Application of a fiber-reinforced continuum theory to multiple deformations of the annulus fibrosus.

Accurate tissue stress predictions for the annulus fibrosus are essential for understanding the factors that cause or contribute to disc degeneration and mechanical failure. Current computational models used to predict in vivo disc stresses utilize material laws for annular tissue that are not rigorously validated against experimental data. Consequently, predictions of disc stress resulting from physical activities may be inaccurate and therefore unreliable as a basis for defining mechanical-biologic injury criteria. To address this need we present a model for the annulus as an isotropic ground substance reinforced with two families of collagen fibers, and an approach for determining the material constants by simultaneous consideration of multiple experimental data sets. Two strain energy functions for the annulus are proposed and used in the theory to derive the constitutive equations relating the stress to pure stretch deformations. These equations are applied to four distinct experimental protocols and the material constants are determined from a simultaneous, nonlinear regression analysis. Good agreement between theory and experiment is achieved when the invariants are included within multiple, separate exponentials in the strain energy function.     

Large strain behaviour of brain tissue in shear: some experimental data and differential constitutive model.

In this paper, some experimental measurements of the behaviour of bovine brain tissue under large shear strains in vitro are reported, and a constitutive model which is consistent with the data is developed. It was determined that brain tissue is not strain-time separable, showing slower relaxation at higher strains, and that the stresses in shear are not linear with increasing shear strain. The new constitutive model is a differential model, including both an "elastic" term, of the Mooney type and a nonlinear viscoelastic term. The latter allows for the change in relaxation behaviour with strain, by modifying an upper convected multimode Maxwell model with a damping function. The model shows good agreement with the experimental shear results and could be used to describe other types of data.     

Hypo-elastic model for lung parenchyma

A simple, isotropic, elastic constitutive model for the spongy tissue in lung is formulated from the theory of hypo-elasticity. The model is shown to exhibit a pressure dependent behavior that has been interpreted in the literature as indicating extensional anisotropy. In contrast, we show that this behavior arises naturally from an analysis of isotropic hypo-elastic invariants and is a result of non-linearity, not anisotropy. The response of the model is determined analytically for several boundary value problems used for material characterization. These responses give insight into both the material behavior as well as admissible bounds on parameters. The model predictions are compared with published experimental data for dog lung.     

A finite element study of invariant-based orthotropic constitutive equations in the context of myocardial material parameter estimation

A previous study investigated a number of invariant-based orthotropic and transversely isotropic constitutive equations for their suitability to fit three-dimensional simple shear mechanics data of passive myocardial tissue. The study was based on the assumption of a homogeneous deformation. Here, we extend the previous study by performing an inverse finite element material parameter estimation. This ensures a more realistic deformation state and material parameter estimates. The constitutive relations were compared on the basis of (i) ‘goodness of fit’: how well they fit a set of six shear deformation tests and (ii) ‘variability’: how well determined the material parameters are over the range of experiments. These criteria were utilised to discuss the advantages and disadvantages of the constitutive relations. It was found that a specific form of the polyconvex type as well as the exponential Fung-type equations were most suitable for modelling the orthotropic behaviour of myocardium under simple shear.     

Effects of shear rate on rouleau formation in simple shear flow

A kinetic equation for rouleau formation in a simple shear flow is derived, based on several assumptions. These are (a) colliding rouleaux stick to one another with a certain probability to form a single rouleau; (b) simultaneous collisions between more than two rouleaux are negligible; (c) rouleaux are broken by a viscous force exerted by the suspending fluid on the surfaces of rouleaux; (d) when a rouleau is broken by viscous forces, only two fragments are formed. Based on a simple mathematical model, collision rate, sticking probability and degradation rate are obtained as functions of applied shear rate. From the solution of the kinetic equation, the average size of rouleaux is obtained as a function of time with shear rate as a parameter. It is shown that the average size of rouleaux increases monotonically with increasing time and tends to an equilibrium size. The average size of rouleaux in a dynamical equilibrium decreases monotonically with increasing shear rate and tends to one cell as shear rate approaches infinity. It is also found that the initial rate of rouleau formation increases with increasing shear rate at very low shear rate, but this trend is reversed at higher shear rates. The theoretical results are compared quantitatively with experimental data.     

A new constitutive model for multi-layered collagenous tissues

Collagenous tissues such as the aneurysmal wall or the aorta are multi-layered structures with the mean fibre alignments distinguishing one layer from another. A constitutive representation of the multiple collagen layers is not yet developed, and hence the aim of the present study. The proposed model is based on the constitutive theory of finite elasticity and is characterized by an anisotropic strain-energy function which takes the material structure into account. The passive tissue behaviour is modelled and the related mechanical response is assumed to be dominated by elastin and collagen. While elastin is modelled by the neo-Hookean material the constitutive response of collagen is assumed to be transversely isotropic for each individual layer and based on an exponential function. The proposed constitutive function is polyconvex which ensures material stability. The model has five independent material parameters, each of which has a clear physical interpretation: the initial stiffnesses of the collagen fabric in the two principal directions, the shear modulus pertaining to the non-collagenous matrix material, a parameter describing the level of nonlinearity of the collagen fabric, and the angle between the principal directions of the collagen fabric and the reference coordinate system. An extension-inflation test of the adventitia of a human femoral artery is simulated by means of the finite element method and an error function is minimized by adjusting the material parameters yielding a good agreement between the model and the experimental data.     

A three-dimensional constitutive model for the stress relaxation of articular ligaments

A new nonlinear constitutive model for the three-dimensional stress relaxation of articular ligaments is proposed. The model accounts for finite strains, anisotropy, and strain-dependent stress relaxation behavior exhibited by these ligaments. The model parameters are identified using published uniaxial stress–stretch and stress relaxation data on human medial collateral ligaments (MCLs) subjected to tensile tests in the fiber and transverse to the fiber directions (Quapp and Weiss in J Biomech Eng Trans ASME 120:757–763, 1998; Bonifasi-Lista et al. in J Orthop Res 23(1):67–76, 2005). The constitutive equation is then used to predict the nonlinear elastic and stress relaxation response of ligaments subjected to shear deformations in the fiber direction and transverse to the fiber direction, and an equibiaxial extension. A direct comparison with stress relaxation data collected by subjecting human MCLs to shear deformation in the fiber direction is presented in order to demonstrate the predictive capabilities of the model.     

A nonlinear elastic description of cell preferential orientations over a stretched substrate

The active response of cells to mechanical cues due to their interaction with the environment has been of increasing interest, since it is involved in many physiological phenomena, pathologies, and in tissue engineering. In particular, several experiments have shown that, if a substrate with overlying cells is cyclically stretched, they will reorient to reach a well-defined angle between their major axis and the main stretching direction. Recent experimental findings, also supported by a linear elastic model, indicated that the minimization of an elastic energy might drive this reorientation process. Motivated by the fact that a similar behaviour is observed even for high strains, in this paper we address the problem in the framework of finite elasticity, in order to study the presence of nonlinear effects. We find that, for a very large class of constitutive orthotropic models and with very general assumptions, there is a single linear relationship between a parameter describing the biaxial deformation and \(\cos ^2\theta _{\mathrm{eq}}\), where \(\theta _{\mathrm{eq}}\) is the orientation angle of the cell, with the slope of the line depending on a specific combination of four parameters that characterize the nonlinear constitutive equation. We also study the effect of introducing a further dependence of the energy on the anisotropic invariants related to the square of the Cauchy–Green strain tensor. This leads to departures from the linear relationship mentioned above, that are again critically compared with experimental data.

     

Constitutive Model of Erythrocyte Membranes with Distributions of Spectrin Orientations and Lengths

We present an analytical hyperelastic constitutive model of the red blood cell (erythrocyte) membrane based on recently improved characterizations of density and microscopic structure of its spectrin network from proteomics and cryo-electron tomography. The model includes distributions of both orientations and natural lengths of spectrin and updated copy numbers of proteins. By applying finite deformation to the spectrin network, we obtain the total free energy and stresses in terms of invariants of shear and area deformation. We generalize an expression of the initial shear modulus, which is independent of the number of molecular orientations within the network and also derive a simplified version of the model. We apply the model and its simplified version to analyze micropipette aspiration computationally and analytically and explore the effect of local cytoskeletal density change. We also explore the discrepancies among shear modulus values measured using different experimental techniques reported in the literature. We find that the model exhibits hardening behavior and can explain many of these discrepancies. Moreover, we find that the distribution of natural lengths plays a crucial role in the hardening behavior when the correct copy numbers of proteins are used. The initial shear modulus values we obtain using our current model (5.9–15.6 pN/μm) are close to the early estimates (6–9 pN/μm). This new, to our knowledge, constitutive model establishes a direct connection between the molecular structure of spectrin networks and constitutive laws and also defines a new picture of a much denser spectrin network than assumed in prior studies.     

Two-dimensional stress-strain relationship for canine pericardium

Two-dimensional pseudoelastic mechanical properties of the canine pericardium were investigated in vitro. The pericardium was assumed to be orthotropic. The material symmetry axis was determined a priori and aligned with the stretching axis. Various biaxial stretching tests were then performed and a set of data covering a wide range of strains was constructed. This complete data set was fitted to a new exponential type constitutive model, and a set of true material constants was determined for each specimen. Using the constitutive model and the true material constants, the results from constant lateral force tests and constant lateral displacement tests were predicted and compared with experiment.     

Myocardial material parameter estimation: a comparison of invariant based orthotropic constitutive equations

This study investigated a number of invariant based orthotropic and transversely isotropic constitutive equations for their suitability to fit three-dimensional simple shear mechanics data of passive myocardial tissue.

A number of orthotropic laws based on Green strain components and one microstructurally based law have previously been investigated to fit experimental measurements of stress-strain behaviour. Here we extend this investigation to include several recently proposed functional forms, i.e. invariant based orthotropic and transversely isotropic constitutive relations.

These laws were compared on the basis of (i) ‘goodness of fit’: how well they fit a set of six shear deformation tests, (ii) ‘variability’: how well determined the material parameters are over the range of experiments. These criteria were utilised to discuss the advantages and disadvantages of the constitutive laws.

It was found that a specific form of the polyconvex type as well as the exponential Fung-type law from the previous study were most suitable for modelling the orthotropic behaviour of myocardium under simple shear.     

An orthotropic viscoelastic model for the passive myocardium: continuum basis and numerical treatment

This study deals with the viscoelastic constitutive modeling and the respective computational analysis of the human passive myocardium. We start by recapitulating the locally orthotropic inner structure of the human myocardial tissue and model the mechanical response through invariants and structure tensors associated with three orthonormal basis vectors. In accordance with recent experimental findings the ventricular myocardial tissue is assumed to be incompressible, thick-walled, orthotropic and viscoelastic. In particular, one spring element coupled with Maxwell elements in parallel endows the model with viscoelastic features such that four dashpots describe the viscous response due to matrix, fiber, sheet and fiber-sheet fragments. In order to alleviate the numerical obstacles, the strictly incompressible model is altered by decomposing the free-energy function into volumetric-isochoric elastic and isochoric-viscoelastic parts along with the multiplicative split of the deformation gradient which enables the three-field mixed finite element method. The crucial aspect of the viscoelastic formulation is linked to the rate equations of the viscous overstresses resulting from a 3-D analogy of a generalized 1-D Maxwell model. We provide algorithmic updates for second Piola–Kirchhoff stress and elasticity tensors. In the sequel, we address some numerical aspects of the constitutive model by applying it to elastic, cyclic and relaxation test data obtained from biaxial extension and triaxial shear tests whereby we assess the fitting capacity of the model. With the tissue parameters identified, we conduct (elastic and viscoelastic) finite element simulations for an ellipsoidal geometry retrieved from a human specimen.     

A non-linearly elastic, finite deformation analysis applicable to the static mechanics of excised lungs

Continuum mechanical analyses of lung behavior require a constitutive relationship for the parenchyma. For a homogeneous, isotropic, elastic material this relationship is dependent upon the strain invariants. Furthermore, the sparse data available indicate that the relationship should be exponential in form. A suitable equation has previously appeared in the literature. In this paper it is developed for application to whole lung experiments.     

A continuum model for root growth

This paper presents a study of a simple one-dimensional continuum model for growth of the plant root. A fundamental constitutive equation is derived. The model is studied by means of various special cases of increasing complexity. Asymptotic expansions are used to derive approximate solutions to the equation of the model under the fundamental assumption that cell wall thickness is small in comparison with the diameter of the cell. The basic results of the study may be summarized as follows. The observed growth pattern of the root cannot be modelled by a mechanical system whose properties are independent of position on the root. The observed pattern can be modelled by a simple mechanical system in which, for example, cell wall yield stress first decreases and then increases. Two fundamental observations are made based on the modelling study. The first is that any mechanical model must take into account the convective displacement from the tip of points along the root. The second is that in describing growth, data on cell wall mechanical properties are meaningless without corresponding data on cell water potential, and vice versa.     

Counting phylogenetic invariants in some simple cases.

An informal degrees of freedom argument is used to count the number of phylogenetic invariants in cases where we have three or four species and can assume a Jukes-Cantor model of base substitution with or without a molecular clock. A number of simple cases are treated and in each the number of invariants can be found. Two new classes of invariants are found: non-phylogenetic cubic invariants testing independence of evolutionary events in different lineages, and linear phylogenetic invariants which occur when there is a molecular clock. Most of the linear invariants found by Cavender (1989, Molec. Biol. Evol. 6, 301-316) turn out in the Jukes-Cantor case to be simple tests of symmetry of the substitution model, and not phylogenetic invariants.     

Shape optimization in unsteady blood flow: a numerical study of non-Newtonian effects

This paper presents a numerical study of non-Newtonian effects on the solution of shape optimization problems involving unsteady pulsatile blood flow. We consider an idealized two dimensional arterial graft geometry. Our computations are based on the Navier-Stokes equations generalized to non-Newtonian fluid, with the modified Cross model employed to account for the shear-thinning behavior of blood. Using a gradient-based optimization algorithm, we compare the optimal shapes obtained using both the Newtonian and generalized Newtonian constitutive equations. Depending on the shear rate prevalent in the domain, substantial differences in the flow as well as in the computed optimal shape are observed when the Newtonian constitutive equation is replaced by the modified Cross model. By varying a geometric parameter in our test case, we investigate the influence of the shear rate on the solution.     

Biaxial mechanical response of bioprosthetic heart valve biomaterials to high in-plane shear

Utilization of novel biologically-derived biomaterials in bioprosthetic heart valves (BHV) requires robust constitutive models to predict the mechanical behavior under generalized loading states. Thus, it is necessary to perform rigorous experimentation involving all functional deformations to obtain both the form and material constants of a strain-energy density function. In this study, we generated a comprehensive experimental biaxial mechanical dataset that included high in-plane shear stresses using glutaraldehyde treated bovine pericardium (GLBP) as the representative BHV biomaterial. Compared to our previous study (Sacks, JBME, v.121, pp. 551-555, 1999), GLBP demonstrated a substantially different response under high shear strains. This finding was underscored by the inability of the standard Fung model, applied successfully in our previous GLBP study, to fit the high-shear data. To develop an appropriate constitutive model, we utilized an interpolation technique for the pseudo-elastic response to guide modification of the final model form. An eight parameter modified Fung model utilizing additional quartic terms was developed, which fitted the complete dataset well. Model parameters were also constrained to satisfy physical plausibility of the strain energy function. The results of this study underscore the limited predictive ability of current soft tissue models, and the need to collect experimental data for soft tissue simulations over the complete functional range.