HPLC with carbohydrate carbamate chiral phases: Influence of chiral phase structure on enantioselectivity

The enantioselective resolution of trans-stilbene oxide and of 23 chiral sulfoxides was investigated on cellulose and amylose tris(arylcarbamate) stationary phases coated on aminopropylated 7 μm spherical silica with 500 Å diameter pores. Cellulose tris-(3,5 dimethylphenylcarbamate) showed good resolving power for many of the sulfoxides and amylose tris-(3,5 dimethoxyphenylcarbamate) showed advantages for the resolution of certain sulfoxides which were not separated on other phases. © 1994 Wiley-Liss, Inc.     

Enantiomeric resolution by HPLC of axial chiral amides using amylose tris[(S)-1-phenylethylcarbamate]

The enantiomeric resolution of a series of N-arylamides was examined on amylose tris[(S)-1-phenylethylcarbamate] coated onto aminopropylated 7 μm silica with 500 Å diameter pores and on naked silica 5 μm particle size with 500 Å diameter pores. The enantiomeric resolution obtained for this series was excellent on both columns. The enantioselectivity of cellulose and amylose tris (3,5-dimethylphenylcarbamate) coated onto APS-Hypersil (120 Å pore size, 5 μm particle size) was also investigated for this series of compounds. Chirality 9:109–112, 1997. © 1997 Wiley-Liss, Inc.     

Chiral discrimination by HPLC on aryl carbamate derivatives of chitin coated onto microporous aminopropyl silica

Optical resolution of a range of racemic compounds was investigated using bis(aryl carbamate) derivatives of chitin coated onto microporous organosilane-modified silica. The influence on chiral discrimination of factors such as the carbamate/support weight ratio, the nature of polysaccharide, and the influence of the aryl group substituents was investigated. The bis(3,5-dimethylphenyl carbamate) derivative of a noncommerical chitin gave the best results. © 1996 Wiley-Liss, Inc.     

Chiral HPLC with carbohydrate carbamates: Influence of support structure on enantioselectivity

The effect of particle size and pore size of the aminopropylated silica support for cellulose tris(phenylcarbamate) and tris(3,5-dimethylphenylcarbamate) chiral HPLC phases was investigated. It was necessary to reduce phase loading below 20% w/w as pore size and particle size were reduced, but high efficiency columns could be prepared at a 15% w/w loading on 5 and 2.5 μm supports with 120-Å-diameter pores. The 2.5 μm phase permits the use of relatively high flow rates and very efficient enantioselective separations of a range of chiral compounds could be achieved in less than 3 min. © 1994 Wiley-Liss, Inc.     

DIATOM SILICA BIOMINERALIZATION: AT NANOSCALE LEVEL A CHEMICALLY UNIFORM PROCESS

Using a high-brilliance synchrotron X-ray source, combined small- and wide-angle X-ray scattering (SAXS and WAXS) was applied to study nanoscale characteristics, in particular pore size in the range of 3 to 65 nm, of a variety of unialgal cultures of centric and pennate diatoms, and of mixed diatom populations sampled in the field. Results of scattering analysis were compared with details of pore size, structure and orientation visible at the electron microscopic level. WAXS patterns did not reveal any crystalline phase or features of microcrystallinity (resolution 0.07 to 0.51 nm), which implies a totally amorphous character of the SiO₂ matrix of the frustule material. SAXS data (resolution 3 to 65 nm) provided information on geometry, size, and distribution of pores in the silica. Overall, two pore regions were recognized that were common to the silica of all samples: the smallest (d less than 10 nm) regularly spaced and shaped spherically, the larger (up to 65 nm) being cylinders or slits. Apparently, at a nanoscale level diatomaceous silica is quite homologous among species, in agreement with the chemical principles of silica polymerization under the conditions of pH and precursor concentrations inside the silicon deposition vesicle. The final frustule "macro"-morphology is of course species-specific, being determined genetically. Synthetically-derived MCM-type silicas have a similarly organized pore distribution in an amorphous silica matrix as we found in all diatom species studied. We therefore suggest that organic molecules of a kind used as structure-directing agents to produce these artificial silicas play a role in the nucleation of the silica polymerization reaction and the shaping of pore morphology inside the silicon deposition vesicle of diatoms. Structure-directing molecules now await isolation from the SDV, followed by identification and characterisation by molecular techniques.     

Variables in the high-performance anion-exchange chromatography of proteins

The effect of mobile phase velocity, separation time, support pore diameter, column length, and temperature on resolution and loading capacity of a new commercially available high-performance anion-exchange support, SynChropak AX-300, has been examined. This material is a macroporous spherical silica of 10 μm particle size with a bonded polymeric amine layer. It was found that the heterogeneity of ovalbumin samples, combined with bovine serum albumin, make them useful probes in evaluation of anion-exchange supports. In the columns of 4.1 mm i.d., the highest resolutions of proteins were achieved at a flow rate of 0.25 ml/min. Up to 10 mg of protein per injection could be applied on a 4.1 × 250 mm AX-300 column with good resolution. Columns of 50 mm length had one-tenth the protein load capacity of a 250-mm column, retaining approximately 75% of the resolution.     

Molecular dynamics simulation of water confined in a nanopore of amorphous silica

Molecular dynamics simulations are performed to study the transport and structural properties of water confined in a cylindrical silica nanopore. The pore wall is amorphous and mimics a typical mesoporous silica material. The diameters of silica pores studied are 4.75, 9.51, 20 and 25 Å. The self-diffusion of water calculated decreases with pore size and indicates much slower transport compared to the bulk phase. Strong adsorption of water to the silica wall is observed in the density profiles, indicating the hydrophilic nature of the wall. The hydrogen-bonding network is strongly affected by water–silica wall interaction. The average number of hydrogen bonds per water decreased with decreasing pore diameter.     

Isolation and characterisation of bacterial strains containing enantioselective DMSO reductase activity: application to the kinetic resolution of racemic sulfoxides

The kinetic resolution of racemic sulfoxides by dimethyl sulfoxide (DMSO) reductases was investigated with a range of microorganisms. Three bacterial isolates (provisionally identified as Citrobacter braakii, Klebsiella sp. and Serratia sp.) expressing DMSO reductase activity were isolated from environmental samples by anaerobic enrichment with DMSO as terminal electron acceptor. The organisms reduced a diverse range of racemic sulfoxides to yield either residual enantiomer depending upon the strain used. C. braakii DMSO-11 exhibited wide substrate specificity that included dialkyl, diaryl and alkylaryl sulfoxides, and was unique in its ability to reduce the thiosulfinate 1,4-dihydrobenzo-2, 3-dithian-2-oxide. DMSO reductase was purified from the periplasmic fraction of C. braakii DMSO-11 and was used to demonstrate unequivocally that the DMSO reductase was responsible for enantiospecific reductive resolution of racemic sulfoxides.     

HPLC enantioseparation on cellulose tris(3,5-dimethylphenylcarbamate) as a chiral stationary phase: Influences of pore size of silica gel,coating amount,coating solvent,and column temperature on chiral discrimination

Cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC) was coated on large-pore silica gels and used as a chiral stationary phase (CSP) for high-performance liquid chromatographic separation of enantiomers. The influences of pore size of silica gel, coating amount of CDMPC, coating solvent, and column temperature on chiral discrimination were investigated. CSPs prepared with a large-pore silica gel having a small surface area showed higher chiral recognition. The amount of CDMPC adsorbed on the silica gel influenced the chiral recognition of some racemates. Loading capacity of racemates increased with an increase of the amount of CDMPC supported on the silica gel, and a CSP coated with 45% CDMPC by weight can be used for both analytical and semi-preparative scale separations. The CDMPC, coated using acetone as the coating solvent, exhibited, in many cases, higher enantioselectivity than that obtained with tetrahydrofuran F as the coating solvent. © 1996 Wiley-Liss, Inc.     

Size-dependent, chromatographic separation of double-stranded DNA which is not based on gel permeation mode

A new procedure for size-dependent fractionation of DNA was investigated. DNA fragments ranging from 10 to 40 kbp were separated by using columns for high-performance gel permeation chromatography. However, the order of elution was opposite to that which would be expected for gel permeation chromatography, i.e., smaller fragments were eluted faster than larger fragments, though separation based on normal gel permeation chromatography was observed when smaller DNA fragments (less than 5 kbp) were applied. The size range of DNA which can be resolved by this new procedure was found to depend on both particle size and flow rate; the use of a column packed with smaller particles or the application of a faster flow rate enabled us to resolve smaller DNA fragments, but the pore size or chemical nature of the column packing had scarcely any effect on the resolution. This mode of separation was attained by using both silica and polymer packings. The results suggest that the separation is based on a hydrodynamic phenomenon.     

Protein-sodium dodecyl sulfate complexes: determination of molecular weight, size and shape by controlled pore glass chromatography

The peak position vs log molecular weight curves of protein-SDS complexes chromatographed on controlled pore glass of narrow pore size distribution is linear over a molecular weight range of 17,000–385,000. A glass with a pore size of approximately 500 Å allows the inclusion of all complexes in this range. Peak position curves on glasses with broad pore distributions show decreased resolution and deviate from linearity at low elution coefficients.Exclusion size analysis of the elution coefficients of individual complexes from different columns with pore diameters ranging from 197 to 650 Å gives from 120 to 423 Å as their longest dimension. Assuming constant hydration and SDS-to-protein ration, the found dimension suggests the shape of a football, rather than a sphere or rigid rod.     

Preparation of high-capacity supports containing protein G immobilized to porous silica

This study examined the preparation of high-capacity silica supports containing immobilized protein G. A maximum content of 39 mg protein G/g silica was obtained when using 100 Å pore size silica, followed by 33 mg/g for 50 Å silica and 9.3-24 mg/g for 300-4000 Å silica. The surface coverage of protein G increased with pore size, with a maximum level of 0.037 μmol/m² being obtained for 4000 Å silica. These supports gave comparable apparent activities (i.e., 30-47% binding to rabbit immunoglobulin G [IgG]), with the highest binding capacities (71-77 mg IgG/g silica) being obtained for 50-100 Å silica.     

A Method for the Synthesis of Aldehydes

Aldehydes were synthesized via α-acetoxy sulfldes from alkyl aryl sulfoxides by the Pummerer reaction with acetic anhydride in the presence of base. By this method, isobutyraldehyde, pentanal, benzaldehyde, and 2-acetylamino-5-methy]benzaldehyde were obtained from isobutyl phenyl sulfoxide, pentyl p-tolyl sulfoxide, benzyl phenyl sulfoxide, and 2-acetylamino-5-methylbenzyl phenyl sulfoxide, respectively. The starting sulfoxides are easily synthesized from olefins, alkyl halides, or alkyl aryl sulfldes.     

Molecular dynamics modelling of tethered organics in confined spaces

A computational method for constructing and evaluating the dynamic behaviour of functionalised hexagonal mesoporous silica (HMS) MCM-41 models is reported. HMS with three pore diameters (1.7, 2.2 and 2.9 nm) were prepared, and, from these, two series of derivative structures were constructed – one with 1,3-diphenylpropyl (DPP) tethers and the other with smaller dimethylsilyl (DMS) tethers attached to the mesopores' internal surfaces. Comparison with experimental data shows that simulation results correctly predict the maximum tether density that can be achieved for each tether and each pore diameter. For the smaller pore models, the extent of DPP functionalisation that can be achieved is limited by the available pore volume. However, for the larger pore model, the extent of functionalisation is limited by access to potentially reactive sites on the pore surface. The dynamic behaviour of the models was investigated over a range of temperatures (240–648 K). At lower temperatures ( < 400 K), the mobility of DPP tethers in the 2.9 nm model is actually less than that observed in either the 2.2 nm model or the 1.7 nm model due to the extensive non-bonded interactions that are able to develop between tethers and the silica surface at this diameter. At higher temperatures, the free ends of these tethers break away from the surface, extend further into the pore space and the DPP mobility in the 2.9 nm model is higher than in the smaller pore systems.     

Biotransformations of aryl alkyl sulfides by whole cells of white-rot Basidiomycetes

White-rot Basidiomycetes promoted the oxidation of aromatic pro-chiral sulfides into sulfoxides with good enantioselectivity, conversion and a small production of sulfones. The reactions were carried out using whole cells of Irpex lacteus, Pycnoporus sanguineus, Trichaptum byssogenum, Trametes rigida, Trametes versicolor and Trametes villosa. The enantioselectivity for all the aryl alkyl sulfoxides was in favor of (S)-enantiomers. Oxidation of (phenylpropyl)sulfide produced (S)-(phenylpropyl)sulfoxide with high enantiomeric excess (e.e. ≥99%) by all the Basidiomycetes employed. Basidiomycetes isolated from Brazilian biomes were used as biocatalysts in the oxidation reaction.     

Analysis of protein adsorption characteristics to nano-pore silica particles by using confocal laser scanning microscopy

The effect of average pore size of nano-pore silica particles on protein adsorption characteristics was determined experimentally by the dissociation constant and the adsorption capacity determined from the Langmuir equation. As the average pore size was increased from 2.2 to 45 nm, the BSA adsorption capacity increased from 16.8 to 84.3 mg/g-silica so as the equilibrium constant (from 2.6 to 9.4 mg/ml). Using confocal microscopy with fluorescence labeling, we could visualize the protein adsorption in situ and determine the minimum pore size required for efficient intraparticle adsorption. The confocal microscopy analysis revealed that BSA was adsorbed mainly on the surface of the particles with a smaller pore size, but diffused further into the interstitial surface when it was sufficiently large. It was concluded that for BSA whose Stoke's diameter is ca. 3.55 nm the minimum pore size of about 45 nm or larger was required for a sufficient adsorption capacity.     

Enantiomerization of Allylic Trifluoromethyl Sulfoxides Studied by HPLC Analysis and DFT Calculations

Enantiomerization of allylic trifluoromethyl sulfoxides occurs spontaneously at room temperature through the corresponding allylic trifluoromethanesulfenates via a [2,3]‐sigmatropic rearrangement. Dynamic enantioselective high‐performance liquid chromatography (HPLC) analysis revealed the stereodynamics of these sulfoxides ranging from chromatographic resolution to peak coalescence at temperatures between 5 and 53 °C. The rate constant of enantiomerization and activation parameters were determined and compared with Density Functional Theory (DFT) calculations. Chirality 28:136–142, 2016. © 2015 Wiley Periodicals, Inc.     

Protein unfolding during reversed-phase chromatography: I. Effect of surface properties and duration of adsorption.

Residue-level features of bovine pancreatic trypsin inhibitor (BPTI) unfolding on reversed-phase chromatography (RPC) surfaces were investigated using hydrogen-deuterium exchange labeling and NMR. A set of silica-based RPC surfaces was used to examine the influence of alkyl chain length and media pore size on adsorbed BPTI conformation. In all cases there was substantial unfolding in the adsorbed state; however, residual protection from exchange was consistently observed. Particle pore size did not influence conformation substantially for C4-alkyl modified silica; however, 120 A pore C18 media produced more hydrogen exchange than any other surface examined. In this case, the radius of curvature inside the pore approaches the size of the BPTI molecule. Generally, the pattern of hydrogen exchange protection was uniform; however, the beta-sheet region was selectively protected on the large-pore C18 media. The beta-sheet region forms a hydrophobic core that forms early when BPTI folds in solution. This suggests that partially unfolded states possessing a native-like structure play an important role in adsorption and elution in RPC. Finally, increased contact time with the surface before elution fostered unfolding and altered chromatographic behavior considerably.     

Direct separation of albendazole sulfoxide enantiomers by liquid chromatography on a chiral column deriving from (S)-N-(3,5-dinitrobenzoyl) tyrosine: application to enantiomeric assays on plasma samples

The direct enantiomeric resolution of albendazole sulfoxide (SOABZ), an anthelmintic drug belonging to the benzimidazole class, is reported on a chiral stationary phase (CSP) synthesized by covalent binding of (S)-N-(3,5-dinitrobenzoyl)tyrosine-O-(2-propen-1-yl) methyl ester on a gamma-mercaptopropyl-silanized silica gel. A comparison with the resolution achieved on commercially available Pirkle-type CSPs obtained from N-(3,5-dinitrobenzoyl) derivatives of (R)-phenyglycine or (S)-phenylalanine is described. Some structurally related chiral sulfoxides including oxfendazole (SOFBZ) are also studied. Optimization of the mobile phase nature and composition is investigated showing that a hexane-dioxane-ethanol ternary mixture affords an almost baseline resolution (Rs = 1.25); however, in this case, albendazole sulfone (SO2ABZ) is eluted between the two sulfoxide enantiomers; accordingly, a hexane-ethanol mobile phase would be preferred for biological samples containing both metabolites. The influence of temperature on the resolution is depicted with a hexane-ethanol mobile phase. Finally, application to the enantiomeric assays of SOABZ in plasmatic extracts of rat, sheep, bovin, and man after oral administration of albendazole (sulfoxidized to SOABZ and SO2ABZ) is reported. Some distortions in the enantiomeric ratios are evidenced depending on the species.     

High-performance reversed-phase chromatographic mapping of 2-pyridylamino derivatives of xyloglucan oligosaccharides.

Xyloglucan oligosaccharides from cotton cell walls and tamarind seeds were derivatized with 2-aminopyridine and subsequently separated by reversed-phase chromatography (r.p.c.) using an octadecylsilyl silica stationary phase and aqueous-organic eluents with 0.01% (v/v) trifluoroacetic acid. The chromatographic behavior of the 2-pyridylamino derivatives of xyloglucan oligosaccharides was examined under a wide range of elution conditions, including gradient steepness and shape, initial acetonitrile concentration in the eluent, and pore size of the r.p.c. packings. Relatively steep acetonitrile gradients resulted in poor resolution of the different xyloglucan fragments, which is believed to be the result of acetonitrile-induced conformational changes. Under these circumstances the elution order of the derivatized xyloglucan oligosaccharides was such that the smaller fragments eluted from the column before the larger ones. R.p.c. packing with a 70-A pore size necessitated relatively high acetonitrile concentration in the eluent when compared with 300-A stationary phase. The r.p.c. mapping of 2-pyridylamino derivatives of xyloglucan oligosaccharides was best achieved when both a wide-pore octadecyl-silyl silica stationary phase and a shallow gradient with consecutive linear segments of increasing acetonitrile concentration in the eluent were employed. This combination yielded rapid r.p.c. maps of the xyloglucan fragments from different sources with high separation efficiencies and concomitantly high resolution. The effects of the nature of the sugar residues in the xyloglucan oligomers and their degree of branching on r.p.c. retention and selectivity are also highlighted.