The divIVA minicell locus of Bacillus subtilis.

The Bacillus subtilis divIVA1 mutation causes misplacement of the septum during cell division, resulting in the formation of small, circular, anucleate minicells. This study reports the cloning and sequence analysis of 2.4 kb of the B. subtilis chromosome including the divIVA locus. Three open reading frames were identified: orf, whose function is unknown; divIVA; and isoleucyl tRNA synthetase (ileS). We identified the point mutation in the divIVA1 mutant allele. Inactivation of divIVA produces a minicell phenotype, whereas overproduction of DivIVA results in a filamentation phenotype. Mutants with mutations at both of the minicell loci of B. subtilis, divIVA and divIVB, possess a minicell phenotype identical to that of the DivIVB- mutant. The DivIVA-mutants, but not the DivIVB- mutants, show a decrease in sporulation efficiency and a delay in the kinetics of endospore formation. The data support a model in which divIVA encodes the topological specificity subunit of the minCD system. The model suggests that DivIVA acts as a pilot protein, directing minCD to the polar septation sites. DivIVA also appears to be the interface between a sporulation component and MinCD, freeing up the polar septation sites for use during the asymmetric septation event of the sporulation process.     

The minCD locus of Bacillus subtilis lacks the minE determinant that provides topological specificity to cell division

A key event of the sporulation process in Bacillus subtilis is the asymmetric cell division that divides the developing cell into two unequal compartments. To examine the function of vegetative cell division genes in this developmental division, we isolated and characterized the B. subtilis counterpart to the Escherichia coli minicell operon minB, which governs correct placement of the division septum. Starting from the closely linked spo/VFlocus, we used walking methods to isolate the region of the B. subtilis chromosome proximate to the divlVB minicell locus. DNA sequence analysis found two open reading frames whose predicted products had significant identity to the E. coli MinC cell division inhibitor and the MinD ATPase activator of MinC, and disruption of minCD function generated a minicell phenotype in B. subtilis. Notably, no homologue to the E. coli MinE topological specificity element was found in the B. subtilis minCD region. The B. subtilis min genes were part of an operon transcribed from a major promoter more than 2.5 kb upstream from minC. An internal promoter immediately upstream from minC was dependent on RNA polymerase containing sigma-H and was active at the onset of sporulation. However, neither minCnor minD function was absolutely required for sporulation and, by implication, for asymmetric septum formation.     

Visualization of Penicillin-Binding Proteins during Sporulation of Streptomyces griseus

We used fluorescein-tagged β-lactam antibiotics to visualize penicillin-binding proteins (PBPs) in sporulating cultures of Streptomyces griseus. Six PBPs were identified in membranes prepared from growing and sporulating cultures. The binding activity of an 85-kDa PBP increased fourfold by 10 to 12 h of sporulation, at which time the sporulation septa were formed. Cefoxitin inhibited the interaction of the fluorescein-tagged antibiotics with the 85-kDa PBP and also prevented septum formation during sporulation but not during vegetative growth. The 85-kDa PBP, which was the predominant PBP in membranes of cells that were undergoing septation, preferentially bound fluorescein-6-aminopenicillanic acid (Flu-APA). Fluorescence microscopy showed that the sporulation septa were specifically labeled by Flu-APA; this interaction was blocked by prior exposure of the cells to cefoxitin at a concentration that interfered with septation. We hypothesize that the 85-kDa PBP is involved in septum formation during sporulation of S. griseus.     

MinCD-dependent regulation of the polarity of SpoIIIE assembly and DNA transfer

During Bacillus subtilis sporulation, the SpoIIIE DNA translocase moves a trapped chromosome across the sporulation septum into the forespore. The direction of DNA translocation is controlled by the specific assembly of SpoIIIE in the mother cell and subsequent export of DNA into the forespore. We present evidence that the MinCD heterodimer, which spatially regulates cell division during vegetative growth, serves as a forespore-specific inhibitor of SpoIIIE assembly. The deletion of minCD increases the ability of forespore-expressed SpoIIIE to assemble and translocate DNA, and causes otherwise wild-type cells to reverse the direction of DNA transfer, producing anucleate forespores. We propose that two distinct mechanisms ensure the specific assembly of SpoIIIE in the mother cell, the partitioning of more SpoIIIE molecules into the larger mother cell by asymmetric cell division and the MinCD-dependent repression of SpoIIIE assembly in the forespore. Our results suggest that the ability of MinCD to sense positional information is utilized during sporulation to regulate protein assembly differentially on the two faces of the sporulation septum.     

Changes in the Min Oscillation Pattern before and after Cell Birth

The Min system regulates the positioning of the cell division site in many bacteria. In Escherichia coli, MinD migrates rapidly from one cell pole to the other. In conjunction with MinC, MinD helps to prevent unwanted FtsZ rings from assembling at the poles and to stabilize their positioning at midcell. Using time-lapse microscopy of growing and dividing cells expressing a gfp-minD fusion, we show that green fluorescent protein (GFP)-MinD often paused at midcell in addition to at the poles, and the frequency of midcell pausing increased as cells grew longer and cell division approached. At later stages of septum formation, GFP-MinD often paused specifically on only one side of the septum, followed by migration to the other side of the septum or to a cell pole. About the time of septum closure, this irregular pattern often switched to a transient double pole-to-pole oscillation in the daughter cells, which ultimately became a stable double oscillation. The splitting of a single MinD zone into two depends on the developing septum and is a potential mechanism to explain how MinD is distributed equitably to both daughter cells. Septal pausing of GFP-MinD did not require MinC, suggesting that MinC-FtsZ interactions do not drive MinD-septal interactions, and instead MinD recognizes a specific geometric, lipid, and/or protein target at the developing septum. Finally, we observed regular end-to-end oscillation over very short distances along the long axes of minicells, supporting the importance of geometry in MinD localization.Rod-shaped bacteria, such as Escherichia coli, divide by binary fission and thus assemble their cell division apparatus (the divisome) at the cell midpoint. Tubulin-like FtsZ is the major cytoskeletal protein of the divisome (17) and assembles into a polymeric ring on the inner surface of the cytoplasmic membrane (the Z ring). Assembly and eventual contraction of the Z ring are crucial for divisome function, and thus it is not surprising that many regulatory factors control FtsZ assembly (25). Notably, two negatively acting spatial regulatory systems, the Min system and nucleoid occlusion, ensure that the Z ring is located properly at the cell midpoint (18). Whereas a major component of the nucleoid occlusion system can be deleted with no major effects on cell division (2), inactivation of the Min system causes cells to divide either at midcell or aberrantly at cell poles (27). The result of polar cell division is the formation of chromosome-free minicells.The Min system consists of three proteins, MinC, MinD, and MinE (7). MinC has two separate domains, each of which binds to FtsZ and promotes disassembly of FtsZ polymers and polymer bundles (6, 29, 30). MinC also binds to MinD, an ATPase with a carboxy-terminal amphipathic helix that binds to the membrane only when the protein is bound to ATP (11, 12). MinD also forms polymers (31). Finally, MinE is a small protein that binds to MinD and stimulates hydrolysis of its bound ATP in the presence of membranes. By doing so, MinE helps to dislodge MinD from the membrane, although MinE itself can bind to the membrane (10). The result is that MinD and MinE form zones that oscillate from one cell pole to the other, with an oscillation period of seconds to minutes, depending on a number of factors, including temperature (9, 23, 24, 34). In typical cells, MinD spends most of its time bound to the membrane at a cell pole, forming a U-shaped zone, and its transit to the opposite pole is rapid compared to its dwell time (23). MinE typically forms a ring at the edge of the MinD zone (22, 24). The direction of the oscillation is determined strongly by cell geometry (5, 35). Other factors, such as membrane phospholipid composition, also influence MinD oscillation; MinD-ATP preferentially binds anionic phospholipids, such as cardiolipin, which is enriched at cell poles (15, 21, 32).Because MinC binds to MinD, MinC oscillates in concert with MinD and therefore is present at the cell poles for longer times than anywhere else in the cell (13, 22). This sets up a gradient of MinC, with the average smallest amount of MinC at midcell at any one time. The current model is that Z rings are most likely to assemble at the trough of the MinC gradient and are discouraged from assembling at cell poles at the peak of the gradient (14). This is supported by the observation that nonring FtsZ itself oscillates from pole to pole, presumably being chased back and forth by the alternating zones of high MinC concentration (33).However, recent work in Bacillus subtilis has shed new light on the possible function of MinC on the Z ring and the divisome. B. subtilis lacks MinE and thus relies on a static MinC gradient. This is set up by the recruitment of MinC and MinD (MinCD) to the Z ring during formation of the division septum (19, 20). This seems paradoxical, as the presence of MinCD at the Z ring is predicted to destabilize it. However, in B. subtilis, Z rings containing MinCD remain functional. Therefore, MinCD seems to have an important role in preventing the immediate reassembly of Z rings at developing cell poles next to a recently used ring (4, 8).This recruitment of MinCD to the Z ring of B. subtilis prompted us to examine in more detail Min oscillations in E. coli cells undergoing septation. We hypothesized that MinCD might bind to the Z ring at later stages of septation, perhaps helping the Z ring to function by stimulation of FtsZ disassembly. Previous results with green fluorescent protein (GFP)-MinC suggested that MinC could transiently localize to the Z ring during septation (13). Consequently, we tested if MinD, the driving force of the oscillation, could also localize to the Z ring and if this localization was dependent on MinC. We also hypothesized that a more central localization of MinCD during the time of septum formation might explain how Min proteins are partitioned equitably to both daughter cells.     

The Bacillus SpoIIGA protein is targeted to sites of spore septum formation in a SpoIIE-independent manner

The process of bacterial cell division involves the assembly of a complex of proteins at the site of septation that probably provides both the structural and the cytokinetic functions required for elaboration and closure of the septal annulus. During sporulation in Bacillus subtilis , this complex of proteins is modified by the inclusion of a sporulation-specific protein, SpoIIE, which plays a direct role in gene regulation and also has a genetically separable role in determining the gross structural properties of the specialized sporulation septum. We demonstrate by both green fluorescent protein (GFP) fusions and indirect immunofluorescence microscopy that SpoIIGA, a protein required for proteolytic cleavage of pro-σ^E, is also targeted to the sporulation septum. Septal localization of SpoIIGA–GFP occurred even in the structurally abnormal septum formed by a SpoIIE null mutant. We also report the isolation of a spoIIGA homologue from Bacillus megaterium , a species in which the cells are significantly larger than those of B . subtilis . We have exploited the physical dimensions of the B . megaterium sporangium, in conjunction with wide-field deconvolution microscopy, to construct three-dimensional projections of sporulating cells. These projections indicate that SpoIIGA–GFP is initially localized in an annulus at the septal periphery and is only later localized uniformly throughout the septa. Localization was also detected in a B . subtilis spo0H null strain that fails to construct a spore septum. We propose that SpoIIGA is sequestered in the septum by an interaction with components of the septation machinery and that this interaction begins before the construction of the asymmetric septum.     

Bacillus subtilis locus encoding a killer protein and its antidote

We have isolated mutations that block sporulation after formation of the polar septum in Bacillus subtilis. These mutations were mapped to the two genes of a new locus, spoIIS. Inactivation of the second gene, spoIISB, decreases sporulation efficiency by 4 orders of magnitude. Inactivation of the first gene, spoIISA, has no effect on sporulation but it fully restores sporulation of a spoIISB null mutant, indicating that SpoIISB is required only to counteract the negative effect of SpoIISA on sporulation. An internal promoter ensures the synthesis of an excess of SpoIISB over SpoIISA during exponential growth and sporulation. In the absence of SpoIISB, the sporulating cells show lethal damage of their envelope shortly after asymmetric septation, a defect that can be corrected by synthesizing SpoIISB only in the mother cell. However, forced synthesis of SpoIISA in exponentially growing cells or in the forespore leads to the same type of morphological damage and to cell death. In both cases protection against the killing effect of SpoIISA can be provided by simultaneous synthesis of SpoIISB. The spoIIS locus is unique to B. subtilis, and since it is completely dispensable for sporulation its physiological role remains elusive.     

Localization of Cell Division Protein FtsK to the Escherichia coli Septum and Identification of a Potential N-Terminal Targeting Domain

Escherichia coli cell division protein FtsK is a homolog of Bacillus subtilis SpoIIIE and appears to act late in the septation process. To determine whether FtsK localizes to the septum, we fused three N-terminal segments of FtsK to green fluorescent protein (GFP) and expressed them in E. coli cells. All three segments were sufficient to target GFP to the septum, suggesting that as little as the first 15% of the protein is a septum-targeting domain. Localized fluorescence was detectable only in cells containing a visible midcell constriction, suggesting that FtsK targeting normally occurs only at a late stage of septation. The largest two FtsK-GFP fusions were able at least partially to complement the ftsK44 mutation in trans, suggesting that the N- and C-terminal domains are functionally separable. However, overproduction of FtsK-GFP resulted in a late-septation phenotype similar to that of ftsK44, with fluorescent dots localized at the blocked septa, suggesting that high levels of the N-terminal domain may still localize but also inhibit FtsK activity. Interestingly, under these conditions fluorescence was also sometimes localized as bands at potential division sites, suggesting that FtsK-GFP is capable of targeting very early. In addition, FtsK-GFP localized to potential division sites in cephalexin-induced and ftsI mutant filaments, further supporting the idea that FtsK-GFP can target early, perhaps by recognizing FtsZ directly. This hypothesis was supported by the failure of FtsK-GFP to localize in ftsZ mutant filaments. In ftsK44 mutant filaments, FtsA and FtsZ were usually localized to potential division sites between the blocked septa. When the ftsK44 mutation was incorporated into the FtsK-GFP fusions, localization to midcell ranged between very weak and undetectable, suggesting that the FtsK44 mutant protein is defective in targeting the septum.     

Involvement of SpoVG in hemolysis caused by Bacillus subtilis

Bacillus subtilis is a facultative anaerobic Gram-positive non-pathogenic bacterium that includes members displaying hemolytic activity. To identify the genes responsible for hemolysis, a random mariner-based transposon insertion mutant library of B. subtilis 168 was constructed. More than 20,000 colonies were screened for the hypohemolytic phenotype on blood agar plates. One mutant showed significantly less pronounced hemolytic phenotype than the wild type. DNA sequencing and Southern blot analysis showed this mutant has a single transposable element inserted into the open reading frame (ORF) of the spoVG gene; complementation of the spoVG-disrupted mutant with a wild-type copy restored its hemolytic phenotype. It was therefore concluded that the spoVG gene, which plays a role in regulating asymmetric septation during sporulation in B. subtilis, is involved in hemolysis by B. subtilis.     

Determinants for the subcellular localization and function of a nonessential SEDS protein

The Bacillus subtilis SpoVE integral membrane protein is essential for the heat resistance of spores, probably because of its involvement in spore peptidoglycan synthesis. We found that an SpoVE-yellow fluorescent protein (YFP) fusion protein becomes localized to the forespore during the earliest stages of engulfment, and this pattern is maintained throughout sporulation. SpoVE belongs to a well-conserved family of proteins that includes the FtsW and RodA proteins of B. subtilis. These proteins are involved in bacterial shape determination, although their function is not known. FtsW is necessary for the formation of the asymmetric septum in sporulation, and we found that an FtsW-YFP fusion localized to this structure prior to the initiation of engulfment in a nonoverlapping pattern with SpoVE-cyan fluorescent protein. Since FtsW and RodA are essential for normal growth, it has not been possible to identify loss-of-function mutations that would greatly facilitate analysis of their function. We took advantage of the fact that SpoVE is not required for growth to obtain point mutations in SpoVE that block the development of spore heat resistance but that allow normal protein expression and targeting to the forespore. These mutant proteins will be invaluable tools for future experiments aimed at elucidating the function of members of the SEDS (“shape, elongation, division, and sporulation”) family of proteins.     

The spoIIN279(ts) mutation affects the FtsA protein of Bacillus subtilis.

The spo-279(ts) mutation, originally thought to be located in the spoIIG operon of Bacillus subtilis, has been mapped in close proximity but outside of the spoIIG locus. This mutation defines a new gene, spoIIN, located midway between the spoIIG and the spoVE loci, and whose product is required for successful completion of the asymmetric septation step. The spoIIN locus was cloned using a combination of 'walking steps' upstream from the spoIIG region and hybridization screening of a bacteriophage lambda library. Sequencing of DNA fragments able to rescue the spoIIN279(ts) mutation revealed that the spoIIN locus is identical with the B subtilis counterpart of the Escherichia coli ftsA gene. After cloning the ftsA region from a strain containing the spoIIN279(ts) mutation we found that this mutation converts the ninth residue of the FtsA protein from serine to asparagine. The spoIIN279(ts) mutation, which is recessive, leads to filamentation during growth at 42 degrees C and causes defective formation of the sporulation septum at this non-permissive temperature. The FtsA protein is therefore required for proper cell septation, both during vegetative growth and sporulation. Possible additional roles of FtsA during sporulation are discussed.     

Morphological stages of Bacillus subtilis sporulation and resistance to fusidic acid.

During spore development of Bacillus subtilis both protein synthesis and sporulation become resistant to the antibiotic fusidic acid. This resistance develops at the time when asymmetric prespore septa are formed. Simultaneously ribosomes lose their ability to bind fusidic acid, as demonstrated by their affinity chromatography with the immobilized drug. Mutants resistant to fusidic acid during growth are oligosporogenous; their sporulation development is blocked before septum formation. These results indicate that normal ribosomes are needed for prespore septation sporulation; only after septation can protein synthesis be maintained, throughout the development period, by fusidate resistant ribosomes.     

The Bacillus subtilis soj-spo0J locus is required for a centromere-like function involved in prespore chromosome partitioning

During sporulation in Bacillus subtilis a small prespore cell is formed by an asymmetric cell division. Pre-spore chromosome partitioning occurs by a specialised mechanism in which septation precedes chromosome movement. We show that the spo0J gene is needed to specify the orientation of the chromosome at the time of polar division and to impose directionality on the subsequent transport of the remainder of the chromosome through the septum. Both phenotypes may arise by disruption of a centromere-like apparatus that anchors the oriC region of the prespore chromosome in the pole of the cell.     

The Min system is not required for precise placement of the midcell Z ring in Bacillus subtilis

In bacteria, the Min system plays a role in positioning the midcell division site by inhibiting the formation of the earliest precursor of cell division, the Z ring, at the cell poles. However, whether the Min system also contributes to establishing the precise placement of the midcell Z ring is unresolved. We show that the Z ring is positioned at midcell with a high degree of precision in Bacillus subtilis, and this is completely maintained in the absence of the Min system. Min is therefore not required for correct midcell Z ring placement in B. subtilis. Our results strongly support the idea that the primary role of the Min system is to block Z ring formation at the cell poles and that a separate mechanism must exist to ensure cell division occurs precisely at midcell.     

MinC mutants deficient in MinD- and DicB-mediated cell division inhibition due to loss of interaction with MinD, DicB, or a septal component

The min locus encodes a negative regulatory system that limits formation of the cytokinetic Z ring to midcell by preventing its formation near the poles. Of the three Min proteins, MinC is the inhibitor and prevents Z-ring formation by interacting directly with FtsZ. MinD activates MinC by recruiting it to the membrane and conferring a higher affinity on the MinCD complex for a septal component. MinE regulates the cellular location of MinCD by inducing MinD, and thereby MinC, to oscillate between the poles of the cell, resulting in a time-averaged concentration of MinCD on the membrane that is lowest at midcell. MinC can also be activated by the prophage-encoded protein DicB, which targets MinC to the septum without recruiting it first to the membrane. Previous studies have shown that the C-terminal domain of MinC is responsible for the interaction with MinD, DicB, and the septal component. In the present study, we isolated mutations in the C-terminal domain of MinC that affected its interaction with MinD, DicB, and the septal component. Among the mutations isolated, R133A and S134A are specifically deficient in the interaction with MinD, E156A is primarily affected in the interaction with DicB, and R172A is primarily deficient in the interaction with the septum. These mutations differentiate the interactions of MinC with its partners and further support the model of MinCD- and MinC-DicB-mediated cell division inhibition.     

The MinCDJ System in Bacillus subtilis Prevents Minicell Formation by Promoting Divisome Disassembly

Background

Cell division in Bacillus subtilis takes place precisely at midcell, through the action of Noc, which prevents division from occurring over the nucleoids, and the Min system, which prevents cell division from taking place at the poles. Originally it was thought that the Min system acts directly on FtsZ, preventing the formation of a Z-ring and, therefore, the formation of a complete cytokinetic ring at the poles. Recently, a new component of the B. subtilis Min system was identified, MinJ, which acts as a bridge between DivIVA and MinCD.

Methodology/Principal Findings

We used fluorescence microscopy and molecular genetics to examine the molecular role of MinJ. We found that in the absence of a functional Min system, FtsA, FtsL and PBP-2B remain associated with completed division sites. Evidence is provided that MinCDJ are responsible for the failure of these proteins to localize properly, indicating that MinCDJ can act on membrane integral components of the divisome.

Conclusions/Significance

Taken together, we postulate that the main function of the Min system is to prevent minicell formation adjacent to recently completed division sites by promoting the disassembly of the cytokinetic ring, thereby ensuring that cell division occurs only once per cell cycle. Thus, the role of the Min system in rod-shaped bacteria seems not to be restricted to an inhibitory function on FtsZ polymerization, but can act on different levels of the divisome.