Tn10 tet operator mutations affecting Tet repressor recognition.

The effect of single base pair alterations of the Tn10 encoded tet operator on recognition of Tet repressor was studied in vivo using a repressor titration system and in vitro by dissociation rate determinations of the respective complexes. Both methods reveal that the two operators, O1 and O2, which are in a tandem arrangement in the wild type, are recognized with a two-fold different affinity when separated. Studies on synthetic operator sequences indicate that the Tet repressor binds with higher affinity to the non-palindromic O2 wildtype than to the respective palindromic sequences. The in vivo repressor titration system links the expression of lacZ to the affinity of tet operator to Tet repressor. It was used to isolate tet operator mutations with reduced affinity to the repressor. The in vivo and in vitro obtained results with these mutants agree quantitatively and indicate, that the GC base pairs at positions 2, 6, and 8 are involved in interaction with the Tet repressor. Their importance for recognition decreases in that order. Transitions at position 7 of the tet operator show smaller effects on recognition than transversions.     

Quantitative analysis of Tn10 Tet repressor binding to a complete set of tet operator mutants.

A saturating oligonucleotide-directed mutagenesis of both tet operators in the tet regulatory sequence was performed yielding mutants with four identical base pair exchanges at equivalent positions in the four tet operator half sides. The mutants were cloned between bipolar lacZ and galK indicator genes on a multicopy plasmid allowing the quantitative analysis of their effects in vivo. In the absence of Tet repressor the mutations lead to considerably different expression levels of both genes. They are discussed with respect to the promoter consensus sequences. In particular, the -10 region of the in vivo active tetPR2 promoter is unambiguously defined by these results. In the presence of Tet repressor most of the mutants exhibit a lower affinity for that protein as determined quantitatively by their reduced expression levels. In general, tet operator recognition is most strongly affected by alterations of base pairs near the center of the palindromic sequence. The most important position is the third base pair, followed by base pairs two, four, five and six, the latter showing similar effects as base pair one. At each position, the four possible base pairs show different affinities for Tet repressor. They are discussed according to their exposure of H-bond donors and -acceptors in the major and minor grooves of the B-DNA. The results are in agreement with major groove contacts at positions two, three and five. At position four a low potential correlation of efficiencies with the H-bonding in the minor groove is found, while mutations at position six seem to influence repressor binding by other mechanisms.     

Contacts between Tet repressor and tet operator revealed by new recognition specificities of single amino acid replacement mutants.

We have analyzed the DNA binding properties of Tet-repressor mutants with single amino acid residue replacements at eight positions within the alpha-helix-turn-alpha-helix DNA-binding motif. A saturation mutagenesis of Gln38, Pro39, Thr40, Tyr42, Trp43 and His44 in the second alpha-helix was performed; in addition, several substitutions of Thr27 and Arg28 in the first alpha-helix were constructed. The abilities of these mutant repressors to bind a set of 16 operator variants were determined and revealed 23 new binding specificities. All repressor mutants with DNA-binding activity were inducible by tetracycline, while mutants lacking binding activity were trans-dominant over the wild-type. All mutant proteins were present at the same intracellular steady-state concentrations as the wild-type. These results suggest the structural integrity of the mutant repressors. On the basis of the new recognition specificities, five contacts between a repressor monomer and each operator half-site and the chemical nature of these repressor-operator interactions are proposed. We suggest that Arg28 contacts guanine of the G.C base-pair at operator position 2 with two H-bonds, Gln38 binds adenine of the A.T base-pair at position 3 with two H-bonds, and the methyl group of Thr40 participates in a van der Waals' contact with cytosine of the G.C base-pair at position 6 of tet operator. A previously unrecognized type of interaction is proposed for Pro39, which inserts its side-chain between the methyl groups of the thymines of T.A and A.T base-pairs at positions 4 and 5. Computer modeling of these proposed contacts reveals that they are possible using the canonical structures of the helix-turn-helix motif and B-DNA. These contacts suggest an inverse orientation of the Tet repressor helix-turn-helix with respect to the operator center as compared with non-inducible repressor-operator complexes, and are supported by similar contacts of other repressor-operator complexes.     

Tet repressor-tet operator contacts probed by operator DNA-modification interference studies

Contacts between tet operator DNA and Tet repressor protein are characterized by modification interference studies. The modified DNA fragments are separated into fractions with high, intermediate and low affinities for Tet repressor by polyacrylamide gel electrophoresis. Ethylation of the phosphates with N-ethylnitrosourea reveals 12 contacts of a repressor dimer to tet operator. Eight of these contacts appear to be important for Tet repressor binding, as judged by the strong interference at these positions, while four contacts are probably less important. All of the phosphate contacts are located on the same side of the B-DNA structure. The sequences of tet operators proposed to interact with the recognition alpha-helix of Tet repressor are TCTATC in three cases and CCTATC in one case. After methylation of N-7 with dimethylsulfate, strong interference is observed at the guanine residues at positions +/- 2. None of the N-7 functions of other guanine residues seems to be involved in tight contacts to Tet repressor. Tet repressor subunits form identical phosphate and guanine N-7 contacts with each half side of the two tet operators indicating twofold dyad symmetry of the complexes. Attempts to analyze the methylation interference at the adenine N-3 sites reveal different results for the operators. Modification of DNA fragments with diethylpyrocarbonate yields hypersensitive sites in the tet operators, indicating different local DNA structures. Carbethoxylation interference studies confirm the contacts at the purines found by methylation interference. All of the sequence-specific protein-DNA contacts detected in this study are centered at the inside four base-pairs in each tet operator half side. The contacts are discussed with respect to the structure of the repressor-operator complex.     

Amino acids determining operator binding specificity in the helix-turn-helix motif of Tn10 Tet repressor.

Each of 22 amino acids in the proposed alpha-helix-turn-alpha-helix operator binding motif of the Tn10 encoded Tet repressor was replaced by alanine and one residue was replaced by valine to determine their role in tet operator recognition by a 'loss of contact' analysis with 16 operator variants. One class of amino acids consisting of T27 and R28 in the first alpha-helix and L41, Y42, W43 and H44 in the recognition alpha-helix are quantitatively most important for wild-type operator binding. These residues are probably involved in the structural architecture of the motif. A second class of residues is quantitatively less important for binding, but determines specificity by forming base pair specific contacts to three positions in tet operator. This property is most clearly demonstrated for Q38 and P39 and to a lesser extent for T40 at the N-terminus of the recognition alpha-helix. The contacted operator base pairs indicate that the N-terminus of the recognition alpha-helix is located towards the palindromic center in the repressor-operator complex. Although the orientation of the recognition alpha-helix in the Tet repressor-tet operator complex is inversed as compared with the lambda- and 434 repressor-operator complexes, the reduced operator binding of the TA27 mutation in the first alpha-helix suggests that the hydrogen bonding networks connecting the two alpha-helices may be similar in these proteins.(ABSTRACT TRUNCATED AT 250 WORDS)     

Trp scanning analysis of Tet repressor reveals conformational changes associated with operator and anhydrotetracycline binding.

We analysed the conformational states of free, tet operator-bound and anhydrotetracycline-bound Tet repressor employing a Trp-scanning approach. The two wild-type Trp residues in Tet repressor were replaced by Tyr or Phe and single Trp residues were introduced at each of the positions 162-173, representing part of an unstructured loop and the N-terminal six residues of alpha-helix 9. All mutants retained in vivo inducibility, but anhydrotetracycline-binding constants were decreased up to 7.5-fold when Trp was in positions 169, 170 and 173. Helical positions (168-173) differed from those in the loop (162-167) in terms of their fluorescence emission maxima, quenching rate constants with acrylamide and anisotropies in the free and tet operator-complexed proteins. Trp fluorescence emission decreased drastically upon atc binding, mainly due to energy transfer. For all proteins, either free, tet operator bound or anhydrtetracycline-bound, mean fluorescence lifetimes were determined to derive quenching rate constants. Solvent-accessible surfaces of the respective Trp side chains were calculated and compared with the quenching rate constants in the anhydrotetracycline-bound complexes. The results support a model, in which residues in the loop become more exposed, whereas residues in alpha-helix 9 become more buried upon the induction of TetR by anhydrotetracycline.     

Tryptophan in alpha-helix 3 of Tet repressor forms a sequence-specific contact with tet operator in solution

The Tn10-encoded Tet repressor contains two tryptophan residues at positions 43 and 75. The typical tryptophan fluorescence is decreased upon binding of tet operator. The Tet repressor gene was engineered to replace either or both of the Trp codons by Phe codons. The resulting single tryptophan mutants are called F43 and F75 and the double mutant F43F75. The mutant proteins were purified to homogeneity. They recognize tet operator DNA only in the absence of the inducer tetracycline, indicating an intact tertiary structure of the engineered proteins. F75 and wild-type bind tet operator with the same association constant. The association constants of F43 and F43F75 with tet operator are about 3 orders of magnitude smaller. This indicates that Trp43 is important for tet operator recognition. Trp43 fluorescence is completely quenched in the complex with tet operator DNA while Trp75 remains unaffected. Binding to nonspecific DNA leads only to a 40% decrease of Trp43 fluorescence. This is interpreted as the contribution of the changed environment while the complete quench reflects a tight sequence-specific contact of tryptophan 43 to tet operator DNA. Trp43 is solvent-exposed, while Trp75 is buried in the hydrophobic interior of the protein. These results are discussed in light of the alpha-helix turn-alpha-helix DNA binding motif deduced from homology to other repressor proteins.     

The roles of residues 5 and 9 of the recognition helix of Lac repressor in lac operator binding

We constructed expression libraries for Lac repressor mutants with amino acid exchanges in positions 1, 2, 5 and 9 of the recognition helix. We then analysed the interactions of residues 5 and 9 with operator variants bearing single or multiple symmetric base-pair exchanges in positions 3, 4 and 5 of the ideal fully symmetric lac operator. We isolated 37 independent Lac repressor mutants with five different amino acids in position 5 of the recognition helix that exhibit a strong preference for particular residues in position 2 and, to a lesser extent, in position 1 of the recognition helix. Our results suggest that residue 5 of the recognition helix (serine 21) contributes to the specific recognition of base-pair 4 of the lac operator. They further suggest that residue 9 of the recognition helix (asparagine 25) interacts non-specifically with a phosphate of the DNA backbone, possibly between base-pairs 2 and 3.     

A threonine to alanine exchange at position 40 of Tet repressor alters the recognition of the sixth base pair of tet operator from GC to AT.

The tet operators of two naturally evolved tetracycline resistance determinants differ by a G.C to A.T transition at the sixth base pair. This mutation prevents heterologous recognition of these tet operators by their respective two Tet repressor proteins. The amino acid side chains responsible for this sequence-specific distinction of operators were determined. For this purpose in vitro recombinants of the two tetR genes were constructed. Restriction sites were introduced by oligonucleotide-directed mutagenesis in both genes followed by the exchange of different coding segments between them. The encoded chimeric Tet repressor proteins were expressed and their operator recognition specificity was scored in vivo. Exchanging gradually smaller coding segments led finally to a single amino acid exchange in both genes at position 40 of the primary structures. Each Tet repressor containing Thr at this position recognizes the G.C operator while those with Ala recognize the A.T operator regardless of the rest of the sequences. This result demonstrates clearly that the amino acid 40 of Tet repressor contacts and recognizes base pair 6 of tet operator. Sterical interference of the large Thr side chain with the methyl group of A.T and a possible involvement of the hydroxyl in hydrogen bonding to the operator are discussed as the molecular basis of this differentiation between A.T and G.C base pairs.     

Tet repressor binding induced curvature of tet operator DNA.

Tet repressor dimer binds to two tet operator sites spaced by 30 bp in the Tn10 encoded tet regulatory DNA. The effect of repressor binding on the gel mobility of circular permutated DNA fragments containing either one or both operator sequences is reported. The EcoRI induced bending of DNA is used to compare the results with other protein binding induced structural perturbations of DNA. Tet repressor bends a DNA fragment with a single tet operator to an angle of 42 degrees +/- 7 degrees. The apparent bend angle of DNA fragments containing the tandem tet operator arrangement occupied by two Tet repressor dimers turns out to be 52 degrees +/- 9 degrees. These results are interpreted with respect to the end to end distances of the bent DNA fragments. They indicate that either the intervening tet regulatory DNA between the operators or the bound operator sequences themselves contain additional perturbations from the canonical B-DNA structure. This finding is discussed in the light of previously obtained results from CD, neutron scattering, and electrooptical studies.     

Functional roles of amino acid residues involved in forming the alpha-helix-turn-alpha-helix operator DNA binding motif of Tet repressor from Tn10.

The Tn10 derived Tet repressor contains an amino acid segment with high homology to the alpha-helix-turn-alpha-helix motif (HTH) of other DNA binding proteins. The five most conserved amino acids in HTH are probably involved in structural formation of the motif. Their functional role was probed by saturation mutagenesis yielding 95 single amino acid replacement mutants of Tet repressor. Their binding efficiencies to tet operator were quantitatively determined in vivo. All functional mutants contain amino acid substitutions consistent with their proposed role in a HTH. In particular, only the two smallest amino acids (serine, glycine) can substitute a conserved alanine in the proposed first alpha-helix without loss of activity. The last position of the first alpha-helix, the second position in the turn, and the fourth position in the second alpha-helix require mostly hydrophobic residues. The proposed C-terminus of the first alpha-helix is supported by a more active asparagine compared to glutamine replacement mutant of the wt leucine residue. The turn is located close to the protein surface as indicated by functional lysine and arginine replacements for valine. A glycine residue at the first position in the turn can be replaced by any amino acid yielding mutants with at least residual tet operator affinity. A structural model of the HTH of Tet repressor is presented.     

Specificities of three tight-binding Lac repressors.

Tight binding mutants of Lac repressor exhibit complex repression phenomena. In this work, in vivo Lac operator binding of three such mutants of E. coli Lac repressor (X86: ser 61-leu, l12: pro 3-tyr and the double mutant l12X86: pro 3-tyr, ser 61-leu) was analyzed. Repression of beta-galactosidase synthesis controlled by ideal lac operator and its 27 symmetric operator variants containing each possible base-pair at each single half-operator position in the presence of the tight-binding Lac repressor mutants was determined. The average increase of repression with all operator variants was about 3 fold with the X86 mutant. It was about 4 fold with the l12 mutant and about 2 fold with the double mutant l12X86 as compared to wildtype Lac repressor. The X86 mutant showed the same increase of affinity to all operator variants, whereas the l12 and l12X86 mutants exhibited lower repression with some variants than with most others. These results suggest that the X86 mutant has gained no additional specificity. In contrast the l12 mutant and the l12X86 mutant exhibit a relaxed specificity for certain base pairs in positions 1 and 3 of lac operator. This suggests that the extreme N-terminus of Lac repressor may interact with the inner base-pairs in the minor groove.     

Crystallographic analysis of Lac repressor bound to natural operator O1

Previous structures of Lac repressor bound to DNA used a fully symmetric "ideal" operator sequence that is missing the central G-C base-pair present in the three natural operator sequences. Here we have determined the X-ray crystal structure of a dimeric Lac repressor bound to a 22 base-pair DNA with the natural operator O1 sequence and the anti-inducer ONPF, at 4.0 A resolution. The natural operator is bent in the same way as the symmetric sequence, due to the binding of the hinge helices of the repressor to the minor groove at the central GCGG sequence of O1. Comparison of the structures of the repressor bound to the natural and symmetric operators shows very similar overall structures, with only slight rearrangements of the headpiece domains of the repressor. Analysis of crystals with iodinated DNA shows that the operator is uniquely positioned and allows for the sequence registration of the DNA relative to the repressor to be determined. The kink in the operator is centered between the left half-site and the central G-C base-pair of O1. Our results are most consistent with a previously proposed model in which, relative to the complex with the symmetric operator, the repressor accommodates binding to the natural operator sequence by shifting the position of the right headpiece by one base-pair step towards the center of O1.     

Characterization of the interaction of the glp repressor of Escherichia coli K-12 with single and tandem glp operator variants.

The glp operons of Escherichia coli are negatively controlled by the glp repressor. Comparison of the repressor-binding affinities for consensus and altered consensus operators in vivo showed that all base substitutions at positions 3, 4, 5, and 8 from the center of the palindromic operator caused a striking decrease in repressor binding. Substitutions at other positions had a severe to no effect on repressor binding, depending on the base substitution. The results obtained indicate that the repressor binds with highest affinity to operators with the half-site WATKYTCGWW, where W is A or T, K is G or T, and Y is C or T. Strong cooperative binding of the repressor to tandem operators was demonstrated in vivo. Cooperativity was maximal when two 20-bp operators were directly repeated or when 2 bp separated the two operators. Cooperativity decreased with the deletion of 2 bp or the addition of 4 bp between the individual operators. Cooperativity was eliminated with a 6-bp insertion between the operators.     

Repression of the E coli recA gene requires at least two LexA protein monomers

To analyze the DNA binding domain of E coli LexA repressor and to test whether the repressor binds as a dimer to DNA, negative dominant lexA mutations affecting the binding domain have been isolated. A large number of amino acid substitutions between amino acid positions 39 and 46 were introduced using cassette mutagenesis. Mutants defective in DNA binding were identified and then examined for dominance to lexA+. A number of substitutions weakened repressor function partially, whereas other substitutions led to a repressor with no demonstrable activity and a defective dominant phenotype. Since the LexA binding site has dyad symmetry, we infer that this dominance results from interaction of monomers of wild-type LexA protein with mutant monomers and that an oligomeric form of repressor binds to operator. The binding of LexA protein to operator DNA was investigated further using a mutant protein, LexA408, which recognizes a symmetrically altered operator mutant but not wild-type operator. A mixture of mutant LexA408 and LexA+ proteins, but neither individual protein, bound to a hybrid recA operator consisting of mutant and wild-type operator half sites. These results suggest that at least 1 LexA protein monomer interacts with each operator half site. We discuss the role of LexA oligomer formation in binding of LexA to operator DNA.