A new moisture-sensitive metal-coordination solids {[Cd(C4O4)(bipy)(H2O)2] · 3H2O}∞ (bipy=4,4-bipyridine)

A new mixed-ligands metal-coordination polymer, [Cd(C₄O₄)(bipy)(H₂O)₂] (1), (bipy=4,4^′-bipyridine), was synthesized under hydrothermal condition and characterized by X-ray diffraction method. A three-dimensional interpenetrating network with one-dimensional channels intercalating water molecules undergoes a reversible hydration-dehydration process upon a cooling-heating cycles associated with distinct color change and structural variation.     

Preparation and crystal structure of two novel cadmium (II)-trimesates, Cd(HTMA)(NC5H5)2 · 0.5CH3OH · 0.5DMF and Cd(HTMA) · 2H2O

Two novel complexes, Cd(HTMA)(NC₅H₅)₂ · 0.5CH₃OH · 0.5DMF (1) and Cd(HTMA) · 2H₂O (2), of cadmium (II)-trimesates are obtained from slow vapor diffusion and urea hydrolysis, respectively. The Cd(II) centers in the two complexes are bridged by three separate HTMA³⁻ ligands using a same coordination fashion, which contains one monodentate and two chelating bidentate carboxyl groups to form the herringbone-like motif. The herringbone-like motif is further interlinked to construct the two-dimensional Cd(II)-HTMA layer, which is stacked by mutual π-stacking of pyridines for 1 and by hydrogen bond of waters for 2. Thermal stabilities of the two complexes were investigated and the results indicated that Cd(II)-TMA layers in the two complexes are stable still upon 190 °C.     

Synthesis, crystal structure, spectral properties and catalytic activity of hexakis(imidazole)manganese(II) bisindole-2-carboxylato bisneocuproine bisdimethyl sulfoxide solvates {[Mn(Im)6] · 2(2-IC) · 2(NC) · 2(DMSO)}

Synthesis, X-ray crystal structure and IR spectrum of {[Mn^II(Im)₆] · 2(2-IC) · 2(NC) · 2(DMSO)} (Im = imidazole, 2-HIC = indole-2-carboxylic acid, NC = 2,9-dimethyl-1,10-phenanthroline, DMSO = dimethyl sulfoxide) are reported. The manganese(II) ion has octahedral geometry with a MnN₆ core. The crystal structure is completed by two NC, two 2-IC⁻ and two DMSO solvate molecules. The individual cations are linked into chains running parallel to the a axis by four intermolecular hydrogen bonding involving two 2-IC⁻solvate. Moreover, these chains are connected by π-π stacking interactions which occur between neocuproine molecules related through inversion center. In IR spectroscopy, the compound spectrum is roughly similar to the imidazole one: (i) above 1800 cm⁻¹, the bands are broad, but when focussing on some of them a doublet structure can be found; (ii) below 1800 cm⁻¹, the bands are sharp and it is then possible to point out the modification of S-O band when this later is involved in bifurcated hydrogen bonding to a second solvate 2-IC⁻. The compound catalyses the disproportionation of H₂O₂; moreover an additional quantity of imidazole increases the reaction rate.     

Synthesis, crystal structure and magnetic properties of the first structurally characterized 1,2-dithiocroconato-containing Cu(II) complex, [Cu(bpca)(H2O)]2[Cu(1,2-dtcr)2]·2H2O

The first crystal and molecular structure of a transition metal complex containing 1,2-dithiocroconate (1,2-dtcr, dianion of 1,2-dimercaptocylopent-1-ene-3,4,5-trione), [Cu(bpca)(H₂O)]₂[Cu(1,2-dtcr)₂]·2H₂O (where bpca is the bis(2-pyrdidylcarbonyl)amide anion), has been determined by single crystal X-ray diffraction methods. The compound crystallizesin the monoclinic syste, space group P2₁/c, with a = 11.661(3), b = 20.255(6), c = 8.265(3) Å, ß = 107.26(2)° and Z = 2. The structure is formally built of [Cu(1,2-dtcr)₂]²⁻ and [Cu(bpca)(H₂O)]⁺ ions and water of hydration. The copper atom of the anion is situated at a crystallographic inversion centre, bonded to four sulfur atoms in a planar, approximately square arrangement. In the cation the copper equatorial plane is formed by the three nitrogen atoms of the bpca ligand and a water oxygen atom. In addition there is a very weak axial bond to one of the sulfur atoms of a 1,2-dtcr ligand in the anion. Through these latter weak bonds each anion is connected to, and sandwiched between, two cations, resulting in neutral, trinuclear, centrosymmetric formula units. The triple-decker molecules are arranged in stacks along the crystallographic a-axis creating close contacts between the terminal copper atoms and bpca groups of the neighbouring molecules. This intermolecular interaction is, however, too weak to define the structure as a chain compound. The distance between adjacent copper atoms within the trinuclear unit is 4.189(1) Å, while the shortest intra-stack metal-metal separation between terminal copper atoms is 5.281(1) Å. Variable-temperature magnetic susceptibility measurements in the temperature r.2–140 K reveal that a Curie law is followed; with three non-interacting copper(II) ions in the formula unit.     

Synthesis, crystal structure and magnetic properties of a chain coordination polymer {[Cu4L2(H2O)] · H2O}n

A chain coordination polymer with the chemical formula {[Cu₄L₂(H₂O)] · H₂O}_n, has been synthesized by the assembly reaction of K₂CuL · 1.5H₂O and Cu(OAC)₂ · H₂O with a 1:1 mole ratio in methanol, where H₄L = 2-hydroxy-3-[(E)-({2-[(2-hydroxybenzoyl)imino]ethyl}imino)methyl] benzoic acid, OAC⁻ = CH₃COO⁻. The crystal structure was determined by single-crystal X-ray diffraction analysis, the compound has chain molecular structure formed by dissymmetrical tetranuclear units. The magnetic measurements showed that Cu-Cu of the complex exhibit antiferromagnetic interactions, and satisfactory fittings to the observed magnetic susceptibility data were obtained by assuming a binuclear system, and further using molecular field approximation to deal with magnetic exchange interactions between binuclear systems.     

K2[Zn(CV)2(H2O)2] · 2H2O: The first Zn(II) complex structurally characterized containing the pseudo-oxocarbon Croconate Violet (CV)

The synthesis, thermal behavior, spectroscopic characterization and crystal and molecular structure of a Zn(II) complex containing the pseudo-oxocarbon Croconate Violet (CV²⁻) dianion, namely K₂[Zn(CV)₂(H₂O)₂] · 2H₂O are reported. Thermal analysis has shown that the complex structure presents coordination and lattice water molecules. According to vibrational spectroscopy the Croconate Violet dianion is coordinated to Zn(II) center through the vicinal oxygen atoms in a chelating fashion with no involvement of CN moieties. The complex structure has been confirmed by single crystal X-ray diffraction analysis. The dianionic units [Zn(CV)₂(H₂O)₂]²⁻ adopt an slight distorted octahedral geometry in which the metallic center is surrounded by six oxygen atoms. These discrete dianionic units are connected through intermolecular hydrogen bonding giving rise to a supramolecular array extended along the crystallographic a axis.     

Square-planar copper(II) complexes with tetradentate amido-carboxylate ligands. Crystal structure of Na2[Cu(obap)]2 · 2H2O. Strain analysis and spectral assignments of complexes

Novel N-N-N-O-type of tetradentate ligands H₃obap (H₃obap = oxamido-N-aminopropyl-N′-benzoic acid) and H₃maeb (H₃maeb = malamido-N-aminoethyl-N′-benzoic acid) and the corresponding square-planar copper(II) complexes have been prepared and characterized. The obap³⁻ and maeb³⁻ ligands coordinate to the copper(II) ion via four ligating atoms (three deprotonated atoms: one carboxylate oxygen and two deprotonated amide nitrogens; one amine nitrogen) with in-plane square chelation. A four coordinate, square-planar geometry has been established crystallographically for the binuclear Na₂[Cu(obap)]₂ · 2H₂O complex. Structural data correlating the square-planar geometry of the [Cu(obap)]⁻ unit and an extensive strain analysis are discussed in relation to the information obtained for similar complexes. The infrared and electronic absorption spectra of the complexes are discussed in comparison to the related complexes of known geometries. Antibacterial activity of ligands and copper(II) complexes towards common Gram-negative and Gram-positive bacteria are reported as well.     

Two new supermolecular structures of organic-inorganic hybrid compounds: [Zn(phen)(SO4)(H2O)2]n and [Cu(phen)(H2O)2] · SO4 (phen = 1,10-phenanthroline)

Two new organic-inorganic hybrid compounds [Zn(phen)(SO₄)(H₂O)₂]_n (1) and [Cu(phen)(H₂O)₂] · SO₄ (2) have been prepared by conventional aqueous solution synthesis and characterized by single-crystal X-ray diffraction, IR spectroscopy, thermal gravimetric analysis (TGA) and fluorescent spectroscopy. In compound 1, the sulfate group adopts bidentate mode to coordinate with two Zn(II) ions to form one-dimensional polymer. The one-dimensional polymers are further linked together via the intermolecular hydrogen-bonding and π-π stacking interactions to form a 3D supramolecular framework. Compound 2 is build up of discrete [Cu(phen)(H₂O]²⁺ cations and SO₄²⁻ anions to form a three-dimensional framework via hydrogen-bonding and π-π stacking interactions. Furthermore, the luminescent properties of both 1 and 2 were studied. The complexes 1 and 2 excited at 280 nm wavelength produced characteristic luminescence features, arising maybe due to the π-π transitions.     

Structural analysis and magnetic properties of the copper(II) dicyanamide complexes [Cu2(dmphen)2(dca)4], [Cu(dmphen)(dca)(NO3)]n and [Cu(4,4-dmbpy)(H2O)(dca)2] (dca=dicyanamide; dmphen=2,9-dimethyl-1,10-phenanthroline; 4,4-dmbpy=4,4-dimethyl-2,2-bipyridine)

The preparation, crystal structures and magnetic properties of three copper(II) compounds of formulae [Cu₂(dmphen)₂(dca)₄] (1), [Cu(dmphen)(dca)(NO₃)]_n (2) and [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] (3) (dmphen=2,9-dimethyl-1,10-phenanthroline, dca=dicyanamide and 4,4^′-dmbpy=4,4^′-dimethyl-2,2^′-bipyridine) are reported. The structure of 1 consists of discrete copper(II) dinuclear units with double end-to-end dca bridges whereas that of 2 is made up of neutral uniform copper(II) chains with a single symmetrical end-to-end dca bridge. Each copper atom in 1 and 2 is in a distorted square pyramidal environment: two (1) or one (2) nitrile-nitrogen atoms from bridging dca groups, one of the nitrogen atoms of the dmphen molecule (1 and 2) and either one nitrile-nitrogen from a terminal dca ligand (1) or a nitrate-oxygen atom (2) build the equatorial plane whereas the second nitrogen atom of the heterocyclic dmphen fills the axial position (1 and 2). The copper-copper separations through double (1) and single (2) end-to-end dca bridges are 7.1337(7) (1) and 7.6617(7) (2). Compound 3 is a mononuclear copper(II) complex whose structure contains two neutral and crystallographically independent [Cu(4,4^′-dmbpy)(H₂O)(dca)₂] molecules which are packed in two different layer arrangements running parallel to the bc-plane and alternating along the a-axis. The copper atoms in both molecules have slightly distorted square pyramidal surroundings with the two nitrogen atoms of the 4,4^′-dmbpy ligand and two dca nitrile-nitrogen atoms in the basal plane and a water oxygen in the apical position. A semi co-ordinated dca nitrile-nitrogen from a neighbour unit [2.952(6) Å for Cu(2)-N] is in trans position to the apical water molecule in one of the two molecules, this feature representing part of the difference in supramolecular connections in the alternating layers referred to above. Magnetic susceptibility measurements for 1-3 in the temperature range 1.9-290 K reveal the occurrence of weak antiferromagnetic interactions through double [J=−3.3 cm⁻¹ (1), ] and single [J=−0.57 cm⁻¹ (2), ] dca bridges and across intermolecular contacts [θ=−0.07 K (3)].     

Mn(II) complexes of monoanionic bidentate chelators: X-ray crystal structures of Mn(dha)2(CH3OH)2 (Hdha = dehydroacetic acid) and [Mn(ema)2(H2O)]2 · 2H2O (Hema = 2-ethyl-3-hydroxy-4-pyrone)

This report describes synthesis and characterization of bis-ligand Mn(II) complexes of bidentate chelators: maltol (3-hydroxy-2-methyl-4-pyrone), ethylmaltol (2-ethyl-3-hydroxy-4-pyrone), 1,2-dimethyl-3-hydroxy-4-pyridinone (DMHP) and dehydroacetic acid. All four Mn(II) complexes were characterized by elemental analysis, IR, UV/Vis, EPR, cyclic voltammetry, and X-ray crystallography in cases of Mn(dha)₂(CH₃OH)₂ and [Mn(ema)₂(H₂O)]₂ · 2H₂O. The bidentate chelator plays a significant role in the solid state structure of its Mn(II) complex. For example, dha forms the monomeric complex Mn(dha)₂(CH₃OH)₂ while ethylmaltol forms the dimeric complex [Mn(ema)₂(H₂O)]₂. Because of smaller size, maltol ligands in Mn(ma)₂ are able to bridge adjacent Mn(II) centers to give a polymeric structure in solid state. Despite of the difference in their solid state structures, both Mn(ema)₂ and Mn(ma)₂ exist in solution as monomeric Mn(II) species, Mn(ema)₂(H₂O)₂ and Mn(ma)₂(H₂O)₂. This assumption is supported by the similarity in their UV/Vis spectra, EPR data and electrochemical properties. Replacing maltol with DMHP results in a decrease (by ∼100 mV) in the redox potential for the Mn(II)/Mn(III) couple, suggesting that DMHP stabilizes Mn(III) better than maltol. Since Mn(DMHP)₂(H₂O)₂ is readily oxidized to form the more stable Mn(III) complex Mn(DMHP)₃, DMHP has the potential as a chelator for removal of excess Mn(II) from patients with chronic Mn toxicity.     

A novel ferromagnetic coupling one-dimensional complex {Cu(II)(NIT3Py)2[N(CN)2]2(H2O)2}

The novel ferromagnetic coupling one-dimensional complex {Cu(NIT3Py)₂[N(CN)₂]₂(H₂O)₂} (NIT3Py=2-(3^′-pyridyl)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide) was synthesized and characterized structurally and magnetically. It crystallizes in the monoclinic space group C2/c. The Cu(II) ion is in a distorted octahedral environment. The units of {Cu(NIT3Py)₂[N(CN)₂]₂(H₂O)₂} were connected as one-dimensional structure by the intermolecular hydrogen bonds. Magnetic measurements show that there are intramolecular ferromagnetic interactions and intermolecular antiferromagnetic interactions within the chain.     

Solvent roles in metal ion coordination: the NiCl2O-solvates, NiCl2 · 4MeOH, NiCl2 · 2MeOH · 0.5dioxan and NiCl2 · 2H2O · 2dioxan

Low-temperature, single crystal X-ray structural characterisations of trans-[NiCl₂(HOMe)₄], trans-O-[Ni(MeOH)₂(μ-Cl)_(2/2)2]_(∞∣∞) · 0.5dioxan and trans-trans-[Ni(H₂O)₂Cl₂(O-dioxan-O)_(2/2)]_(∞∣∞) · dioxan are recorded, offering intriguing insights into O-donor/Ni(II) relativities. All nickel atoms in all structures are located on crystallographic inversion centres, the last two compounds being one-dimensional polymers.     

Synthesis and structure of two polymeric barium-oxydiacetates: [Ba(oda) · H2O]n and [Ba(Hoda)2]n (H2oda: oxydiacetic acid)

The reaction of barium carbonate or hydroxide with oxydiacetic acid leads to the self-assembly of two barium oxydiacetate polymers in good yield: [Ba(oda) · H₂O]_n (1) and [Ba(Hoda)₂]_n (2). The products have been characterized by elemental analysis, IR, TGA and single crystal X-ray diffraction studies. The central barium atom in each mononuclear fragment is nine-coordinate in 1 and 10-coordinate in 2. These fragments are bridged by carboxylato groups in anti-anti conformation and through H-bonds bonding interactions forming complex 3D networks.     

Syntheses and crystal structures of cyano-bridged cluster-metal layered coordination polymers [Cu(dien)]3[W4Te4(CN)12] · 9H2O and [Ni(en)(NH3)]3[W4Se4(CN)12] · 7.5H2O

Two new tetrahedral tungsten cyanide cluster compounds, [Cu(dien)]₃[W₄Te₄(CN)₁₂] · 9H₂O (1) (dien=diethylenetriamine) and [Ni(en)(NH₃)]₃[W₄Se₄(CN)₁₂] · 7.5H₂O (2) (en=ethylenediamine), were synthesized by treating aqueous solutions of the saltlike cluster compound K₆[W₄Te₄(CN)₁₂] · 5H₂O/K₆[W₄Se₄(CN)₁₂] · 6H₂O with copper(II)/nickel(II) chloride in aqueous ammonia containing dien/en. The cyano-bridged layered coordination polymeric compounds were characterized by single-crystal X-ray diffraction analysis: monoclinic, space group P2₁ for 1; trigonal, space group for 2. Structures of 1 and 2 consist of infinite neutral layers of cluster components {W₄Te₄(CN)₁₂}/{W₄Se₄(CN)₁₂} connected, one another by {Cu(dien)} or {Ni(en)(NH₃)} fragments, respectively.     

A trinuclear copper(II) complex with 2,5-pyridine-dicarboxylato bridges - [Cu3(2,5-pydc)2(Me5dien)2(H2O)2(BF4)2] · H2O: Synthesis, crystal structure and magnetic properties

A trinuclear copper(II) complex, [Cu₃(2,5-pydc)₂(Me₅dien)₂(BF₄)₂(H₂O)₂] · H₂O 1, has been constructed from 2,5-pyridine-dicarboxylato bridges (2,5-pydc²⁻) and N,N,N′,N″,N″-pentamethyl-diethylenetriamine (Me₅dien) acting as a blocking ligand. The copper ions, within the centrosymmetric trinuclear cations, are connected by two 2,5-pydc²⁻ bridges, with an intramolecular Cu···Cu separation of 8.432 Å. The central copper ion exhibits an elongated octahedral geometry, with semicoordinated ions, while the terminal ones are pentacoordinated (distorted square-pyramidal geometry). The cryomagnetic investigation of 1 reveals an antiferromagnetic coupling of the copper(II) ions (J = −5.9 cm⁻¹, H = −JS_Cu1S_Cu2 − JS_Cu2S_Cu1a).     

Synthesis, crystal structure and properties of [Cu(H2O)6][Cu2(nta)2(pyz)]·4H2O: A channeled solid with three-dimensional hydrogen-bonding network

We report the synthesis and characterization of [Cu^II(H₂O)₆][Cu^II₂(nta)₂(pyz)]·4H₂O. It consists of two molecular entities, a cation and an anion, containing divalent copper. These entities are held together by an extensive network of hydrogen-bonding to form a framework with channels (along the a-axis) housing molecules of water. The latter can be reversibly removed by evacuation at room temperature to give another crystal phase. The compound undergoes a fast solid-state reaction with KBr. Magnetic susceptibility data fit well to the sum of those of a dimer with a singlet-triplet gap of 9.21(5) K and a monomer.     

Syntheses and structures of two copper-molybdate complexes: The 3-D [Cu(4,4′-bpy)(MoO4)] and 1-D [Cu2(HDABCO)2(H2Mo8O27)] · 4H2O

Hydrothermal reaction of molybdenum oxide and copper(II) source in the presence of 4,4′-bipyridine (4,4′-bpy) afforded three-dimensional covalent framework [Cu^II(4,4′-bpy)(MoO₄)] (1), while reaction with 1,4-diazoniabicyclo[2,2,2]octane (DABCO) in place of 4,4′-bpy and addition of metal molybdenum resulted in one-dimensional chain-like compound . The copper in 1 is divalent and approximately shows trigonal bipyramidal geometry, while in 2 is monovalent and approximately shows T-shaped geometry. The structure of 1 has a three-dimensional pillar-layered framework constructed from bimetallic {CuMoO₄} layers bridged by bifunctional ligand 4,4′-bpy. Interestingly, the {CuMoO₄} layer in 1 consists of 16-membered {Cu₄Mo₄O₈} rings and 8-membered {Cu₂Mo₂O₄} rings, different from other reported {CuMoO₄} layers. The structure of 2 consists a one-dimensional chain that is attached by peripheral {Cu(HDABCO)}²⁺ units. The chain is constructed from octamolybdates through common corners.     

Microwave synthesis, spectroscopy, thermal analysis and crystal structure of an one-dimensional polymeric {[Cu(4,4′-bipy)(H2O)3(SO4)] · 2H2O}n complex

A metal organic-inorganic coordination framework formulated as {[Cu(4,4′-bipy)(H₂O)₃(SO₄)] · 2H₂O}_n (1) (where 4,4′-bipy = 4,4′-bipyridine) has been successfully prepared by microwave synthesis. The title complex has been characterized by single crystal X-ray crystallography, FT-IR spectroscopy and thermal analysis. Complex (1) is an one-dimensional (1D) polymer in which 4,4′-bipy acts as a bridging ligand supporting the formation of infinite [Cu(4,4′-bipy)(H₂O)₃(SO₄)] chains. The packing diagram shows that a 3D network is formed via hydrogen bonds. The infrared spectra and thermographic data are consistent with the chemical formula.     

Structure and magnetic properties of a tetranuclear Cu4O4 open-cubane in [Cu(L)]4·4H2O with L = (E)-N′-(2-oxy-3-methoxybenzylidene)benzohydrazide

The in-situ formed hydrazone Schiff base ligand (E)-N′-(2-oxy-3-methoxybenzylidene)benzohydrazide (L²⁻) reacts with copper(II) acetate to a tetranuclear open cubane [Cu(L)]₄ complex which crystallizes as two symmetry-independent (Z′ = 2) S₄-symmetrical molecules in different twofold special positions with a homodromic water tetramer. The two independent (A and B) open- or pseudo-cubanes with Cu₄O₄ cores of 4 + 2 class (Ruiz classification) each have three different magnetic exchange pathways leading to an overall antiferromagnetic coupling with J_1B = J_2B = −17.2 cm⁻¹, J_1A = −36.7 cm⁻¹, J_2A = −159 cm⁻¹, J_3A = J_3B = 33.5 cm⁻¹, g = 2.40 and ρ = 0.0687. The magnetic properties have been analysed using the H = −Σ_i,jJ_ij(S_iS_j) spin Hamiltonian.     

Zinc complexes of 6-methyl-2-pyridinecarboxylic acid. Crystal structure of [Zn(MeC5H3NCOO)2(H2O)] · H2O

Reaction of Zn(AcO)₂ · 2H₂O with 6-methyl-2-pyridinecarboxylic acid (L) yielded a new compound [Zn(MeC₅H₃NCOO)₂(H₂O)] · H₂O. This complex was characterised by elemental analyses, conductivity measurements, infrared, ¹H and ¹³C{¹H} NMR spectroscopies and single-crystal X-ray diffraction. The crystal structure consists of discrete molecules involving a pentacoordinated Zn atom with a geometry intermediate between a trigonal bipyramid and a square pyramid and with the two N_py atoms occupying the apical sites. Treatment of the complex [Zn(MeC₅H₃NCOO)₂(H₂O)] · H₂O with 2,2^′-bipyridine (bpy) produced [Zn(MeC₅H₃NCOO)₂(bpy)]. The metallic atom in this complex displays a distorted octahedral geometry and is coordinated to two ligands (L) via the pyridine nitrogen and the carbonyl oxygen atoms and to one 2,2^′-bypyridine (bpy).