Identification of the region responsible for fibril formation in the CAD domain of caspase-activated DNase

Caspase-activated DNase (CAD) has a compact domain at its N-terminus (CAD domain, 87 amino acid residues), which comprises one alpha-helix and five beta-strands forming a single sheet. The CAD domain of CAD (CAD-CD) forms amyloid fibrils containing alpha-helix at low pH in the presence of salt. To obtain insights into the mechanism of amyloid fibril formation, we identified the peptide region essential for fibril formation of CAD-CD and the region responsible for the salt requirement. We searched for these regions by constructing a series of deletion and point mutants of CAD-CD. Fibril formation by these CAD-CD mutants was examined by fluorescence analysis of thioflavin T and transmission electron microscopy. C-Terminal deletion and point mutation studies revealed that an aromatic residue near the C-terminus (Trp81) is critical for fibril formation. In addition, the main chain conformation of the beta5 strand, which forms a hydrophobic core with Trp81, was found to be important for the fibril formation by CAD-CD. The N-terminal 30 amino acid region containing two beta-strands was not essential for fibril formation. Rather, the N-terminal region was found to be responsible for the requirement of salt for fibril formation.     

Amyloidogenic potential of alpha-chymotrypsin in different conformational states

Amyloid fibril formation is widely believed to be a generic property of polypeptide chains. In the present study, alpha-chymotrypsin, a well-known serine protease has been driven toward these structures by the use of two different conditions involving (I) high temperature, pH 2.5, and (II) low concentration of trifluoroethanol (TFE), pH 2.5. A variety of experimental methods, including fluorescence emission, dynamic quenching, steady-state fluorescence anisotropy, far-UV circular dichroism, nuclear magnetic resonance spectroscopy, and dynamic light scattering were employed to characterize the conformational states of alpha-chymotrypsin that precede formation of amyloid fibrils. The structure formed under Condition I was an unfolded monomer, whereas an alpha-helical rich oligomer was induced in Condition II. Both the amyloid aggregation-prone species manifested a higher solvent exposure of hydrophobic and aromatic residues compared with the native state. Upon incubation of the protein in these conditions for 48 h, amyloid-like fibrils were formed with diameters of about 10-12 nm. In contrast, at neutral pH and low concentration of TFE, a significant degree of amorphous aggregation was observed, suggesting that charge neutralization of acidic residues in the amyloid core region has a positive influence on amyloid fibril formation. In summary, results presented in this communication suggest that amyloid fibrils of alpha-chymotrypsin may be obtained from a variety of structurally distinct conformational ensembles highlighting the critical importance of protein evolution mechanisms related to prevention of protein misfolding.     

Induction of AApoAII amyloidosis by various heterogeneous amyloid fibrils

Preformed amyloid fibrils accelerate conformational changes of amyloid precursor proteins and result in rapid extension of amyloid fibrils in vitro. We injected various kinds of amyloid fibrils into mice with amyloidogenic apoAII gene (Apoa2(C)). The most severe amyloid depositions were detected in the tissues of mice injected with mouse AApoAII(C) amyloid fibrils. Mild amyloid depositions were also detected in the tissues of mice that were injected with other types of fibrils, including synthetic peptides and recombinant proteins. However, no amyloid depositions were found in mice that were injected with non-amyloid fibril proteins. These results demonstrated that a common structure of amyloid fibrils could serve as a seed for amyloid fibril formation in vivo.     

Template-directed self-assembly and growth of insulin amyloid fibrils

The formation of amyloid aggregates in tissue is a pathological feature of many neurodegenerative diseases and type II diabetes. Amyloid deposition, the process of amyloid growth by the association of individual soluble amyloid molecules with a pre-existing amyloid template (i.e., plaque), is known to be critical for amyloid formation in vivo. The requirement for a natural amyloid template, however, has made amyloid deposition study difficult and cumbersome. In the present work, we developed a novel, synthetic amyloid template by attaching amyloid seeds covalently onto an N-hydroxysuccinimide-activated surface, where insulin was chosen as a model amyloidogenic protein. According to ex situ atomic force microscopy observations, insulin monomers in solution were deposited onto the synthetic amyloid template to form fibrils, like hair growth. The fibril formation on the template occurred without lag time, and its rate was highly accelerated than in the solution. The fibrils were long, over 2 mum, and much thinner than those in the solution, which was caused by limited nucleation sites on the template surface and lack of lateral twisting between fibrils. According to our investigations using thioflavin T-induced fluorescence, birefringent Congo red binding, and circular dichroism, fibrils grown on the template were identified to be amyloids that formed through a conformational rearrangement of insulin monomers upon interaction with the template. The amyloid deposition rate followed saturation kinetics with respect to insulin concentration in the solution. The characteristics of amyloid deposition on the synthetic template were in agreement with previous studies performed with human amyloid plaques. It is demonstrated that the synthetic amyloid template can be used for the screening of inhibitors on amyloid deposition in vitro.     

Conformational stability of amyloid fibrils of beta2-microglobulin probed by guanidine-hydrochloride-induced unfolding

Although the stability of globular proteins has been studied extensively, that of amyloid fibrils is scarcely characterized. Beta2-microglobulin (beta2-m) is a major component of the amyloid fibrils observed in patients with dialysis-related amyloidosis. We studied the effects of guanidine hydrochloride on the amyloid fibrils of beta2-m, revealing a cooperative unfolding transition similar to that of the native state. The stability of amyloid fibrils increased on the addition of ammonium sulfate, consistent with a role of hydrophobic interactions. The results indicate that the analysis of unfolding transition is useful to obtain insight into the structural stability of amyloid fibrils.     

Investigation into the role of macrophages in the formation and degradation of beta2-microglobulin amyloid fibrils

Dialysis related amyloidosis is a serious complication of long-term hemodialysis in which beta(2)-microglobulin (beta(2)m) forms amyloid fibrils that deposit predominantly in cartilaginous tissues. How these fibrils form in vivo, however, is poorly understood. Here we perform a systematic investigation into the role of macrophages in the formation and degradation of beta(2)m amyloid fibrils, building on observations that macrophages are found in association with beta(2)m amyloid deposits in vivo and that these cells contain intra-lysosomal beta(2)m amyloid. In live cell imaging experiments we demonstrate that macrophages internalize monomeric beta(2)m, whereupon it is sorted to lysosomes. At lysosomal pH beta(2)m self-associates in vitro to form amyloid-like fibrils with an array of morphologies as visualized by atomic force microscopy. Cleavage of the monomeric protein by both macrophages and lysosomal proteases isolated from these cells results in the rapid degradation of the monomeric protein, preventing amyloid formation. Incubation of macrophages with preformed fibrils revealed that macrophages internalize amyloid-like fibrils formed extracellularly, but in marked contrast with the monomeric protein, the fibrils were not degraded within macrophage lysosomes. Correspondingly beta(2)m fibrils were highly resistant to degradation by high concentrations of lysosomal proteases isolated from macrophages. Despite their enormous degradative capacity, therefore, macrophage lysosomes cannot ameliorate dialysis-related amyloidosis by degrading pre-existing amyloid fibrils, but lysosomal proteases may play a protective role by eliminating amyloid precursors before beta(2)m fibrils can accumulate in what may represent an otherwise fibrillogenic environment.     

Apolipoprotein E inhibits the depolymerization of beta 2-microglobulin-related amyloid fibrils at a neutral pH.

beta 2-Microglobulin-related (A beta 2M) amyloidosis is a common and serious complication in patients on long-term hemodialysis, and beta 2-microglobulin (beta 2-m) is a major structural component of A beta 2M amyloid fibrils. Fluorescence spectroscopic analysis with thioflavin T and electron microscopic study revealed that A beta 2M amyloid fibrils readily depolymerize into monomeric beta 2-m at a neutral to basic pH. Circular dichroism analysis revealed that soon after the initiation of the depolymerization reaction at pH 7.5, the characteristic spectrum of beta 2-m in A beta 2M amyloid fibrils changes to resemble that of monomeric beta 2-m at pH 7.5. Apolipoprotein E (apoE), a representative amyloid-associated protein, formed a stable complex with A beta 2M amyloid fibrils and inhibited the depolymerization of A beta 2M amyloid fibrils dose-dependently in a range of 0--10 microM. These results showed that apoE could enhance the deposition of amyloid fibrils in vivo, possibly by binding directly to the surface of the fibrils and stabilizing the conformation of beta 2-m in the fibrils.     

CD studies on films of amyloid proteins and polypeptides: quantitative g-factor analysis indicates a common folding motif

Irrespective of the constituent protein, all amyloid fibrils show similar morphology in the electron microscope and x-ray diffraction patterns characteristic of a "cross-beta" structure, with extended beta-strands perpendicular to the fibril's long axis. Little is known about the amount or type of this structure. I have measured CD spectra of films formed from a number of amyloid proteins and polypeptides, and estimated their contents of extended secondary structure, by analysis of their g-factor spectra, the ratio of the CD and absorbance signals (P. McPhie, Analytical Biochemistry, 2001, Vol. 293, pp. 109-119). Amyloid films of Abeta-(1-40) peptide, beta-2-microglobulin, insulin, and three homopolypeptides show very intense CD spectra, compatible with the presence of a beta-helix-like structure, arranged in a common framework in the fibrils. The extent of this structure was estimated as 45-80% in the protein fibrils and 30-80% in the polypeptide fibrils.     

Seeding specificity in amyloid growth induced by heterologous fibrils

Over residues 15-36, which comprise the H-bonded core of the amyloid fibrils it forms, the Alzheimer's disease plaque peptide amyloid beta (Abeta) possesses a very similar sequence to that of another short, amyloidogenic peptide, islet amyloid polypeptide (IAPP). Using elongation rates to quantify seeding efficiency, we inquired into the relationship between primary sequence similarity and seeding efficiency between Abeta-(1-40) and amyloid fibrils produced from IAPP as well as other proteins. In both a solution phase and a microtiter plate elongation assay, IAPP fibrils are poor seeds for Abeta-(1-40) elongation, exhibiting weight-normalized efficiencies of only 1-2% compared with Abeta-(1-40) fibrils. Amyloid fibrils of peptides with sequences completely unrelated to Abeta also exhibit poor to negligible seeding ability for Abeta elongation. Fibrils from a number of point mutants of Abeta-(1-40) exhibit intermediate seeding abilities for wild-type Abeta elongation, with differing efficiencies depending on whether or not the mutation is in the amyloid core region. The results suggest that amyloid fibrils from different proteins exhibit structural differences that control seeding efficiencies. Preliminary results also suggest that identical sequences can grow into different conformations of amyloid fibrils as detected by seeding efficiencies. The results have a number of implications for amyloid structure and biology.     

Dehydration stability of amyloid fibrils studied by AFM

Atomic force microscopy was used to investigate the stability of dehydrated amyloid fibrils formed by human islet polypeptide (IAPP) and Aβ(1–42) peptides. IAPP amyloid fibrils were imaged in liquid (hydrated state) and in air (dehydrated). In addition, fibrils dried on the mica surface were rehydrated and re-examined both in liquid and in air (after consecutive redrying). As reported previously, the initial drying process does not result in any major change in the amyloid appearance and the dimensions of the fibrils are preserved. However, when once-dried samples are rehydrated, fibril stability is lost. The fibrils disintegrate into small particles that are attached to the mica surface. This process is further confirmed by studies of the rehydrated samples after drying, on which the morphology of the fibrils is clearly changed. Similar behavior is observed for Aβ(1–42) amyloid fibrils, which are apparently stable on first drying, but disintegrate on rehydration. The observed change indicates that dehydration is causing a change in the internal structure of the amyloid fibrils. This has important implications for studies of amyloid fibrils by other techniques. Due to the potential influence of hydration and sample history on amyloid structure, preparation and study of amyloid samples with controlled humidity requires more consideration.     

Direct observation of amyloid fibril growth monitored by thioflavin T fluorescence

Real-time monitoring of fibril growth is essential to clarify the mechanism of amyloid fibril formation. Thioflavin T (ThT) is a reagent known to become strongly fluorescent upon binding to amyloid fibrils. Here, we show that, by monitoring ThT fluorescence with total internal reflection fluorescence microscopy (TIRFM), amyloid fibrils of beta2-microgobulin (beta2-m) can be visualized without requiring covalent fluorescence labeling. One of the advantages of TIRFM would be that we selectively monitor fibrils lying along the slide glass, so that we can obtain the exact length of fibrils. This method was used to follow the kinetics of seed-dependent beta2-m fibril extension. The extension was unidirectional with various rates, suggesting the heterogeneity of the amyloid structures. Since ThT binding is common to all amyloid fibrils, the present method will have general applicability for the analysis of amyloid fibrils. We confirmed this with the octapeptide corresponding to the C terminus derived from human medin and the Alzheimer's amyloid beta-peptide.     

Structural stability of amyloid fibrils of beta(2)-microglobulin in comparison with its native fold

Among various amyloidogenic proteins, beta(2)-microglobulin (beta2-m) responsible for dialysis-related amyloidosis is a target of extensive study because of its clinical importance and suitable size for examining the formation of amyloid fibrils in comparison with protein folding to the native state. The structure and stability of amyloid fibrils have been studied with various physicochemical methods, including H/D exchange of amyloid fibrils combined with dissolution of fibrils by dimethylsulfoxide and NMR analysis, thermodynamic analysis of amyloid fibril formation by isothermal calorimetry, and analysis of the effects of pressure on the structure of amyloid fibrils. The results are consistent with the view that amyloid fibrils are a main-chain-dominated structure with larger numbers of hydrogen bonds and pressure-accessible cavities in the interior, in contrast to the side-chain-dominated native structure with the optimal packing of amino acid residues. We consider that a main-chain dominated structure provides the structural basis for various conformational states even with one protein. When this feature is combined with another unique feature, template-dependent growth, propagation and maturation of the amyloid conformation, which cannot be predicted with Anfinsen's dogma, take place.     

Structural Identification of Individual Helical Amyloid Filaments by Integration of Cryo-Electron Microscopy-Derived Maps in Comparative Morphometric Atomic Force Microscopy Image Analysis

The presence of amyloid fibrils is a hallmark of more than 50 human disorders, including neurodegenerative diseases and systemic amyloidoses. A key unresolved challenge in understanding the involvement of amyloid in disease is to explain the relationship between individual structural polymorphs of amyloid fibrils, in potentially mixed populations, and the specific pathologies with which they are associated. Although cryo-electron microscopy (cryo-EM) and solid-state nuclear magnetic resonance (ssNMR) spectroscopy methods have been successfully employed in recent years to determine the structures of amyloid fibrils with high resolution detail, they rely on ensemble averaging of fibril structures in the entire sample or significant subpopulations. Here, we report a method for structural identification of individual fibril structures imaged by atomic force microscopy (AFM) by integration of high-resolution maps of amyloid fibrils determined by cryo-EM in comparative AFM image analysis. This approach was demonstrated using the hitherto structurally unresolved amyloid fibrils formed in vitro from a fragment of tau (297–391), termed ‘dGAE’. Our approach established unequivocally that dGAE amyloid fibrils bear no structural relationship to heparin-induced tau fibrils formed in vitro. Furthermore, our comparative analysis resulted in the prediction that dGAE fibrils are structurally closely related to the paired helical filaments (PHFs) isolated from Alzheimer’s disease (AD) brain tissue characterised by cryo-EM. These results show the utility of individual particle structural analysis using AFM, provide a workflow of how cryo-EM data can be incorporated into AFM image analysis and facilitate an integrated structural analysis of amyloid polymorphism.     

Amyloid fibril formation in vitro from halophilic metal binding protein: Its high solubility and reversibility minimized formation of amorphous protein aggregations

Halophilic proteins are characterized by high net negative charges and relatively small fraction of hydrophobic amino acids, rendering them aggregation resistant. These properties are also shared by histidine‐rich metal binding protein (HP) from moderate halophile, Chromohalobacter salexigens, used in this study. Here, we examined how halophilic proteins form amyloid fibrils in vitro. His‐tagged HP, incubated at pH 2.0 and 58°C, readily formed amyloid fibrils, as observed by thioflavin fluorescence, CD spectra, and transmission or atomic force microscopies. Under these low‐pH harsh conditions, however, His‐HP was promptly hydrolyzed to smaller peptides most likely responsible for rapid formation of amyloid fibril. Three major acid‐hydrolyzed peptides were isolated from fibrils and turned out to readily form fibrils. The synthetic peptides predicted to form fibrils in these peptide sequences by Waltz software also formed fibrils. Amyloid fibril was also readily formed from full‐length His‐HP when incubated with 10–20% 2,2,2‐trifluoroethanol at pH 7.8 and 25°C without peptide bond cleavage.     

Light Chain Amyloid Fibrils Cause Metabolic Dysfunction in Human Cardiomyocytes

Light chain (AL) amyloidosis is the most common form of systemic amyloid disease, and cardiomyopathy is a dire consequence, resulting in an extremely poor prognosis. AL is characterized by the production of monoclonal free light chains that deposit as amyloid fibrils principally in the heart, liver, and kidneys causing organ dysfunction. We have studied the effects of amyloid fibrils, produced from recombinant λ6 light chain variable domains, on metabolic activity of human cardiomyocytes. The data indicate that fibrils at 0.1 μM, but not monomer, significantly decrease the enzymatic activity of cellular NAD(P)H-dependent oxidoreductase, without causing significant cell death. The presence of amyloid fibrils did not affect ATP levels; however, oxygen consumption was increased and reactive oxygen species were detected. Confocal fluorescence microscopy showed that fibrils bound to and remained at the cell surface with little fibril internalization. These data indicate that AL amyloid fibrils severely impair cardiomyocyte metabolism in a dose dependent manner. These data suggest that effective therapeutic intervention for these patients should include methods for removing potentially toxic amyloid fibrils.     

Alzheimer's Aβ(1-40) Amyloid Fibrils Feature Size-Dependent Mechanical Properties

Amyloid fibrils are highly ordered protein aggregates that are associated with several pathological processes, including prion propagation and Alzheimer''s disease. A key issue in amyloid science is the need to understand the mechanical properties of amyloid fibrils and fibers to quantify biomechanical interactions with surrounding tissues, and to identify mechanobiological mechanisms associated with changes of material properties as amyloid fibrils grow from nanoscale to microscale structures. Here we report a series of computational studies in which atomistic simulation, elastic network modeling, and finite element simulation are utilized to elucidate the mechanical properties of Alzheimer''s Aβ(1-40) amyloid fibrils as a function of the length of the protein filament for both twofold and threefold symmetric amyloid fibrils. We calculate the elastic constants associated with torsional, bending, and tensile deformation as a function of the size of the amyloid fibril, covering fibril lengths ranging from nanometers to micrometers. The resulting Young''s moduli are found to be consistent with available experimental measurements obtained from long amyloid fibrils, and predicted to be in the range of 20–31 GPa. Our results show that Aβ(1-40) amyloid fibrils feature a remarkable structural stability and mechanical rigidity for fibrils longer than ≈100 nm. However, local instabilities that emerge at the ends of short fibrils (on the order of tens of nanometers) reduce their stability and contribute to their disassociation under extreme mechanical or chemical conditions, suggesting that longer amyloid fibrils are more stable. Moreover, we find that amyloids with lengths shorter than the periodicity of their helical pitch, typically between 90 and 130 nm, feature significant size effects of their bending stiffness due the anisotropy in the fibril''s cross section. At even smaller lengths (⪅50 nm), shear effects dominate lateral deformation of amyloid fibrils, suggesting that simple Euler-Bernoulli beam models fail to describe the mechanics of amyloid fibrils appropriately. Our studies reveal the importance of size effects in elucidating the mechanical properties of amyloid fibrils. This issue is of great importance for comparing experimental and simulation results, and gaining a general understanding of the biological mechanisms underlying the growth of ectopic amyloid materials.     

Nano‐mechanical characterization of disassembling amyloid fibrils using the Peak Force QNM method

The comprehensive understanding of disassembly mechanism of amyloid fibrils requires nano‐scale characterization of the mechanical properties of amyloid fibrils during the disassembly process. In this work, gemini surfactant C₁₂C₆C₁₂Br₂ micelles were used as a probe to disassemble Aβ(1‐40) fibrils. The microstructure evolution and nano‐mechanical properties of Aβ(1‐40) fibrils during the disassembly process were systematically investigated by the Peak Force Quantitative Nano‐mechanical (PF‐QNM) technique. The results show an obvious decrease in Young's modulus of mature fibrils with high β‐sheet contents (2.4 ± 1.0 GPa) in comparison to the resulting peptide/surfactant complexes (1.1 ± 0.8 GPa) with loose surface structures. Interestingly, the Young's modulus of spherical peptide/surfactant complexes on the core was more than 3 GPa. This strategy can be used as a standard protocol to investigate the interaction mechanism between amyloid fibrils and small molecules, which may open up new possibilities to explore the mechanism of relevant human diseases.     

Enhancement of AA-amyloid formation in mice by transthyretin amyloid fragments and polyethylene glycol

The mechanism behind amyloid formation is unknown in all types of amyloidosis. Several substances can enhance amyloid formation in animal experiments. To induce secondary systemic amyloid (AA-type amyloid) formation, we injected silver nitrate into mice together with either amyloid fibrils obtained from patients with familial polyneuropathy (FAP) type I or polyethylene glycol (PEG). Mice injected with silver nitrate only served as controls. Amyloid deposits were detectable at day 3 in animals injected with amyloid fibrils and in those injected with PEG, whereas in control mice, deposits were not noted before day 12. Our results indicate that amyloid fibrils from FAP patients and even a non-sulfate containing polysaccharide (PEG) have the potential to act as amyloid-enhancing factors.     

Endocytosed β2-Microglobulin Amyloid Fibrils Induce Necrosis and Apoptosis of Rabbit Synovial Fibroblasts by Disrupting Endosomal/Lysosomal Membranes: A Novel Mechanism on the Cytotoxicity of Amyloid Fibrils

Dialysis-related amyloidosis is a major complication in long-term hemodialysis patients. In dialysis-related amyloidosis, β2-microglobulin (β2-m) amyloid fibrils deposit in the osteoarticular tissue, leading to carpal tunnel syndrome and destructive arthropathy with cystic bone lesions, but the mechanism by which these amyloid fibrils destruct bone and joint tissue is not fully understood. In this study, we assessed the cytotoxic effect of β2-m amyloid fibrils on the cultured rabbit synovial fibroblasts. Under light microscopy, the cells treated with amyloid fibrils exhibited both necrotic and apoptotic changes, while the cells treated with β2-m monomers and vehicle buffer exhibited no morphological changes. As compared to β2-m monomers and vehicle buffer, β2-m amyloid fibrils significantly reduced cellular viability as measured by the lactate dehydrogenase release assay and the 3-(4,5-di-methylthiazol-2-yl)-2,5-diphenyltetrazolium bromide reduction assay and significantly increased the percentage of apoptotic cells as measured by the terminal deoxynucleotidyl transferase-mediated dUTP nick end labeling method. β2-m amyloid fibrils added to the medium adhered to cell surfaces, but did not disrupt artificial plasma membranes as measured by the liposome dye release assay. Interestingly, when the cells were incubated with amyloid fibrils for several hours, many endosomes/lysosomes filled with amyloid fibrils were observed under confocal laser microscopy and electron microscopy, Moreover, some endosomal/lysosomal membranes were disrupted by intravesicular fibrils, leading to the leakage of the fibrils into the cytosol and adjacent to mitochondria. Inhibition of actin-dependent endocytosis by cytochalasin D attenuated the toxicity of amyloid fibrils. These results suggest that endocytosed β2-m amyloid fibrils induce necrosis and apoptosis by disrupting endosomal/lysosomal membranes, and this novel mechanism on the cytotoxicity of amyloid fibrils is described.     

Direct observation of minimum-sized amyloid fibrils using solution NMR spectroscopy

It is challenging to investigate the structure and dynamics of amyloid fibrils at the residue and atomic resolution because of their high molecular weight and heterogeneous properties. Here, we used solution nuclear magnetic resonance (NMR) spectroscopy to characterize the conformation and flexibility of amyloid fibrils of β2-microglobulin (β2m), for which direct observation of solution NMR could not be made. Ultrasonication led to fragmentation producing a solution of minimum-sized fibrils with a molecular weight of around 6 MDa. In 1H-15N heteronuclear single-quantum correlation measurements, five signals, derived from N-terminal residues (i.e., Ile1, Gln2, Arg3, Thr4, and Lys6), were newly detected. Signal strength decreased with the distance from the N-terminal end. Capping experiments with the unlabeled β2m monomer indicated that the signals originated from molecules located inside the fibrils. Ultrasonication makes the residues with moderate flexibility observable by reducing size of the fibrils. Thus, solution NMR measurements of ultrasonicated fibrils will be promising for studying the structure and dynamics of fibrils.