Interaction of the third helix of Antennapedia homeodomain and a phospholipid monolayer, studied by ellipsometry and PM-IRRAS at the air-water interface

The penetratin peptide, a 16 amino acid sequence extracted from Antennapedia homeodomain, is able to translocate across a neural cell membrane through an unknown mechanism, most likely a non-specific interaction with membrane lipids. Beyond its potential application as vector targeting small hydrophilic molecules and enabling them to reach a cell nucleus, this observation raises intriguing questions concerning the physico-chemistry of peptide-lipid interactions. Here we present a study of the role of lipid surface pressure and head charge on the mechanism of interaction. This was performed using optical techniques: surface infrared spectroscopy and ellipsometry, applied to a monolayer of phospholipids deposited at the air-water interface. Determination of the structure and orientation of peptides and lipids (separately or together) evidenced that electrostatic rather than amphiphilic interactions determine the peptide adsorption and its action on lipids.     

Effect of monolayer lipid charges on the structure and orientation of protein VAMP1 at the air-water interface

SNARE proteins are implicated in membrane fusion during neurotransmission and peptide hormone secretion. Relatively little is known about the molecular interactions of their trans- and juxtamembrane domains with lipid membranes. Here, we report the structure and the assembling behavior of one of the SNARE proteins, VAMP1/synaptobrevin1 incorporated in a lipid monolayer at an air-water interface which mimics the membrane environment. Our results show that the protein is extremely sensitive to surface pressure as well as the lipid composition. Monolayers of proteins alone or in the presence of the neutral phospholipid DMPC underwent structural transition from α-helix to β-sheet upon surface compression. In contrast, the anionic phospholipid DMPG inhibited this transition in a concentration-dependent manner. Moreover, the orientation of the proteins was highly sensitive to the charge density of the lipid layers. Thus, the structure of VAMP1 is clearly controlled by protein-lipid interactions.     

Direct real‐time imaging of protein adsorption onto hydrophilic and hydrophobic surfaces

Atomic force microscopy has been used to follow in real time the adsorption from solution of two of the gliadin group of wheat seed storage proteins onto hydrophilic (mica) and hydrophobic (graphite) surfaces. The liquid cell of the microscope was used initially to acquire images of the substrate under a small quantity of pure solvent (1% acetic acid). Continuous imaging as an injection of gliadin solution entered the liquid cell enabled the adsorption process to be followed in situ from zero time. For ω‐gliadin, a monolayer was formed on the mica substrate during a period of ～2000 s, with the protein molecules oriented in parallel to the mica surface. In contrast, the ω‐gliadin had a relatively low affinity for the graphite substrate, as demonstrated by slow and weak adsorption to the surface. With γ‐gliadin, random deposition onto the mica surface was observed forming monodispersed structures, whereas on the graphite surface, monolayer islands of protein were formed with the protein molecules in a perpendicular orientation. Sequential adsorption experiments indicated strong interactions between the two proteins that, under certain circumstances, caused alterations to the surface morphologies of preadsorbed species. The results are relevant to our understanding of the interactions of proteins within the hydrated protein bodies of wheat grain and how these determine the processing properties of wheat gluten and dough. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 74–84, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Determination of the contribution of the myristoyl group and hydrophobic amino acids of recoverin on its dynamics of binding to lipid monolayers

It has been postulated that myristoylation of peripheral proteins would facilitate their binding to membranes. However, the exact involvement of this lipid modification in membrane binding is still a matter of debate. Proteins containing a Ca(2+)-myristoyl switch where the extrusion of their myristoyl group is dependent on calcium binding is best illustrated by the Ca(2+)-binding recoverin, which is present in retinal rod cells. The parameters responsible for the modulation of the membrane binding of recoverin are still largely unknown. This study was thus performed to determine the involvement of different parameters on recoverin membrane binding. We have used surface pressure measurements and PM-IRRAS spectroscopy to monitor the adsorption of myristoylated and nonmyristoylated recoverin onto phospholipid monolayers in the presence and absence of calcium. The adsorption curves have shown that the myristoyl group and hydrophobic residues of myristoylated recoverin strongly accelerate membrane binding in the presence of calcium. In the case of nonmyristoylated recoverin in the presence of calcium, hydrophobic residues alone are responsible for its much faster monolayer binding than myristoylated and nonmyristoylated recoverin in the absence of calcium. The infrared spectra revealed that myristoylated and nonmyristoylated recoverin behave very different upon adsorption onto phospholipid monolayers. Indeed, PM-IRRAS spectra indicated that the myristoyl group allows a proper orientation and organization as well as faster and stronger binding of myristoylated recoverin to lipid monolayers compared to nonmyristoylated recoverin. Simulations of the spectra have allowed us to postulate that nonmyristoylated recoverin changes conformation and becomes hydrated at large extents of adsorption as well as to estimate the orientation of myristoylated recoverin with respect to the monolayer plane. In addition, adsorption measurements and electrophoresis of trypsin-treated myristoylated recoverin in the presence of zinc or calcium demonstrated that recoverin has a different conformation but a similar extent of monolayer binding in the presence of such ions.     

Meet me on the other side: trans-bilayer modulation of a model voltage-gated ion channel activity by membrane electrostatics asymmetry

While it is accepted that biomembrane asymmetry is generated by proteins and phospholipids distribution, little is known about how electric changes manifested in a monolayer influence functional properties of proteins localized on the opposite leaflet. Herein we used single-molecule electrophysiology and investigated how asymmetric changes in the electrostatics of an artificial lipid membrane monolayer, generated oppositely from where alamethicin--a model voltage-gated ion channel--was added, altered peptide activity. We found that phlorizin, a membrane dipole potential lowering amphiphile, augmented alamethicin activity and transport features, whereas the opposite occurred with RH-421, which enhances the monolayer dipole potential. Further, the monolayer surface potential was decreased via adsorption of sodium dodecyl sulfate, and demonstrated that vectorial modification of it also affected the alamethicin activity in a predictive manner. A new paradigm is suggested according to which asymmetric changes in the monolayer dipole and surface potential extend their effects spatially by altering the intramembrane potential, whose gradient is sensed by distantly located peptides.     

Interaction of amyloid beta-(1-40) peptide with model membranes

The amyloid beta (1-40) peptide (A beta) is the main component of amyloid deposits found in the brain of patients afflicted with Alzheimer's disease. After treatment with hexafluoroisopropanol, commercial A beta is readily soluble in water and buffers at pH 7.4 and has an irregular secondary structure. The adsorption of A beta to the water-air interface and to the surface of the dipalmitoylphosphatidylethanolamine monolayer at a surface pressure pi close to zero leads to an increase in pressure up to 17 mN/m. When being adsorbed, the molecules of the peptide occupy a part of the monolayer surface, which leads to the compression of lipid molecules forming the monolayer. Further compression of the monolayer composed of the molecules of the lipid and peptide leads to the extrusion of the peptide from the monolayer. If the lipid monolayer is preliminarily (prior to the addition of the peptide to the liquid phase) compressed to pi = 30 mN/m, no adsorption of the peptide to the monolayer occurs. No changes in the structure of the dipalmitoylphosphatidylethanolamine monolayer were detected by the sliding X-ray diffraction method, indicating the absence of specific interactions. The method of reflection and absorption infrared spectroscopy makes it possible to determine the conformation of the adsorbed peptide and its orientation in the lipid monolayer. It was found that A beta has the conformation of a beta-fold oriented parallel to the interface, as it is the case with the adsorption of peptide molecules to the lipid monolayer at pi < 30 mN/m and upon adsorption to the interface that is not occupied by the lipid.     

Parameters modulating the maximum insertion pressure of proteins and peptides in lipid monolayers

The lipid monolayer model membrane is useful for studying the parameters responsible for protein and peptide membrane binding. Different approaches have been used to determine the extent of protein and peptide binding to lipid monolayers. This review focuses on the use of the “maximum insertion pressure” (MIP) to estimate the extent of protein and peptide penetration in lipid monolayers. The MIP data obtained with different proteins and peptides have been reviewed and discussed which allowed to draw conclusions on the parameters modulating the monolayer binding of proteins and peptides. In particular, secondary structure components such as amphipathic α-helices of proteins and peptides as well as electrostatic interactions play important roles in monolayer binding. The MIPs have been compared to the estimated lateral pressure of biomembranes which allowed to evaluate the possible association between proteins or peptides with natural membranes. For example, the MIP of a membrane-anchored protein with a glycosylphosphatidylinositol (GPI) was found to be far below the estimated lateral pressure of biomembranes. This allowed us to conclude that this protein is probably unable to penetrate the membrane and should thus be hanged at the membrane surface by use of its GPI lipid anchor. Moreover, the values of MIP obtained with myristoylated and non-myristoylated forms of calcineurin suggest that the myristoyl group does not contribute to monolayer binding. However, the acylation of a peptide resulted in a large increase of MIP. Finally, the physical state of lipid monolayers can have a strong effect on the values of MIP such that it is preferable to perform measurements with lipids showing a single physical state. Altogether the data show that the measurement of the maximum insertion pressure provides very useful information on the membrane binding properties of proteins and peptides although uncertainties must be provided to make sure the observed differences are significant.     

Interactions of Bax and tBid with Lipid Monolayers

The release of cytochrome c from mitochondria to the cytosol is a crucial step of apoptosis that involves interactions of Bax and tBid proteins with the mitochondrial membrane. We investigated Bax and tBid interactions with (i) phosphatidylcholine (PC) monolayer as the main component of the outer leaflet of the outer membrane, (ii) with phosphatidylethanolamine (PE) and phosphatidylserine (PS) that are present in the inner leaflet and (iii) with a mixed PC/PE/Cardiolipin (CL) monolayer of the contact sites between the outer and inner membranes. These interactions were studied by measuring the increase of the lipidic monolayer surface pressure induced by the proteins. Our measurements suggest that tBid interacts strongly with the POPC/DOPE/CL, whereas Bax interaction with this monolayer is about 12 times weaker. Both tBid and Bax interact moderately half as strongly with negatively charged DOPS and non-lamellar DOPE monolayers. TBid also slightly interacts with DOPC. Our results suggest that tBid but not Bax interacts with the PC-containing outer membrane. Subsequent insertion of these proteins may occur at the PC/PE/CL sites of contact between the outer and inner membranes. It was also shown that Bax and tBid being mixed in solution inhibit their insertion into POPC/DOPE/CL monolayer. The known 3-D structures of Bax and Bid allowed us to propose a structural interpretation of these experimental results.     

Lipid demixing and protein-protein interactions in the adsorption of charged proteins on mixed membranes

The adsorption free energy of charged proteins on mixed membranes, containing varying amounts of (oppositely) charged lipids, is calculated based on a mean-field free energy expression that accounts explicitly for the ability of the lipids to demix locally, and for lateral interactions between the adsorbed proteins. Minimization of this free energy functional yields the familiar nonlinear Poisson-Boltzmann equation and the boundary condition at the membrane surface that allows for lipid charge rearrangement. These two self-consistent equations are solved simultaneously. The proteins are modeled as uniformly charged spheres and the (bare) membrane as an ideal two-dimensional binary mixture of charged and neutral lipids. Substantial variations in the lipid charge density profiles are found when highly charged proteins adsorb on weakly charged membranes; the lipids, at a certain demixing entropy penalty, adjust their concentration in the vicinity of the adsorbed protein to achieve optimal charge matching. Lateral repulsive interactions between the adsorbed proteins affect the lipid modulation profile and, at high densities, result in substantial lowering of the binding energy. Adsorption isotherms demonstrating the importance of lipid mobility and protein-protein interactions are calculated using an adsorption equation with a coverage-dependent binding constant. Typically, at bulk-surface equilibrium (i.e., when the membrane surface is "saturated" by adsorbed proteins), the membrane charges are "overcompensated" by the protein charges, because only about half of the protein charges (those on the hemispheres facing the membrane) are involved in charge neutralization. Finally, it is argued that the formation of lipid-protein domains may be enhanced by electrostatic adsorption of proteins, but its origin (e.g., elastic deformations associated with lipid demixing) is not purely electrostatic.     

Structural and membrane binding analysis of the Phox homology domain of Bem1p: basis of phosphatidylinositol 4-phosphate specificity

Phox homology (PX) domains, which have been identified in a variety of proteins involved in cell signaling and membrane trafficking, have been shown to interact with phosphoinositides (PIs) with different affinities and specificities. To elucidate the structural origin of the diverse PI specificity of PX domains, we determined the crystal structure of the PX domain from Bem1p that has been reported to bind phosphatidylinositol 4-phosphate (PtdIns(4)P). We also measured the membrane binding properties of the PX domain and its mutants by surface plasmon resonance and monolayer techniques and calculated the electrostatic potentials for the PX domain in the absence and presence of bound PtdIns(4)P. The Bem1p PX domain contains a signature PI-binding site optimized for PtdIns(4)P binding and also harbors basic and hydrophobic residues on the membrane-binding surface. The membrane binding of the Bem1p PX domain is initiated by nonspecific electrostatic interactions between the cationic membrane-binding surface of the domain and anionic membrane surfaces, followed by the membrane penetration of hydrophobic residues. Unlike other PX domains, the Bem1p PX domain has high intrinsic membrane penetrating activity in the absence of PtdIns(4)P, suggesting that the partial membrane penetration may occur before specific PtdIns(4)P binding and last after the removal of PtdIns(4)P under certain conditions. This structural and functional study of the PtdIns(4)P-binding Bem1p PX domain provides new insight into the diverse PI specificities and membrane-binding mechanisms of PX domains.     

Lateral mobility of phospholipids in the external and internal leaflets of normal and hereditary spherocytic human erythrocytes

The lateral diffusion coefficients (D) and the mobile fractions of the fluorescent phospholipid N-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)phosphatidylethanolamine (NBD-PE) and of membrane proteins labelled with fluorescein isothiocyanate, were measured by fluorescence photobleaching recovery on erythrocytes from healthy persons and from a hereditary spherocytosis patient. Measurements of lipid probe mobility were performed on ghosts labelled by NBD-PE exclusively at the external monolayer, or at both sides of the membrane. Our results indicate the following: (1) The mean values and the temperature dependence of D are different at the external and internal membrane leaflets. (2) In both normal and HS ghosts the mobile fraction of NBD-PE in the external monolayer does not depend significantly on temperature. On the other hand, the mobile fraction in the internal monolayer is reduced as the temperature is decreased. (3) At low temperatures, the mobile fraction of NBD-PE in the internal monolayer of spherocytic ghosts is significantly lower than the mobile fraction in the internal monolayer of normal ghosts. (4) No differences were observed between the mobilities of membrane proteins in normal and in spherocytic ghosts. However, differences were observed between the two cell populations in the temperature-dependence of the intrinsic fluorescence of unlabelled membrane proteins. The implications of these results for membrane phospholipid asymmetry and for cytoskeletal interactions with the internal lipid monolayer are discussed.     

Comparison of VILIP-1 and VILIP-3 Binding to Phospholipid Monolayers

The neuronal calcium sensor proteins Visinin-like Proteins 1 (VILIP-1) and 3 (VILIP-3) are effectors of guanylyl cyclase and acetyl choline receptors, and transduce calcium signals in the brain. The “calcium-myristoyl” switch, which involves a post-translationally added myristoyl moiety and calcium binding, is thought to regulate their membrane binding capacity and therefore, play a critical role in their mechanism of action. In the present study, we investigated the effect of membrane composition and solvent conditions on the membrane binding mechanisms of both VILIPs using lipid monolayers at the air/buffer interface. Results based on comparison of the adsorption kinetics of the myristoylated and non-myristoylated proteins confirm the pivotal role of calcium and the exposed myristol moiety for sustaining the membrane-bound state of both VILIPs. However, we also observed binding of both VILIP proteins in the absence of calcium and/or myristoyl conjugation. We propose a two-stage membrane binding mechanism for VILIP-1 and VILIP-3 whereby the proteins are initially attracted to the membrane surface by electrostatic interactions and possibly by specific interactions with highly negatively charged lipids head groups. The extrusion of the conjugated myristoyl group, and the subsequent anchoring in the membrane constitutes the second stage of the binding mechanism, and ensures the sustained membrane-bound form of these proteins.     

A shortcut method for evaluation of protein deposition onto the membrane surface in crossflow ultrafiltration

In this study, a procedure for quantifying the surface deposition of proteins in crossflow ultrafiltration has been developed. The procedure consists of determining the protein adsorption behavior onto the membrane surface from a few dynamic measurements performed in a nonfiltration and a filtration mode, and evaluating the concentration polarization (CP) layer thickness based on the adsorption data. To predict the interdependence between the protein adsorption and CP, a simplified mathematical model has been formulated. The model was used to assess the protein adsorption and thus yield reduction in the ultrafiltration process at different protein concentration in the solution. As a case study, ultrafiltration of aqueous solutions of BSA and lysozyme (LYZ) was examined on a polyethersulfone membrane with the molecular weight cutoff of 10 or 100 kDa. The protein concentration in the solutions varied within a relatively low concentration range, i.e. below 10 mg mL^?1, characteristic for solvent exchange between sequential operations of protein purification by chromatography and extraction. Both proteins markedly differed in the mechanism of surface deposition; for BSA hydrophobic interactions were suggested to be dominant, whereas in case of LYZ electrostatic interactions contributed the most to the deposition mechanism. The effect of additives of the protein solutions, i.e. inorganic salts, PEG, and urea depended on the adsorption mechanism and was also specific for each protein. Nevertheless, the proposed procedure performed well in the evaluation of surface deposition and yield reduction, regardless of the protein type and its solvent environment.     

Divalent cations and redox conditions regulate the molecular structure and function of visinin-like protein-1

The NCS protein Visinin-like Protein 1 (VILIP-1) transduces calcium signals in the brain and serves as an effector of the non-retinal receptor guanylyl cyclases (GCs) GC-A and GC-B, and nicotinic acetyl choline receptors (nAchR). Analysis of the quaternary structure of VILIP-1 in solution reveals the existence of monomeric and dimeric species, the relative contents of which are affected but not exclusively regulated by divalent metal ions and Redox conditions. Using small-angle X-ray scattering, we have investigated the low resolution structure of the calcium-bound VILIP-1 dimer under reducing conditions. Scattering profiles for samples with high monomeric and dimeric contents have been obtained. The dimerization interface involves residues from EF-hand regions EF3 and EF4.Using monolayer adsorption experiments, we show that myristoylated and unmyristoylated VILIP-1 can bind lipid membranes. The presence of calcium only marginally improves binding of the protein to the monolayer, suggesting that charged residues at the protein surface may play a role in the binding process.In the presence of calcium, VILIP-1 undergoes a conformational re-arrangement, exposing previously hidden surfaces for interaction with protein partners. We hypothesise a working model where dimeric VILIP-1 interacts with the membrane where it binds membrane-bound receptors in a calcium-dependent manner.     

Imaging of the membrane surface of MDCK cells by atomic force microscopy.

The membrane surface of polarized renal epithelial cells (MDCK cells) grown as a monolayer was imaged with the atomic force microscope. The surface topography of dried cells determined by this approach was consistent with electron microscopy images previously reported. Fixed and living cells in aqueous medium gave more fuzzy images, likely because of the presence of the cell glycocalix. Treatment of living cells with neuraminidase, an enzyme that partly degrades the glycocalix, allowed sub-micrometer imaging. Protruding particles, 10 to 60 nm xy size, occupy most of the membrane surface. Protease treatment markedly reduced the size of these particles, indicating that they corresponded to proteins. Tip structure effects were probably involved in the exaggerated size of imaged membrane proteins. Although further improvements in the imaging conditions, including tip sharpness, are required, atomic force microscope already offers the unique possibility to image proteins at the membrane surface of living cells.     

Zein adsorption to hydrophilic and hydrophobic surfaces investigated by surface plasmon resonance

Zein, the prolamine of corn, has been investigated for its potential as an industrial biopolymer. In previous research, zein was plasticized with oleic acid and formed into sheets/films. Physical properties of films were affected by film structure and controlled in turn by zein-oleic acid interactions. The nature of such interactions is not well understood. Thus, protein-fatty acid interactions were investigated in this work by the use of surface plasmon resonance (SPR). Zein adsorption from 75% aqueous 2-propanol solutions, 0.05% to 0.5% w/v, onto hydrophilic and hydrophobic self-assembled monolayers (SAMs) formed by 11-mercaptoundecanoic acid and 1-octanethiol, respectively, was monitored by high time resolution SPR. Initial adsorption rate and ultimate surface coverage increased with bulk protein concentration for both surfaces. The initial slope of plotted adsorption isotherms was higher on 11-mercaptoundecanoic acid than on 1-octanethiol, indicating higher zein affinity for hydrophilic SAMs. Also, maximum adsorption values were higher for zein on hydrophilic than on hydrophobic SAMs. Flushing off loosely bound zein in the SPR cell allowed estimation of apparent monolayer values. Differences in monolayer values for hydrophobic and hydrophilic surfaces were explained in terms of zein adsorption footprint.     

HIV-1, lipid rafts, and antibodies to liposomes: implications for anti-viral-neutralizing antibodies

The human immunodeficiency virus type 1 (HIV-1) is an enveloped virus with a lipid bilayer that contains several glycoproteins that are anchored in, or closely associated with, the membrane surface. The envelope proteins have complex interactions with the lipids both on the host cells and on the target cells. The processes of budding from host cells and entry into target cells occur at sites on the plasma membrane, known as lipid rafts, that represent specialized regions that are rich in cholesterol and sphingolipids. Although the envelope glycoproteins are antigenic molecules that potentially might be used for development of broadly neutralizing antibodies in a vaccine to HIV-1, the development of such antibodies that have broad specificities against primary field isolates of virus has been largely thwarted to date by the ability of the envelope proteins to evade the immune system through various mechanisms. In this review, the interactions of HIV-1 with membrane lipids are summarized. Liposomes are commonly used as models for understanding interactions of proteins with membrane lipids; and liposomes have also been used both as carriers for vaccines, and as antigens for induction of antibodies to liposomal lipids. The possibility is proposed that liposomal lipids, or liposome-protein combinations, could be useful as antigens for inducing broadly neutralizing antibodies to HIV-1.     

X-ray scattering studies of model lipid membrane interacting with purothionin provide support for a previously proposed mechanism of membrane lysis

Thionins, ubiquitous plant toxins, are believed to act by lysing the membrane of pathogenic organisms. Several competing mechanisms were proposed for the lysis of phospholipid membranes by the toxins. In order to study in more detail the proposed mechanisms and possibly resolve among the competing proposals, the interactions of purothionins with a model lipid membrane in the form of a monolayer were studied. The monolayer formed at the air-water interface was studied by synchrotron X-ray reflectivity and grazing incidents diffraction methods. The model membrane was composed of 90:10 mol% DPPC:DPPS (dipylmitoyl phosphatidylcholine:dipylmitoyl phosphatidylserine). The protein interaction with the monolayer disturbs the in-plane and out-of-plane order of phospholipids, increases the amount of the liquid phase of the monolayer, and increases the average surface area per alkyl chain. The results indicate that the protein is bound only transiently, and after ~4 h most of the properties of the monolayer are reminiscent of the pure DPPC monolayer suggesting partial withdrawal of DPPS. Obtained electron density distributions perpendicular to the membrane interface do not show any significant contribution from the adsorbed proteins, further supporting the withdrawal hypothesis.     

Kinetics of phospholipid insertion into monolayers containing the lung surfactant proteins SP-B or SP-C

The lung surfactant proteins SP-B and SP-C are pivotal for fast and reversible lipid insertion at the air/liquid interface, a prerequisite for functional lung activity. We used a model system consisting of a preformed monolayer at the air/liquid interface supplemented with surfactant protein SP-B or SP-C and unilamellar vesicles injected into the subphase of a film balance. The content of SP-B or SP-C was similar to that found in lung lavage. In order to elucidate distinct steps of lipid insertion, we measured the time-dependent pressure increase as a function of the initial surface pressure, the temperature and the phosphatidylglycerol content by means of surface tension measurements and scanning force microscopy (SFM). The results of the film balance study are indicative of a two-step mechanism in which initial adsorption of vesicles to the protein-containing monolayer is followed by rupture and integration of lipid material. Furthermore, we found that vesicle adsorption on a preformed monolayer supplemented with SP-B or SP-C is strongly enhanced by negatively charged lipids as provided by DPPG and the presence of Ca2+ ions in the subphase. Hence, long-range electrostatic interactions are thought to play an important role in attracting vesicles to the surface, being the initial step in replenishment of lipid material. While insertion into the monolayer is independent of the type of protein SP-B or SP-C, initial adsorption is faster in the presence of SP-B than SP-C. We propose that the preferential interaction between SP-B and negatively charged DPPG leads to accumulation of negative charges in particular regions, causing strong adhesion between DPPG-containing vesicles and the monolayer mediated by Ca2+ ions, which eventually causes flattening and rupture of attached liposomes as observed by in situ SFM.