 bp of the integron 3′-conserved segment (CS) remained, due to the insertion of IS26. PCR targeting intI1 and IS26 followed by restriction fragment length polymorphism (RFLP) analysis identified the integron-dfrA5-IS26 element in 27 E. coli strains of bovine origin and 4 strains of human origin. Southern hybridization and transformation studies revealed the integron-dfrA5-IS26 gene arrangement was either chromosomally located or plasmid borne. Plasmid location in 4/9 E. coli strains and PCR linkage of Tn21 transposition genes with the intI1 gene in 20/31 strains, suggests this element is readily disseminated by horizontal transfer.     

IS<Emphasis Type="Italic">Ppy1</Emphasis>, a novel mobile element of the ancient <Emphasis Type="Italic">Psychrobacter maritimus</Emphasis> permafrost strain: Translocations in <Emphasis Type="Italic">Escherichia coli</Emphasis> K-12 cells and formation of composite transposons

It was shown that IS element ISPpy1 isolated earlier in the permafrost strain Psychrobacter maritimus MR29-12 has a high level of functional activity in cells of the heterologous host Escherichia coli K-12. ISPpy1 can be translocated in E. coli cells by itself and mobilize adjacent genes and can also form composite transposons flanked by two copies of this element. Apart from translocations between different plasmids, the composite ISPpy1-containing transposon Tn5080a is capable of translocation from the plasmid into the E. coli chromosome with high frequency and from the chromosome into the plasmid. Among products of Tn5080a transposition into plasmid R388, simple insertions were predominantly formed together with cointegrates. Upon mobilization of adjacent genes with the use of one ISPpy1 copy, only cointegrates arise.     

Isolation and Characterization of IS1416fromPseudomonas glumae,a New Member of the IS3Family

Isolation and characterization of four different insertion sequence (IS) elements fromPseudomonas glumaeMAFF 302744 through transposition into the entrapment vector pSHI1063 are described. One of the elements, IS1416,was further characterized. IS1416is 1322 bp long and carries 29-bp terminal inverted repeats flanked by a 3-bp direct duplication. IS1416contains three open reading frames (ORFs), which are designated ORFA1, ORFA2, and ORFB, on one strand. Both DNA sequence of IS1416and the deduced amino acid sequences of its ORFs strongly suggest that IS1416is a member of the IS3family, and is closely related to IS401fromPseudomonas cepaciaand IS51fromPseudomonas syringae.To our knowledge, IS1416is the first IS element isolated fromP. glumae.The gene organization and possible regulation of transposition functions of IS1416are also discussed.     

Two Amino Acid Residues of Transposase Contributing to Differential Transposability of IS1 Elements in Escherichia coli

Escherichia coli W3110 contains four types of IS1 elements in the chromosome. Using an insertion element entrapping system, we collected 116 IS1 plasmid insertion mutants, which resulted from a minimum of 26 independent IS1 insertion events. All of them had insertions of IS1 of the IS1A (IS1E and IS1G) type. Inspection of the transposase sequences of the four IS1 types and the IS1 of the resistance plasmid R100 showed that two amino acid residues, His-193 and Leu-217 of transposase, might contribute to differential transposability of IS1 elements in W3110. The two amino acid residues of the transposase in IS1A (IS1E and IS1G) were altered separately by site-directed mutagenesis, and each mutant was found to mediate transposition at a frequency about 30-fold lower than that of IS1A (IS1E and IS1G). Thus, the assumption that His-193 and Leu-217 of transposase contribute to differential transposability of IS1 elements in W3110 was confirmed.     

Evidence for a prokaryotic insertion-sequence contamination in eukaryotic sequences registered in different databases

An insertion-sequence of prokaryotic origin was detected in a genomic clone obtained from a Phaseolus vulgaris bacterial artificial chromosome (BAC) library. This BAC clone, characterized as part of a contig constructed near a virus resistance gene, exhibited restriction fragment length polymorphism with an overlapping clone of the contig. Restriction analysis of DNA obtained from individual colonies of the stock culture indicated the presence of a mixed population of wild-type and insertional mutants. Sequence analysis of both members of the population revealed the presence of IS10R, an insertion-sequence from Escherichia coli. A BLAST search for IS10-like sequences detected unexpected homologies with a large number of eukaryotic sequences from Homo sapiens, Arabidopsis thaliana, Drosophila melanogaster and Caenorhabditis elegans. Southern analysis of a random sample of BAC clones failed to detect IS10 in the BAC DNA. However, prolonged sub-culturing of a set of 15 clones resulted in transposition into the BAC DNA. Eventually, all cultures acquired a 2.3-kb fragment that hybridized strongly with IS10. Sequence analysis revealed the presence of a preferred site for transposition in the BAC vector. These results indicate that a large number, if not all, of the BAC libraries from different organisms are contaminated with IS10R. The source of this element has been identified as the DH10B strain of E. coli used as the host for BAC libraries. Received: 5 December 2000 / Accepted: 25 April 2001     

RecA-independent ectopic transposition in vivo of a bacterial group II intron

RmInt1 is a group II intron of Sinorhizobium meliloti which was initially found within the insertion sequence ISRm2011-2. Although the RmInt1 intron-encoded protein lacks a recognizable endonuclease domain, it is able to mediate insertion of RmInt1 at an intron-specific location in intronless ISRm2011-2 recipient DNA, a phenomenon termed homing. Here we have characterized three additional insertion sites of RmInt1 in the genome of S.meliloti. Two of these sites are within IS elements closely related to ISRm2011-2, which appear to form a characteristic group within the IS630-Tc1 family. The third site is in the oxi1 gene, which encodes a putative oxide reductase. The newly identified integration sites contain conserved intron-binding site (IBS1 and IBS2) and δ′ sequences (14 bp). The RNA of the intron-containing oxi1 gene is able to splice and the oxi1 site is a DNA target for RmInt1 transposition in vivo. Ectopic transposition of RmInt1 into the oxi1 gene occurs at 20-fold lower efficiency than into the homing site (ISRm2011-2) and is independent of the major RecA recombination pathway. The possibility that transposition of RmInt1 to the oxi1 site occurs by reverse splicing into DNA is discussed.     

Evidence that the insertion events of IS2 transposition are biased towards abrupt compositional shifts in target DNA and modulated by a diverse set of culture parameters

Insertion specificity of mobile genetic elements is a rather complex aspect of DNA transposition, which, despite much progress towards its elucidation, still remains incompletely understood. We report here the results of a meta-analysis of IS2 target sites from genomic, phage, and plasmid DNA and find that newly acquired IS2 elements are consistently inserted around abrupt DNA compositional shifts, particularly in the form of switch sites of GC skew. The results presented in this study not only corroborate our previous observations that both the insertion sequence (IS) minicircle junction and target region adopt intrinsically bent conformations in IS2, but most interestingly, extend this requirement to other families of IS elements. Using this information, we were able to pinpoint regions with high propensity for transposition and to predict and detect, de novo, a novel IS2 insertion event in the 3′ region of the gfp gene of a reporter plasmid. We also found that during amplification of this plasmid, process parameters such as scale, culture growth phase, and medium composition exacerbate IS2 transposition, leading to contamination levels with potentially detrimental clinical effects. Overall, our findings provide new insights into the role of target DNA structure in the mechanism of transposition of IS elements and extend our understanding of how culture conditions are a relevant factor in the induction of genetic instability.     

Insertion specificity and trans-activation of IS801

The transposable element IS801, isolated from plasmid pMMC7105 of Pseudomonas syringae pv. phaseolicola, transposes in Escherichia coli to plasmid targets, expressing a relatively relaxed target specificity. The target sequences are tetramers with homology with the left terminus (GAAC) of the transposing unit, the alternative targets being GAAC, GGAC, CAAG, and CGAC. In the areas flanking IS801 in 13 different locations, no similarities other than the target tetramer were observed. The transposase is physically and functionally separable from the transposing unit since transposition of constructs carrying marker genes occurs with the transposase expressed in trans. The IS801 transposase shows amino acid sequence homology to the transposases of the E. coli elements IS91 and IS1294. These tranposases contain conserved amino acid motifs found in the replicases of certain plasmids that replicate as rolling circles.     

Reactivation of Insertionally Inactivated Shiga Toxin 2 Genes of Escherichia coli O157:H7 Caused by Nonreplicative Transposition of the Insertion Sequence

IS1203v is an insertion sequence which has been found in inactivated Shiga toxin 2 genes of Escherichia coli O157:H7. We analyzed the transpositional mechanism of IS1203v in order to investigate whether the Shiga toxin 2 genes inactivated by IS1203v could revert to the wild type. When the transposase activity of IS1203v was enhanced by artificial frameshifting, IS1203v was obviously excised from the Shiga toxin 2 gene in a circular form. The IS1203v circle consisted of the entire IS1203v, but an extra 3-bp sequence (ATC) intervened between the 5′ and 3′ ends of IS1203v. The extra 3-bp sequence was identical to a direct repeat which was probably generated upon insertion. Moreover, we detected the Shiga toxin 2 gene with a precise excision of IS1203v. In the wild-type situation, the transposition products of IS1203v could be observed by PCR amplification. These results show that IS1203v can transpose in a nonreplicative manner and that the Shiga toxin gene inactivated by this insertion sequence can revert to the wild type.     

Evidence that Tn5565, which includes the enterotoxin gene in Clostridium perfringens, can have a circular form which may be a transposition intermediate

The Clostridium perfringens enterotoxin gene is on a transposon-like element, Tn5565, integrated in the chromosome in human food poisoning strains. The flanking IS elements, IS1470 A and B, are related to IS30. The IS element found in the transposon, IS1469, is related to IS200 and has been found upstream of cpe in all Type A strains. PCR and sequencing studies from cell extracts and plasmid isolations of C. perfringens indicate that Tn5565 can form a circular form with the tandem repeat (IS1470)₂, similar to the transposition intermediates described for a number of IS elements.     

High-Temperature-Induced Transposition of Insertion Elements in Burkholderia multivorans ATCC 17616

An efficient and quantitative method to analyze the transposition of various insertion sequence (IS) elements in Burkholderia multivorans ATCC 17616 was devised. pGEN500, a plasmid carrying a Bacillus subtilis-derived sacB gene, was introduced into ATCC 17616 cells, and 25% of their sucrose-resistant derivatives were found to carry various IS elements on pGEN500. A PCR-based experimental protocol, in which a mixture of several specific primer pairs was used, revealed that pGEN500 captured, in addition to five previously reported IS elements (IS401, IS402, IS406, IS407, and IS408), three novel IS elements, ISBmu1, ISBmu2, and ISBmu3. The global transposition frequency of these IS elements was enhanced more than sevenfold under a high-temperature condition (42°C) but not under oxidative stress or starvation conditions. To our knowledge, this is the first report demonstrating the elevated transposition activities of several IS elements at a high temperature. The efficient experimental protocol developed in this study will be useful in quantitatively and simultaneously investigating various IS elements, as well as in capturing novel functional mobile elements from a wide variety of bacteria.     

A New Large-DNA-Fragment Delivery System Based on Integrase Activity from an Integrative and Conjugative Element

During the past few decades, numerous plasmid vectors have been developed for cloning, gene expression analysis, and genetic engineering. Cloning procedures typically rely on PCR amplification, DNA fragment restriction digestion, recovery, and ligation, but increasingly, procedures are being developed to assemble large synthetic DNAs. In this study, we developed a new gene delivery system using the integrase activity of an integrative and conjugative element (ICE). The advantage of the integrase-based delivery is that it can stably introduce a large DNA fragment (at least 75 kb) into one or more specific sites (the gene for glycine-accepting tRNA) on a target chromosome. Integrase recombination activity in Escherichia coli is kept low by using a synthetic hybrid promoter, which, however, is unleashed in the final target host, forcing the integration of the construct. Upon integration, the system is again silenced. Two variants with different genetic features were produced, one in the form of a cloning vector in E. coli and the other as a mini-transposable element by which large DNA constructs assembled in E. coli can be tagged with the integrase gene. We confirmed that the system could successfully introduce cosmid and bacterial artificial chromosome (BAC) DNAs from E. coli into the chromosome of Pseudomonas putida in a site-specific manner. The integrase delivery system works in concert with existing vector systems and could thus be a powerful tool for synthetic constructions of new metabolic pathways in a variety of host bacteria.     

Red-Mediated Transposition and Final Release of the Mini-F Vector of a Cloned Infectious Herpesvirus Genome

Bacterial artificial chromosomes (BACs) are well-established cloning vehicles for functional genomics and for constructing targeting vectors and infectious viral DNA clones. Red-recombination-based mutagenesis techniques have enabled the manipulation of BACs in Escherichia coli without any remaining operational sequences. Here, we describe that the F-factor-derived vector sequences can be inserted into a novel position and seamlessly removed from the present location of the BAC-cloned DNA via synchronous Red-recombination in E. coli in an en passant mutagenesis-based procedure. Using this technique, the mini-F elements of a cloned infectious varicella zoster virus (VZV) genome were specifically transposed into novel positions distributed over the viral DNA to generate six different BAC variants. In comparison to the other constructs, a BAC variant with mini-F sequences directly inserted into the junction of the genomic termini resulted in highly efficient viral DNA replication-mediated spontaneous vector excision upon virus reconstitution in transfected VZV-permissive eukaryotic cells. Moreover, the derived vector-free recombinant progeny exhibited virtually indistinguishable genome properties and replication kinetics to the wild-type virus. Thus, a sequence-independent, efficient, and easy-to-apply mini-F vector transposition procedure eliminates the last hurdle to perform virtually any kind of imaginable targeted BAC modifications in E. coli. The herpesviral terminal genomic junction was identified as an optimal mini-F vector integration site for the construction of an infectious BAC, which allows the rapid generation of mutant virus without any unwanted secondary genome alterations. The novel mini-F transposition technique can be a valuable tool to optimize, repair or restructure other established BACs as well and may facilitate the development of gene therapy or vaccine vectors.     

IS4 is still found at its chromosomal site after transposition to galT

Summary IS4-DNA has been hybridized to separated DNA fragments of E. coli K12 strain M28 and to three mutants caused by transposition of IS4 to galT. The parental strain shows one band hybridizing to IS4 representing one copy of IS4 in the chromosome. The mutants have this copy retained and show in addition a second band corresponding to the IS4 copy in galT. The experiments support the hypothesis that transposition of IS4 is accompanied by replication of the element.