Alkoxy-substituted group 6 allenylidene complexes - Synthesis and properties

Bis(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)OR], as well as mono(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)Ph], of chromium and tungsten are accessible from propynones [HCCC(O)Ph] or propynoic acid esters [HCCC(O)OR; R = Et, (−)-menthyl, endo-bornyl] by the following reaction sequence: (a) deprotonation of the alkynes, (b) reaction with [(CO)₅M-THF] (M = Cr, W), and (c) alkylation of the resulting alkynyl metallate, [(CO)₅MCCC(O)R], with Meerwein salts. Vinylidene complexes, [(CO)₅MCC(R′)C(O)OR], are formed as a by-product by C_β-alkylation of the alkynyl metallate. Dimethylamine displaces one alkoxy substituent of the bis(alkoxy)allenylidene complexes to give dimethylamino(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR)NMe₂]. The analogous reaction of dimethylamine with a mono(alkoxy)-substituted allenylidene complex affords the aminoallenylidene complex [(CO)₅CrCCC(NMe₂)Ph]. When the amine is used in large excess, the α,β-unsaturated aminocarbene complex [(CO)₅CrC(NMe₂)C(H)C(NMe₂)Ph] is additionally formed by addition of the amine across the C_αC_β-bond of the allenylidene ligand. The reaction of [(CO)₅MCCC(OEt)₂] with dimethyl ethylenediamine offers access to bis(amino)allenylidene complexes, in which C_γ is part of a five-membered heterocycle. Photolysis of bis(alkoxy)allenylidene complexes in the presence of triphenylphosphine yields tetracarbonyl- and tricarbonyl{bis(phosphine)}allenylidene complexes. Diethylaminopropyne inserts into the C_βC_γ bond of [(CO)₅MCCC(OEt)OMethyl] to give alkenylallenylidene complexes. Subsequent acid-catalyzed intramolecular cyclization affords a pyranylidene complex.     

Iridium(III)-vinylidene chemistry: Conversion of an iridacyclopentadiene-chlorido complex and terminal alkynes to iridacyclopentadiene-vinyl complexes

The reactions of [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(Cl) (9, R = CO₂Me) with propargyl alcohol derivatives (2-propyn-1-ol, 2-methyl-3-butyn-2-ol, 1-ethynylcyclopentanol, and 1-ethynylcyclooctanol), in the presence of water leads to the formation of iridium(III)-vinyl complexes bearing the general structure [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(CO)(κ¹-vinyl) where vinyl = -CHCH₂, -(E)-CHCHMe, -CHC(CH₂)₄, or -CHC(CH₂)₇. In these, the CO ligand was derived from the terminal carbon of the starting alkyne and the oxygen atom from water. Under anhydrous conditions, 9 undergoes reaction with 2-propyn-1-ol to give trimethyl 1,3-dihydro-3-oxo-4,5,6-isobenzofurantricarboxylate, the result of a cycloaromatization/transesterification involving the buta-1,3-dien-1,4-diyl ligand in 9 and 2-propyn-1-ol.     

Ferrocenyl-substituted allenylidene complexes of chromium, molybdenum and tungsten: Synthesis, structure and reactivity

Bis(ferrocenyl)-substituted allenylidene complexes, [(CO)₅MCCCFc₂] (1a-c, Fc = (C₅H₄)Fe(C₅H₅), M = Cr (a), Mo (b), W (c)) were obtained by sequential reaction of Fc₂CO with Me₃Si-CCH, KF/MeOH, n-BuLi, and [(CO)₅M(THF)]. For the synthesis of related mono(ferrocenyl)allenylidene chromium complexes, [(CO)₅CrCCC(Fc)R] (R = Ph, NMe₂), three different routes were developed: (a) reaction of the deprotonated propargylic alcohol HCCC(Fc)(Ph)OH with [(CO)₅Cr(THF)] followed by desoxygenation with Cl₂CO, (b) Lewis acid induced alcohol elimination from alkenyl(alkoxy)carbene complexes, [(CO)₅CrC(OR)CHC(NMe₂)Fc], and (c) replacement of OMe in [(CO)₅CrCCC(OMe)NMe₂] by Fc. Complex 1a was also formed when the mono(ferrocenyl)allenylidene complex [(CO)₅CrCCC(Fc)NMe₂] was treated first with Li[Fc] and the resulting adduct then with SiO₂. The replacement route (c) was also applied to the synthesis of an allenylidene complex (7a) with a CC spacer in between the ferrocenyl unit and C_γ of the allenylidene ligand, [(CO)₅CrCCC(NMe₂)-CCFc]. The related complex containing a CHCH spacer (9a) was prepared by condensation of [(CO)₅CrCCC(Me)NMe₂] with formylferrocene in the presence of NEt₃. The bis(ferrocenyl)-substituted allenylidene complexes 1a-c added HNMe₂ across the C_α-C_β bond to give alkenyl(dimethylamino)carbene complexes and reacted with diethylaminopropyne by regioselective insertion of the CC bond into the C_β-C_γ bond to afford alkenyl(diethylamino)allenylidene complexes, [(CO)₅MCCC(NEt₂)CMeCFc₂]. The structures of 5a, 7a, and 9a were established by X-ray diffraction studies.     

Synthesis and characterization of triphenylphosphine stabilized silver α,β-unsaturated carboxylate: Crystal structure of [Ag(O2CCHC(CH3)2)(PPh3)2]

A series of triphenylphosphine coordinated silver α,β-unsaturated carboxylates of type [Ag(O₂CR)(PPh₃)_n: n = 1, R = CH₃CHCH (2a), (CH₃)₂CCH (2b), CH₃CH₂CHCH (2c), CH₃CH₂CH₂CHCH (2d), PhCHCH (2e), CH₂CH (2f); n = 2, CH₃CHCH (3a), (CH₃)₂CCH (3b), CH₃CH₂CHCH (3c), CH₃CH₂CH₂CHCH (3d)] were prepared by reaction of relative silver carboxylates (1a-1f) with triphenylphosphine in chloroform. These complexes were obtained in high yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, ³¹P NMR and IR spectroscopy. Thermal stability of the complexes has been determined by TG analysis. The molecular structure of [Ag((O₂CCHC(CH₃)₂))(PPh₃)₂] (3b) shows that the senecioato ligand is chelated with silver atom and generate, a distorted tetrahedron.     

A new cumulene diiron complex related to the active site of Fe-only hydrogenases and its phosphine substituted derivatives: synthesis, electrochemistry and structural characterization

A new cumulene diiron complex related to the Fe-only hydrogenase active site [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₆] (1) was obtained by treatment of (μ-LiS)₂Fe₂(CO)₆ with excess 1,4-dichloro-2-butyne. By controllable CO displacement of 1 with PPh₃ and bis(diphenylphosphino)methane (dppm), mono- and di-substituted complexes, namely [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅L] (2: L = PPh₃; 3: L = dppm) and [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄L₂] (4: L = PPh₃; 5: L = dppm) could be prepared in moderate yields. Treatment of 1 with bis(diphenylphosphino)ethane (dppe) afforded a double butterfly complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₅]₂(μ-dppe) (7). With dppm in refluxing toluene, a dppm-bridged complex [(μ-SCH₂C(S)CCH₂)Fe₂(CO)₄(μ-dppm)] (6) was obtained. These model complexes were characterized by IR, ¹H, ³¹P NMR spectra and the molecular structures of 1, 2 and 5-7 were determined by single crystal X-ray analyses. The electrochemistry of 1-3 was studied and the electrocatalytic property of 1 was investigated for proton reduction in the presence of HOAc.     

Non-aromatic stabilised form of 3,4-difluoropyrrole at triosmium clusters: N-H and C-H versus C-F activation

Reaction of 3,4-difluoropyrrole with the labile triosmium cluster [Os₃(CO)₁₀(CH₃CN)₂] affords products in which C-H, N-H and C-F bonds are cleaved under mild conditions. C-H and N-H bonds are cleaved to give [Os₃H(NCCFCFCH₂)(CO)₁₀] (1) a non-aromatic stabilised form of 3,4-difluoropyrrole. Thermolysis of 1 affords in moderate yields the compounds [Os₃H₂(CCCFCHNH)(CO)₉] (2) and [Os₃H₂(NCHCFCFC)(CO)₉] (3). For compound 3, C-H and N-H bonds are cleaved with concomitant migration of H atoms to the metal framework. In contrast, for compound 2 activation of C-H and C-F bonds leads to coordination of the ligand through the carbon atoms, acting as a four-electron donating species.     

Synthesis and characterisation of isomeric cycloaurated complexes derived from the iminophosphorane Ph3PNC(O)Ph

Using different organomercury substrates, two isomeric cycloaurated complexes derived from the stabilised iminophosphorane Ph₃PNC(O)Ph were prepared. Reaction of Ph₃PNC(O)Ph with PhCH₂Mn(CO)₅ gave the manganated precursor (CO)₄Mn(2-C₆H₄C(O)NPPh₃), metallated on the C(O)Ph substituent, which yielded the organomercury complex ClHg(2-C₆H₄C(O)NPPh₃) by reaction with HgCl₂ in methanol. Transmetallation of the mercurated derivative with Me₄N[AuCl₄] gave the cycloaurated iminophosphorane AuCl₂(2-C₆H₄C(O)NPPh₃) with an exo PPh₃ substituent. The endo isomer AuCl₂(2-C₆H₄Ph₂PNC(O)Ph) [aurated on a PPh₃ ring] was obtained by an independent reaction sequence, involving reaction of the diarylmercury precursor Hg(2-C₆H₄P(NC(O)Ph)Ph₂)₂ [prepared from the known compound Hg(2-C₆H₄PPh₂)₂ and PhC(O)N₃] with Me₄N[AuCl₄]. Both of the isomeric iminophosphorane derivatives were structurally characterised, together with the precursors (2-HgClC₆H₄)C(O)NPPh₃ and (CO)₄Mn(2-C₆H₄C(O)NPPh₃). The utility of ³¹P NMR spectroscopy in monitoring reaction chemistry in this system is described.     

Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of molybdenum Me2Si[CHMo(NAr)(ORF3)2]2 and PhVinSi[CHMo(NAr)(ORF3)2]2

Bimetallic alkylidene complexes of molybdenum (R_F3O)₂(ArN)MoCH-SiMe₂-CHMo(NAr)(OR_F3)₂ (1) and (R_F3O)₂(ArN)MoCH-SiPhVin-CHMo(NAr)(OR_F3)₂ (2) (Ar = 2,6-C₆H₃; R_F3 = CMe₂CF₃) have been prepared by the reactions of vinyl silicon reagents Me₂Si(CHCH₂)₂ and PhSi(CHCH₂)₃ with known alkylidene compound PhMe₂C-CHMo(NAr)(OR_F3)₂. Complexes 1 and 2 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1 and 2 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and predominant cis-units content in the case of 2.     

Synthesis and solid-state structures of (triphos)iridacyclopentadiene complexes as models for vinylidene intermediates in the [2 + 2 + 1] cyclotrimerization of alkynes

The iridium 1,1,1-tris(diphenylphosphinomethyl)ethane (triphos) complexes [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(NCMe)]BF₄ (2-NCMe, R = CO₂Me) and [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(CO)]BF₄ (2-CO, R = CO₂Me) serve as models for proposed iridium-vinylidene intermediates of relevance to the [2 + 2 + 1] cyclotrimerization of alkynes. The solid-state structures of 2-NCMe, 2-CO, and [κ²(C¹,C⁴)-CRCRCRCR]{CH₃C(CH₂PPh₂)₃}Ir(Cl) (2-Cl), were determined by X-ray crystallography.     

Gas-phase molecular structures of substituted 1,3-bisketenes: A challenge for theory and experiment

Molecular structures of dimethylbis(trimethylsilylketyl)silane (Me₂Si[C(SiMe₃)CO]₂), dimethylbis(trimethylgermylketyl)silane (Me₂Si[C(GeMe₃)CO]₂), and dimethylbis(trimethylstannylketyl)germane (Me₂Ge[C(SnMe₃)CO]₂) have been studied in the gas phase by electron diffraction accompanied by high level ab initio and DFT calculations. Extensive theoretical conformational analyses of the molecules in the vapour predicted a possibility of existence of two types of conformers with small energy differences. The first type had gauche-gauche arrangements of the ketenyl groups in the central C(CO)XC(CO) fragments directed away from each other. The second type had nearly syn-gauche arrangements of the ketenyl groups. In addition, the energy differences were found to depend on the level of computations used. The experimental analysis, in turn, was unable to distinguish between different conformers due to the large number of similar overlapping distances. The experimental data were fitted by an averaged single-conformer model, which nevertheless allowed reliable determination of bonds and bonded angles in the molecules. Main experimental (r_h1) structural parameters for Me₂Si[C(SiMe₃)CO]₂, Me₂Si[C(GeMe₃)CO]₂, and Me₂Ge[C(SnMe₃)CO]₂, i.e. Me₂X[C(YMe₃)CO]₂ (X,Y = Si, Ge, Sn), are (X-C)_mean 187.7(1) pm, 194.6(2) pm, 216.1(3) pm; (Y-C)_mean, 187.7(1) pm, 188.8(8) pm, 194.6(4) pm; (CC)_mean, 135.3(5) pm, 131.6(5) pm, 131.5(13) pm; (CO)_mean, 117.0(7) pm, 117.4(7) pm, 119.0(11) pm; (C-H)_mean, 110.6(7) pm, 110.0(4) pm, 109.1(13) pm; (X(Y)-CC)_mean, 114.4(2)°, 115.6(1)°, 115.6(2)°; (C-X(Y)-C_Me)_mean, 108.3(3)°, 108.4(3)°, 108.9(13)°; C(2)-C(1)-Y(4)-C(10), −19(6)°, 5(4)°, −9(10)°; C(7)-C(6)-Y(9)-C(38),−22(7)°, −32(3)°, −9(10)°; C(2)-C(1)-X(5)-C(6), 128(4)°, 142(1)°, 108(9)°; C(7)-C(6)-X(5)-C(1), 92(6)°, 115(2)°, 108(9)°, respectively.     

Synthesis and structures of copper and gold complexes of the P,N ligands RNC(Bu)C(H)RPPh2 (R = SiMe3, H)

The reaction of the chelating P,N ligand RNC(Bu^t)CH(R)PPh₂ (R = SiMe₃) (1) with CuCl and CuCl₂ (probably by way of reduction to Cu(I) by the phosphine ligand) or Cu(NCCH₃)₄ClO₄ yielded the dimeric 1:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}Cl]₂ (2) or the monomeric 2:1 complex [Cu{PPh₂CH(R)C(Bu^t)NR}₂]ClO₄ (3), respectively. The presence of trace amounts of water during the reaction resulted in the successive cleavage of the two trimethylsilyl groups of the ligand and the formation of the monomeric chelate complexes [Cu{PPh₂CH(R)C(Bu^t)NH}₂]ClO₄ (4) and [Cu{PPh₂CH₂C(Bu^t)NH}₂]ClO₄ (5). Oxidation of 5 by atmospheric oxygen led to small quantities of the blue Cu(II) complex [Cu{(O)PPh₂CH₂C(Bu^t)NH}₂](ClO₄)₂ (6). The dimeric gold complexes [Au{PPh₂CH₂C(Bu^t)NH}]₂X₂ (X = BF₄, ClO₄) (7) were similarly obtained from the previously described Au{PPh₂CH(R)C(Bu^t)NR}Cl by replacing the covalently bound chlorine with the weakly coordinating anions in the presence of small quantities of water. The solution and solid state structures (except 5) of all complexes were determined by NMR spectroscopy and X-ray crystallography.     

Synthesis and coordination of the bifunctionalized ylides Ph2P(CH2)n(Ph)2PCHCOOMe (n = 1, 2) and ketenylidene Ph2P(CH2)2(Ph)2PCCO to Pd and Pt complexes

In this paper it is reported the synthesis of the phosphonium salts [Ph₂P(CH₂)_n(Ph)₂PCH₂COOMe]Br (n = 1 (1), 2 (2)) and [Ph₂P(CH₂COOMe)(CH₂)_n(Ph)₂PCH₂COOMe]Br₂ (n = 3 (3)) derived from the reactions of the diphosphines dppm, dppe and dppp with methyl bromoacetate. By reaction of the monophosphonium salt of dppm and dppe with the strong base Na[N(SiMe₃)₂] the corresponding carbonyl stabilized ylides Ph₂P(CH₂)_n(Ph)₂PCHCOOMe (n = 1 (4), 2 (5)) were obtained. The Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide was reacted with Pd(II) and Pt(II) substrates. From these reactions were isolated exclusively complexes in which the ylide was chelated to the metal through the free phosphine group and the ylidic carbon atom. A further reaction of the Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide with 1.5 equiv. of Na[N(SiMe₃)₂] gives the bifunctionalized ketenylidene Ph₂P(CH₂)₂(Ph)₂PCCO (6) system. This cumulenic ylide reacts with Pt(II) complexes to form a chelated derivative in which IR and NMR spectra suggest the breaking of the CC bond of the -CCO group.     

Addition of protic nucleophiles to alkynyl methoxy carbene ligands in diiron complexes

Different protic nucleophiles (i.e.Ph₂CNH, PhSH, MeCO₂H, PhOH) can be added to the CC bond of [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CCTol}(Cp)₂][SO₃CF₃] (1), affording new diiron alkenyl methoxy carbene complexes.The additions of Ph₂CNH and MeCO₂H are regio and stereoselective, resulting in the formation of the 5-aza-1-metalla-1,3,5-hexatriene [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)(NCPh₂)}(Cp)₂][SO₃CF₃] (2), and the 2-(acyloxy)alkenyl methoxy carbene complex [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)OC(O)Me)}(Cp)₂][CF₃SO₃] (5); the E isomer of the former and the Z of the latter are formed exclusively.Conversely, the addition of PhSH is regio but not stereoselective; thus, both the E and Z isomers of [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)(SPh)}(Cp)₂][SO₃CF₃] (3) are formed in comparable amounts.Compounds 3 and 5 are demethylated upon chromatography through Al₂O₃, resulting in the formation of the acyl complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(O)C_βHC_γ(Tol)(SPh)}(Cp)₂] (4) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(O)C_βHC_γ(Tol)OC(O)Me}(Cp)₂] (6), respectively, both with a Z configured C_βC_γ bond.Finally, the reaction of 1 with PhOH proceeds only in the presence of an excess of Et₃N affording the 2-(alkoxy)alkenyl acyl complex [Fe₂{μ-CN(Me)(Xyl)}(μ- CO)(CO){C_α(O)C_βHC_γ(Tol)(OPh)}(Cp)₂] (7). The crystal structures of 4 · CH₂Cl₂ and 7 · 0.5CH₂Cl₂ have been determined by X-ray diffraction experiments.     

Vinyl-ruthenium entities as markers for intramolecular electron transfer processes

The present account summarizes our work on mononuclear vinyl ruthenium complexes of the type RuCl(CHCHR′)(CO)(PR₃)₂L, divinyl-bridged diruthenium complexes {RuCl(CO)(PR₃)₂L}₂(μ-CHCH-bridge-CHCH) and on heterobinuclear systems where only one of the two redox-active metal-organic moieties is of the vinyl ruthenium type. The favourable electrochemical properties of the {RuCl(CO)(PR₃)₂L(CHCH-) tag and the various spectroscopic handles offered by that unit provide detailed insights into the charge and spin delocalization over the {MCl(CO)(PR₃)₂L} and CHCHR′ constituents in their associated radical cations. They also offer a convenient means for measuring electronic coupling in the mixed-valent radical cations of the homo- and heterodinuclear vinyl-bridged complexes and, under favourable circumstances, on the rate of intramolecular electron transfer between the individual redox sites. Aspects of this work include examples of complexes showing time-dependent valence trapping, complexes aimed at delineating the efficiencies of through-space versus through-bond pathways for electron delocalization, complexes where electrostatic effects on the redox splitting ΔE_1/2 dominate over those from the resonance contribution and systems that exhibit extensive charge and spin delocalization between two dislike endgroups despite their intrinsically different redox potentials.     

Diphosphinoazine rhodium(III) and iridium(III) octahedral complexes

Rhodium(III) and iridium(III) octahedral complexes of general formula [MCl₃{R₂PCH₂C(Bu^t)NNC(Bu^t)CH₂PR₂}] (M = Rh, Ir; R = Ph, c-C₆H₁₁, Prⁱ, Bu^t; not all the combinations) were prepared either from the corresponding diphosphinoazines and RhCl₃ · 3H₂O or by the oxidation of previously reported bridging complexes [{MCl(1,2-η:5,6-η-CHCHCH₂CH₂CHCHCH₂CH₂)}₂{μ-R₂PCH₂C(Bu^t)NNC(Bu^t)CH₂PR₂}] with chlorine-containing solvents. Depending on the steric properties of the ligands, complexes with facial or meridional configuration were obtained. Crystal and molecular structures of three facial and two meridional complexes were determined by X-ray diffraction. Hemilability of ligand in the complex fac-[RhCl₃{(C₆H₁₁)₂PCH₂C(Bu^t)NNC(Bu^t)CH₂P(C₆H₁₁)₂}] consisting in reversible decoordination of the phosphine donor group in the six-membered ring was observed as the first step of isomerization between fac and mer isomers.     

The synthesis, structure, reactivity and electrochemical properties of ruthenium complexes featuring cyanoacetylide ligands

The complex [Ru(CCCN)(dppe)Cp*] (1) is readily obtained (ca. 70%) from the sequential reaction of [Ru(CCH₂)(dppe)Cp*]PF₆ with ⁿBuLi and phenyl cyanate. The complex behaves as a typical transition metal acetylide upon reaction with tetracyanoethene, affording a metallated pentacyanobutadiene. Complex 1 is a useful metalloligand, and its reactions with [W(thf)(CO)₅], [RuCl(PPh₃)₂Cp], [RuCl(dppe)Cp*] or cis-[RuCl₂(dppe)₂] all afforded products featuring the M-CCCN-M′ motif, for which ground state structures indicate a degree of polarisation. Electrochemical and spectroelectrochemical studies reveal moderate interactions between the metal centres in the 35-electron dications [{Cp*(dppe)Ru}(μ-CCCN){RuL₂Cp′}]²⁺ (RuL₂Cp′ = Ru(PPh₃)₂Cp, Ru(dppe)Cp*).     

Platinum(II) halide complexes of PPh2(CFCF2) and PPh2(CClCF2). The synthesis and crystal structure of [PtI(μ-I){PPh2(CXCF2)}]2, (X = F, Cl); the first crystallographically characterised iodide-bridged platinum(II) phosphine dimers

The reactions of the fluorovinyl-substituted phosphines PPh₂(CFCF₂) and PPh₂(CClCF₂), with K₂PtX₄ (X = Br, I) have been investigated. The resulting complexes have been characterized by a combination of ¹⁹F and ³¹P{¹H} NMR, IR and Raman spectroscopy. The reactions of these phosphines with K₂PtBr₄ yield the monomeric complexes cis-[PtBr₂{PPh₂(CFCF₂)}₂] (1) and trans-[PtBr₂{PPh₂(CClCF₂)}₂] (2), respectively, whilst the reactions with K₂PtI₄ yield both the monomeric species trans-[PtI₂{PPh₂(CXCF₂)}₂], {X = F (3), Cl (4)}, and the dimeric species [PtI(μ-I){PPh₂(CXCF₂)}]₂, {X = F (5), Cl (6)}. The dimers 5 and 6 represent the first crystallographically characterised platinum(II) iodide-bridged phosphine complexes, and both adopt the symmetric-trans structure.     

Organometallic π-tweezers incorporating pyrazine- and pyridine-based bridging units

Pyrazine- and pyridine-based π-conjugated σ-donor molecules, such as 4,4′-bipyridine, 1,2-di(4-pyridyl)ethylene, 3,5-dipyridyl-1,2,4-triazole, N,N′-bis(4-pyridylmethylidene)benzene-1,4-diamine, 2,5-di(pyridylmethylidene)cyclopentanone, 2,6-di(4-pyridylmethylidene)cyclohexanone (LL, 2a-2g) can successfully be used to span heterobimetallic π-tweezer units of the type [{[Ti](μ-σ,π-CCSiMe₃)₂}M]⁺ ([Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; M = Cu, Ag). The thus accessible di-cationic species [{[Ti](μ-σ,π-CCSiMe₃)₂}MLLM{(Me₃SiCC-μ-σ,π)₂[Ti]}]²⁺ (4), which are formed via the formation of [{[Ti](μ-σ,π-CCSiMe₃)₂}MLL]⁺ (3) complexes, can be isolated in yields between 66% and 99%.However, when C₅H₄NCHCHC₆H₄CHCHNC₅H₄ (5a) and C₅H₄NCHNC₆H₄CHCHNC₅H₄ (5b), respectively, are reacted with {[Ti](μ-σ,π-CCSiMe₃)₂}AgBF₄(1c) in a 1:1 molar ratio, then the silver(I) ion is released from the organometallic π-tweezer 1c and coordination polymers [AgBF₄ · 5a]_n (6a) and [AgBF₄ · 5b]_n (6b) along with [Ti](CCSiMe₃)₂ (7) are formed in quantitative yield.     

New reactions and new products derived from α-deprotonated Fischer-type carbene complexes

Anionic Fischer-type aminocarbene complexes, [(CO)₅MC(NMe₂)CH₂]Li (M = Cr or W) react with Ph₂PCl and [Me₂(MeS)S][BF₄] - a source of SMe⁺ - to afford acyclic complexes (CO)₅MC(NMe₂)CH₂X (X = PPh₂, SMe₂) and (CO)₅MC(NMe₂)CHX₂ X = SMe), the chelates and , and the bridged compounds (CO)₅MC(NMe₂)CH₂XM(CO)₅ (X = PPh₂, SMe). Cyclisation occurs much faster for Cr than for W. Crystal structures illustrate the bonding behaviour in the new complexes and especially characterise carbene-phosphine and carbene-thioether four-membered chelates for the first time. The sulfur-donor in the tetracarbonyl complexes , and shows an exceptionally weak trans influence.