Selective synthesis of triangular cluster oxido-sulfidocomplexes of Mo and W: High yield preparations of [Mo3O2S2(H2O)9], [W3O2S2(H2O)9], [W2MoO2S2(H2O)9] and their derivatization

Reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ or metallic Mo under hydrothermal conditions (140 °C, 4 M HCl) gives oxido-sulfido cluster aqua complex [Mo₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (1). Similarly, [W₃(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (2) is obtained from [W₂O₂(μ-S)₂(H₂O)₆]²⁺ and W(CO)₆. While reaction of [Mo₂O₂(μ-S)₂(H₂O)₆]²⁺ with W(CO)₆ mainly proceeds as simple reduction to give 1, [W₂O₂(μ-S)₂(H₂O)₆]²⁺ with Mo(CO)₆ produces new mixed-metal cluster [W₂Mo(μ₃-S)(μ-O)₂(μ-S)(H₂O)₉]⁴⁺ (3) as main product. From solutions of 1 in HCl supramolecular adduct with cucurbit[6]uril (CB[6]) {[Mo₃O₂S₂(H₂O)₆Cl₃]₂CB[6]}Cl₂⋅18H₂O (4) was isolated and structurally characterized. The aqua complexes were converted into acetylacetonates [M₃O₂S₂(acac)₃(py)₃]PF₆ (M₃ = Mo₃, W₃, W₂Mo; 5a-c), which were characterized by X-ray single crystal analysis, electrospray ionization mass spectrometry and ¹H NMR spectroscopy. Crystal structure of (H₅O₂)(Me₄N)₄[W₃(μ₃-S)(μ₂-S)(μ₂-O)₂(NCS)₉] (6), obtained from 2, is also reported.     

Preferential azido bridging regulating the structural aspects in cobalt(III) and copper(II)-Schiff base complexes: Syntheses, magnetostructural correlations and catalytic studies

A tridentate NNO donor Schiff base ligand [(1Z,3E)-3-((pyridin-2-yl)methylimino)-1-phenylbut-1-en-1-ol = LH] in presence of azide ions coordinates with cobalt(II) and copper(II) ions giving rise to three new coordination complexes [Co₂(L)₂(μ_1,1-N₃)₂(N₃)₂] (1), [Cu₂(L)₂(μ_1,3-N₃)]·ClO₄ (2) and [(μ_1,1-N₃)₂Cu₅(μ-OL)₂(μ_1,1-N₃)₄(μ_1,1,1-N₃)₂]_n (3). The complexes have been characterized by elemental analysis, FT-IR, UV-Vis spectral studies, and single crystal X-ray diffraction studies. These complexes demonstrate that under different synthetic conditions the azide ions and the Schiff base ligand (LH) show different coordination modes with cobalt(II) and copper(II) ions, giving rise to unusual dinuclear and polynuclear species (1, 2 and 3) whose structural variations are discussed. Magneto-structural correlation for the very rare singly μ_1,3-N₃ bridged Cu^II-Schiff base dinuclear species (2) has been studied. In addition, the catalytic properties of 1 for alkene oxidation and the general catalase-like activity behavior of 2 have been discussed.     

Thiotungstates containing the syn-[W2(O/S)2(μ-S)2] (E = O, S) and cuboidal [W2Cu2(μ3-S)4] cores

Reaction of [W^VIS₄]²⁻ with ethane-1,2-dithiol edtH₂ in the presence of the sulfide scavenger Cd²⁺ yielded the dinuclear tungstate syn-[{(edt)W^V(O/S)}₂(μ-S)₂]²⁻ (1), with the terminal S/O disordered over the two tungsten sites in the ratio 0.8:02. In the presence of thiocyanate, phosphine and CuI, the anionic cuboidal clusters of composition [{(SCN)₃W^V}₂{Cu^I(PPh₃)}₂(μ₃-S)₄]²⁻ (2) and (3, diphos = 1,2-bis(o-diphenylphosphinophenyl)ethane), and possibly via an intermediate [{(SCN)₃W^VS}₂(μ-S)₂]⁴⁻. The crystal and molecular structures of [Et₄N]₂1, [Et₄N]₂2 · H₂O and [Et₄N]₂3 · H₂O have been determined.     

Synthesis and characterization of platinum(IV) complexes with N,S and S,S heterocyclic ligands

The reactions of [PtMe₃(OAc)(bpy)] (4) with the N,S and S,S containing heterocycles, pyrimidine-2-thione (pymtH), pyridine-2-thione (pytH), thiazoline-2-thione (tztH) and thiophene-2-thiol (tptH), resulted in the formation of the monomeric complexes [PtMe₃(-κS)(bpy)] ( = pymt, 5; pyt, 6; tzt, 7; tpt, 8), where the heterocyclic ligand is coordinated via the exocyclic sulfur atom. In contrast, in the reactions of [PtMe₃(OAc)(Me₂CO)_x] (3, x = 1 or 2) with pymtH, pytH, tztH and tptH dimeric complexes [{PtMe₃(μ-)}₂] (μ- = pymt, 9; pyt, 10; tzt, 11) and the tetrameric complex [{PtMe₃(μ₃-tpt-κS)}₄] (12), respectively, were formed. The complexes were characterized by microanalyses, ¹H and ¹³C NMR spectroscopy and negative ESI-MS (12) measurements. Single-crystal X-ray diffraction analysis of [PtMe₃(pymt-κS)(bpy)] (5) exhibited a conformation where the pymt ligand lies nearly perpendicular to the complex plane above the bpy ligand that was also confirmed by quantum chemical calculations on the DFT level of theory.     

Hydrogen-bonding assemblies constructed from metalloligand building blocks and H2O

New hydrogen-bonding assemblies were synthesized from the reaction of a metalloligand, [Cu(2,4-pydca)₂]²⁻ (L^Cu) (2,4-pydca = 2,4-pyridinedicarboxylate), with a Fe^II ion or an imidazole in an aqueous medium and crystallographically characterized. The obtained compounds, [Fe(H₂O)₆][Cu(2,4-pydca)₂] (1) and [Cu(2,4-pydca)(imidazole)₂] · 2H₂O (2), have metalloligand dimer units, [Cu₂(2,4-pydca)₄]⁴⁻ and [Cu₂(2,4-pydca)₂(imidazole)₄], respectively, each of which assembles by π-π (1) and hydrogen-bonding (2) interactions to form 1-D metalloligand arrays. The 1-D metalloligand arrays are linked by rich hydrogen-bonding interactions via H₂O molecules.     

Sn-S and Ru-Ru bonds cleavage reactions between [Ph3SnS(CH2)3SSnPh3] and Ru3(CO)12: X-ray crystal structures of [Ph3SnS(CH2)3SSnPh3] and trans-[Ru(CO)4(SnPh3)2]

The organotin complex [Ph₃SnS(CH₂)₃SSnPh₃] (1) was synthesized by PdCl₂ catalyzed reaction between Ph₃SnCl and disodium-1,3-propanedithiolate which in turn was prepared from 1,2-propanedithiol and sodium in refluxing THF. Reaction of 1 with Ru₃(CO)₁₂ in refluxing THF affords the mononuclear complex trans-[Ru(CO)₄(SnPh₃)₂] (2) and the dinuclear complex [Ru₂(CO)₆(μ-κ²-SCH₂CH₂CH₂S)] (3) in 20 and 11% yields, respectively, formed by cleavage of Sn-S bond of the ligand and Ru-Ru bonds of the cluster. Treatment of pymSSnPPh₃ (pymS = pyrimidine-2-thiolate) with Ru₃(CO)₁₂ at 55-60 °C also gives 2 in 38% yield. Both 1 and 2 have been characterized by a combination of spectroscopic data and single crystal X-ray diffraction analysis.     

Bidentate guanidine ligands with ethylene spacer in copper-dioxygen chemistry: Structural characterization of bis(μ-hydroxo) dicopper complexes

The syntheses of the aliphatic bidentate guanidine-amine-hybrid ligands DMEGdmae (L1), TMGdmae (L2), TMGdeae (L3) and DPipGdmae (L4) as well as the reaction of their Cu(I) complexes with molecular oxygen (monitored by UV-Vis spectroscopy) are reported. The molecular structures of 10 bis(μ-hydroxo) dicopper complexes based on these ligands are described. The solid state structures of [Cu₂(μ-OH)₂(DMEGdmae)₂]X₂ (X⁻ = I⁻ (1), CF₃SO₃⁻ (2), SbF₆⁻ (3), PF₆⁻ (4)), [Cu₂(μ-OH)₂(TMGdmae)₂]X₂ (X⁻ = I⁻ (5), CF₃SO₃⁻ (6)), [Cu₂(μ-OH)₂(TMGdeae)₂]Cu₂I₄ (7) and [Cu₂(μ-OH)₂(DPipGdmae)₂]X₂ (X⁻ = CF₃SO₃⁻ (8), SbF₆⁻ (9), PF₆⁻ (10)) show a square-planar distorted coordination of the copper(II) ion. The bis(μ-hydroxo) dicopper complex 1 exhibits a Cu···Cu distance of 2.860(1) Å, which is one of the smallest observed for hydroxo-bridged copper compounds so far. The influence of the anion on the structure of the bis(μ-hydroxo) dicopper(II) unit is analyzed for the reported complexes and a literature overview with emphasis on the structural characteristics of the Cu₂O₂ moiety of bis(μ-hydroxo) dicopper(II) and bis(μ-oxo) dicopper(III) is given.     

Aqua bridge cleavage and metal ion extrusion by thiocyanate anions in a dicopper complex

Reaction of the imidazolidinyl phenolate-based ligand, H₃L [(2-(2′-hydroxyphenyl)-1,3-bis[4-(2-hydroxyphenyl)-3-azabut-3-enyl]-1,3-imidazolidine)] with Cu(ClO₄)₂·6H₂O produces an aqua-bridged cationic reactant complex [Cu₂(μ-H₂O)(μ-L)][ClO₄]·1.5H₂O (1·1.5H₂O). Solution phase interaction of 1·1.5H₂O with SCN⁻ anions in 1:1 molar ratio leads to [Cu₂(μ-L)(NCS)]·2H₂O (2·2H₂O) that does not possess anymore the reactive aqua bridge but instead a terminal SCN⁻ anion coordinated only to one Cu^II ion. Whereas in 1:2 molar ratio, partial extrusion of the Cu^II ions takes place to generate in situ [Cu(NCS)₃(OH₂)]⁻ anions. These complex anions then quantitatively replace anions in 1·1.5H₂O via ‘anion metathesis’ and concurrently remove the aqua bridge by coordination of linear MeCN to one of the Cu^II ions to give [Cu₂(μ-L)(CH₃CN)][Cu(NCS)₃(OH₂)] (3). The literature unknown [Cu(NCS)₃(OH₂)]⁻ anion forms an intimate H-bonded assembly with the cationic part of 3 to yield a novel [Cu₃] isosceles triangle. The precursor complex is known as antiferromagnetic whereas in 2·2H₂O, the Cu^II (S = 1/2) ions in a dinuclear entity exhibit ferromagnetic interactions (J/k_B = +15.0 K and g = 2.22) to yield an S_T = 1 spin ground state in good agreement with the M versus H data below 8 K.     

fac-/mer-[RuCl3(NO)(P-N)] (P-N = [o-(N,N-dimethylamino)phenyl]diphenylphosphine): Synthesis, characterization and DFT calculations

Complex fac-[RuCl₃(NO)(P-N)] (1) was synthesized from the reaction of [RuCl₃(H₂O)₂(NO)] and the P-N ligand, o-[(N,N-dimethylamino)phenyl]diphenylphosphine) in refluxing methanol solution, while complex mer,trans-[RuCl₃(NO)(P-N)] (2) was obtained by photochemical isomerization of (1) in dichloromethane solution. The third possible isomer mer,cis-[RuCl₃(NO)(P-N)] (3) was never observed in direct synthesis as well as in photo- or thermal-isomerization reactions. When refluxing a methanol solution of complex (2) a thermally induced isomerization occurs and complex (1) is regenerated.The complexes were characterized by NMR (³¹P{¹H}, ¹⁵N{¹H} and ¹H), cyclic voltammetry, FTIR, UV-Vis, elemental analysis and X-ray diffraction structure determination. The ³¹P{¹H} NMR revealed the presence of singlet at 35.6 for (1) and 28.3 ppm for (2). The ¹H NMR spectrum for (1) presented two singlets for the methyl hydrogens at 3.81 and 3.13 ppm, while for (2) was observed only one singlet at 3.29 ppm. FTIR Ru-NO stretching in KBr pellets or CH₂Cl₂ solution presented 1866 and 1872 cm⁻¹ for (1) and 1841 and 1860 cm⁻¹ for (2). Electrochemical analysis revealed a irreversible reduction attributed to Ru^II-NO⁺ → Ru^II-NO⁰ at −0.81 V and −0.62 V, for (1) and (2), respectively; the process Ru^II → Ru^III, as expected, is only observed around 2.0 V, for both complexes.Studies were conducted using ¹⁵NO and both complexes were isolated with ¹⁵N-enriched NO. Upon irradiation, the complex fac-[RuCl₃(NO)(P-N)] (1) does not exchange ¹⁴NO by ¹⁵NO, while complex mer,trans-[RuCl₃(NO)(P-N)] (2) does. Complex mer,trans-[RuCl₃(¹⁵NO)(P-N)] (2′) was obtained by direct reaction of mer,trans-[RuCl₃(NO)(P-N)] (2) with ¹⁵NO and the complex fac-[RuCl₃(¹⁵NO)(P-N)] (1′) was obtained by thermal-isomerization of mer,trans-[RuCl₃(¹⁵NO)(P-N)] (2′).DFT calculation on isomer energies, electronic spectra and electronic configuration were done. For complex (1) the HOMO orbital is essentially Ru (46.6%) and Cl (42.5%), for (2) Ru (57.4%) and Cl (39.0%) while LUMO orbital for (1) is based on NO (52.9%) and is less extent on Ru (38.4%), for (2) NO (58.2%) and Ru (31.5%).     

Coordination compounds of Cd(II) with several bidentate-NN′ and tridentate-NN′N nitrogen donor ligands. Cd NMR studies of monomeric compounds containing nitrogen donor atoms

Reaction of CdCl₂ with N-alkylaminopyrazole ligands 1-[(2-ethylamino)ethyl]-3,5-dimethylpyrazole (deae), 1-[(2-(tert-butylamino)ethyl)]-3,5-dimethylpyrazole (deat), bis-[(3,5-dimethylpyrazolyl)methyl]ethylamine (bdmae), and bis-[(3,5-dimethylpyrazolyl)ethyl]ethylamine (ddae) in absolute ethanol yields [CdCl₂(NN′)] (NN′ = deae (1), deat (2)), [CdCl₂(bdmae)] (3), and [CdCl(ddae)]₂[CdCl₄] (4). The Cd(II) complexes have been characterised by elemental analyses, conductivity measurements, IR, ¹H, ¹³C{¹H} and ¹¹³Cd NMR spectroscopies, and X-ray diffraction methods. ¹H and ¹¹³Cd NMR experiments at variable temperature for 3 and 4 show that dynamic processes are taking place in solution. We report the measurements of ¹¹³Cd NMR chemical shift data for complexes 1-4 in solution. X-ray crystal structures for complexes 2 and 3 have been determined. The Cd(II) is coordinated to the deat ligand, in 2, by one nitrogen atom of the pyrazolyl group and one nitrogen atom of the amine. It finishes a tetrahedral geometry with two chlorine atoms. The bdmae ligand is linked to Cd(II), in 3, by two nitrogens atoms of the pyrazolyl groups and one amine nitrogen, along with two chlorine atoms, in a distorted trigonal bipyramidal geometry.     

A rare example of a di-cationic hydrido carbonyl tetra-nuclear cluster, [H2Rh2Pt2(CO)7(PPh3)3]

Addition of excess CF₃CO₂H (HTFA) to [Rh₂Pt₂(CO)₇(PPh₃)₃], I, under nitrogen results in the formation of a salt (X²⁺ Y²⁻), which contains only the second example of a di-cationic carbonyl hydride tetra-nuclear cluster, [H₂Rh₂Pt₂(CO)₇(PPh₃)₃]²⁺, X²⁺, and a presently partially characterized polymetallic anion Y²⁻. The di-cation X²⁺ has been characterized by mass spectrometry and a variety of multinuclear NMR methods. Since there is no difference in the electron count for I and X²⁺, it is probable that both I and X²⁺ adopt similar butterfly metallic frameworks with a Rh-Rh hinge; in X²⁺, there are two bridging hydrides to the same wing-tip Pt but the phosphine site occupancies on the Rh₂Pt₂-framework in I and X²⁺ are different.     

Al4(C5Me4H)4: Structure, reactivity and bonding

The synthesis of Al₄R₄ (R = C₅(CH₃)₄H) (3) and the tetrahedral structure in the solid state are described. These results as well as the ²⁷Al NMR spectra of 3 in solution are in line with the data obtained from DFT calculations. These calculations also support the failed observation of a monomeric AlR species in solution. Monomeric and tetrameric molecules of 3 are discussed with respect to those of (AlCp^∗)₄ (1) and (AlCp)₄ (2). The increasing Al-Al bond strength from 1 to 3 and 2 from X-ray data is also supported by structural and energetic results from DFT calculations.     

Bioinspired FeIIICdII and FeIIIHgII complexes: synthesis, characterization and promiscuous catalytic activity evaluation

In this work we report on the synthesis, crystal structure, and physicochemical characterization of the novel dinuclear [Fe^IIICd^II(L)(μ-OAc)₂]ClO₄·0.5H₂O (1) complex containing the unsymmetrical ligand H₂L = 2-bis[{(2-pyridyl-methyl)-aminomethyl}-6-{(2-hydroxy-benzyl)-(2-pyridyl-methyl)}-aminomethyl]-4-methylphenol. Also, with this ligand, the tetranuclear [Fe₂^IIIHg₂^II(L)₂(OH)₂](ClO₄)₂·2CH₃OH (2) and [Fe^IIIHg^II(L)(μ-CO₃)Fe^IIIHg^II(L)](ClO₄)₂·H₂O (3) complexes were synthesized and fully characterized. It is demonstrated that the precursor [Fe^III₂Hg^II₂(L)₂(OH)₂](ClO₄)₂·2CH₃OH (2) can be converted to (3) by the fixation of atmospheric CO₂ since the crystal structure of the tetranuclear organometallic complex [Fe^IIIHg^II(L)(μ-CO₃)Fe^IIIHg^II(L)](ClO₄)₂·H₂O (3) with an unprecedented {Fe^III(μ-O_phenoxo)₂(μ-CO₃)Fe^III} core was obtained through X-ray crystallography. In the reaction 2 → 3 a nucleophilic attack of a Fe^III-bound hydroxo group on the CO₂ molecule is proposed. In addition, it is also demonstrated that complex (3) can regenerate complex (2) in aqueous/MeOH/NaOH solution. Magnetochemical studies reveal that the Fe^III centers in 3 are antiferromagnetically coupled (J = − 7.2 cm^− 1) and that the Fe^III-OR-Fe^III angle has no noticeable influence in the exchange coupling. Phosphatase-like activity studies in the hydrolysis of the model substrate bis(2,4-dinitrophenyl) phosphate (2,4-bdnpp) by 1 and 2 show Michaelis-Menten behavior with 1 being ~ 2.5 times more active than 2. In combination with k_H/k_D isotope effects, the kinetic studies suggest a mechanism in which a terminal Fe^III-bound hydroxide is the hydrolysis-initiating nucleophilic catalyst for 1 and 2. Based on the crystal structures of 1 and 3, it is assumed that the relatively long Fe^III…Hg^II distance could be responsible for the lower catalytic effectiveness of 2.     

Synthesis and characterization of tetrairon-tungsten cluster complex containing a μ4, η-carbonyl ligand

Reaction of [(PPh₂C₅H₄)Cp₃Fe₄(CO)₄] (1) with (CO)₄W(CH₃CN)₂ at ambient temperature affords [(CO)₄W(PPh₂C₅H₄)Cp₃Fe₄(CO)₄] (2) as the major product, together with a small amount of [(CO)₅W(PPh₂C₅H₄)Cp₃Fe₄(CO)₄] (3). Compound 3 can be obtained in good yield by treating (CO)₅W(CH₃CN) with equal molar of 1, and reaction of 3 with Me₃NO in acetonitrile solvent produces 2 exclusively. The crystal structures of 2 and 3 have been determined by an X-ray diffraction study. Compound 2 contains an interesting μ₄, η²-CO ligand, where two electrons donated by the carbon atom are involved to bridge a Fe₃ face and two electrons from oxygen are donated to the tungsten(0) atom.     

Use of a cubane-type Mo3CoS4 molecular cluster as paramagnetic unit in the synthesis of hybrid charge-transfer salts

Selective substitution of the chlorine atom coordinated to cobalt in the paramagnetic Mo₃(CoCl)S₄(dmpe)₃Cl₃ (dmpe = 1,2-bis(dimethylphosphanyl) ethane) complex with a S = 1/2 ground state has been achieved by iodine oxidation to afford the also paramagnetic [Mo₃(CoI)S₄(dmpe)₃Cl₃]I ([1]I) salt with a S = 1 ground state in almost quantitative yield. Replacement of chorine by iodine has no significant effect on the structural and electrochemical properties of the Mo₃CoS₄ system. Metathesis of the [1]I salt with the paramagnetic nickel anionic dithiolate [Ni(mnt)₂]⁻ (mnt = maleonitrilodithiolate) affords [1]₂[Ni(mnt)₂]. The stoichiometry evidenced by X-ray analysis reveals that reduction of the [Ni(mnt)₂]⁻ radical to the corresponding diamagnetic closed shell [Ni(mnt)₂]²⁻ dianion, presumably via dismutation, has occurred during the metathesis process. The crystal structure of [1]₂[Ni(mnt)₂] consists of [Ni(mnt)₂]²⁻ dianions sandwiched by two cluster 1⁺ cations which yield {1⁺·[Ni(mnt)₂]²⁻·1⁺} subunits arranged along the crystallographic c axis. Magnetic susceptibility measurements for [1]₂[Ni(mnt)₂] show a χT product of 0.99 emu K/mol largely unchanged in the 10-300 K range. This behavior agrees with the presence of an S = 1 cluster 1⁺ cation while the Ni(mnt)₂ moiety does not contribute to the paramagnetism of the sample.     

Synthesis of [SnPh2(SR)2] SR = SC6F4-4-H, SC6F5: Reactivity towards group 10 transition metal complexes

The organometallic tin(IV) complexes [SnPh₂(SR^F)₂] SR^F = ⁻SC₆F₄-4-H (1), ⁻SC₆F₅ (2), were synthesized and their reactivity with [MCl₂(PPh₃)₂] M = Ni, Pd and Pt explored. Thus, transmetallation products were obtained affording polymeric [Ni(SR^F)(μ-SR^F)]_n, monomeric cis-[Pt(PPh₃)₂(SC₆F₄-4-H)₂] (3) and cis-[Pt(PPh₃)₂(SC₆F₅)₂] (4) and dimeric species [Pd(PPh₃)(SC₆F₄-4-H)(μ-SC₆F₄-4-H)]₂ (5) and [Pd(PPh₃)(SC₆F₅)(μ-SC₆F₅)]₂ (6) for Ni, Pt and Pd, respectively. The crystal structures of complexes 1, 2, 3, 4 and 6 were determined.     

H2O2 reactivity of a dinuclear copper(II) complex incorporating a constrained binucleating polyaminopyridyl ligand and a phosphodiester coligand

A dinuclear copper(II) complex [Cu₂(PD)(DPP⁻)₂](ClO₄)₂ (1) incorporating a constrained binucleating hexadenate ligand, PD (1,3-bis{bis[(2-pyridyl)ethyl]amino}benzene), and coligand, DPP⁻ (diphenylphosphate) was synthesized and characterized, with a specific outlook towards evaluating spectroscopic and H₂O₂ reactivity relevant to the active-sites of noncoupled dinuclear copper enzymes, DβM and PHM. In solution, complex 1 exhibits a broad ¹H NMR in the range −25 to +60 ppm and has a solution magnetic moment (μ) of ∼2.0 B.M./Cu(II), typical of a noninteracting dicopper(II) center. The room temperature H₂O₂ reactivity of 1 monitored by UV-Vis spectroscopy reveals the formation of a copper(II)-dioxygen intermediate 1a, which in turn leading to a arene ligand hydroxylation (PD-O⁻) and thus provide a new doubly-bridged dicopper(II) complex, [Cu₂(PD-O⁻)(DPP⁻)](ClO₄)₂ (2). The dioxygen intermediate produces OPPh₃ on treatment with PPh₃ revealing it is an electrophilic hydroperoxide oxidant. Solution magnetic moment of 1.61 B.M./Cu(II) indicates the product complex 2 is a moderately interacting dicopper(II) center and its ¹H NMR spans between −20 and +180 ppm. A comparison of the optical absorption features of complex 1a with related dinuclear hydroperoxo-copper(II) complexes is discussed.     

A trinuclear copper(II) complex with 2,5-pyridine-dicarboxylato bridges - [Cu3(2,5-pydc)2(Me5dien)2(H2O)2(BF4)2] · H2O: Synthesis, crystal structure and magnetic properties

A trinuclear copper(II) complex, [Cu₃(2,5-pydc)₂(Me₅dien)₂(BF₄)₂(H₂O)₂] · H₂O 1, has been constructed from 2,5-pyridine-dicarboxylato bridges (2,5-pydc²⁻) and N,N,N′,N″,N″-pentamethyl-diethylenetriamine (Me₅dien) acting as a blocking ligand. The copper ions, within the centrosymmetric trinuclear cations, are connected by two 2,5-pydc²⁻ bridges, with an intramolecular Cu···Cu separation of 8.432 Å. The central copper ion exhibits an elongated octahedral geometry, with semicoordinated ions, while the terminal ones are pentacoordinated (distorted square-pyramidal geometry). The cryomagnetic investigation of 1 reveals an antiferromagnetic coupling of the copper(II) ions (J = −5.9 cm⁻¹, H = −JS_Cu1S_Cu2 − JS_Cu2S_Cu1a).     

ortho-Carom-N bond fusion in aniline associated with electrophilic chlorination reactions at ruthenium(III) coordinated acetylacetonates

In an unusual reaction of [Ru^III(acac)₂(CH₃CN)₂](ClO₄) ([1], acac = acetylacetonate) and aniline (Ph-NH₂), resulted in the formation of ortho-semidine due to dimerisation of aniline via oxidative ortho-C_arom-N bond formation reaction. This oxidation reaction is associated with stepwise chlorination of coordinated acac ligands at the γ-carbon atom resulting in the formation of [Ru^III(acac)₂L⁻] [2a], [Ru^III(Cl-acac)(acac)L⁻] [2b], [Ru^III(acac)(Cl-acac)L⁻] [2c] and [Ru^III(Cl-acac)₂L⁻] [2d] (L⁻ = N-phenyl-ortho-semiquinonediimine) complexes, respectively. These have been characterized by ¹H NMR, UV-Vis-NIR, ESI-MS and cyclic voltammetry studies. Single crystal X-ray structures of 2c and 2d are reported. Crystallographic structural bond parameters of 2c and 2d revealed bond length equalization of C-C, C-O and M-O bonds. It has been shown that perchlorate () counter anion, present in the starting ruthenium complex, acts as the oxidizing agent in bringing about oxidation of Ph-NH₂ to ortho-semidine. The chloronium ions, produced in situ, chlorinate the coordinated acac ligands at the γ-carbon atom. Such electrophilic substitution of coordinated acac ligands indicates that the Ru-acac metallacycles in the reference compounds are aromatic. The complexes showed an intense and featureless band centered near 520 nm, and a structured band near 275 nm. These displayed one reversible cathodic response in the range, −1.1 to −0.8 V and one reversible anodic response between 0.4 and 0.6 V versus the Saturated Calomel reference Electrode, SCE. The response at the anodic potential is due to oxidation of the coordinated ligand L, while the reversible response at cathodic potential is due to reduction of the metal center.     

Single molecule magnet: Heterodinuclear cyano-bridged cubic cluster [(Tp)8Fe4Ni4(CN)12] (Tp = hydrotris(1-pyrazolyl)borate)

The octanuclear cyano-bridged cluster [(Tp)₈Fe₄Ni₄(CN)₁₂] · H₂O · 24CH₃CN (1) (Tp = hydrotris(1-pyrazolyl)borate) showing magnetic properties of single-molecule magnet has been synthesized by reaction of [fac-Fe(Tp)(CN)₃]⁻ with {(Tp)Ni(NO₃)} species formed from an equimolar reaction mixture of Ni(NO₃)₂ · 6H₂O and KTp in MeCN. The X-ray analysis of 1 shows molecular cube structure in which Fe^III and Ni^II ions reside in alternate corners. The average intramolecular Fe?Ni distance is 5.124 Å. Out-of-phase ac susceptibility and reduce magnetization measurements show that 1 is a single molecule magnet with ground spin state S = 6 and spin reversal energy barrier U = 14 K. Magnetic hysteresis loops were also observed by applying fast sweeping field.