Synthesis, characterization and structural diversity of lanthanide chlorides supported by the β-diketiminate ligand [{(2,6-Me2C6H3)NC(Me)}2CH]

Reactions of the β-diketiminate lithium salt L²Li [L²={(2,6-Me₂C₆H₃)NC(Me)}₂CH] with anhydrous LnCl₃ (Ln=Yb, Sm, Nd) in 1:1 molar ratio in THF afforded the new β-diketiminate lanthanide complexes L²LnCl(THF)(μ-Cl)₂Li(THF)₂ (Ln=Yb (1), Sm (2), Nd (3)). Recrystallization of complexes 1-3 from toluene gave the neutral complexes L²LnCl₂(THF)₂ (Ln=Yb (4), Sm (5), Nd (6)). Recrystallization of complexes 4 and 5 in hot toluene for two times gave the dinuclear complexes L²ClLn(μ-Cl)₃LnL²(THF) (Ln=Yb (7), Sm (8)). Treatment of the mother liquor of complex 2 in hot toluene for three times gave the novel trinuclear complex L²SmCl(μ-Cl)₃SmL²(μ-Cl)Li(L²H)(THF) (9). Each of these complexes was well characterized, while complexes 3, 7 and 9 have been characterized by X-ray diffraction structure determination.     

Examining the impact of steric and electronic variation in N2S scorpionate ligands on the properties of zinc(II) and cadmium(II) complexes

A series of LZn(II)Br (1-4) and LCd(II)Cl complexes (9-11) has been prepared by the reaction of metal halide precursors with the lithium salts of the N₂S⁻ ligands bis(3,5-diisopropylpyrazol-1-yl)dithioacetate (L¹), bis(3,5-di-tert-butylpyrazol-1-yl)dithioacetate (L²), N-phenyl-2,2-bis(3,5-diisopropylpyrazol-1-yl)thioacetamide (L³) and N-phenyl-2,2-bis(3,5-di-tert-butylpyrazol-1-yl)thioacetamide (L⁴). Characterization by X-ray crystallography and DOSY NMR studies indicate that LZnBr complexes 1-4 are mononuclear both in the solid state and in solution. Steric differences between ligands L¹-L⁴ result in distortion from an ideal tetrahedral geometry for each complex, with the degree of distortion depending on the bulk of the ligand substituents. In contrast, the related complex L³CdCl was shown by X-ray crystallography to dimerize in the solid state to form the chloride-bridged five-coordinate complex [L³CdCl]₂ (10). Despite 10 having a dinuclear structure in the solid state, DOSY NMR studies indicate 9-11 exist as mononuclear LCdCl species in solution. In addition, Zn(II) cyanide complexes of the form LZnCN [L = L¹ (5), L³ (7), L⁴ (8)] have been characterized and the X-ray structure of 8 determined. Moreover, density functional theory calculations have been conducted which yield important insight into the bonding in 1-4 and 5-8 and the electronic impact of ligands L¹-L⁴ on the zinc(II) ion and its ability to function as a Lewis acid catalyst.     

Copper(II) complexes with monocarboxylate ligands bearing different substituent groups: Synthesis and spectroscopic studies

In our continuing efforts to explore the effects of substituent groups of ligands in the formation of supramolecular coordination structures, seven new Cu^II complexes formulated as [Cu₂(L¹)₄(DMF)₂] (1), {[Cu₂(L¹)₄(Hmta)](H₂O)_0.75}_∞ (2), [Cu₂(L²)₄(2,2′-bipy)₂] (3), [Cu₂(L³)₄(H₂O)₂] (4), [Cu₂(L³)₄(Hmta)]_∞ (5), [Cu₂(L³)₄(Dabco)]_∞ (6) and [Cu₂(L³)₄(Pz)]_∞ (7) with three monocarboxylate ligands bearing different substituent groups HL¹-HL³ (HL¹ = phenanthrene-9-carboxylic acid, HL² = 2-phenylquinoline-4-carboxylic acid, HL³ = adamantane-1-carboxylic acid, Hmta = hexamethylenetetramine, 2,2′-bipy = 2,2′-bipyridine, Dabco = 1,4-diazabicyclo[2.2.2] octane and Pz = pyrazine), have been prepared and characterized by X-ray diffraction. In 1, 2 and 4-7, each Cu^II ion is octahedrally coordinated, and carboxylate acid acts as a syn-syn bridging bidentate ligand. While each Cu^II ion in 3 is penta-coordinated in a distorted square-pyramidal geometry. 1 and 4 both show a dinuclear paddle-wheel block, while 2, 5, 6 and 7 all exhibit an alternated 1D chain structure between dinuclear paddle-wheel units of the tetracarboxylate type Cu₂-(RCO₂)₄ and the bridging auxiliary ligands Hmta, Dabco and Pz. Furthermore, 3 has a carboxylic unidentate and μ_1,1-oxo bridging dinuclear structure with the chelating auxiliary ligand 2,2′-bipy. Moreover, complexes 1-6 were characterized by electron paramagnetic resonance (EPR) spectroscopy.     

Carbonylmolybdenum complexes with di(imino)pyridine and related ligands: Reduction of a di(imino)pyridine to an aminoiminopyridine system under mild conditions

The reactions of [Mo(CO)₆] towards a 2,6-di(imino)pyridine L¹ and related ligands were studied. The reaction with L¹ afforded two new complexes, [Mo(CO)₄L¹] (1) and [Mo(CO)₄L²] (2), where L² is the 2-amino-6-iminopyridine ligand arising from the hydrogenation of one imine function of L¹; similar reaction with a 2-acetyl-6-iminopyridine ligand L³ afforded [Mo(CO)₄L³] (3). Compounds 1, 2 and 3 have been fully characterised by IR, ¹H NMR and X-ray crystallography; they present a metal ion in a pseudo-octahedral environment, the three organic ligands acting with bidentate N₂ coordination modes. One of the imine functions in 1, the amine function in 2, and the ketone function in 3 are uncoordinated.     

Synthesis and structures of zinc complexes with new binucleating ligands containing alkoxide bridges, and their activities in the hydrolysis of tris(p-nitrophenyl)phosphate

Four new binucleating ligands featuring a hydroxytrimethylene linker between two coordination sites (1,3-bis{N-[3-(dimethylamino)propyl]-N-methylamino}propan-2-ol, HL¹; 1,3-bis{N-[2-(dimethylamino)ethyl]-N-methylamino}propan-2-ol, HL²; 1,3-bis[bis(2-methoxyethyl)amino]propan-2-ol, HL³; and 1-bis[(2-methoxyethyl)amino]-3-{N-[2-(dimethylamino)ethyl]-N-methylamino}propan-2-ol, HL⁴) were synthesized, along with the corresponding zinc complexes. The structures of three dinuclear zinc complexes ([Zn₂L¹(μ-CH₃COO)₂]BPh₄ (1), [Zn₂L³(μ-CH₃COO)₂]BPh₄ (3), and [Zn₂L⁴(μ-CH₃COO)(CH₃COO)(EtOH)]BPh₄ (4)) and a tetranuclear zinc complex ({[Zn₂L²(μ-CH₃COO)]₂(μ-OH)₂}(BPh₄)₂ (2)) were revealed by X-ray crystallography. Hydrolysis of tris(p-nitrophenyl)phosphate (TNP) by these zinc complexes in an acetonitrile solution containing 5% Tris buffer (pH 8.0) at 30 °C was investigated spectrophotometrically and by ³¹P NMR. Although zinc complexes 1, 3, and 4 did not show hydrolysis activity, the tetranuclear zinc complex 2, containing μ-hydroxo bridges, was capable of hydrolyzing TNP. This suggests that the hydroxide moiety in the complex may have an important role in the hydrolysis reaction.     

Syntheses and molecular structures of Co-Na and Co-K coordination polymers constructed using mono- and bis-chelated cobalt(III) complexes of bis(2-pyridylcarbonyl)amide ion

Four new hetero-bimetallic Co³⁺-Na⁺ and Co³⁺-K⁺ coordination polymers having the molecular formulae [Na(H₂O)Co(L)(N₃)₃]_n (1), [Na₂Co(L)(N₃)₃(H₂O)₅][Co(L)(N₃)₃] (2), K[Co(L)(NCS)₃]·H₂O (3) and K[Co(L)₂][Co(NCS)₄]·0.5H₂O (4), were synthesized. Compounds 1-4 were characterized by single crystal X-ray diffraction, IR, UV-Vis, and thermogravimetric methods. These bimetallic systems have EE, EO azide bridge (1, 2) as well as bent (1, 2, 3) and linear (1, 4) aquo bridges. Important features observed among them were: a Z-shaped and diamond-shaped Co₂Na₂ clusters in 1, a centrosymmetric double ladder like polymer based on Na₄ cluster in 2, and a linear KOK core having paddle-wheel structure in 4.     

Mo- and W-N2 and -CO complexes with novel mixed P/N ligands: Structural properties and implications to synthetic nitrogen fixation

Four new ligands containing a pyridine or thiazole group and one or more N-(diphenylphosphinomethyl)amine functions have been prepared and employed for the synthesis of Mo(0) and W(0) carbonyl and dinitrogen complexes. For comparison coordination of the literature-known ligand N,N-bis(diphenylphosphinomethyl)-methylamine (PNP, 1) to such systems has been investigated as well. Two new ligands are N,N-bis(diphenylphosphinomethyl)-2-aminopyridine (pyNP₂, 2) and N,N′-bis(diphenylphosphinomethyl)-2,6-diaminopyridine (PpyP, 3). In a third new ligand, N-diphenylphosphinomethyl-2-aminothiazole (thiazNP, 4), the pyridine group is replaced by thiazol. Finally, the pentadentate ligand N,N,N′,N′-tetrakis(diphenylphosphinomethyl)-2,6-diaminopyridine (pyN₂P₄, 5) has been synthesized. Coordination of ligands 2, 3 and 4 to low-valent metal centers is investigated on the basis of the three molybdenum carbonyl complexes [Mo(CO)₃(NCCH₃)(pyNP₂)] (6), [Mo(CO)₄(PpyP)] (7) and [Mo(CO)₄(thiazNP)] (8), respectively, all of which are structurally characterized. Moreover, employing ligands 1 and 2 the two dinitrogen complexes [W(N₂)₂(dppe)(PNP)] (9) and [Mo(N₂)₂(dppe)(pyNP₂) (10), respectively, are prepared. Both systems are investigated by vibrational and NMR spectroscopy; in addition, complex 10 is structurally characterized.     

Oxime-functionalized diazamesocyclic derivates and their metal complexes: Effect of the ligand backbones and anions on the generation of novel monomeric and mono-μ-Cl dimeric Cu complexes

Two oxime-functionalized diazamesocyclic derivates, namely, N,N′-bis(acetophenoneoxime)-1,4-diazacycloheptane (H₂L¹) and N,N′-bis(acetophenonoxime)-1,5-diazacyclooctane (H₂L²), have been prepared and characterized. Both ligands (obtained in the hydrochloride form) can form stable metal complexes with Cu^II and Ni^II salts, the crystal structures of which were determined by X-ray diffraction technique. The reactions of H₂L¹ with Cu(ClO₄)₂ and Ni(ClO₄)₂ afford a penta-coordinated mononuclear complex [Cu(H₂L¹)Cl] · ClO₄ (1) and a four-coordinated monomeric [Ni(HL¹)] · ClO₄ (2), in which the ligand is monodeprotonated. The ligand H₂L² also forms a quite similar mononuclear [Ni(HL²)] · ClO₄ complex with Ni(ClO₄)₂, according to our previous work. However, reactions of different Cu^II salts [Cu(ClO₄)₂, CuCl₂ and Cu(NO₃)₂ for 3, and CuSO₄ for 4] with H₂L² in the presence of NaClO₄ yield two unusual mono-μ-Cl dinuclear Cu^II complexes [Cu₂(HL²)₂Cl] · (ClO₄) (3), and [Cu₂(H₂L²)(HL²)Cl] · (ClO₄)₂ · (H₂O)(4). These results indicate that the resultant Cu^II complexes (1, 3 and 4) are sensitive to the backbones of diazamesocycles and even auxiliary anions.     

Organocyanide coordination chemistry: Syntheses, structural characterisations and magnetic properties of copper (II) complexes with a di-imine/pyridine ligand

The reactions between the copper (II) salts [CuXL]PF₆ (L: 2,6-[1-(2,6-diisopropylphenylimino)ethyl]pyridine) (X = Cl 1, X = Br 2) and LiTCNQ, in a DMF/water mixture, or Et₃NH(TCNQ)₂, in acetone, produced the new complexes [CuXL(TCNQ)] (X = Cl 3, X = Br 4). For both compounds, crystallographic studies have clearly evidenced the existence of dimeric complexes [{CuClL}(TCNQ)]₂ owing to π-π overlap between two adjacent TCNQ⁻ radical anions. Compound 1 reacted with Et₄N(C₁₀N₇) to afford the mononuclear derivative [CuClL(C₁₀N₇)] (5), while its reaction with K₂C₁₀N₆ produced the dinuclear complex [(CuClL)₂(C₁₀N₆)] (6). The crystal structures of complexes 5 and 6 have been determined by X-ray crystallography. Magnetic studies have revealed that compound 6 displays weak antiferromagnetic interactions between the two metal centres, conversely compounds 3 and 5 exhibit purely paramagnetic behaviours.     

Complexes of Ag with mixed donor phenanthroline-containing macrocycles: spectrofluorimetric, spectrophotometric, conductometric and potentiometric studies

The reactions of Ag⁺ with five mixed donor phenanthroline-containing macrocycles (L¹-L⁵) having N₂S₃-, N₂S₂O-, N₂S₂-, N₃S₂-, and N₄S₂-donor sets, respectively, have been studied in MeCN by spectrofluorimetric, spectrophotometric, conductometric and potentiometric methods. All ligands form 1:1 [Ag(L)]⁺ complexes, and in the case of L⁴ and L⁵, formation of 1:2 [Ag(L)₂]⁺ species is also observed. The corresponding formation constants have been evaluated and their values allow a deeper insight into the role played by complexation process in the potentiometric selectivity for Ag⁺ of membrane electrodes (ISE), and in the selective transport of Ag⁺ through supported liquid membrane (SLM) systems based on these ligands. The X-ray crystal structure of the complex [Ag(L⁴)]BF₄ is also reported.     

Dicopper(II) and dinickel(II) complexes of Schiff-base macrocycles derived from 5,5-dimethyl-1,9-diformyldipyrromethane

The synthesis and characterisation of two dicopper(II) and two dinickel(II) macrocyclic complexes, [Cu^II₂L^Pr] (10), [Cu^II₂L^Bu] (11), [Ni^II₂L^Pr] (12) and [Ni^II₂L^Bu] (13), are reported. The two new Schiff-base macrocycles (L^Pr)⁴⁻ and (L^Bu)⁴⁻ are isolated as dimetallic complexes 10-13 by the [2+2] condensation of 5,5-dimethyl-1,9-diformyldipyrromethane (9) and 1,3-diaminopropane or 1,4-diaminobutane, respectively, using Cu²⁺ or Ni²⁺ template ions. Single crystal X-ray structure determinations carried out on 10-13 show that each metal atom is in a square planar N₄ geometry, being bound to two deprotonated pyrrole nitrogen atoms of one dipyrromethane unit and to the two adjacent imine nitrogen atoms. NMR spectra obtained for the two dinickel(II) complexes 12 and 13 show that in CDCl₃ solution they are highly symmetrical and diamagnetic.     

Synthesis and crystal structure of a salicylatooxovanadium(V) complex of an aminebis(phenolate) ligand: Kinetic studies on its formation from corresponding alkoxo complexes

Synthesis and single crystal X-ray structures of H₂L¹ and VO(L¹)(HL) [H₂L¹ = N,N-bis(2-hydroxy-3,5-ditertiarybutyl)-N′,N′-dimethylethylendiamine) or simply aminebis(phenol) and H₂L = salicylic acid) are reported here. The complex [VO(L¹)(HL)] is in distorted octahedral geometry under O₄N₂ donor environment where the basal core is defined by O(1), O(3), O(2) and N(5) atoms and two axial coordinates are occupied by O(4), an alkoxo-group and N(1), an imino-nitrogen atom. The electron spray mass spectrometric study on [VO(L¹)(HL)] in MeCN clearly points out the existence of single species in solution. Again, the ⁵¹V NMR of the bulk polycrystalline sample reveals that the complex [VO(L¹)(HL)] mainly exists in three out of four possible isomers. The formation of [VO(L¹)(HL)] from both [VO(L¹)(OMe)] and [VO(L¹)(OEt)] was followed kinetically by reacting with salicylic acid in MeCN. The presence of isosbestic point indicates a clean conversion of the reactants to product.     

Pd(II) complexes containing N-alkyl-3-pyridine-5-trifluoromethyl pyrazole ligands: Synthesis, NMR studies and X-ray crystal structures

Palladium [PdCl₂(L)] complexes with N-alkylpyridylpyrazole derived ligands [2-(5-trifluoromethyl-1H-pyrazol-3-yl)pyridine (L¹), 2-(1-ethyl-5-trifluoromethyl-1H-pyrazol-3-yl)pyridine (L²), 2-(1-octyl-5-trifluoromethyl-1H-pyrazol-3-yl)pyridine (L³), and 2-(3-pyridin-2-yl-5-trifluoromethyl-pyrazol-1-yl)ethanol (L⁴) were synthesised. The crystal and molecular structures of [PdCl₂(L)] (L = L², L³, L⁴) were resolved by X-ray diffraction, and consist of monomeric cis-[PdCl₂(L)] molecules. The palladium centre has a typical square-planar geometry, with a slight tetrahedral distortion. The tetra-coordinate metal atom is bonded to one pyridinic nitrogen, one pyrazolic nitrogen and two chlorine ligands in cis disposition. Reaction of L (L², L⁴) with [Pd(CH₃CN)₄](BF₄)₂, in the ratio 1M:2L, gave complexes [Pd(L)]₂(BF₄)₂. Treatment of [PdCl₂(L)] (L = L², L⁴) with NaBF₄ and pyridine (py) and treatment of the same complexes with AgBF₄ and triphenylphosphine (PPh₃) yielded [Pd(L)(py)₂](BF₄)₂ and [Pd(L)(PPh₃)₂](BF₄)₂ complexes, respectively. Finally, reaction of [PdCl₂(L⁴)] with 1 equiv of AgBF₄ yields [PdCl(L⁴)](BF₄).     

Preparation and characterization of dinuclear palladium tetraamin-thiophenolate complexes coligated by bridging acetate and acetamidate units

The aromatic thioether (2,6-bis((2-(dimethylamino)ethylamino)methyl)phenyl)(tert-butyl)sulfane (6) reacts with [Pd(NCCH₃)₂Cl₂] under S-C bond cleavage to give the dinuclear palladium(II) complex [L³Pd₂(μ-Cl)]²⁺ (7), where (L³)⁻ = 2,6-bis((2-(dimethylamino)ethylamino)methyl)-thiophenolate. Complex 7 reacts readily with sodium acetate and sodium acetamide by the displacement of the bridging chloride group forming [L³Pd₂(μ-OAc)]²⁺ (8) and [L³Pd₂(μ-ONHCCH₃)]²⁺ (9), respectively. Complex 8 can also be prepared by the reaction of 6 with [Pd(OAc)₂]. All complexes were isolated as perchlorate salts and fully characterized by ESI-MS, IR, ¹H, and ¹³C NMR spectroscopy. The structures of 7[ClO₄] and 9[ClO₄]₂ have been determined by X-ray crystallography. The latter structure reveals a μ_1,3-bridging acetamidate unit showing that (L³)⁻ can alter its conformation sufficiently to accommodate a multi-atom bridging species between the two Pd atoms.     

Zinc(II) and mercury(II) coordination architectures with two pyridyl/benzimidazol-1-yl-based ligands: Crystal structures and photoluminescent properties

In our efforts to investigate the relationships between the structures of ligands and their complexes, two structurally related ligands, 1-(2-pyridylmethyl)-1H-benzimidazole (L¹) and 1-(4-pyridylmethyl)-1H-benzimidazole (L²), and their four complexes, [Zn(L¹)₂Cl₂] (1), [Hg(L¹)Br₂]_∞ (2), {[Zn(L²)Cl₂](CH₃CN)}_∞ (3) and [Hg(L²)Br₂]₂(CH₃CN)₂ (4) were synthesized and structurally characterized by elemental analyses, IR spectra and single-crystal X-ray diffraction analysis. Structural analyses show that 1 has a mononuclear structure, and 2 and 3 both take 1D structure. While 4 takes a dinuclear structure. 1, 2 and 4 were further linked into higher-dimensional supramolecular networks by weak interactions, such as C-H?Cl and C-H?Br H-bonding, C-H?π, and π?π stacking interactions. The structural differences of 1-4 may be attributed to the difference of the spatial positions of the terminal N donor atoms in the pendant pyridyl groups in L¹ and L², in which the pyridine rings may act as the directing group for coordination and the benzimidazole rings act as the directing group for π?π stacking and C-H?π interactions. The luminescent properties of the corresponding complexes and ligands have been further investigated.     

Preferential azido bridging regulating the structural aspects in cobalt(III) and copper(II)-Schiff base complexes: Syntheses, magnetostructural correlations and catalytic studies

A tridentate NNO donor Schiff base ligand [(1Z,3E)-3-((pyridin-2-yl)methylimino)-1-phenylbut-1-en-1-ol = LH] in presence of azide ions coordinates with cobalt(II) and copper(II) ions giving rise to three new coordination complexes [Co₂(L)₂(μ_1,1-N₃)₂(N₃)₂] (1), [Cu₂(L)₂(μ_1,3-N₃)]·ClO₄ (2) and [(μ_1,1-N₃)₂Cu₅(μ-OL)₂(μ_1,1-N₃)₄(μ_1,1,1-N₃)₂]_n (3). The complexes have been characterized by elemental analysis, FT-IR, UV-Vis spectral studies, and single crystal X-ray diffraction studies. These complexes demonstrate that under different synthetic conditions the azide ions and the Schiff base ligand (LH) show different coordination modes with cobalt(II) and copper(II) ions, giving rise to unusual dinuclear and polynuclear species (1, 2 and 3) whose structural variations are discussed. Magneto-structural correlation for the very rare singly μ_1,3-N₃ bridged Cu^II-Schiff base dinuclear species (2) has been studied. In addition, the catalytic properties of 1 for alkene oxidation and the general catalase-like activity behavior of 2 have been discussed.     

Coordination chemistry of heterocycle-functionalized diazamesocycles: tuning the productive Ni complexes through altering the pendants of ligands

In order to further understand the coordination chemistry of diazamesocyclic systems, a series of mononuclear Ni^II complexes with 1,4-diazacycloheptane (DACH) functionalized by additional imidazole or pyridine donor pendants, including [NiL¹](ClO₄)₂ · H₂O (1), [NiL¹Cl](ClO₄) (2), [NiL²Cl](ClO₄) · CH₃OH (3), [NiL²Cl][NiL²](ClO₄)₃ (4) and [NiL³](ClO₄)₂ (5), where L¹ = 1,4-bis(N-1-methylimidazol-2-yl-methyl)-1,4-diazacycloheptane, L² = 1,4-bis(pyridyl-2-yl-methyl)-1,4-diazacycloheptane, and L³ = 1,4-bis-(imidazol-4-yl-methyl)-1,4-diazacycloheptane, have been prepared and characterized. A detailed study on the solid structures and solution spectra of these complexes indicates that tetradentate ligands L¹, L² and L³ would lead to new Ni^II complexes with different coordination environments in the solid states and solution. The N-methyl substituted imidazole functionalized ligand L¹ forms green compound 2 and yellow product 1; while the pyridine functionalized ligand L² affords red product 4 and green complex 3; the ligand L³ results in only one stable mononuclear Ni^II product 5. The solution behaviors of these interesting compounds were also investigated by UV-Vis technique.     

Tuning the formation of copper(I) coordination architectures with quinoxaline-based N,S-donor ligands by varying terminal groups of ligands and reaction temperature

Five new complexes [Cu₂(L¹)I₂]_∞ (1), [Cu(L²)I]₂ (2), {[Cu₂(L²)I₂](CH₃CN)₃}_∞ (3), [Cu₂(L³)I₂]_∞ (4) and {[Cu(L³)I](CH₃CN)}₂ (5) have been obtained by reacting three structurally related ligands, 2,3-bis(n-propylthiomethyl)quinoxaline (L¹), 2,3-bis(tert-butylthiomethyl)quinoxaline (L²) and 2,3-bis[(o-aminophenyl)thiomethyl]quinoxaline (L³) with CuI, respectively, at different temperatures. Single crystal X-ray analyses show that 1, 3, 4 possess 1D chain structures, while 2 and 5 are discrete dinuclear molecules. It is interesting that the reactions of CuI with L¹ at room temperature and 0 °C, respectively, only afforded same structure of 1 (1a and 1b), while using L² (or L³) instead, two different frameworks 2 and 3 (or 4 and 5) have been obtained. The structural changes mainly resulted from the different conformations that L² or L³ adopted at different temperatures. Our research indicates that terminal groups of ligands take an essential role in the framework formation, and the reaction temperature also has important effect on the construction of such Cu(I) coordination architectures. Furthermore, the influence of hydrogen bonds on the conformation of ligands and the supramolecular structures of these complexes have also been explored. The luminescence properties of complexes 1, 2, and 4 have been studied in solid state at room temperature.     

A rare case of solution and solid state inter-conversion of two copper(II) dimers and a copper(II) chain

Three Cu(II)-azido complexes of formula [Cu₂L₂(N₃)₂] (1), [Cu₂L₂(N₃)₂]·H₂O (2) and [CuL(N₃)]_n (3) have been synthesized using the same tridentate Schiff base ligand HL (2-[(3-methylaminopropylimino)-methyl]-phenol), the condensation product of N-methyl-1,3-propanediamine and salicyldehyde). Compounds 1 and 2 are basal-apical μ-1,1 double azido bridged dimers. The dimeric structure of 1 is centrosymmetric but that of 2 is non-centrommetric. Compound 3 is a μ-1,1 single azido bridged 1D chain. The three complexes interconvert in solution and can be obtained in pure form by carefully controlling the synthetic conditions. Compound 2 undergoes an irreversible transformation to 1 upon dehydration in the solid state. The magnetic properties of compounds 1 and 2 show the presence of weak antiferromagnetic exchange interactions mediated by the double 1,1-N₃ azido bridges (J = −2.59(4) and −0.10(1) cm−¹, respectively). The single 1,1-N₃ bridge in compound 3 mediates a negligible exchange interaction.     

Two new end-to-end single dicyanamide bridged Cu(II) complexes with Schiff base ligands: Structural, electrochemical and magnetic properties

The synthesis, crystal structures and magnetic properties of two different copper(II) complexes of formula [Cu(L¹)(dca)]_n · nClO₄ (1) and [Cu(L²)]₂(dca)(ClO₄) (2) [L¹ = N,N-dimethylethylene-N′-(pyridine-2-carbaldiiminato), HL² = N,N-dimethylethylene-N′-salicylaldiiminato, dca = dicyanamide anion] are described. Spectroscopic and electrochemical properties have also been discussed. A one-dimensional chain structure with single, symmetrical, μ_1,5-dca bridges is found in compound 1. The copper atom in 1 has a square pyramidal geometry. A tridentate Schiff base ligand, having NNN donor sites, and one nitrogen atom from dca occupy the basal plane. N(18) of a neighbouring unit occupies the apical site. The Schiff base used in compound 2 is a tridentate anion with NNO donor sites, which changes the structure in a dinuclear unit of copper atoms bridged by single end-to-end dicyanamide ion. The environment around copper in 2 is square planar. Magnetic susceptibility measurements for 1 and 2 reveal the occurrence of weak antiferromagnetic interaction through the dca ligand.