Synthesis and structural characterisation of the lead-platinum sulfido aggregates [Pt2(μ-S)2(PPh3)4PbX2] (X = Br, I); promotion of rare tetrahedral geometry for lead(II)

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] with excess PbBr₂ or PbI₂ in methanolic suspension result in the formation of the neutral lead(II) halide adducts [Pt₂(μ-S)₂(PPh₃)₄PbX₂] (X = Br, I). The X-ray structure determination of the lead iodide adduct reveals an essentially tetrahedral lead(II) centre, which is a rare coordination geometry for lead(II), which almost invariably is hemidirected, with a stereochemically active lone pair. In contrast, the structure of the PbBr₂ adduct, although suffering from some disorder, shows a more typical, distorted arrangement of ligands; these results are discussed in terms of the tendency for soft, bulky ligands to promote symmetric, holodirected geometries. The ESI mass spectra of the adducts are reported, and yield [M−halide]⁺ ions.     

Further studies on the dialkylation chemistry of [Pt2(μ-S)2(PPh3)4] with activated alkyl halides RC(O)CH2X (X = Cl, Br)

Further studies have been carried out into the reactivity of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of activated alkylating agents of the type RC(O)CH₂X (R = organic moiety, e.g. phenyl, pyrenyl; X = Cl, Br). Alkylation of both sulfide centers is observed for PhC(O)CH₂Br, 3-(bromoacetyl)coumarin [CouC(O)CH₂Br], and 1-(bromoacetyl)pyrene [PyrC(O)CH₂Br], giving dications [Pt₂{μ-SCH₂C(O)R}₂(PPh₃)₄]²⁺, isolated as their PF₆⁻ salts. The X-ray structure of [Pt₂{μ-SCH₂C(O)Ph}₂(PPh₃)₄](PF₆)₂ shows the presence of short Pt?O contacts. In contrast, the corresponding chloro compounds [typified by PhC(O)CH₂Cl] and imino analogues [e.g. PhC(NOH)CH₂Br] do not dialkylate [Pt₂(μ-S)₂(PPh₃)₄]. The ability of PhC(O)CH₂Br to dialkylate [Pt₂(μ-S)₂(PPh₃)₄] allows the synthesis of new mixed-alkyl dithiolate derivatives of the type [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₄]²⁺ (R = Et or n-Bu), through alkylation of in situ-generated monoalkylated compounds [Pt₂(μ-S)(μ-SR)(PPh₃)₄]⁺ (from [Pt₂(μ-S)₂(PPh₃)₄] and excess RBr). In these heterodialkylated systems ligand replacement of PPh₃ occurs by the bromide ions in the reaction mixture forming monocations [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₃Br]⁺. This ligand substitution can be easily suppressed by addition of PPh₃ to the reaction mixture. The complex [Pt₂{μ-SCH₂C(O)Ph}(μ-SBu)(PPh₃)₄]²⁺ was crystallographically characterized. X-ray crystal structures of the bromide-containing complexes [Pt₂{μ-SCH₂C(O)Ph}(μ-SR)(PPh₃)₃Br]⁺ (R = Et, Bu) are also reported. In both structures the coordinated bromide is trans to the SCH₂C(O)Ph ligand, which adopts an axial position, while the ethyl and butyl substituents adopt equatorial positions, in contrast to the structures of the dialkylated complexes [Pt₂{μ-SCH₂C(O)Ph}₂(PPh₃)₄]²⁺ and [Pt₂{μ-SCH₂C(O)Ph}(μ-SBu)(PPh₃)₄]²⁺ (and many other known analogues) where both alkyl groups adopt axial positions.     

Synthesis of (β-phenylethynyl)-gem-diphenyltrifluorocyclotriphosphazene and its reaction with RCpCo(PPh3)2 [R = MeOC(O)]

Reaction of gem-diphenyltetrafluorocyclotriphosphazene with in situ generated lithiated phenylacetylene resulted in the formation of the first example of a gem-diphenyltrifluorophosphazene based alkyne (β-phenylethynyl)-gem-diphenyltrifluorocyclotriphosphazene (NPPh₂)(NPF₂)[NP(F)CCPh] 1. Reaction of this alkyne with η⁵-(MeOC(O)C₅H₄)Co(PPh₃)₂ resulted in the formation of a CpCo stabilized cyclobutadiene complex [η⁵-carbomethoxycyclopentadienyl][η⁴-1,3-bis(gem-diphenyltrifluorocyclotriphosphazenyl)-2,4-diphenylcyclobutadiene]cobalt 2, having two gem-diphenyltrifluorophosphazene moieties trans to each other on the cyclobutadiene ring. The reaction also yielded two structural isomers of the PPh₃ stabilized cobaltacyclopentadiene compounds 3 and 4 having gem diphenyl trifluorophosphazene moieties present in the 2,4 and 2,5 positions of the metallacycle. The reaction in addition yielded a novel spirocyclic phosphazacyclopentadiene compound bound to a CpCo unit in the η⁴-mode 5. All the compounds were characterized by ¹H, ¹³C, ³¹P and ¹⁹F NMR spectroscopy and compounds 2, 3 and 5 were also structurally characterized by X-ray crystallography.     

Theoretical studies of the spectroscopic properties of (L)Pt [(1,2-η)-Ph-(CC)n-Ph] (L = dppp or (PPh3)2, n = 1 or 2)

Electronic structures and spectroscopic properties of (L)Pt[(1,2-η²)-Ph-(CC)_n-Ph] (n = 1, L = (PPh₃)₂ (1), n = 1, L = dppp (2), and n = 2, L = (PPh₃)₂ (3)) are studied by the ab initio and DFT methods, respectively. The ground- and excited-state structures are optimized by the B3LYP and CIS methods, respectively. The calculated bond lengths and bond angles in the ground-state agree well with the corresponding experimental values and the structures in the ground and excited-states have only slightly change. At the TD-DFT level with the PCM model, the absorption and emission spectra in solution are obtained. The lowest-energy absorptions of 1-3 are attributed to the mixing MLCT/ILCT transitions and phosphorescent emissions are attributed to coming from the combination of ³MLCT/³ILCT transitions. Furthermore, the lowest-energy absorptions and emissions of 1-3 are red-shifted in the order 1 < 2 < 3. It is shown that with the increase of the π-conjugated effect of alkyne or electron-donating ability of the phosphane atom, lowest-energy emission energy for 1-3 is correspondingly decreased.     

Synthesis and NMR characterization of the novel mixed-ligands Pt(II) complexes Pt(amine)(pyrimidine)X2 and trans,trans-X2(amine)Pt(μ-pyrimidine)Pt(amine)X2 (X = I and Cl)

Mixed-ligand complexes of the type Pt(amine)(pm)I₂, (pm = pyrimidine) were synthesized and characterized by IR spectroscopy and by multinuclear (¹⁹⁵Pt, ¹H and ¹³C) magnetic resonance spectroscopy. The cis compounds were prepared from the reaction of I(amine)Pt(μ-I)₂Pt(amine)I with pyrimidine (1:2 proportion) in water, while the trans isomers were synthesized from the isomerization of the cis complexes in acetone. The cis isomers could not be isolated with several amines, especially the more bulky ones. In ¹H NMR, the pyrimidine protons of the cis compounds were found at lower fields than those of the trans analogs and the J(¹⁹⁵Pt-¹H) coupling constants are slightly larger in the cis geometry. For n-butylamine, the reaction produced also I₂(n-butylamine)Pt(μ-pm)Pt(n-butylamine)I₂. No such dimer could be isolated with the other amines. The compounds Pt(amine)(pm)Cl₂ were also prepared (amine = methylamine and t-butylamine) from the ionic complex K[Pt(amine)Cl₃] using an excess of pyrimidine. The IR and NMR characterization showed that the methylamine compound was a cis-trans mixture, while only the trans isomer was isolated with t-butylamine. When the same reaction was performed using a Pt:pm ratio of 2:1, Cl₂(amine)Pt(μ-pm)Pt(amine)Cl₂ was isolated. The pyrimidine-bridged dimers were identified by IR and multinuclear magnetic resonance spectroscopies as the trans-trans isomers. The trans monomers and dimers showed only one ν(Pt-Cl) band. The ¹⁹⁵Pt NMR signals of the dimers were found close to those of the monomer trans-Pt(amine)(pm)Cl₂.     

Crystal and molecular structures of {Cu(μ-CCPh)(triphos)}2 [triphos = (PPh2CH2)3CMe]

The binuclear complex {Cu(μ-CCPh)(triphos)}₂ [triphos = (PPh₂CH₂)₃CMe] has been obtained from a reaction between {Cu(CCPh)}_n and triphos. The two copper atoms are bridged unsymmetrically by two CCPh groups, each attached through one carbon only [Cu-C, 2.016(4) Å], the separation between the two coppers being 2.4663(8) Å. Only two of the three phosphorus atoms in each ligand are coordinated to copper [Cu-P(1,2) 2.281, 2.273(1) Å]. The observed structure may be rationalised using a recent theoretical study [C. Mealli, S.S.M.C. Godinho, M.J. Calhorda, Organometallics 20 (2001) 1734] and differs from that assumed for the rationalisation of its luminescence properties [V. Pawlowski, G. Knör, C. Lennartz, A. Vogler, Eur. J. Inorg. Chem. (2005) 3167].     

Metal-sulfur dπ-pπ buffering of the oxidations of metal-thiolate complexes: Photoelectron spectroscopy of (η-C5H5)Fe(CO)2SR (SR = SCH3, SBu) and (η-C5H5)Re(NO)(PR3)SCH3 (PR3 = PPr3, PPh3)

The metal-sulfur bonding present in the transition metal-thiolate complexes CpFe(CO)₂SCH₃, CpFe(CO)₂S^tBu, CpRe(NO)(PⁱPr₃)SCH₃, and CpRe(NO)(PPh₃)SCH₃ (Cp = η⁵-C₅H₅) is investigated via gas-phase valence photoelectron spectroscopy. For all four complexes a strong dπ-pπ interaction exists between a filled predominantly metal d orbital of the [CpML₂]⁺ fragment and the purely sulfur 3pπ lone pair of the thiolate. This interaction results in the highest occupied molecular orbital having substantial M-S π^∗ antibonding character. In the case of CpFe(CO)₂SCH₃, the first (lowest energy) ionization is from the Fe-S π^∗ orbital, the next two ionizations are from predominantly metal d orbitals, and the fourth ionization is from the Fe-S π orbital. The pure sulfur pπ lone pair of the thiolate fragment is less stable than the filled metal d orbitals of the [CpFe(CO)₂]⁺ fragment, resulting in a Fe-S π^∗ combination that is higher in sulfur character than the Fe-S π combination. Interestingly, substitution of a tert-butyl group for the methyl group on the thiolate causes little shift in the first ionization, in contrast to the shift observed for related thiols. This is a consequence of the delocalization and electronic buffering provided by the Fe-S dπ-pπ interaction. For CpRe(NO)(PⁱPr₃)SCH₃ and CpRe(NO)(PPh₃)SCH₃, the strong acceptor ability of the nitrosyl ligand rotates the metal orbitals for optimum backbonding to the nitrosyl, and the thiolate rotates along with these orbitals to a different preferred orientation from that of the Fe complexes. The initial ionization is again the M-S π^∗ combination with mostly sulfur character, but now has considerable mixing among several of the valence orbitals. Because of the high sulfur character in the HOMO, ligand substitution on the metal also has a small effect on the ionization energy in comparison to the shifts observed for similar substitutions in other molecules. These experiments show that, contrary to the traditional interpretation of oxidation of metal complexes, removal of an electron from these metal-thiolate complexes is not well represented by an increase in the formal oxidation state of the metal, nor by simple oxidation of the sulfur, but instead is a variable mix of metal and sulfur content in the highest occupied orbital.     

Dithiolate and diselenolate complexes [Pt2(μ-ECH2CHCHCH2E)(PPh3)4] (E = S, Se): Synthesis, characterisation and mass spectrometric formation of the dichalcogenide species [Pt2(μ-E2)(PPh3)4]

The reactions of [Pt₂(μ-E)₂(PPh₃)₄] (E = S, Se) with cis-1,4-dichlorobut-2-ene (cis-ClCH₂CHCHCH₂Cl) give the dichalcogenolate complexes [Pt₂(μ-ECH₂CHCHCH₂E)(PPh₃)₄]²⁺; an X-ray structure determination on the thiolate complex was carried out. The complexes give the expected dications in ESI mass spectra recorded at very low cone voltages, but at moderate cone voltages undergo facile fragmentation via a retro-Diels-Alder reaction and loss of 1,3-butadiene, giving the dichalcogenide species [Pt₂(μ-E₂)(PPh₃)₄]²⁺. Analogous species containing bidentate phosphine or arsine ligands have been previously generated electrochemically, and studied theoretically.     

A novel tetranuclear hydrogenphosphate-bridged Cu(II) cluster. Synthesis, structure, spectroscopy and magnetism of [Cu4(dpyam)4(μ4,η-HPO4)2(μ-X)2]X2(H2O)6 (X = Cl, Br)

Two novel tetranuclear compounds with an unprecedented mode of a hydrogenphosphato bridge, [Cu₄(dpyam)₄(μ₄,η³-HPO₄)₂(μ-X)₂]²⁺ (in which dpyam = di-2-pyridylamine and X = Cl (1), Br (2)) have been synthesised and characterised structurally and magnetically. The Cu(II) ions in the structures each display a square-pyramidal geometry, with two tridentate hydrogenphosphato groups bridging four copper atoms in a μ₄,η³ coordination mode which is rarely found in hydrogenphosphate metal compounds. Each (different) pair of Cu(II) ions is additionally bridged by halide ions, with relatively long Cu-X distances (2.551(3)-2.604(3) Å for 1 and 2.707(1)-2.766(2) Å for 2) and subsequently also a small Cu-X-Cu angle (65.7(1)° and 65.1(1)° for 1 and 61.6(1)° and 62.4(1) for 2) and a large Cu-X-Cu angle (95.5(1)° and 96.5(1)° for 1 and 91.1(1)° and 92.6(1)° for 2). Cu?Cu distances in the tetranuclear units varies from 2.802(3) to 5.232(3) Å for 1 and from 2.834(1) to5.233(1) Å in 2. The lattice structures are stabilised by extensive intermolecular hydrogen bonds. The magnetic susceptibility measurements down to 5 K revealed a weak ferromagnetic interaction between the outer pairs of Cu(II) ions which vary from 22 to 46 cm⁻¹ in 1 and 12 to 33 cm⁻¹ in 2 and a moderately strong antiferromagnetic interaction between the inner Cu(II) ions of −79 cm⁻¹ in 1 and −83 cm⁻¹ in 2, via the Cu-O-P-O-Cu pathway.     

Sulfide-bridged aggregates from the metalloligand [Pt2(μ-S)2(PPh3)4] and β-diketonate complexes of cobalt(II) and zinc(II)

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a range of zinc(II) and cobalt(II) complexes ML₂, where L is a β-diketonate ligand CH₃COCHCOCH₃, PhCOCHCOPh, CF₃COCHCOTh (Th = 2-thienyl)] permits the synthesis of adducts [Pt₂(μ-S)₂(PPh₃)₄M(diketonate)]⁺, isolated as their salts in moderate yields. The cobalt and zinc acetylacetonate complexes were characterised by single-crystal X-ray diffraction studies, which reveal isomorphous structures, with tetrahedral heterometal centres.     

Studies on Zn(II) and Cd(II) heteroligand complexes with RC(S)NHP(O)(OiPr)2 (R = Ph, NH2, PhNH) and α-diimine (bpy and phen) ligands. C-Cl bond cleavage of CH2Cl2 by [Zn(phen){PhC(S)NP(O)(OiPr)2}2]

The reaction of [ZnL^I,II₂] (L^I = [NH₂C(S)NP(O)(OiPr)₂]⁻; L^II = [PhNHC(S)NP(O)(OiPr)₂]⁻) or [Cd₂L^IV₄] (L^IV = [PhC(S)NP(O)(OiPr)₂]⁻) with 2,2′-bipyridine (bpy) or 1,10-phenanthroline (phen) leads to the heteroligand complexes [Zn(bpy)L^I,II₂], [Zn(phen)L^I,II₂], [Cd(bpy)L^IV₂] or [Cd(phen)L^IV₂], respectively. The introduction of the diimine ligands into the coordination sphere of the metal cation provokes a change from 1,5-O,S- to 1,3-N,S-coordination of the anionic ligands for Zn but not for the Cd species. The reaction of [Zn(phen)L^IV₂] (L^IV = PhC(S)NP(O)(OiPr)₂⁻) with CH₂Cl₂ cleaves the chlorine atoms from CH₂Cl₂ and leads to the formation of [Zn(phen)L^IVCl] and S,S′-bis(benzimidothio-N-diisopropoxyphosphoryl)methane (L^IV-CH₂-L^IV) in high yields. Using CHCl₃ or CCl₄ instead of CH₂Cl₂ does not lead to the formation of chlorine substituted products even under reflux conditions. The new compounds were investigated by ¹H and ³¹P{¹H} NMR, IR spectroscopy and microanalysis. Crystal structures of [ZnL^II₂], [Cd(phen)L^IV₂]·CH₂Cl₂, [Zn(bpy)L^I₂] and [Zn(phen)L^IVCl] were elucidated by X-ray diffraction.     

Synthesis and electrochemical aspects of group 14 iron complexes of the type (η-C5H5)Fe(L)2ER3, L2 = (CO)2, (Ph2P)2CH2; E = C, Si, Ge, Sn

The dicarbonyl and diphosphine complexes of the type (η⁵-C₅H₅)Fe(L)₂ER₃ (L₂ = (CO)₂ (a), (Ph₂P)₂CH₂ (b); ER₃ = CH₃ (1a/b); SiMe₃ (2a/b), GeMe₃ (3a/b), SnMe₃ (4a/b)) were synthesized and studied electrochemically. Cyclic voltammetric studies on the dicarbonyl complexes 1a-4a revealed one electron irreversible oxidation processes whereas the same processes for the chelating phosphine series 1b-4b were reversible. The E_ox values found for the series 1a-4a were in the narrow range 1.3-1.5 V and in the order Si > Sn ≈ Ge > C; those for 1b-4b (involving replacement of the excellent retrodative π-accepting CO ligands by the superior σ-donor and poorer π-accepting phosphines) have much lower oxidation potentials in the sequence Sn > Si ≈ Ge > C. This latter oxidation potential pattern relates directly to the solution ³¹P NMR chemical shift data illustrating that stronger donation lowers the E_ox for the complexes; however, simple understanding of the trend must await the results of a current DFT analysis of the systems.     

Low temperature matrix photochemistry of M2(CO)4(μ-S-t-Bu)2 and [M(CO)2Cl2] anions, where M = Rh and Ir

Photolysis of M₂(CO)₄(μ-S-t-Bu)₂, where M = Rh or Ir, in Nujol matrices at ca. 90 K results in simple CO loss to form a tricarbonyl intermediate analogous to that observed for Rh₂(CO)₄(μ-Cl)₂. Photolysis of the anions, [M(CO)₂Cl₂]¹⁻, where M = Rh or Ir, in inert ionic matrices at ca. 90 K, results in CO-loss to form an intermediate analogous to that formed by Rh(CO)₂(i-Pr₂HN)Cl. Finally, photolysis of trans-Ir(CO)(PMe₃)₂Cl in a Nujol matrix at ca. 90 K gives rise to a new species whose carbonyl band is shifted slightly down in energy as has been observed for trans-Rh(CO)(PMe₃)₂Cl. In all cases the iridium compounds behave similarly to the rhodium species although the photon energy for iridium photochemistry is typically above that of the rhodium compounds.     

Synthesis, crystal structures, and spectroscopic characterization of the neutral monomeric tetrahedral [M(Diap)2(OAc)2] · H2O complexes (M = Zn,Cd; Diap = 1,3-diazepane-2-thione; OAc = acetate) with N-H?O and O-H?O intra- and intermolecular hydrogen bonding interactions

The title complexes, [M(Diap)₂(OAc)₂] · H₂O (M = Zn,Cd; Diap = 1,3-diazepane-2-thione; OAc = acetate) with an MO₂S₂ configuration, have been characterized by X-ray crystallography as well as FT-IR, ¹H and ¹³C NMR spectroscopy. In these complexes, the metal atoms lie in a pseudo-tetrahedral environment and are coordinated by the thione sulfur atoms of two neutral 1,3-diazepane-2-thione ligands and one oxygen atom from each of two monodentate acetate anions. In both complexes, there are two intramolecular N-H?O hydrogen bonds, each being between one NH group of a Diap ligand and the uncoordinated O atom of an OAc ligand. The water molecule is also involved in hydrogen bonds, as an acceptor and as a donor twice, linking together three symmetry-related complexes. The Cd complex undergoes a structural phase transition from a monoclinic form at 150 K with Z′ = 2 to a smaller monoclinic cell at room temperature with Z′ = 1 without loss of crystallinity. The Zn complex does not exhibit an equivalent phase transition, and at 150 K is isostructural with the room-temperature form of the Cd complex. All three crystallographically independent molecules found for the Cd complex (two at low temperature and one at room temperature) have essentially the same structure except for small changes in the conformations of the ligands. Tetrahedral coordination with monodentate carboxylate ligands is common for Zn complexes of this kind, but is unusual for Cd complexes, and is the result of the bulky Diap ligands.     

Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

Syntheses and structural analyses of chiral rhenium containing amines of the formula (η-C5H5)Re(NO)(PPh3)((CH2)nNRR′) (n = 0, 1)

The reaction of the racemic chiral methyl complex (η⁵-C₅H₅)Re(NO)(PPh₃)(CH₃) (1) with CF₃SO₃H and then NH₂CH₂C₆H₅ gives [(η⁵-C₅H₅)Re(NO)(PPh₃)(NH₂CH₂C₆H₅)]⁺ ([4a-H]⁺; 73%), and deprotonation with t-BuOK affords the amido complex (η⁵-C₅H₅)Re(NO)(PPh₃)(NHCH₂C₆H₅) (76%). Reactions of 1 with Ph₃C⁺ X⁻ and then primary or secondary amines give [(η⁵-C₅H₅)Re(NO)(PPh₃)(CH₂NHRR′)]⁺ X⁻ ([6-H]⁺ X⁻; R/R′/X = a, H/NH₂CH₂C₆H₅/BF₄; a′, H/NH₂CH₂C₆H₅/PF₆; b, H/NH₂CH₂(CH₂)₂CH₃/PF₆; c, H/(S)-NH₂CH(CH₃)C₆H₅/BF₄); d, CH₂CH₃/CH₂CH₃/PF₆; e, CH₂(CH₂)₂CH₃/CH₂(CH₂)₂CH₃/PF₆; f, CH₂C₆H₅/CH₂C₆H₅/PF₆; g, -CH₂(CH₂)₂CH₂-/PF₆; h, -CH₂(CH₂)₃CH₂-/PF₆; i, CH₃/CH₂CH₂OH/PF₆ (62-99%). Deprotonations with t-BuOK afford the amines (η⁵-C₅H₅)Re(NO)(PPh₃)(CH₂NRR′) (6a-i; 99-40%), which are more stable and isolated in analytically pure form when R ≠ H. Enantiopure 1 is used to prepare (R_ReS_C)-[6c-H]⁺, (R_ReS_C)-6c, (S)-[6g-H]⁺, and (S)-6g. The crystal structures of [4a-H]⁺, a previously prepared NH₂CH₂Si(CH₃)₃ analog, [6a′,d,f,h-H]⁺, (R_ReS_C)-6c, and 6f are determined and analyzed in detail, particularly with respect to cation/anion hydrogen bonding and conformation. In contrast to analogous rhenium containing phosphines, 6a-i show poor activities in reactions that are catalyzed by organic amines.     

Oxidative nuclease activity of ferromagnetically coupled μ-hydroxo-μ-propionato copper(II) complexes [Cu3(L)2(μ-OH)2(μ-propionato)2] (L = N-(pyrid-2-ylmethyl)R-sulfonamidato, R = benzene, toluene, naphthalene)

Three doubly-bridged, trinuclear copper(II) compounds with hydroxo and carboxylato bridges, ^∞₁[Cu₃(L1)₂(μ-OH)₂(μ-propionato)₂](1), [Cu₃(L2)₂(μ-OH)₂(μ-propionato)₂(DMF)₂] (2) and ^∞₁{[Cu₃(L3)₂(μ-OH)₂(μ-propionato)₂]} [Cu₃(L3)₂(μ-OH)₂(μ-propionato)₂(DMF)₂]} (3) [HL1 = N-(pyrid-2-ylmethyl)benzenesulfonylamide, HL2 = N-(pyrid-2-ylmethyl)toluenesulfonylamide, HL3 = N-(pyrid-2-ylmethyl)naphthalenesulfonylamide], have been synthesized and characterized. 1 is built from [Cu₃(L1)₂(μ-OH)₂(μ-propionato)₂] clusters. Each unit contains three copper(II) with two different coordination environments: the terminal centers are square-base pyramidal whereas the central copper is square planar. 2 presents a similar square-base pyramidal geometry in the terminal centers, but the central copper is six-coordinate. 3 shows an unusual 1D coordination polymer comprised of two distinct building blocks: one similar to that found in 1 and the other similar to that found in 2. The magnetic susceptibility measurements (2-300 K) reveal a ferromagnetic interaction between the Cu(II) ions with J values of 76.0, 55.0, and 48.0 cm⁻¹ for 1, 2, and 3, respectively. Emission spectroscopy, thermal denaturation, viscosimetry and cyclic voltammetry show an interaction of the complexes with DNA through the sugar-phosphate backbone. All three Cu(II) complexes were found to be very efficient agents of plasmid DNA cleavage in the presence of ascorbato or mercaptopropionic acid. Both the kinetics and the mechanism of the cleavage reaction have also been examined.     

Reactions of the pentamethylcyclopentadienyl trisulfido tungsten with M′Cl2 (M′ = Zn, Cd, Hg): Isolation and structural characterization of [PPh4][(η-C5Me5)WS3(ZnCl2)] and [{(η-C5Me5)WS3}2Hg]

Reactions of [PPh₄][(η⁵-C₅Me₅)WS₃] with equimolar M′Cl₂ (M′ = Zn, Cd) in MeCN or 0.5 equiv. of HgCl₂ in DMF afforded two binuclear clusters [PPh₄][(η⁵-C₅Me₅)WS₃(M′Cl₂)] (1: M′ = Zn; 2: M′ = Cd) and one trinuclear cluster [{(η⁵-C₅Me₅)WS₃}₂Hg] (3). Compounds 1-3 were characterized by elemental analysis, IR, UV-Vis, ¹H NMR and X-ray crystallography. Compound 1 may be viewed as a 1:1 composite of [PPh₄][(η⁵-C₅Me₅)WS₃] and ZnCl₂, in which one [(η⁵-C₅Me₅)WS₃]⁻ anion binds a ZnCl₂ moiety via two μ-S atoms. In the structure of 3, two [(η⁵-C₅Me₅)WS₃]⁻ anions coordinate the central Hg atom via two μ-S atoms, forming an unique bent linear structure. In addition, internal redox reactions of [PPh₄][(η⁵-C₅Me₅)WS₃] under the presence of M′Cl₂ (M′ = Zn, Cd, Hg) in high concentrations were discussed.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

Succinate bridged dimeric Cu(II) system containing sandwiched non-coordinating succinate dianion: Crystal structure, spectroscopic and thermal studies of [(phen)2Cu(μ-L)Cu(phen)2]L · 12.5H2O (H2L = succinic acid; phen = 1,10-phenanthroline)

A mixed ligand and dimeric Cu^II complex [(phen)₂Cu(μ-L)Cu(phen)₂]L · 12.5H₂O (H₂L = succinic acid) containing bridging succinate moiety and also non-coordinated succinate dianion was prepared from polymeric Cu(II) succinate by nucleophilic reaction with o-phenanthroline (phen) followed by depolymerization. The dimeric product was characterized by crystallographic, spectroscopic and thermoanalytical studies. The complex crystallizes in triclinic crystal system and is composed of succinate bridged [(phen)₂Cu(μ-L)Cu(phen)₂]²⁺ complex cations, non-coordinated succinate anions and hydrogen bonded water molecules. Within the dimeric cationic unit, each of the Cu atoms is octahedrally coordinated by four N atoms of both phen ligands and both O atoms of a carboxylate moiety of the bridging succinate group in chelating form. Through intermolecular π-π stacking interactions, the complex cations form positively charged 2-D layers, between which the non-coordinating succinate anions and water molecules are sandwiched. Both the electronic and EPR studies indicate that the dimeric complex undergoes partial dissociation in solution state to exist in two structural forms. The kinetic and thermodynamic parameters involved in three stage thermal decompositions of the dimeric complex could also be evaluated using Coats-Redfern method.