Synthesis and characterization of 2,3-di-O-alkylated amyloses: hydrophobic substitution destabilizes helical conformation

Amylose was selectively alkylated in the 2,3-O position of each anhydroglucose unit after trityl protection of the 6-OH groups. Alkyl iodides of varying chain length (C(2), C(5), C(8)) were coupled to amylose, and degrees of substitution (DSs) were varied between 0.3 and 1.8, as assessed by NMR analysis. Increasing amounts of methyl groups per anhydroglucose unit increased solubility in nonaqueous media, while at the same time reducing the ability of modified amylose to form a complex with iodine. The tendency to form inclusion complexes with the surfactant N-dodecyl pyridinium bromide decreased in the order beta-cyclodextrin > amylose approximately solubilized starch, indicating that the frozen macrocycle of beta-cyclodextrin was the most efficient inclusion host. Introduction of the bulky trityl group abolished the helical amylose conformation, which is not readily reassumed in the presence of hydrophobic substitution of the C2 and C3 positions. These results indicated that a polar outer surface is necessary but not sufficient for the formation of a stable amylose helix.     

Heterogeneous ethoxylation of cellulose: influence of alkali and available-water concentrations on substituent distributions

O-(2-Hydroxyethyl)cellulose (1) as formed by the alkali-catalyzed addition of ethylene oxide to cellulose flock in a slurry process is not uniformly substituted. Most of the ethylene oxide adds to HO-6 in a chain-fashion, so that ～20% of the d-glucose residues remain totally unsubstituted at 2.0 molar substitution. Consequently, an aqueous solution thickened by 1 is highly susceptible to enzymic degradation. Stepwise decrease in concentration of alkali during etherification gives improved stability to enzymic degradation associated with a more-uniform distribution of hydroxyethyl groups between the three hydroxyl groups of the glucose residues in cellulose. The relative reactivities of hydroxyl groups and patterns of substitution were established by matching the distribution patterns from a stochastic computer-model with the distribution of substituents as determined by chemical analyses [namely hydrolysis with sulfuric acid to determine the percentage of unsubstituted glucose residues (u-2) and with periodate oxidation for determining the percentage of unsubstituted 2,3-vicinal diol groups per residue]. The reactivities of the three hydroxyl groups at various alkali concentrations in a heterogeneous, slurry-addition process approximate those observed under homogeneous conditions, wherein the reactivities have been determined by tedious chromatographic analyses. In the variable-alkali procedure for addition of ethylene oxide, the amount of water available to the cellulose matrix in the low-alkali (m) sequence is important both for the stability to enzymic degradation and for obtaining gel-free, thickened, aqueous solutions. Optimal stabilities and gel-free solutions are observed at intermediate water: cellulose ratios of 1.10–1.23. At a ratio of 1.23, the stability to enzymic degradation is less sensitive to percentage variations of u-2 than in 1 prepared at higher or lower water: cellulose ratios. Although the initial degree of degradation between 1 of high molar substitution prepared at 6.8m alkali concentration and a similar product prepared under variable alkali conditions may be related to percentage differences of u-2, the rate and final degree of degradation do not relate to percentage differences of u-2. An adequate interpretation, utilizing known cellulase turnover-rates, is found in stochastic-model projections of the distribution of consecutive 2 residues not substituted at HO-2. The results indicate that (1) more-uniform substitution through equalization of hydroxyl reactivities is achieved by lowering the alkali concentration, and (2) more-uniform substitution of 2 of the many cellulose-chains being substituted is achieved by employing an optimal amount of “available” water during etherification.     

Chiral discrimination with regioselectively substituted cellulose esters as chiral stationary phases

Four kinds of cellulose derivatives, including two regioselectively substituted cellulose esters (6-O-acetyl-2,3-di-O-benzoyl cellulose and 2,3-di-O-acetyl-6-O-benzoyl cellulose), were synthesized so that the effects of their functional group distribution on their chiral discrimination ability could be examined. The degree of substitution by functional groups appeared to have a critical effect on the separation in most cases, but the type of the functional group at the C-6 position also significantly influenced chiral discrimination when a series of neutral arylalcohol derivatives were used as racemates. Copyright 2000 Wiley-Liss, Inc.     

Transformation of Azo Dye Isomers by Streptomyces chromofuscus A11

Fourteen mono-azo dyes were used to study the effects of substitution patterns on the biodegradability of dimethyl-hydroxy-azobenzene 4(prm1)-sulfonic acids by Streptomyces chromofuscus A11. Two substitution patterns were analyzed: (i) all possible substitution patterns of the two methyl and hydroxy substitution groups, 2-hydroxy (3,5; 4,5; 5,6) dimethyl and 4-hydroxy (2,3; 2,5; 2,6; 3,5) dimethyl isomers of azobenzene 4(prm1)-sulfonic acid; and (ii) replacement of the sulfonic group with a carboxylic group in these sulfonated azo dyes. The structural pattern of the hydroxy group in para position relative to the azo linkage and of two methyl substitution groups in ortho position relative to the hydroxy group was the most susceptible to degradation. Replacement of the sulfonic group with a carboxylic group enhanced overall dye degradability by S. chromofuscus A11.     

Mechanisms of wood degradation by brown-rot fungi: chelator-mediated cellulose degradation and binding of iron by cellulose

Iron, hydrogen peroxide, biochelators and oxalate are believed to play important roles in cellulose degradation by brown-rot fungi. The effect of these compounds in an 'enhanced' Fenton system on alpha-cellulose degradation was investigated specifically in regard to molecular weight distribution and cellulose-iron affinity. This study shows that the degradative ability of an ultrafiltered low molecular weight preparation of chelating compounds isolated from the brown-rot fungus Gloeophyllum trabeum (termed 'Gt chelator') increased with increasing Gt chelator concentration when the FeIII to Gt chelator ratio was greater than about 30:1. When this ratio was less than 30:1, increasing Gt chelator concentration did not accelerate cellulose degradation. In excess hydrogen peroxide, cellulose degradation increased and then decreased with increasing iron concentration when FeIII was present in excess of the Gt chelator. The critical ratio of FeIII to Gt chelator varied depending on the concentration of hydrogen peroxide in the system. Increasing iron concentration above a critical iron:chelator ratio inhibited cellulose degradation. The optimum pH for cellulose degradation mediated by Gt chelator was around 4.0. A comparison of the effects of 2,3-DHBA (a chelator that reduces iron similarly to Gt chelator) and Gt chelator with respect to cellulose degradation demonstrated the same pattern of cellulose degradation. Cellulose-iron affinity studies were conducted at three pH levels (3.6, 3.8, 4.1), and the binding constants for cellulose-FeIII, cellulose-FeII and cellulose-FeIII in the presence of Gt chelator were calculated. The binding constants for cellulose-FeIII at all three pH levels were much higher than those for cellulose-FeII, and the binding constants for cellulose-FeIII in the presence of Gt chelator were very close to those for cellulose-FeII. This is probably the result of FeIII reduction to FeII by Gt chelator and suggests that chelators from the fungus may be able to sequester iron from cellulose and reduce it in near proximity to the cellulose and thereby better promote depolymerization. The free radical generating system described has potential for use in a variety of industrial processing and pollution control applications.     

Synthesis and properties of anionic cellulose ethers: influence of functional groups and molecular weight on flowability of concrete

The suitability of anionic cellulose ethers as superplasticizers and the effect of chemical structure on the fluidity of cement mixtures was investigated. To elucidate the influence of molecular weight and degree of cellulose backbone substitution, cellulose and hydroxyethyl cellulose with molecular weights <50,000 g/mol were synthesized by acid-catalyzed and oxidative degradation. Commercial as well as degraded samples were functionalized by carboxymethylation and sulfobutylation, controlling the degree of substitution (DS) by the molar ratio of reactants and by taking advantage of the high reactivity of sultones towards salts of carboxylic acids, even in aqueous solutions. The fluidizing effect of the cellulose ethers with anionic ‘cement-anchoring‘ groups was prescreened, measuring the static flow of cement pastes. The results indicated a high potential of sulfobutylated cellulose mixed ethers as dispersing agents for concrete. The fluidizing action increased with increasing DS and an optimum range of molecular weight between 100,000 and 150,000 g/mol was found.     

Enzymatic degradation of hydroxypropyltrimethylammonium wheat starches

The enzymatic degradation of hydroxypropyltrimethylammonium modified starches synthesised by dry process was compared with that of hydroxypropyltrimethylammonium modified starches synthesised in glycerol–water plasticised molten medium. The enzymatic degradation rate of products from both origins decreased as the degree of substitution increased. However, two distinct enzymatic degradation profiles were obtained. Dry process products displayed a regular decrease pattern as DS increased. Molten medium synthesised cationic starches displayed a constant degradation level on a wide DS range with ,β-amylase and amyloglucosidase, whereas isoamylase degradation rapidly reached its degradation limit at DSs 0.05. The various plasticising conditions used to synthesise cationic starch in molten medium show no influence on the enzymatic degradation.

By measuring the affinity of -amylase, β-amylase and isoamylase for native, extruded non-modified and hydroxypropyltrimethylammonium-modified starches. It was evident that the enzymes’ affinity for the substrate diminishes with increasing chemical modification, particularly in the case of -amylase, suggesting that the location of cationic groups impairs the enzyme’s recognition of the substrate. Structural elements of limit dextrins were analysed by ¹H NMR.     

Influence of chroline substitution pattern on the degradation of polychlorinated biphenyls by eight bacterial strains

We compared the metabolism of eight di- and trichlorobiphenyls by eight bacterial strains chosen to represent a broad range of degradative activity against polychlorinated biphenyls (PCBs). The PCB congeners used were 2,3-, 2,3′-, 2,4′-, 3,3′-, 2,3,3′-, 2,4,4′-, 2,5,3′-, and 3,4,2′-chlorobiphenyl. The bacterial strains used wereCorynebacterium sp. MB1,Alcaligenes strainsA. eutrophus H850 andA. faecalis Pi434, andPseudomonas strains LB400 and H1130,P. testosteroni H430 and H336, andP. cepacia H201. The results indicated that both the relative rates of primary degradation of PCBs and the choice of the ring attacked were dependent on the bacterial strain used. The bacterial strains exhibited considerable differences in their relative reactivity preferences for attack on mono- and dichlorophenyl groups and in the degree to which the attack was affected by the chlorine substitution pattern on the nonreacting ring. For MB1 the reactivity pattern was 3-≥4-≫2-chlorophenyl with no attack on 2,4- or 2,5-chlorophenyl groups. This strain was relatively insensitive to the chlorine substitution pattern on the nonreacting ring. Strains H1130, H430, H201, and Pi434 exhibited the same reactivity preferences as MB1, but for these strains (and for all others tested) the chlorination pattern on the nonreacting ring had a strong effect. For strain H336 the reactivity preference was 4-≥2->2,4-≥3-chlorophenyl, with no evidence of attack on 2,5-chlorophenyl rings. For strains H850 and LB400 the relative reactivity was 2->2,5->3-≫2,4->4-chlorophenyl. On this basis we propose that the eight bacterial strains represent four distinct classes of biphenyl/PCB-dioxygenase activity. The types of products formed were largely strain-independent and were determined primarily by the chlorine substitution pattern on the reacting ring. When the reacting ring was an unsubstituted phenyl or a 2-chlorophenyl group, the products were chlorobenzoic acids in high yields; for a 3-chlorophenyl ring, both chlorobenzoic acids and chloroacetophenones in moderate yields; and for a 4- or 2,4-chlorophenyl group, chlorobenzoic acids in low yields with an apparent accumulation ofmeta ring-fission product. Strains H850 and LB400 were able to degrade the 3-chlorobenzoic acid that they produced from the degradation of 2,3′-chlorobiphenyl. We conclude that despite differences among strains in the specificity of the initial dioxygenase, the specificities of the enzymes responsible for the subsequent degradation to chlorobenzoic acid and/or chloroacetophenone are quite similar for all strains.     

Bacterial metabolism of hydroxylated biphenyls.

Isolates able to grow on 3- or 4-hydroxybiphenyl (HB) as the sole carbon source were obtained by enrichment culture. The 3-HB degrader Pseudomonas sp. strain FH12 used an NADPH-dependent monooxygenase restricted to 3- and 3,3'-HBs to introduce an ortho-hydroxyl. The 4-HB degrader Pseudomonas sp. strain FH23 used either a mono- or dioxygenase to generate a 2,3-diphenolic substitution pattern which allowed meta-fission of the aromatic ring. By using 3-chlorocatechol to inhibit catechol dioxygenase activity, it was found that 2- and 3-HBs were converted by FH23 to 2,3-HB, whereas biphenyl and 4-HB were attacked by dioxygenation. 4-HB was metabolized to 2,3,4'-trihydroxybiphenyl. Neither organism attacked chlorinated HBs. The degradation of 3- and 4-HBs by these strains is therefore analogous to the metabolism of biphenyl, 2-HB, and naphthalene in the requirement for 2,3-catechol formation.     

Bacterial metabolism of hydroxylated biphenyls

Isolates able to grow on 3- or 4-hydroxybiphenyl (HB) as the sole carbon source were obtained by enrichment culture. The 3-HB degrader Pseudomonas sp. strain FH12 used an NADPH-dependent monooxygenase restricted to 3- and 3,3'-HBs to introduce an ortho-hydroxyl. The 4-HB degrader Pseudomonas sp. strain FH23 used either a mono- or dioxygenase to generate a 2,3-diphenolic substitution pattern which allowed meta-fission of the aromatic ring. By using 3-chlorocatechol to inhibit catechol dioxygenase activity, it was found that 2- and 3-HBs were converted by FH23 to 2,3-HB, whereas biphenyl and 4-HB were attacked by dioxygenation. 4-HB was metabolized to 2,3,4'-trihydroxybiphenyl. Neither organism attacked chlorinated HBs. The degradation of 3- and 4-HBs by these strains is therefore analogous to the metabolism of biphenyl, 2-HB, and naphthalene in the requirement for 2,3-catechol formation.     

Detoxification of organophosphate pesticides using an immobilized phosphotriesterase from Pseudomonas diminuta

A purified phosphotriesterase was successfully immobilized onto trityl agarose in a fixed bed reactor. A total of up to 9200 units of enzyme activity was immobilized onto 2.0 mL of trityl agarose (65 mumol trityl groups/mL agarose), where one unit is the amount of enzyme required to catalyze the hydrolysis of one micromole of paraoxon in one min. The immobilized enzyme was shown to behave chemically and kinetically similar to the free enzyme when paraoxon was utilized as a substrate. Several organophosphate pesticides, methyl parathion, ethyl parathion, diazinon, and coumaphos were also hydrolyzed by the immobilized phosphotriesterase. However, all substrates exhibited an affinity for the trityl agarose matrix. For increased solubility and reduction in the affinity of these pesticides for the trityl agarose matrix, methanol/water mixtures were utilized. The effect of methanol was not deleterious when concentrations of less than 20% were present. However, higher concentrations resulted in elution of enzyme from the reactor. With a 10-unit reactor, a 1.0 mM paraoxon solution was hydrolyzed completely at a flow rate of 45 mL/h. Kinetic parameters were measured with a 0.1-unit reactor with paraoxon as a substrate at a flow rate of 22 mL/h. The apparent K(m) for the immobilized enzyme was 3-4 times greater than the K(m) (0.1 mM) for the soluble enzyme. Immobilization limited the maximum rate of substrate hydrolysis to 40% of the value observed for the soluble enzyme. The pH-rate profiles of the soluble and immobilized enzymes were very similar. The immobilization of phosphotriesterase onto trityl agarose provides an effective method esterase onto trityl agarose provides an effective method for hydrolyzing and thus detoxifyuing organophosphate pesticides and mammalian acetylcholinesterase inhinbitors.     

Debenzylation and detritylation by bromodimethylborane: synthesis of mono-acid or mixed-acid 1,2- or 2,3-diacyl-sn-glycerols.

A novel method of deprotecting primary alcohols protected with either benzyl or trityl groups by using bromodimethylborane under mild reaction conditions (dichloromethane, -20 to 5 degrees C) has been applied to the synthesis of optically pure mono-acid or mixed-acid 1,2- or 2,3-diacyl-sn-glycerols. This method was particularly useful for the synthesis of long saturated acyl (C12 to C24) as well as unsaturated diacyl-sn-glycerols since little or no acyl migration occurred during deprotection. Diacylation of 3-benzyl-sn-glycerol or 1-benzyl-sn-glycerol followed by bromodimethylborane debenzylation gave mono-acid 1,2- or 2,3-diacyl-sn-glycerols, respectively. The mixed-acid 1,2- or 2,3-diacyl-sn-glycerols were prepared from 1-acyl-sn-glycerols or 3-acyl-sn-glycerols, respectively, by tritylation, acylation with a different fatty acid, followed by detritylation with bromodimethylborane.     

Influence of particle size and pH on anaerobic degradation of cellulose by ruminal microbes

Batch experiments were performed to investigate the influence of cellulose particle size and pH on the anaerobic degradation of crystalline cellulose by ruminal microbes. At a particle size of 50 μm there was a higher hydrolysis and acidogenesis rate, and a reduced degradation time, than for 100-μm particles. Reduction in cellulose particle size resulted in decreased methane production, but an increase of soluble products. Cellulose degradation increased with pH from pH 6.0 to 7.5, whereas at pH⩽5.5 there was no degradation. The inhibitory effect of low pH (⩽5.5) on ruminal microbes was not completely remedied even when the pH of the medium was adjusted to a neutral range. In an anaerobic cellulosic waste degrading system inoculated with ruminal microbes the fermentation system should therefore be maintained above pH 6.0. In all cases, volatile fatty acids were the major water-soluble products of cellulose degradation; acetate and propionate accounted for more than 90% of the volatile fatty acid total.     

Inability of Microorganisms To Degrade Cellulose Acetate Reverse-Osmosis Membranes

Operational cellulose acetate reverse-osmosis membranes were examined for evidence of biological degradation. Numerous fungi and bacteria were isolated by direct and enrichment techniques. When tested, most of the fungi were active cellulose degraders, but none of the bacteria were. Neither fungi nor bacteria were able to degrade cellulose acetate membrane in vitro, although many fungi were able to degrade cellulose acetate membrane after it had been deacetylated. Organisms did not significantly degrade powdered cellulose acetate in pure or mixed cultures as measured by reduction in acetyl content or intrinsic viscosity or production of reducing sugars. Organisms did not affect the performance of cellulose triacetate fibers when incubated with them. The inability of the organisms to degrade cellulose acetate was attributed to the high degree of acetate substitution of the cellulose polymer. The rate of salt rejection decline was strongly correlated with chlorination of feed water and inversely with densities of microorganisms. These data suggest that microbial degradation of operational cellulose acetate reverse-osmosis membranes is unlikely.     

Hydrogen bond formation in regioselectively functionalized 3-mono-O-methyl cellulose

The hydrogen bond systems of cellulose and its derivatives are one of the most important factors regarding their physical- and chemical properties such as solubility, crystallinity, gel formation, and resistance to enzymatic degradation. In this paper, it was attempted to clarify the intra- and intermolecular hydrogen bond formation in regioselectively functionalized 3-mono-O-methyl cellulose (3MC). First, the 3MC was synthesized and the cast film thereof was characterized in comparison to 2,3-di-O-methyl cellulose, 6-mono-O-methyl cellulose, and 2,3,6-tri-O-methyl cellulose by means of wide angle X-ray diffraction (WAXD) and (13)C cross polarization/magic angle spinning NMR spectroscopy. Second, the hydrogen bonds in the 3MC film were analyzed by means of FTIR spectroscopy in combination with a curve fitting method. After deconvolution, the resulting two main bands (Fig. 3) indicated that instead of intramolecular hydrogen bonds between position OH-3 and O-5 another intramolecular hydrogen bond between OH-2 and OH-6 may exist. The large deconvoluted band at 3340cm(-1) referred to strong interchain hydrogen bonds involving the hydroxyl groups at C-6. The crystallinity of 54% calculated from the WAXD supports also the dependency of the usually observed crystallization in cellulose of the hydroxyl groups at C-6 to engage in interchain hydrogen bonding.     

Homogeneous phase synthesis of cellulose carbamate silica hybrid materials using 1-n-butyl-3-methylimidazolium chloride ionic liquid medium

Cellulose carbamate silica hybrid materials can be prepared in 78–84% yield using the homogeneous phase reaction of 3-(triethoxysilyl)propyl isocyanate with cellulose dissolved in 1-n-butyl-3-methylimidazolium chloride ionic liquid and then using NH₄OH catalyzed hydrolysis of triethoxysilyl groups and the sol–gel process. New cellulose carbamate silica hybrid materials produced were characterized by elemental analysis, FT-IR, and TG-DTA. The hydrophilic affinity of these materials is shown to decrease with the degree of substitution of the cellulose hydroxyl groups with carbamate groups.     

Characterization of chemical substitution of hydroxypropyl cellulose using enzymatic degradation

The distribution of substituents along the polymer backbone will have a strong influence on the properties of modified cellulose. Endoglucanases were used to degrade a series of hydroxypropyl cellulose (HPC) derivatives with a high degree of substitution. The HPCs were characterized with cloud-point analysis prior to degradation. The extent of enzymatic degradation was determined with size-exclusion chromatography with online multi-angle light scattering and refractive index detection and also with high-pH anion exchange chromatography with pulsed amperometric detection. To further characterize the formed products, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was employed for analysis of short-chained oligosaccharides. The different endoglucanases showed varying degradation capability depending on structure of the active site. The highly substituted HPCs had different susceptibility to degradation by the endoglucanases. The results show a difference in substituent distribution between HPCs, which would explain the differing cloud-point behaviors. Increased number of regions with low substitution could be correlated with lower polymer cloud point. The study shows the usefulness of enzymatic degradation to study the distribution of substituents in soluble biopolymer derivates.     

Cellulose-degrading potentials and phylogenetic classification of carboxymethyl-cellulose decomposing bacteria isolated from soil

In a previous study, culturable carboxymethyl-cellulose (CMC) decomposing soil bacteria isolated from different sampling positions across an agricultural encatchment have been classified into 31 pattern groups by digestion of amplified 16S rDNA using a single restriction enzyme (Ulrich and Wirth: Microb. Ecol. 37, 238-247, 1999). In order to reveal relationships between phylogenetic diversity and phenotypic functions, a further differentiation of two selected site-specific pattern groups (I and H) was performed, resulting in a sub-classification of four and three ARDRA groups, respectively. Based on sequencing a representative isolate of each ARDRA group, the isolates were assigned to the genus Streptomyces. The ARDRA groups were dispersed across various clades of the genus with a direct affiliation to species known for cellulolytic activity in one group, only. The isolates differed in potentials to degrade colloidal, native or highly crystalline cellulose derivatives. Out of 39 isolates, 11 were capable of degrading all substrates, 17 were restricted to degrade CMC only, and 11 were active decomposers of exclusively both CMC and colloidal cellulose. In most cases, the genetic classification of the isolates corresponded with groupings based on cellulose degrading capabilities. Thus, isolates of four ARDRA groups were restricted to the degradation of CMC, while two further isolates which efficiently degraded all cellulose derivatives formed two separate ARDRA groups. The major ARDRA group, however; displayed a high variability of degradation capabilities. The study of additional phenotypic features revealed a broad potential to decompose a set of various carbon substrates, which matched the phylogenetic classification in several cases.     

Effect of sulfate groups from sulfuric acid hydrolysis on the thermal degradation behavior of bacterial cellulose

When used as fillers in polymer composites, the thermostability of cellulose crystals is important. Sulfate groups, introduced during hydrolysis with sulfuric acid, are suspected to diminish the thermostability. To elucidate the relationship between the hydrolysis conditions, the number of sulfate groups introduced, and the thermal degradation behavior of cellulose crystals, bacterial cellulose was hydrolyzed with sulfuric acid under different hydrolysis conditions. The number of sulfate groups in the crystals was determined by potentiometric titration. The thermal degradation behavior was investigated by thermogravimetric analysis. The sulfate group content increased with acid concentration, acid-to-cellulose ratio, and hydrolysis time. Even at low levels, the sulfate groups caused a significant decrease in degradation temperatures and an increase in char fraction confirming that the sulfate groups act as flame retardants. Profile analysis of the derivative thermogravimetric curves indicated thermal separation of the degradation reactions by the sulfate groups into low- and high-temperature processes. The Broido method was used to determine activation energies for the degradation processes. The activation energies were lower at larger amounts of sulfate groups suggesting a catalytic effect on the degradation reactions. For high thermostability in the crystals, low acid concentrations, small acid-to-cellulose ratios, and short hydrolysis times should be used.     

Synthesis and characterization of highly substituted deoxyfluorocellulose acetate.

Deoxyfluorocellulose acetates were prepared from cellulose acetate (CA, degree of substitution by acetyl groups: 2.2 and 1.7) by using diethylaminosulfur trifluoride (DAST) in 1,4-dioxane or diglyme. The maximum degree of substitution of fluorine of the products was approximately 0.60, and depolymerization was not significant during fluorination. The replacement of hydroxyl groups by fluorine atoms occurred exclusively at C-6, as confirmed by carbon-13 NMR spectroscopy. In the presence of pyridine, an N-pyridinium derivative of CA was obtained instead of a deoxyfluoro derivative of cellulose.