Enhancement of TiO2 photocatalytic activity by structuring the photocatalyst film as photonic sponge

A TiO2 film having "photonic sponge" architecture (ps-TiO2) has been prepared using titania Degussa P25 nanoparticles that have been infiltrated into a template obtained through the arrangement of a mixture of different size latex spheres. The resulting photonic sponge exhibits 3.3 fold higher initial photocatalytic degradation rate for succinonitrile disappearance than analogous films of the same thickness made of unstructured P25 TiO2 nanoparticles. When corrected for the three fold lower mass of the ps-TiO2 films with respect to more dense P25, the enhancement of the photocatalytic activity by the photonic sponge morphology for the same mass of photocatalyst is about one order of magnitude. It was also observed that films of photonic sponge of 3 microm depth are more efficient than thicker films (5 and 7 microm).     

Hydroxyl radicals (*OH) are associated with titanium dioxide (TiO(2)) nanoparticle-induced cytotoxicity and oxidative DNA damage in fish cells

TiO(2) nanoparticles (< 100 nm diameter) have been reported to cause oxidative stress related effects, including inflammation, cytotoxicity and genomic instability, either alone or in the presence of UVA irradiation in mammalian studies. Despite the fact that the aquatic environment is often the ultimate recipient of all contaminants there is a paucity of data pertaining to the potential detrimental effects of nanoparticles on aquatic organisms. Therefore, these investigations aimed to evaluate the potential cytotoxic and genotoxic effects of TiO(2) nanoparticles on goldfish skin cells (GFSk-S1), either alone or in combination with UVA. Whilst neutral red retention (NRR) assay (a measure of lysosomal membrane integrity) was used to evaluate cell viability, a modified Comet assay using bacterial lesion-specific repair endonucleases (Endo-III, Fpg) was employed to specifically target oxidative DNA damage. Additionally, electron spin resonance (ESR) studies with different spin traps were carried out for qualitative analysis of free radical generation. For cell viability, TiO(2) alone (0.1-1000 microg ml(-1)) had little effect whereas co-exposure with UVA (0.5-2.0 kJm(-2)) caused a significant dose-dependent decrease which was dependent on both the concentration of TiO(2) and the dose of UVA administered. For the Comet assay, doses of 1, 10 and 100 microg ml(-1) in the absence of UVA caused elevated levels of Fpg-sensitive sites, indicating the oxidation of purine DNA bases (i.e. guanine) by TiO(2). UVA irradiation of TiO(2)-treated cells caused further increases in DNA damage. ESR studies revealed that the observed toxic effects of nanoparticulate TiO(2) were most likely due to hydroxyl radical (OH) formation.     

Influence of reduction processes on the colour and photochromism of amorphous mesoporous TiO(2) thin films loaded with a silver salt

Silver nanoparticles were created inside mesoporous titania thin films by different reduction processes. We investigated the influence of the reduction method on the colour and photochromism of these amorphous TiO(2) films. The results highlight brown films by optical reduction, gray films by thermal reduction, and red, purple or orange films by chemical reduction. The different size distributions and localizations of the nanoparticles, characterized by UV-visible spectroscopy and electron microscopy, give various photochromic behaviours when exposed to visible laser light. We especially report the bleaching of different film colours under laser exposure.     

Characterization of an FMN-containing cyclohexanone monooxygenase from a cyclohexane-grown Xanthobacter sp

A soluble cyclohexanone monooxygenase was purified 16.1-fold to homogeneity from a Xanthobacter sp. grown upon cyclohexane as sole source of carbon and energy. The native enzyme is a 50-kDa single polypeptide chain associated with FMN rather than FAD as flavin prosthetic group in a 1:1 stoichiometric relationship. The monooxygenase catalyses the transformation of cyclohexanone to the lactone 1-oxa-2-oxocycloheptane in an oxygen ring insertion reaction. Only related cycloalkanone substrates are accepted for oxygenation, no activity is shown towards straight-chain alkanones. Enzyme activity is strongly inhibited by sulphydryl-reactive agents, but is relatively insensitive to metal chelators, electron transport inhibitors and the metal ions Fe3+ and Cu2+. Cyclohexanone monooxygenase has Km values for cyclohexanone and NADPH of less than 0.5 microM and 12.5 microM respectively. Kinetic investigations under steady-state conditions demonstrate that the flavoprotein prosthetic group, FMN, is involved in the monooxygenase catalytic mechanism. The systematic name for the enzyme is cyclohexanone, NADPH:oxygen oxidoreductase (6-hydroxylating, 1,2-lactonizing) (EC 1.14.13.22).     

TiO(2) nanocrystals electrochemiluminescence quenching by biological enlarged nanogold particles and its application for biosensing

Electrochemiluminescence (ECL) of TiO(2) nanocrystals with different crystal styles modified fluorine-doped tin oxide (FTO) electrode was investigated in H(2)O(2) solution. The amorphous TiO(2) nanospheres were facilely synthesized by the hydrothermal and condensation method. Crystal TiO(2), namely anatase and rutile, were prepared by calcination of the amorphous TiO(2) nanospheres at 450 and 800°C, respectively. The transmission electron microscope (TEM) and electron diffraction pattern were used to characterize the obtained TiO(2) nanoparticles morphology and the corresponding crystal styles. The electrochemical and ECL behaviors were investigated by cyclic voltammetry. The ECL quenching was observed by introduction of gold nanoparticles. Based on the quenching effect, a sensitive glucose ECL biosensor as a model was fabricated by in-situ growing-up gold seeds in AuCl(4)(-) solution induced by biologically generated H(2)O(2). The linear range to detect glucose is from 5.0×10(-7)M to 4.0×10(-3)M with the limit of detection of 2.5×10(-7)M.     

Additional effects of silver nanoparticles on bactericidal efficiency depend on calcination temperature and dip-coating speed

There is an increasing interest in the application of photocatalytic properties for disinfection of surfaces, air, and water. Titanium dioxide is widely used as a photocatalyst, and the addition of silver reportedly enhances its bactericidal action. However, the synergy of silver nanoparticles and TiO(2) is not well understood. The photocatalytic elimination of Bacillus atrophaeus was examined under different calcination temperatures, dip-coating speeds, and ratios of TiO(2), SiO(2), and Ag to identify optimal production conditions for the production of TiO(2)- and/or TiO(2)/Ag-coated glass for surface disinfection. Photocatalytic disinfection of pure TiO(2) or TiO(2) plus Ag nanoparticles was dependent primarily on the calcination temperature. The antibacterial activity of TiO(2) films was optimal with a high dip-coating speed and high calcination temperature (600°C). Maximal bacterial inactivation using TiO(2)/Ag-coated glass was also observed following high-speed dip coating but with a low calcination temperature (250°C). Scanning electron microscopy (SEM) showed that the Ag nanoparticles combined together at a high calcination temperature, leading to decreased antibacterial activity of TiO(2)/Ag films due to a smaller surface area of Ag nanoparticles. The presence of Ag enhanced the photocatalytic inactivation rate of TiO(2), producing a more pronounced effect with increasing levels of catalyst loading.     

Tuning the optical and photoelectrochemical properties of surface-modified TiO2.

Surface-modification of TiO(2) is found to be a powerful tool for manipulating the fundamental optical and photoelectrochemical properties of TiO(2). High surface area nanocrystalline TiO(2) was modified by urea pyrolysis products at different temperatures between 300 degrees C and 500 degrees C. Modification occurs through incorporation of nitrogen species containing carbon into the surface structure of titania. The N1s XPS binding energies are 399-400 eV and decrease with increasing modification temperature whereby the Ti2p(3/2) peak is also shifted to lower binding energies by about 0.5 eV. With increasing modification temperature the optical bandgap of surface-modified TiO(2) continuously decreases down to approximately 2.1 eV and the quasi-Fermi level of electrons at pH 7 is gradually shifted from -0.6 V to -0.3 V vs. NHE. The surface-modified materials show enhanced sub-bandgap absorption (Urbach tail) and exhibit photocurrents in the visible down to 750 nm. The maximum incident photon-to-current efficiency (IPCE) was observed for the materials modified at 350 degrees C and 400 degrees C (IPCE approximately 14% at 400 nm, and IPCE approximately 1% at 550 nm, respectively). The efficiency of photocurrent generation is limited by surface recombination, which leads to a significant decrease in IPCE values and significantly changes the shape of the IPCE spectra in dependence on the optical bandgap.     

Preparation of TiO2 anatase nanocrystals by TiCl4 hydrolysis with additive H2SO4

A new methodology was developed to synthesize uniform titania anatase nanocrystals by the hydrolysis of titanium chloride in sulfuric acid aqueous solutions at 0-90°C. The samples were characterized by Raman spectroscopy, UV-visible spectroscopy, transmission electron microscopy (TEM), electron diffraction (ED), and an Energy dispersive X-ray spectroscopy (EDS). The effects of the reaction temperature, mole ratio of SO(4)(2-) to Ti(4+), and the calcinations temperature on the particle size and crystal phase were investigated. Depending on the acidity, the hydrolysis temperature, and the calcination temperature, rhombic anatase nanocrystals sizes in the range of 10 nm to 50 nm were obtained. In the additive of sulfuric acid, Raman spectra and electron diffraction confirmed that the nanoparticles are composed of anatase TiO(2). No other titania phases, such as rutile or brookite, were detected.     

Formation of potential titanium antigens based on protein binding to titanium dioxide nanoparticles

Degradation products of titanium implants include free ions, organo-metallic complexes, and particles, ranging from nano to macro sizes. The biological effects, especially of nanoparticles, is yet unknown. The main objective of this study was to develop Ti-protein antigens in physiological solutions that can be used in testing of cellular responses. For this purpose, 0.1% TiO2 nanoparticles less than 100 nm were mixed with human serum albumin (HSA), 0.1% and 1%, in cell culture medium (DMEM, pH 7.2). The Ti concentrations in the resulting solutions were analyzed by inductively coupled plasma mass spectrometry. The stability of the nanoparticles in suspension was analyzed by UV-vis spectrophotometer and Dynamic Light Scattering. The concentration of Ti in suspension was dependent on the presence and concentration of HSA. Albumin prevented high aggregation rate of TiO2 nanoparticles in cell culture medium. It is shown that nano TiO2-protein stable aggregates can be produced under physiological conditions at high concentrations, and are candidates for use in cellular tests.     

可见光响应的CdTe/TiO2复合纳米颗粒体外PDT灭活HL60细胞的研究

文章采用溶胶凝胶法制备核壳CdTe/TiO_2复合纳米颗粒,探讨了该复合纳米颗粒体外PDT对HL60细胞的灭活作用。通过扫描电镜(TEM)、X射线光电子衍射仪(XPS)对CdTe/TiO_2进行表征。文中,用紫外可见光吸收光谱(UV-vis)测得尺寸为2-5 nm的CdTe QDs吸收峰为460 nm。研究表明,CdTe/TiO_2复合纳米颗粒尺寸在80 nm左右,其吸收光谱相较于TiO_2的光响应区拓展至可见光区。将CdTe/TiO_2与HL60细胞进行共同孵育,采用CCK-8法研究了其在暗室条件下细胞的生长情况和浓度对细胞相对存活率的影响以及在不同浓度的CdTe/TiO_2复合纳米颗粒PDT后的细胞活性。实验结果表明:在共同孵育16 h后CdTe/TiO_2对HL60细胞的毒性最强,10~320μg/mL浓度的CdTe/TiO_2样品对HL60细胞均具有较强的灭活作用。当添加CdTe/TiO_2样品浓度为320μg/mL时,光照1 h后PDT灭活效率达到87.7%。     

Protein structural deformation induced lifetime shortening of photosynthetic bacteria light-harvesting complex LH2 excited state

Photosynthetic bacterial light-harvesting antenna complex LH2 was immobilized on the surface of TiO(2) nanoparticles in the colloidal solution. The LH2/TiO(2) assembly was investigated by the time-resolved spectroscopic methods. The excited-state lifetimes for carotenoid-containing and carotenoidless LH2 have been measured, showing a decrease in the excited-state lifetime of B850 when LH2 was immobilized on TiO(2). The possibility that the decrease of the LH2 excited-state lifetime being caused by an interfacial electron transfer reaction between B850 and the TiO(2) nanoparticle was precluded experimentally. We proposed that the observed change in the photophysical properties of LH2 when assembled onto TiO(2) nanoparticles is arising from the interfacial-interaction-induced structural deformation of the LH2 complex deviating from an ellipse of less eccentric to a more eccentric ellipse, and the observed phenomenon can be accounted by an elliptical exciton model. Experiment by using photoinactive SiO(2) nanoparticle in place of TiO(2) and core complex LH1 instead of LH2 provide further evidence to the proposed mechanism.     

Genotoxicity of TiO(2) anatase nanoparticles in B6C3F1 male mice evaluated using Pig-a and flow cytometric micronucleus assays

In vivo micronucleus and Pig-a (phosphatidylinositol glycan, class A gene) mutation assays were conducted to evaluate the genotoxicity of 10 nm titanium dioxide anatase nanoparticles (TiO(2)-NPs) in mice. Groups of five 6-7-week-old male B6C3F1 mice were treated intravenously for three consecutive days with 0.5, 5.0, and 50 mg/kg TiO(2)-NPs for the two assays; mouse blood was sampled one day before the treatment and on Day 4, and Weeks 1, 2, 4, and 6 after the beginning of the treatment; Pig-a mutant frequencies were determined at Day -1 and Weeks 1, 2, 4 and 6, while percent micronucleated-reticulocyte (%MN-RET) frequencies were measured on Day 4 only. Additional animals were treated intravenously with three daily doses of 50 mg.kg TiO(2)-NPs for the measurement of titanium levels in bone marrow after 4, 24, and 48 h of the last treatment. The measurement indicated that the accumulation of the nanoparticles reached the peak in the tissue 4 h after the administration and the levels were maintained for a few days. No increase in either Pig-a mutant frequency of the frequency of %MN-RETs was detected, although the %RETs was reduced in the treated animals on Day 4 in a dose-dependent manner indicating cytotoxicity of TiO(2)-NPs in the bone marrow. These results suggest that although TiO(2)-NPs can reach the mouse bone marrow and are capable of inducing cytotoxicity, the nanoparticles are not genotoxic when assessed with in vivo micronucleus and Pig-a gene mutation tests.     

TiO2/MWNTs nanocomposites-based electrochemical strategy for label-free assay of casein kinase II activity and inhibition

In this paper, a novel label-free electrochemical strategy has been developed for assay of casein kinase II (CK2) activity and inhibition using TiO(2)/MWNTs nanocomposites. This detection system takes advantage of specific binding of the phosphate groups with TiO(2) nanoparticles and fast electron transfer rate of MWNTs. In this strategy, the synthesized TiO(2)/MWNTs nanocomposite was firstly deposited on the surface of a glassy carbon electrode (GCE). The presence of MWNTs not only increased the surface area of the electrode but also promoted electron-transfer reaction. In the presence of CK2, the kinase reaction resulted in the phosphorylation of peptide substrates. The phosphorylated peptides were subsequently captured to the surface of GCE modified with TiO(2)/MWNTs nanocomposite through specific binding of the phosphate groups with TiO(2) nanoparticles. Then the access of redox probe [Fe(CN)(6)](3-/4-) to electrode surface was blocked. As a result, the decrease peak currents were related to the concentrations of the CK2, providing a sensing mechanism for monitoring peptides phosphorylation. The electrochemical strategy can be employed to assay CK2 activity with a low detection limit of 0.07 U/mL. The linear range of the assay for CK2 was 0-0.5 U/mL. Furthermore, the interferences experiments of PKA and inhibition of CK2 have been also studied by using this strategy.     

The toxic influence of silver and titanium dioxide nanoparticles on cultured ovarian granulosa cells

The application of metal nanoparticles in modern society is growing, but there is insufficient data concerning their influence on reproductive processes and comparison of their biological activity. The present experiments aimed to compare the effects of silver and titanium dioxide nanoparticles (AgNPs and TiO2NPs) on ovarian granulosa cell functions. AgNPs and TiO2NPs were added to culture of porcine granulosa cells at doses 0, 0.01, 0.1, 1 or 10 μg/mL. The mRNAs for proliferating cell nuclear antigen (PCNA), cyclin B1, bax and caspase 3 were quantified by RT-PCR; release of progesterone was analyzed by ELISA. It was shown that both AgNPs and TiO2NPs significantly reduced all the measured parameters. ED₅₀ of the inhibitory influence of AgNPs on the main ovarian cell parameters was higher than ED₅₀ of TiO2NPs. The ability of AgNPs and TiO2NPs to suppress ovarian granulosa cell functions should be taken into account by their application.     

Foliar exposure of grapevine (Vitis vinifera L.) to TiO2 nanoparticles under field conditions: Photosynthetic response and flavonol profile

Photosynthetica - In the past decade, utilization of nanostructured materials has increased intensively in a wide range of applications. Titanium dioxide nanoparticles (TiO2 NPs), for instance, can...     

Rational protein modification leading to resistance of enzymes to TiO2-UV irradiation-induced inactivation

Photoexcited TiO2 degrades biomolecules such as nucleic acids, cell membrane proteins, and enzymes. Stabilization of enzyme activity against the deactivation caused by the combination of TiO2-UV is essential if we are to develop novel hybrid materials exhibiting photocatalytic and biocatalytic activities useful for decontamination applications. In this paper we describe the stabilization of a model enzyme, chymotrypsin, against TiO2-UV-induced deactivation by conjugating the enzyme with UV-absorbing, carboxyl-terminated oligo[2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl]ethyl methacrylate] [oligo(HBMA)-COOH]. Chymotrypsin was completely deactivated within 3 h, whereas the chymotrypsin-oligo(HBMA) conjugate retained > 50% activity even after 5 h of exposure to TiO2-UV (lambdamax 365 nm). The degree of enzyme stabilization induced by the conjugated UV absorber was 2-fold higher than that from the equivalent number of conjugated PEG chains. Spectroscopic characterizations revealed that chymotrypsin-oligo(HBMA) absorbs UV light and initially resists photoexcitation of TiO2. Modified chymotrypsin also exhibited resistance to changes in the secondary structure during the deactivation. This method of stabilizing enzymes against photodegradation could be also useful in photolithographic enzyme immobilizations for sensors and arrays or for stabilization of any UV-sensitive protein.     

Direct electrical power generation from urine, wastes and biomass with simultaneous photodecomposition and cleaning

Electric power was for the first time generated directly from urine, wastes, and biomass with simultaneous photodecomposition and cleaning by using a biophotofuel cell (BPFC) composed of a nanoporous TiO2 film semiconductor photoanode and an O2-reducing cathode. Human urine exhibited a PFC characteristics with J(sc) 0.086 mA cm(-2), Voc 0.56 V, and fill factor (FF) 0.50 under irradiation by a solar simulator with AM 1.5 G and 100 mW cm(-2) incident light intensity. Both the soluble and residual parts of waste paper partially solubilized by a H3PO4 aqueous solution were also photodecomposed with simultaneous electrical power generation. As trials of various biomass materials, Coca-Cola (to test colored sample), Japanese rice wine (to test alcohol aqueous solution), and grated radish (to test slurry state sample) also generated effectively electrical power during photodecomposition by a solar simulator.     

Catalytic oxidation of cyclohexane by a binuclear Fe(III) complex biomimetic to methane monooxygenase

A novel binuclear Fe(III) complex [Fe(III)(BPMP)Cl(mu-O)Fe(III)Cl3] (1) was prepared from the reaction between (bis(2-pyridylmethyl)-1,4-piperazine) and [Fe(OH2)6]Cl3, in acetonitrile. The title compound was characterized by spectroscopic, electrochemical and X-ray crystallography analysis. The catalytic activity of the complex was evaluated through cyclohexane oxidation, using hydrogen peroxide as the terminal oxidant. Reaction products were identified by gas chromatography. Conversions up to 19.2% were observed (12.6% and 6.6% yields for cyclohexanol and cyclohexanone, respectively). The catalytic activity exhibited by 1 suggests that it can be considered as a functional biomimetic analog to methane monooxygenase.     

Proteomic analysis of early response lymph node proteins in mice treated with titanium dioxide nanoparticles

Human exposure to nanoparticles is inevitable from natural and anthropogenic sources. Titanium dioxide (TiO2) nanoparticles are increasingly being used in pharmaceutical and cosmetic products. Previous studies revealed that TiO2 levels were significantly increased in tissues (e.g., lymph nodes) after mice were injected with nanosized TiO2. To identify early response lymph node proteins to TiO2 nanoparticles, groups of mice were intradermally injected with a low dose of DeGussa P25 TiO2 nanoparticles or vehicle alone. The proteomes of lymph nodes at 24 h were quantitatively analyzed using trypsin-catalyzed 16O/18O labeling in conjunction with two-dimensional liquid chromatography separation and tandem mass spectrometry (2DLC-MS/MS). A total of 33 proteins were significantly changed (over 1.3-fold, p<0.05) in the mice treated with TiO2 nanoparticles, which accounted for approximately 1% of the total proteins identified. The differentially expressed proteins mainly involve the immune response (e.g., inflammation), lipid and fatty acid metabolism, mRNA processing, and nucleosome assembly. Regulation of functionally distinct classes of proteins could be mediated by estrogen receptor (ESR1), PPARγ, and c-Myc signalings, etc. The differentially expressed proteins identified in this experiment could represent early response proteins to TiO2 nanoparticle treatment in mouse lymph nodes.     

Monitoring of occupational exposure to cyclohexanone by diffusive sampling and urinalysis

The present study was initiated in order to identify the best marker of occupational exposure to cyclohexanone among cyclohexanone and its metabolites in urine. To examine if diffusive samplers are applicable to personal monitoring of exposure to cyclohexanone in workroom air, the performance of carbon cloth to adsorb cyclohexanone in air was studied by experimental exposure of the cloth to cyclohexanone at 5, 10, 25 or 50 ppm (i.e. 20, 40, 100 or 200 mg m-3) for up to 8 h. Cyclohexanone in the exposed cloth was extracted with carbon disulphide followed by gas chromatographic (GC) analysis. The cloth adsorbed cyclohexanone in proportion to the concentration (up to 50 ppm) and the duration (up to 8 h), and responded quantitatively to a 15 min exposure at 100 ppm. In a field survey, end-of-shift urine samples were collected from 24 factory workers occupationally exposed to cyclohexanone (up to 9 ppm) in combination with toluene and other solvents. Urine samples were also collected from 10 subjects with no occupational exposure to solvents. The urine samples were treated with acid or an enzyme preparation for hydrolysis, and extracted with dichloromethane or ethyl acetate. The extracts were analysed by GC for cyclohexanone, cyclohexanol, and trans- and cis-isomers of 1,2- and 1,4-cyclohexanediol. Both cyclohexanol and trans-1,2-cyclohexanediol in urine correlated significantly with time-weighted average intensity of exposure to cyclohexanone. Although trans -1,4-isomer was also excreted, its quantitative relation with cyclohexanone exposure could not be established, because the solvent extraction rate was low and unstable. Excretion of cis-isomers was not confirmed. The two analytes, cyclohexanol and trans-1,2-cyclohexanediol, appeared to be equally valid as exposure markers, but the latter may be superior to the former in the sense that it is sensitive enough to separate the exposed from the non-exposed at 1 ppm or less cyclohexanone exposure.