Synthesis, structure and properties of TTF-carboxylate bridged paddlewheel dirhodium complexes, Rh2(BuCO2)3(TTFCO2) and Rh2(BuCO2)2(TTFCO2)2

Reaction of tetrathiafulvalene carboxylic acid (TTFCO₂H) with paddlewheel dirhodium complex Rh₂(Bu^tCO₂)₄ yielded TTFCO₂-bridged complexes Rh₂(Bu^tCO₂)₃(TTFCO₂) (1) and cis- and trans-Rh₂(Bu^tCO₂)₂(TTFCO₂)₂ (cis- and trans-2). Their triethylamine adducts [1(NEt₃)₂] and cis-[2(NEt₃)₂] were purified and isolated with chromatographic separation, and characterized with single crystal X-ray analysis. Trans-[2(NEt₃)₂] is not completely separated from a mixture of cis- and trans-[2(NEt₃)₂], but its single crystals were obtained from a solution of the mixture. A three-step quasi-reversible oxidation process was observed for 1 in MeCN. The first two steps correspond to the oxidation of the TTFCO₂ moiety and the last one is the oxidation of the Rh₂ core. The oxidation of cis-2 is observed as a two-step process with very similar E_1/2 values to those of the first two processes for 1. Both 1⁺ and cis-2²⁺ in MeCN at room temperature show isotropic ESR spectra with a g value of 2.008 and a_H = 0.135 mT for two equivalent H atoms and a_H = 0.068 mT for one H atom. The redox and ESR data of cis-2 suggest that the intramolecular interaction between the TTF moieties is very small.     

Synthesis and characterization of cis-[(PPh3)2Pt{9-MeAd(-H),NN}]X (X = NO3, PF6): The first example of a platinum(II) complex containing the N,N-chelated 9-methyladenine anion

Reaction between the binuclear hydroxo complex cis-[(PPh₃)₂Pt(μ-OH)]₂X₂ (X⁻ = NO₃, 1a; , 1b) and the model DNA base 9-methyladenine (9-MeAd) leads to the formation of the mononuclear species cis-[(PPh₃)₂Pt{9-MeAd(-H),N⁶N⁷}]X (X⁻ = NO₃, 2a; PF₆, 2b), in which the nucleobase chelates the Pt(II) ion with the N6 and N7 atoms. The coordination mode of the nucleobase has been determinated through a multinuclear (¹H, ³¹P, ¹³C, ¹⁵N and ¹⁹⁵Pt) NMR analysis and the nuclearity of the complex has been obtained by E.S.I. mass spectrometry. 2 represents the first example of an isolated platinum complex in which the NH₂-deprotonated adenine exhibits this binding mode.     

Antisymbiosis. Preferential coordination of anionic oxygen versus neutral sulfur donor atoms of methylsulfanyl- or methylsulfinyl-acetato, 2-benzoato and 2-phenolato to the cis-Pt(PPh3)2 and Pt(dppe) residues

The interaction of an excess of the title ligands L⁻ with the cis-Pt(phos)₂ moieties gives compounds a-bcis-[Pt(L-O)₂(phos)₂] (a, phos = P(Ph)₃; b, phos = 1/2 dppe), in which O- is preferred to S-coordination. Such preference is confirmed by the fact that the same products are obtained by reaction of excess of L⁻ with the previously reported a-d complexes [Pt(L-O,S)(phos)₂]⁺, (c, phos = PPh₃, d, phos = 1/2 dppe), for which chelate ring opening occurs with rupture of Pt-S rather than Pt-O bonds. Compound a can be obtained also by oxidative addition of HL to [Pt(PPh₃)₃]. The Pt-O bonds in compounds a-d are stable towards substitution by Me₂SO, pyridine and tetramethylthiourea. Substitution of L’s occurs with N,N′-diethyldithiocarbamate, which forms a very stable chelate with Pt(II). Thiourea and N,N′-dimethylthiourea also react, because they give rise to cyclometallated products [Pt(phos)₂(NRC(S)NHR)]⁺ (R = H, CH₃), with one ionised thioamido group, as revealed by an X-ray investigation of [Pt(PPh₃)₂(NHC(S)NH₂)]⁺. The preference of O versus S coordination, as well as the stability of the Pt-O bonds, are discussed in terms of antisymbiosis.     

Sn-S and Ru-Ru bonds cleavage reactions between [Ph3SnS(CH2)3SSnPh3] and Ru3(CO)12: X-ray crystal structures of [Ph3SnS(CH2)3SSnPh3] and trans-[Ru(CO)4(SnPh3)2]

The organotin complex [Ph₃SnS(CH₂)₃SSnPh₃] (1) was synthesized by PdCl₂ catalyzed reaction between Ph₃SnCl and disodium-1,3-propanedithiolate which in turn was prepared from 1,2-propanedithiol and sodium in refluxing THF. Reaction of 1 with Ru₃(CO)₁₂ in refluxing THF affords the mononuclear complex trans-[Ru(CO)₄(SnPh₃)₂] (2) and the dinuclear complex [Ru₂(CO)₆(μ-κ²-SCH₂CH₂CH₂S)] (3) in 20 and 11% yields, respectively, formed by cleavage of Sn-S bond of the ligand and Ru-Ru bonds of the cluster. Treatment of pymSSnPPh₃ (pymS = pyrimidine-2-thiolate) with Ru₃(CO)₁₂ at 55-60 °C also gives 2 in 38% yield. Both 1 and 2 have been characterized by a combination of spectroscopic data and single crystal X-ray diffraction analysis.     

Multinuclear magnetic resonance studies of the reactions of the antitumor complexes cis-Pt(L)2X2 and cis-Pt(NH3)(L)X2 (L = cyclobutylamine and cyclopentylamine) with guanosine and other bases and crystal structures of Pt(cyclopentylamine)2I2

The crystal structures of two Pt(cyclopentylamine)₂I₂ compounds were determined by X-ray diffraction methods. Both crystals contain disordered cyclopentylamine ligands. Crystal I contains two independent trans-Pt(cyclopentylamine)₂I₂ molecules and all the C atoms are disordered on two positions. The second crystal (II) is most interesting since it contains both cis- and trans-Pt(cyclopentylamine)₂I₂ isomers in the same unit cell. It was prepared from the recrystallization of the cis isomer in acetone. The C atoms of the trans molecule in crystal II are disordered on two positions, while only one position was determined in the cis molecule, although some of the C thermal factors are quite high. The reactions of cis-Pt(amine)₂X₂ and cis-Pt(NH₃)(amine)X₂ (amine = cyclobutylamine and cyclopentylamine) with guanosine in water were studied in different Pt:guanosine proportions by multinuclear (¹H, ¹⁹⁵Pt and ¹⁵N) magnetic resonance spectroscopy. The presence of several species in solution was observed. For the mixed-cyclobutylamine compound, ¹⁵N NMR has shown that some of the NH₃ ligands have been displaced from the coordination sphere in the presence of an excess of guanosine. The reactions of the two mixed-ligand complexes cis-Pt(NH₃)(amine)Cl₂ with 9-methylguanine, inosine and 9-methylhypoxanthine were also studied in water and the results are discussed.     

Synthesis and characterization of isopropylamine complexes of lanthanide(II) diiodides: Molecular structure of TmI2(PrNH2)4 and EuI2(PrNH2)4

It was found that the lanthanide diiodides LnI₂ (1) (Ln = Nd, Sm, Eu, Dy, Tm, Yb) are dissolved in isopropylamine (IPA) without redox transformations. Stability of the formed solutions decreases in a row Eu ≈ Yb > Sm > Tm > Dy > Nd. Removing of a solvent in vacuum leaves complexes LnI₂(IPA)_x (2) (Nd, x = 5; Sm, Eu, Dy, Tm, Yb, x = 4) as crystalline colored solids. Stability of 2-Nd,Dy,Tm is higher than that of known THF or DME coordinated salts. Divalent state of metal in the products is confirmed by data of UV-Vis spectroscopy, magnetic measurements and their chemical behavior. Structure of 2-Eu and 2-Tm was established by X-ray diffraction analysis. Oxidation of 2-Nd,Dy in IPA affords amine-amides (PrⁱNH)Ln(IPA)_y (3) (Nd, y = 4; Dy, x = 3). n-Propylamine also dissolves the iodides 1-Sm,Eu,Dy,Tm,Yb but stability of the solutions is significantly lower. 1-Nd vigorously reacts with PrⁿNH₂ even at −30 °C which hampers the formation of the solution.     

Reaction of [MCl2(CH3CN)2] (M = Pd(II), Pt(II)) compounds with N1-alkylpyridylpyrazole-derived ligands

Palladium(II) and platinum(II) complexes with N-alkylpyridylpyrazole-derived ligands, 2-(1-ethyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L¹) and 2-(1-octyl-5-phenyl-1H-pyrazol-3-yl)pyridine (L²), cis-[MCl₂(L)] (M = Pd(II), Pt(II)), have been synthesised. Treatment of [PdCl₂(L)] (L = L¹, L²) with excess of ligand (L¹, L²), pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ and NaBPh₄ produced the following complexes: [Pd(L)₂](BPh₄)₂, [Pd(L)(py)₂](BPh₄)₂ and [Pd(L)(PPh₃)₂](BPh₄)₂. All complexes have been characterised by elemental analyses, conductivity, IR and NMR spectroscopies. The crystal structures of cis-[PdCl₂(L²)] (2) and cis-[PtCl₂(L¹)] (3) were determined by a single crystal X-ray diffraction method. In both complexes, the metal atom is coordinated by one pyrazole nitrogen, one pyridine nitrogen and two chlorine atoms in a distorted square-planar geometry. In complex 3, π-π stacking between pairs of molecules is observed.     

Synthesis of [SnPh2(SR)2] SR = SC6F4-4-H, SC6F5: Reactivity towards group 10 transition metal complexes

The organometallic tin(IV) complexes [SnPh₂(SR^F)₂] SR^F = ⁻SC₆F₄-4-H (1), ⁻SC₆F₅ (2), were synthesized and their reactivity with [MCl₂(PPh₃)₂] M = Ni, Pd and Pt explored. Thus, transmetallation products were obtained affording polymeric [Ni(SR^F)(μ-SR^F)]_n, monomeric cis-[Pt(PPh₃)₂(SC₆F₄-4-H)₂] (3) and cis-[Pt(PPh₃)₂(SC₆F₅)₂] (4) and dimeric species [Pd(PPh₃)(SC₆F₄-4-H)(μ-SC₆F₄-4-H)]₂ (5) and [Pd(PPh₃)(SC₆F₅)(μ-SC₆F₅)]₂ (6) for Ni, Pt and Pd, respectively. The crystal structures of complexes 1, 2, 3, 4 and 6 were determined.     

Bis(O2S2 macrocycle) complexes of palladium(II)

Two isomeric dibenzo-O₂S₂ macrocycles L¹ and L² have been synthesised and their coordination chemistry towards palladium(II) has been investigated. Two-step approaches via reactions of 1:1-type complexes, [cis-Cl₂LPd] (1a: L = L¹, 1b: L = L²), with different O₂S₂ macrocycle systems (L¹ and L²) have led to the isolation of the following bis(O₂S₂ macrocycle) palladium(II) complexes in the solid state: [Pd(L¹)₂](ClO₄)₂ (2a) and a mixture of [Pd(L¹)₂](ClO₄)₂ (2a) + [Pd(L²)₂](ClO₄)₂ (2b).     

Novel long bipyridine-type linking ligands containing an intervening naphthalene fragment: [Zn(L)(NO3)2], [Zn(L)(NO3)2], and [Cd(L)1.5(NO3)2] (L = (4-py)-CHN-C10H6-NCH-(4-py); L = (3-py)-CHN-C10H6-NCH-(3-py))

Novel bipyridine-type linking ligands L¹ ((4-py)-CHN-C₁₀H₆-NCH-(4-py)) and L² ((3-py)-CHN-C₁₀H₆-NCH-(3-py)), a pair of isomers due to possessing different pairs of terminal pyridyl groups, were prepared by the Schiff-base condensation. In ligand L¹, the N?N separation between the terminal pyridyl groups is 16.0 Å, with their nitrogen donor atoms at the para positions (4,4′). The corresponding N?N separation in ligand L² is 14.2 Å, with the nitrogen donor atoms at the meta positions (3,3′). 1-D zigzag-chain coordination polymers [Zn(L¹)(NO₃)₂] (1) and [Zn(L²)(NO₃)₂] (2) were prepared by reactions of Zn(NO₃)₂ · 6H₂O with ligands L¹ and L², respectively, by solution diffusion. Polymer 3, [Cd(L¹)_1.5(NO₃)₂], prepared from Cd(NO₃)₂ · 4H₂O and L¹, exhibits a 1-D ladder structure, whose repeating ladder unit consists of four Cd metals and four L¹ ligands to create a large 76-membered ring with dimensions of 20.8 × 20.8 Å. All products were structurally characterized by X-ray diffraction.     

1-D coordination chains of Cu(hfac)2 and Mn(hfac)2 bridged by phenyl-nitronylnitroxide derivatives

Two alternating 1-D metal-radical linear [L:Cu(hfac)₂]_n and zig-zag [L:Mn(hfac)₂]_n chains (where L = 4-trimethylsilylethynyl-1-(4,4,5,5-tetramethyl-3-oxylimidazoline-1-oxide)benzene) and hfac = hexafluoroacetylacetonate) are described and characterized by X-ray diffraction of their crystals. Bulk magnetic measurements of L:Cu(hfac)₂ indicated a ferromagnetic interaction with J = 6 cm⁻¹ and L:Mn(hfac)₂ yielded ferrimagnetic interactions with J = −95 cm⁻¹. For the latter, a strong increase of their magnetic moment at lowest temperatures was observed only at very low static magnetic field, while for H_dc > 0.05 T saturation effect led to a downward slope after reaching a maximum.     

Substitution reactions of tetrahydrofuran in [Cr(thf)3Cl3] with mono and bidentate N-donor ligands: X-ray crystal structures of [Cr(bipy)(OH2)Cl3] and [HpyNH2][Cr(bipy)Cl4]

Substitution of thf ligands in [Cr(thf)₃Cl₃] and [Cr(thf)₂(OH₂)Cl₃] was investigated. 2,2′-Bipyridine (bipy) was reacted with [Cr(thf)₃Cl₃] to form [Cr(bipy)(thf)Cl₃] (1), which was subsequently reacted with water to give [Cr(bipy)(OH₂)Cl₃] (2). Reaction of 1 with acetonitrile (CH₃CN), pyridine (py) and pyridine derivatives to form [Cr(bipy)(L)Cl₃] (L = CH₃CN 3, py 4 and 4-pyR with R = NH₂5, Bu^t6 and Ph 7). In addition, the substitution of bipy in [Cr(thf)₃Cl₃] was followed by ¹H NMR spectroscopy at room temperature, which showed completion of the reaction in ca. 100 min. Complex 2 was characterised by single crystal X-ray diffraction. The theoretical powder diffraction pattern of 2 was compared to the experimentally obtained powder X-ray diffraction pattern, and shows excellent agreement. The dimer [Cr₂(bipy)₂Cl₄(μ-Cl)₂] was cleaved asymmetrically to give the anionic complex [Cr(bipy)Cl₄]⁻ (8) and [Cr(bipy)₂Cl₂]⁺ (9). Complexes 8 and 9 were characterised by single crystal X-ray diffraction.     

Synthetic and mechanistic studies on ruthenium dicarbonyl complexes containing PhP(CH2CH2CH2PCy2)2 (Cyttp) ligand

A synthetic and mechanistic study is reported on ligand substitution and other reactions of six-coordinate ruthenium(II) carbonyl complexes containing tridentate PhP(CH₂CH₂CH₂PCy₂)₂ (Cyttp). Carbonylation of cis-mer-Ru(OSO₂CF₃)₂(CO)(Cyttp) (1) affords [cis-mer-Ru(OSO₂CF₃)(CO)₂(Cyttp)]O₃SCF₃ (2(O₃SCF₃)) and, on longer reaction times, [cis-mer-Ru(solvent)(CO)₂(Cyttp)](O₃SCF₃)₂ (solvent = acetone, THF, methanol). 2(O₃SCF₃) reacts with each of NaF, LiCl, LiBr, NaI, and LiHBEt₃ to yield [cis-mer-RuX(CO)₂(Cyttp)]⁺ (X = F (3), Cl (4), Br (5), I (6), H (7)), isolated as 3-7(BPh₄). These conversions proceed with high stereospecificity to afford only a single isomer of the product that is assigned a structure in which the Ph group of Cyttp points toward the CO trans to X (anti when X = F, Cl, Br, or I; syn when X = H). Treatment of 2(O₃SCF₃) with NaOMe and CO generates the methoxycarbonyl complex [cis-mer-Ru(CO₂Me)(CO)₂(Cyttp)]⁺ (8), whereas addition of excess n-BuLi to 2(O₃SCF₃) in THF under CO affords mer-Ru(CO)₂(Cyttp) (9). The two ¹³C isotopomers [cis-mer-Ru(OSO₂CF₃)(CO)(¹³CO)(Cyttp)]O₃SCF₃ (2′(O₃SCF₃): ¹³CO trans to P_C; 2″(O₃SCF₃): ¹³CO cis to all P donors) were synthesized by appropriate adaptations of known transformations and used in mechanistic studies of reactions with each of LiHBEt₃, NaOMe/CO, and n-BuLi. Whereas LiHBEt₃ reacts with 2′(O₃SCF₃) and 2″(O₃SCF₃) to replace triflate by hydride without any scrambling of the carbonyl ligands, the corresponding reactions of NaOMe-CO are more complex. The methoxide combines with the CO cis to triflate in 2, and the resultant methoxycarbonyl ligand ends up positioned trans to the incoming CO in 8. A mechanism is proposed for this transformation. Finally, treatment of either 2′(O₃SCF₃) or 2″(O₃SCF₃) with an excess of n-BuLi leads to the formation of the same two ruthenium(0) isomers of mer-Ru(CO)(¹³CO)(Cyttp). These products represent, to our knowledge, the first example of a syn-anti pair of isomers of a five-coordinate metal complex.     

Pyridine and phosphine reactions with [CPh3][B(C6F5)4]

Trityl borate salts [4-RPyCPh₃][B(C₆F₅)₄] (R = H 1, ^tBu 2, Et 3, NMe₂4) and [R₃PCPh₃][B(C₆F₅)₄] (R = Me 5, ⁿBu 6, Ph[1] 7, p-MeC₆H₄8) are readily prepared via equimolar reaction of the appropriate pyridine or phosphine and trityl borate [CPh₃][B(C₆F₅)₄]. The analogous reactions of PⁱPr₃ affords the product [(p-ⁱPr₃P-C₆H₄)Ph₂CH][B(C₆F₅)₄] (9) while the corresponding reactions of Cy₃P and ^tBu₃P gave the cyclohexadienyl derivatives [(p-R₃PC₆H₅)CPh₂][B(C₆F₅)₄] (R = Cy 10, ^tBu 11). X-ray structures of 5 and 9 are reported.     

Quantification of cis and trans influences in [PtX(PPh3)3] complexes. A P NMR study

In [PtX(PPh₃)₃]⁺ complexes (X = F, Cl, Br, I, AcO, NO₃, NO₂, H, Me) the mutual cis and trans influences of the PPh₃ groups can be considered constants in the first place, therefore the one bond Pt-P coupling constants of P_(cis) and P_(trans) reflect the cis and trans influences of X. The compounds [PtBr(PPh₃)₃](BF₄) (2), [PtI(PPh₃)₃](BF₄) (3), [Pt(AcO)(PPh₃)₃](BF₄) (4), [Pt(NO₃)(PPh₃)₃](BF₄) (5), and the two isomers [Pt(NO₂-O)(PPh₃)₃](BF₄) (6a) and [Pt(NO₂-N)(PPh₃)₃](BF₄) (6b) have been newly synthesised and the crystal structures of 2 and 4·CH₂Cl₂·0.25C₃H₆O have been determined. From the ¹J_PtP values of all compounds we have deduced the series: I > Br > Cl > NO₃ > ONO > F > AcO > NO₂ > H > Me (cis influence) and Me > H > NO₂ > AcO > I > ONO > Br > Cl > F > NO₃ (trans influence). These sequences are like those obtained for the (neutral) cis- and trans-[PtClX(PPh₃)₂] derivatives, showing that there is no dependence on the charge of the complexes. On the contrary, the weights of both influences, relative to those of X = Cl, were found to depend on the charge and nature of the complex.     

Hydrogen bonding: further evidence for the cause of the color change of nitrosylpentaamminechromium (III) compounds. Crystal structures of [Cr(NO)(NH3)5](PF6)2 and [Cr(NO)(NH3)5]Cl(PF6)

The crystal structures of [Cr(NO)(NH₃)₅](PF₆)₂ (red) and [Cr(NO)(NH₃)₅]Cl(PF₆) (brown) have been determined. The [Cr(NO)(NH₃)₅]²⁺(A) complex cations in these compounds have a slightly distorted octahedral geometry with a strictly linear Cr-N-O arrangement (from symmetry). The short interatomic distances (2.399 Å × 4) between the O (nitrosyl) and H (ammonia in adjacent complex cations) atoms in A(PF₆)₂ indicate the existence of hydrogen bonds, while the interatomic distances (3.258 Å × 8) between those in ACl(PF₆) are much longer, and the hydrogen bonds should be weak in spite of the presence of the smaller counter anion of chloride ion in ACl(PF₆). Comparisons of the five crystal structures of A(PF₆)₂, ACl₂, ACl(ClO₄), ACl(PF₆), and A(ClO₄)₂ have led to the conclusion that the existence of the strong hydrogen bonds gives red crystals of A(PF₆)₂, while the absence of hydrogen bonds results in the formation of green crystals of A(ClO₄)₂ (O ? H, 3.595 Å × 2). The color change of the crystals (from red to green) with the change of outer sphere anions is attributed to the change of the strength of the hydrogen bonding between the complex cations.     

O-Alkylthio- and O-alkylselenooxalate iron complexes: Structures of CpFe(CO)2ECOCO2Me and [CpFe(CO)2ECO]2

When the iron sulfide complexes (μ-S_x)[CpFe(CO)₂]₂ (x = 2, 3) are treated with O-alkyl oxalyl chlorides ROCOCOCl the complexes CpFe(CO)₂SCOCO₂R (1) [R = Me (a), Et (b)] are obtained. Similarly, the complexes CpFe(CO)₂SeCOCO₂R (2) are obtained from the analogous iron selenide (μ-Se)[CpFe(CO)₂]₂ reaction with the same reagents. Treatment of the iron selenide with half equivalent of oxalyl chloride produces the dimeric complex [CpFe(CO)₂SeCO]₂ (3). The new complexes, 1, 2 and 3, have been characterized by elemental analyses, IR and ¹H NMR spectroscopy. The solid state structures of 1a, 2a, 3 and [CpFe(CO)₂SCO]₂ (4) were determined by an X-ray crystal structure analysis.     

Syntheses and characterization of the W(II) and W(III) N2 complexes, [WCl2(PMe3)3]2N2 and [WCl3(PMe3)2]2N2

Refluxing WCl₄(PMe₃)₃ under a nitrogen atmosphere in the presence of two equivalents of sodium amalgam leads to a reduction to the W(II) complex [cis,mer-WCl₂(PMe₃)₃]₂N₂ (1), which can be converted to [mer,trans-WCl₃(PMe₃)₂]₂N₂ (2) via appropriate oxidation/chlorination. Structural data have been obtained for both complexes, and demonstrate significantly increased steric crowding in 1 due to PMe₃/PMe₃ interactions. The N-N bond distances in the two compounds are similar, at 1.279(4) and 1.243(18) Å, respectively.     

Lanthanide iodides as promoters of acetonitrile amination. Molecular structure of MeC(NH)NHPr, MeC(NH)NHBu and {Dy[MeC(NH)NEt2]6}I3

Amination of acetonitrile by the amines MeNH₂, PrⁿNH₂, PrⁱNH₂, Bu^tNH₂, and Et₂NH is efficiently promoted by the lanthanide iodides LnI₂ (Ln = Nd, Dy, Tm), LnI₃ (Ln = Pr, Nd, Dy) and LnI₃(THF)₃ (Ln = Pr, Nd, Dy). The formed mono- and N,N′-disubstituted amidines MeC(NH)NHR (R = Prⁱ, Bu^t), MeC(NH)NEt₂, MeC(NR)NHR (R = Me, Prⁿ) were isolated mainly as the complexes with starting iodide of general composition LnI₂(amidine)_x (1) or LnI₃(amidine)_x (2) (x = 3-8). In the products 1, which evidently are the mixtures of LnI²⁺, and LnI₃ derivatives, the metal exists in trivalent state but one of the ligands actually is amidinate anion. A part of the generated amidines remains in the reaction solutions in free form. Heating of the 1 and 2 in vacuum at 150-200 °C affords corresponding amidine and the complexes with reduced amount of the amidine ligands LnI₂(amidine)_y (3) or LnI₃(amidine)_y (4) (y = 2-3). The products 3 and 4 displayed the same catalytic activity in the acetonitrile-amine cross-coupling as the initial iodides. SmI₂ and especially YbI₂ revealed lower activity. The structure of isopropylacetamidine (5), tert-butylacetamidine (6) and {Dy[MeC(NH)NEt₂]₆}I₃(MeCN) (7) were determined by X-ray diffraction analysis.     

Spectral properties and bio-activity of copper(II) clofibriates, part III: crystal structure of Cu(clofibriate)2(2-pyridylmethanol)2, Cu(clofibriate)2(4-pyridylmethanol)2(H2O) dihydrate, and Cu2(clofibriate)4(N,N-diethylnicotinamide)2

New copper(II) clofibriates (clof, {2-(4-chlorophenoxy)-2-methylpropionic or 2-(4-chlorophenoxy)isobutyric acid}) of composition Cu(clof)₂L₂ (where L=2-pyridylmethanol (2-pymeth) (1), N-methylnicotinamide (Menia) (4), N,N-diethylnicotinamide (Et₂nia) (5), isonicotinamide (isonia) (7) or methyl-3-pyridylcarbamate (mpc) (8)), [Cu(clof)₂(4-pymeth)₂(H₂O)] · 2H₂O (4-pymeth=4-pyridylmethanol) (2 · 2H₂O) and Cu(clof)₂L (where L=4-pymeth (3) or Et₂nia (6)) have been prepared and spectroscopically characterized. All the Cu(clof)₂L₂ compounds seem to possess distorted octahedral copper(II) stereochemistry with differing tetragonal distortions. An X-ray analysis of 1 was carried out and it featured a tetragonal-bipyramidal geometry around the copper(II) atom. X-ray analysis of 2 · 2H₂O featured a square-pyramidal geometry around copper(II) atom. Both the Cu(clof)₂L compounds seem to consist of a binuclear unit of tetracarboxylate type bridging. An X-ray analysis of 6 revealed typical binuclear paddle-wheel type structure, consisting of two copper(II) atoms in square-pyramidal geometry bridged by four carboxylate anions in the xy-plane. All complexes under study were characterized by EPR and electronic spectroscopy. The antimicrobial effects have been tested on various strains of bacteria, yeasts and filamentous fungi.