Susceptibility of staphylococcal biofilms to enzymatic treatments depends on their chemical composition

Bacterial infections are serious complications after orthopaedic implant surgery. Staphylococci, with Staphylococcus epidermidis as a leading species, are the prevalent and most important species involved in orthopaedic implant-related infections. The biofilm mode of growth of these bacteria on an implant surface protects the organisms from the host’s immune system and from antibiotic therapy. Therapeutic agents that disintegrate the biofilm matrix would release planktonic cells into the environment and therefore allow antibiotics to eliminate the bacteria. An addition of a biofilm-degrading agent to a solution used for washing–draining procedures of infected orthopaedic implants would greatly improve the efficiency of the procedure and thus help to avoid the removal of the implant. We have previously shown that the extracellular staphylococcal matrix consists of a poly-N-acetylglucosamine (PNAG), extracellular teichoic acids (TAs) and protein components. In this study, we accessed the sensitivity of pre-formed biofilms of five clinical staphylococcal strains associated with orthopaedic prosthesis infections and with known compositions of the biofilm matrix to periodate, Pectinex Ultra SP, proteinase K, trypsin, pancreatin and dispersin B, an enzyme with a PNAG-hydrolysing activity. We also tested the effect of these agents on the purified carbohydrate components of staphylococcal biofilms, PNAG and TA. We found that the enzymatic detachment of staphylococcal biofilms depends on the nature of their constituents and varies between the clinical isolates. We suggest that a treatment with dispersin B followed by a protease (proteinase K or trypsin) could be capable to eradicate biofilms of a variety of staphylococcal strains on inert surfaces.     

The interaction of phage and biofilms

Biofilms present complex assemblies of micro-organisms attached to surfaces. they are dynamic structures in which various metabolic activities and interactions between the component cells occur. When phage come in contact with biofilms, further interactions occur dependent on the susceptibility of the biofilm bacteria to phage and to the availability of receptor sites. If the phage also possess polysaccharide-degrading enzymes, or if considerable cell lysis is effected by the phage, the integrity of the biofilm may rapidly be destroyed. Alternatively, coexistence between phage and host bacteria within the biofilm may develop. Although phage have been proposed as a means of destroying or controlling biofilms, the technology for this has not yet been successfully developed.     

Biofilm formation by Pseudomonas aeruginosa in solid murine tumors - a novel model system

The ability of opportunistic bacterial pathogens to grow in biofilms is decisive in the pathogenesis of chronic infectious diseases. Growth within biofilms does not only protect the bacteria against the host immune system but also from the killing by antimicrobial agents. Here, we introduce a mouse model in which intravenously administered planktonic Pseudomonas aeruginosa bacteria are enriched in transplantable subcutaneous mouse tumors. Electron microscopy images provide evidence that such bacteria reside in the tumor tissue within biofilm structures. Immunohistology furthermore demonstrated that infection of the tumor tissue elicits a host response characterized by strong neutrophilic influx. Interestingly, the biofilm defective PA14 pqsA transposon mutant formed less biofilm in vivo and was more susceptible to clearance by intravenous ciprofloxacin treatment as compared to the wild-type control. In conclusion, we have established an experimentally tractable model that may serve to identify novel bacterial and host factors important for in vivo biofilm formation and to re-evaluate bactericidal and anti-biofilm effects of currently used and novel antibacterial compounds.     

Action of antimicrobial substances produced by different oil reservoir Bacillus strains against biofilm formation

Microbial colonization of petroleum industry systems takes place through the formation of biofilms, and can result in biodeterioration of the metal surfaces. In a previous study, two oil reservoir Bacillus strains (Bacillus licheniformis T6-5 and Bacillus firmus H₂O-1) were shown to produce antimicrobial substances (AMS) active against different Bacillus strains and a consortium of sulfate-reducing bacteria (SRB) on solid medium. However, neither their ability to form biofilms nor the effect of the AMS on biofilm formation was adequately addressed. Therefore, here, we report that three Bacillus strains (Bacillus pumilus LF4—used as an indicator strain, B. licheniformis T6-5, and B. firmus H₂O-1), and an oil reservoir SRB consortium (T6lab) were grown as biofilms on glass surfaces. The AMS produced by strains T6-5 and H₂O-1 prevented the formation of B. pumilus LF4 biofilm and also eliminated pre-established LF4 biofilm. In addition, the presence of AMS produced by H₂O-1 reduced the viability and attachment of the SRB consortium biofilm by an order of magnitude. Our results suggest that the AMS produced by Bacillus strains T6-5 and H₂O-1 may have a potential for pipeline-cleaning technologies to inhibit biofilm formation and consequently reduce biocorrosion.     

The effect of mutations affecting synthesis of lipopolysaccharides and calcofluor-binding polysaccharides on biofilm formation by <Emphasis Type="Italic">Azospirillum brasilense</Emphasis>

The thickness and antigenic properties of biofilms produced by Azospirillum brasilense Sp245 and its mutants deficient in the synthesis of lipopolysaccharides (Lps) and calcofluor-binding polysaccharides (CBPS) at the interface between water and hydrophilic or hydrophobic solid surfaces were compared. The mutants deficient in acidic LpsI synthesis produce thicker biofilms on hydrophilic surfaces. Biofilms produced on hydrophobic surfaces by bacteria that are unable to synthesize CBPS are less pronounced. Defects in CBPS production in Azospirillum mutants with impaired flagellar motility can cause adverse effects on the cell ability to attach to hydrophobic and hydrophilic surfaces. The loss of the neutral LpsII antigen by the mutants capable of producing CBPS does not affect their behavior on hydrophobic surfaces, which is probably due to the compensatory increase in the total polysaccharide production. The fundamental change in the Lps structure correlates with the activation of biofilm formation by the relevant mutants on hydrophilic and hydrophobic surfaces.     

Biofilm development and enhanced stress resistance of a model,mixed-species community biofilm

Most studies of biofilm biology have taken a reductionist approach, where single-species biofilms have been extensively investigated. However, biofilms in nature mostly comprise multiple species, where interspecies interactions can shape the development, structure and function of these communities differently from biofilm populations. Hence, a reproducible mixed-species biofilm comprising Pseudomonas aeruginosa, Pseudomonas protegens and Klebsiella pneumoniae was adapted to study how interspecies interactions affect biofilm development, structure and stress responses. Each species was fluorescently tagged to determine its abundance and spatial localization within the biofilm. The mixed-species biofilm exhibited distinct structures that were not observed in comparable single-species biofilms. In addition, development of the mixed-species biofilm was delayed 1–2 days compared with the single-species biofilms. Composition and spatial organization of the mixed-species biofilm also changed along the flow cell channel, where nutrient conditions and growth rate of each species could have a part in community assembly. Intriguingly, the mixed-species biofilm was more resistant to the antimicrobials sodium dodecyl sulfate and tobramycin than the single-species biofilms. Crucially, such community level resilience was found to be a protection offered by the resistant species to the whole community rather than selection for the resistant species. In contrast, community-level resilience was not observed for mixed-species planktonic cultures. These findings suggest that community-level interactions, such as sharing of public goods, are unique to the structured biofilm community, where the members are closely associated with each other.     

Bacterial biofilms as a natural form of existence of bacteria in the environment and host organism

Advances in microscopic analysis and molecular genetics research methods promoted the acquisition of evidence that natural bacteria populations exist predominately as substrate attached biofilms. Bacteria in biofilms are able to exchange signals and display coordinated activity that is inherent to multicellular organisms. Formation of biofilm communities turned out to be one of the main survival strategies of bacteria in their ecological niche. Bacteria in attached condition in biofilm are protected from the environmental damaging factors and effects of antibacterial substances in the environment and host organism during infection. According to contemporary conception, biofilm is a continuous layer of bacterial cells that are attached to a surface and each other, and contained in a biopolymer matrix. Such bacterial communities may be composed of bacteria of one or several species, and composed of actively functioning cells as well as latent and uncultured forms. Particular attention has recently been paid to the role of biofilms in the environment and host organism. Microorganisms form biofilm on any biotic and abiotic surfaces which creates serious problems in medicine and various areas of economic activity. Currently, it is established that biofilms are one of the pathogenetic factors of chronic inflection process formation. The review presents data on ubiquity of bacteria existence as biofilms, contemporary methods of microbial community analysis, structural-functional features of bacterial biofilms. Particular attention is paid to the role of biofilm in chronic infection process formation, heightened resistance to antibiotics of bacteria in biofilms and possible mechanisms of resistance. Screening approaches for agents against biofilms in chronic infections are discussed.     

Phenotypes of non-attached Pseudomonas aeruginosa aggregates resemble surface attached biofilm

For a chronic infection to be established, bacteria must be able to cope with hostile conditions such as low iron levels, oxidative stress, and clearance by the host defense, as well as antibiotic treatment. It is generally accepted that biofilm formation facilitates tolerance to these adverse conditions. However, microscopic investigations of samples isolated from sites of chronic infections seem to suggest that some bacteria do not need to be attached to surfaces in order to establish chronic infections. In this study we employed scanning electron microscopy, confocal laser scanning microscopy, RT-PCR as well as traditional culturing techniques to study the properties of Pseudomonas aeruginosa aggregates. We found that non-attached aggregates from stationary-phase cultures have comparable growth rates to surface attached biofilms. The growth rate estimations indicated that, independently of age, both aggregates and flow-cell biofilm had the same slow growth rate as a stationary phase shaking cultures. Internal structures of the aggregates matrix components and their capacity to survive otherwise lethal treatments with antibiotics (referred to as tolerance) and resistance to phagocytes were also found to be strikingly similar to flow-cell biofilms. Our data indicate that the tolerance of both biofilms and non-attached aggregates towards antibiotics is reversible by physical disruption. We provide evidence that the antibiotic tolerance is likely to be dependent on both the physiological states of the aggregates and particular matrix components. Bacterial surface-attachment and subsequent biofilm formation are considered hallmarks of the capacity of microbes to cause persistent infections. We have observed non-attached aggregates in the lungs of cystic fibrosis patients; otitis media; soft tissue fillers and non-healing wounds, and we propose that aggregated cells exhibit enhanced survival in the hostile host environment, compared with non-aggregated bacterial populations.     

铁基纳米酶对鼠伤寒沙门菌生物被膜的影响

运用结晶紫染色定量法、生物被膜形态观察、生物被膜干重称量法、活菌定量计数法和细菌内活性氧检测法,评估氧化铁纳米酶和硫化铁纳米酶对鼠伤寒沙门菌生物被膜的影响及其机制.结果显示:鼠伤寒沙门菌S025株与这两类铁基纳米酶共孵育48h后,其生物被膜结晶紫染色吸光度值(A)、生物被膜厚度、生物被膜干重和活菌数量与未处理组相比均显著下降,活性氧水平显著上升,其中硫化铁纳米酶效果优于四氧化三铁纳米酶;在生物被膜形成后,加入铁基纳米酶处理0.5h、2h和12h,生物被膜结晶紫染色A值、生物被膜厚度、生物被膜干重和活菌数量与未处理组相比均显著下降,活性氧水平显著上升,硫化铁纳米酶效果同样优于四氧化三铁纳米酶.以上结果表明,铁基纳米酶通过调控鼠伤寒沙门菌胞内活性氧水平,不仅可以预防该菌的生物被膜形成,而且可以破坏已形成的生物被膜,本研究将有助于预防和治疗鼠伤寒沙门菌生物被膜引起的相关疾病.     

In vitro activity of eugenol against <Emphasis Type="Italic">Candida albicans</Emphasis> biofilms

Most manifestations of candidiasis are associated with biofilm formation occurring on the surfaces of host tissues and medical devices. Candida albicans is the most frequently isolated causative pathogen of candidiasis, and the biofilms display significantly increased levels of resistance to the conventional antifungal agents. Eugenol, the major phenolic component of clove essential oil, possesses potent antifungal activity. The aim of this study was to investigate the effects of eugenol on preformed biofilms, adherent cells, subsequent biofilm formation and cell morphogenesis of C. albicans. Eugenol displayed in vitro activity against C. albicans cells within biofilms, when MIC₅₀ for sessile cells was 500 mg/L. C. albicans adherent cell populations (after 0, 1, 2 and 4 h of adherence) were treated with various concentrations of eugenol (0, 20, 200 and 2,000 mg/L). The extent of subsequent biofilm formation were then assessed with the tetrazolium salt reduction assay. Effect of eugenol on morphogenesis of C. albicans cells was observed by scanning electron microscopy (SEM). The results indicated that the effect of eugenol on adherent cells and subsequent biofilm formation was dependent on the initial adherence time and the concentration of this compound, and that eugenol can inhibit filamentous growth of C. albicans cells. In addition, using human erythrocytes, eugenol showed low hemolytic activity. These results indicated that eugenol displayed potent activity against C. albicans biofilms in vitro with low cytotoxicity and therefore has potential therapeutic implication for biofilm-associated candidal infections.     

PslG,a self-produced glycosyl hydrolase,triggers biofilm disassembly by disrupting exopolysaccharide matrix

Biofilms are surface-associated communities of microorganism embedded in extracellular matrix. Exopolysaccharide is a critical component in the extracellular matrix that maintains biofilm architecture and protects resident biofilm bacteria from antimicrobials and host immune attack. However, self-produced factors that target the matrix exopolysaccharides, are still poorly understood. Here, we show that PslG, a protein involved in the synthesis of a key biofilm matrix exopolysaccharide Psl in Pseudomonas aeruginosa, prevents biofilm formation and disassembles existing biofilms within minutes at nanomolar concentrations when supplied exogenously. The crystal structure of PslG indicates the typical features of an endoglycosidase. PslG mainly disrupts the Psl matrix to disperse bacteria from biofilms. PslG treatment markedly enhances biofilm sensitivity to antibiotics and macrophage cells, resulting in improved biofilm clearance in a mouse implant infection model. Furthermore, PslG shows biofilm inhibition and disassembly activity against a wide range of Pseudomonas species, indicating its great potential in combating biofilm-related complications.     

Effects of Contact Time, Pressure, Percent Relative Humidity (%RH), and Material Type on Listeria Biofilm Adhesive Strength at a Cellular Level Using Atomic Force Microscopy (AFM)

Whereas the transfer of Listeria from surfaces to foods and vice versa has been well documented, little is known about the mechanism of bacterial transfer. The objective of this work is to gain a better understanding of the forces involved in listerial biofilms adhesion using atomic force microscopy (AFM). L. monocytogenes Scott A was grown as biofilms on stainless steel surfaces by inoculating stainless steel coupons with Listeria and incubating the coupons for 48 h at 32 °C with a diluted 1:20 tryptic soy broth. After growth, biofilms were equilibrated over saturated salt solutions at a constant relative humidity (%RH) before measurement of adhesion forces using AFM. The effects of contact time, loading force, and biofilm relative humidity (%RH) suggested that neither contact time, loading force nor biofilm %RH had a significant effect on biofilm adhesiveness at a cellular level (P > 0.05). In a second set of experiments, the influence of material type on biofilm adhesiveness was evaluated using two different colloidal probes (SiO₂ and polyethylene). Results showed that the maximum pull-off force and retraction work needed to retract the cantilever for glass (−85.42 nN and 1.610⁻¹⁵ J, respectively) were significantly lower than those of polyethylene (−113.38 nN and 2.7 × 10^–15 J, respectively; P < 0.001). The results of this study suggest that Listeria biofilms adhere more strongly to hydrophobic surfaces than hydrophilic surfaces when measured at a cellular level. These results provide important insights that could lead to new ways to remediate and avoid listerial biofilm formation in the food industry.     

Chemical defenses of seaweeds against microbial colonization

Any living or non-living surface immersed in seawaterrapidly acquires a bacterial biofilm. For living marineorganisms, biofilm formation can result in the death ofthe host, and thus there is strong evolutionary pressure formarine eukaryotes to evolve mechanisms which inhibit orcontrol the development of biofilms on their surfaces.Some marine eukaryotes are indeed successful incontrolling biofilms on their surfaces, and in manyinstances this control is achieved by the production ofinhibitory chemicals which act at or near the surface ofthe organism. In some cases these natural inhibitors aresimply toxic to bacteria. However, increasingly it appearsthat at least some of these compounds act by interferingspecifically with bacterial characteristics which effect theability of bacteria to colonize their hosts, such asattachment, surface spreading, or the production ofextracellular macromolecules. As an example, theAustralian seaweed Delisea pulchra appears tocontrol bacterial colonization by interfering with abacterial regulatory system (the acylated homoserinelactone system) that regulates several colonizationrelevant bacterial traits. Understanding how marineorganisms control specific bacterial colonization traitsshould provide us with insights into new technologies forthe control of biofilms on artificial surfaces.     

Attachment and Biofilm Formation of <Emphasis Type="Italic">Mycobacterium marinum</Emphasis> on a Hydrophobic Surface at the Air Interface

Properties of attachment of Mycobacterium marinum to hydrophobic surfaces and subsequent␣biofilm formation were investigated. Binding of M. marinum to polypropylene occured under aerobic and anaerobic/microaerophilic conditions. However, aerobic conditions were necessary for biofilms to persist. Highly non-polar organic solvents were found to efficiently remove attached bacteria from the polypropylene surface, indicating strong hydrophobic interactions between the M. marinum cell wall and the surface. Increased capsular material, occurring during stationary phase, correlated with a decrease in attachment of cells to polypropylene. A protein of approximately 40 kDa appears to be present in increased amounts during the stationary phase. The protein has been identified by LC MS/MS analysis as alanine dehydrogenase.     

Electron microscopic study of Burkholderia cepacia biofilms

Using the methods of transmission electron microscopy, the structure of the biofilms formed by the bacterium Burkholderia cepacia (clinical isolate and mutants with an increased and decreased ability to produce biofilm) were investigated. The biofilms were obtained on a liquid nutrient medium or on an abiotic surface (polystyrene). It has been demonstrated that the cultures of the studied strains differ in some morphological and functional characteristics. In biofilms, changes in the size and submicroscopic organization of all the components of bacterial cells occur. Staining biofilms with ruthenium red revealed the presence of exopolysaccharides in the intercellular space. The differences in the ultrastructure of bacterial films formed on nutrient medium and abiotic surfaces were demonstrated.     

Inhibition on <Emphasis Type="Italic">Candida albicans</Emphasis> biofilm formation using divalent cation chelators (EDTA)

Candida albicans can readily form biofilms on both inanimate and biological surfaces. In this study we investigated a means of inhibiting biofilm formation using EDTA (Ethylenediaminetetra-acetic acid), a divalent cation chelating agent, which has been shown to affect C. albicans filamentation. Candida albicans biofilms were formed in 96-well microtitre plates. Cells were allowed to adhere for 1, 2, and 4 h at 37°C, washed in PBS, and then treated with different concentrations of EDTA (0, 2.5, 25, and 250 mM). EDTA was also added to the standardized suspension prior to adding to the microtiter plate and to a preformed 24 h biofilm. All plates were then incubated at 37°C for an additional 24 h to allow for biofilm formation. The extent and characteristics of biofilm formation were then microscopically assessed and with a semi-quantitative colorimetric technique based on the use of an XTT-reduction assay. Northern blot analysis of the hyphal wall protein (HWP1) expression was also monitored in planktonic and biofilm cells treated with EDTA. Microscopic analysis and colorimetric readings revealed that filamentation and biofilm formation were inhibited by EDTA in a concentration dependant manner. However, preformed biofilms were minimally affected by EDTA (maximum of 31% reduction at 250 mM). The HWP1 gene expression was reduced in EDTA-treated planktonic and biofilm samples. These results indicate that EDTA inhibits C. albicans biofilm formation are most likely through its inhibitory effect on filamentation and indicates the potential therapeutic effects of EDTA. This compound may serve a non-toxic means of preventing biofilm formation on infections with a C. albicans biofilm etiology.     

Bacterial colonization and biofilm development on minimally processed vegetables

Bacterial biofilms have been observed and reported on food and food-processing surfaces and can contribute to increased risks for product quality and food safety. The colonization of fruit and vegetables by pectynolitic bacteria like Pseudonomas fluorescens attributable to conditions such as soft rot, can also manifest as biofilms. A developed biofilm structure can provide a protective environment for pathogens such as Listeria monocytogenes reducing the effectiveness of sanitisers and other inhibitory agents. Understanding the colonization of bacteria on leaf surfaces is essential to the development of a better understanding of the leaf ecology of vegetable products. Studies of microbial colonization of leaf surfaces have been conducted using SEM and more recently using confocal microsocpy techniques. In the current study, a Leica TCS NT laser scanning confocal microscope was used to investigate biofilm formation using vital fluorescence staining on intact vegetable leaves. Reflection contrast and fluorescence three-dimensional imaging successfully delineated bacterial and biofilm morphology without disturbing the bacterial or leaf surface structure. The results demonstrate the presence and development of biofilm on the surface of lettuce. The biofilms appeared to originate on the cuticle in distinct micro-environments such as in the natural depression of the stomata, or in the intercellular junction. Bacteria also adhered to and developed biofilm colonies within an hour of contact and with clean stainless steel surfaces. Our study investigates the progression of biofilm formation from leaf colonization, and will assist in characterising the critical mechanisms of plant/host interaction and facilitate the development of improved preservation, sanitising and packaging strategies for minimally processed vegetable products.     

Assessment of a chemostat-coupled modified Robbins device to study biofilms

The combination of a modified Robbins device (MRD) attached to the effluent line of a continuous cultivation vessel was assessed by the adhesion of planktonic bacteria maintained at a controlled growth rate. This combination of a chemostat and an MRD provides a large number of sample surfaces for monitoring both the formation and control of biofilms over extended periods of time. This apparatus was used to monitor the colonization of two soil isolates,Pseudomonas fluorescens (EX101) andPseudomonas putida (EX102) onto silastic rubber surfaces. At a similar _rel, both bacteria attached to the silastic, howeverP. fluorescens formed confluent, dense biofilms in less than 24 h, whereasP. putida adhered as single cells or microcolonies after the same period. The metabolic activity, measured by INT-formazan formation, was similar for both organisms with a peak at 6 h of colonization and a subsequent decrease after 24 h. Long term colonization studies ofP. fluorescens produced a population of greater than 9.5 log cfu cm^–2 at 28 days demonstrating the advantages of the chemostat-MRD association. This technique proved to be successful for studying bacterial adhesion and biofilm formation in tubular devices by bacterial populations at controlled and low growth rates.     

Destruction of Deinococcus geothermalis biofilm by photocatalytic ALD and sol-gel TiO2 surfaces

The aim of the present work was to explore possibilities of photocatalytic TiO₂ coating for reducing biofilms on non-living surfaces. The model organism, Deinococcus geothermalis, known to initiate growth of durable, colored biofilms on machine surfaces in the paper industry, was allowed to form biofilms on stainless steel, glass and TiO₂ film coated glass or titanium. Field emission electron microscopy revealed that the cells in the biofilm formed at 45°C under vigorous shaking were connected to the surface by means of numerous adhesion threads of 0.1--0.3 μm in length. Adjacent cells were connected to one another by threads of 0.5--1 μm in length. An ultrastructural analysis gave no indication for the involvement of amorphous extracellular materials (e.g., slime) in the biofilm. When biofilms on photocatalytic TiO₂ surfaces, submerged in water, were exposed to 20 W h m⁻² of 360 nm light, both kinds of adhesion threads were completely destroyed and the D. geothermalis cells were extensively removed (from >10⁷ down to below 10⁶ cells cm⁻²). TiO₂ films prepared by the sol-gel technique were slightly more effective than those prepared by the ALD technique. Doping of the TiO₂ with sulfur did not enhance its biofilm-destroying capacity. The results show that photocatalytic TiO₂ surfaces have potential as a self-cleaning technology for warm water using industries.