Genetic footprinting in bacteria

In vivo genetic footprinting was developed in the yeast Saccharomyces cerevisiae to simultaneously assess the importance of thousands of genes for the fitness of the cell under any growth condition. We have developed in vivo genetic footprinting for Escherichia coli, a model bacterium and pathogen. We further demonstrate the utility of this technology for rapidly discovering genes that affect the fitness of E. coli under a variety of growth conditions. The definitive features of this system include a conditionally regulated Tn10 transposase with relaxed sequence specificity and a conditionally regulated replicon for the vector containing the transposase and mini-Tn10 transposon with an outwardly oriented promoter. This system results in a high frequency of randomly distributed transposon insertions, eliminating the need for the selection of a population containing transposon insertions, stringent suppression of transposon mutagenesis, and few polar effects. Successful footprints have been achieved for most genes longer than 400 bp, including genes located in operons. In addition, the ability of recombinant proteins to complement mutagenized hosts has been evaluated by genetic footprinting using a bacteriophage lambda transposon delivery system.     

High-throughput comparison of gene fitness among related bacteria

ABSTRACT: BACKGROUND: The contribution of a gene to the fitness of a bacterium can be assayed by whether and to what degree the bacterium tolerates transposon insertions in that gene. We use this fact to compare the fitness of syntenic homologous genes among related Salmonella strains to reveal differences not apparent at the gene sequence level. RESULTS: A transposon Tn5 derivative was used to construct mutants in Salmonella Typhimurium ATCC14028 (STM1) and Salmonella Typhi Ty2 (STY1), which were then grown in rich media. The locations of 234,152 and 53,556 integration sites, respectively, were mapped by sequencing. These data were compared to similar data available for a different Ty2 strain (STY2) and essential genes identified in E. coli K-12 (ECO). Of 277 genes considered essential in ECO, all had syntenic homologs in STM1, STY1, and STY2, and all but nine genes were either devoid of Tn insertions or had very few. For three of these nine genes, part of the annotated gene lacked Tn integrations (yejM, ftsN and murB). At least one of the other six genes, trpS, had a potentially functionally redundant gene encoded elsewhere in Salmonella but not in ECO. An additional 165 genes were almost entirely devoid of transposon integrations in all three Salmonella strains examined, including many genes associated with protein and DNA synthesis. Four of these genes (STM14_1498.L, STM14_2872, STM14_3360.RJ, and STM14_5442) are not found in E. coli. Notable differences in the extent of gene selection were also observed among the three different Salmonella isolates. Mutations in hns, for example, were selected against in STM1 but not in the two STY strains, which have a defect in rpoS rendering hns nonessential. CONCLUSIONS: Comparisons among transposon integration profiles from different members of a species and among related species, all grown in similar conditions, identify differences in gene fitness among syntenic homologous genes. Further differences in fitness profiles among shared genes can be expected in other selective environments, with potential relevance for comparative systems biology.     

Use of Mu phages to isolate transposon insertions juxtaposed to given genes ofEscherichia coli

The small sizes of the DNA fragments transduced by lysates of phage Mu and of mixed lysates of Mu and mini-Mu18A-1 (an internally deleted Mu phage) provide a method for the selection of insertions of transposon Tn10 located very close to givenEscherichia coli genes. Generalized transduction with Mu lysates selected for those insertions located within 38 kilobase pairs of the gene of interest whereas insertions located within about half that distance are directly selected by use of mini-Mu phages. Use of these transduction systems avoids screening of individual colonies by phage P1 transduction for those transposon insertions closely linked to a given gene. Such insertions are most useful for localized mutagenesis and for in vitro molecular cloning.     

Genome-scale identification of conditionally essential genes in E. coli by DNA microarrays

Identifying the genes required for the growth or viability of an organism under a given condition is an important step toward understanding the roles these genes play in the physiology of the organism. Currently, the combination of global transposon mutagenesis with PCR-based mapping of transposon insertion sites is the most common method for determining conditional gene essentiality. In order to accelerate the detection of essential gene products, here we test the utility and reliability of a DNA microarray technology-based method for the identification of conditionally essential genes of the bacterium, Escherichia coli, grown in rich medium under aerobic or anaerobic growth conditions using two different DNA microarray platforms. Identification and experimental verification of five hypothetical E. coli genes essential for anaerobic growth directly demonstrated the utility of the method. However, the two different DNA microarray platforms yielded largely non-overlapping results after a two standard deviations cutoff and were subjected to high false positive background levels. Thus, further methodological improvements are needed prior to the use of DNA microarrays to reliably identify conditionally essential genes on genome-scale.     

Identification of Streptococcus agalactiae virulence genes in the neonatal rat sepsis model using signature-tagged mutagenesis

Group B streptococcal (GBS) infections are the most common cause of bacterial sepsis in the immediate newborn period. Apart from the capsule, the factors required for survival of GBS in the host are not well defined. In this study, signature-tagged transposon mutagenesis (STM) was used to identify genes required for growth and survival of GBS in a neonatal rat sepsis infection model. Approximately 1600 transposon mutants were screened in pools of 80 mutants, and approximately 120 mutants defective for survival in the animal host were identified. We successfully cloned and sequenced DNA flanking the transposon insertions from 92 of the mutants. Fifty per cent of the mutants had transposon insertions in genes with homologues in the public databases, whereas the remaining 50% had transposon insertions in genes with unknown function. A significant proportion of the avirulent mutants had transposon insertions in genes encoding transport-associated or regulatory proteins or in genes involved in cell surface metabolism, emphasizing the significance of these functions for in vivo survival of GBS. Overall, STM analysis revealed GBS genomic loci that encode a wide variety of functional gene classes, underscoring the diversity of bacterial processes required for the infection process. Currently, the function of the genes identified during the screening can only be inferred by homology to previously described genes. However, a number of the genes identified in this study have been shown to correlate with virulence in other pathogens. A virulence of a subset of mutants identified during the screening was confirmed by performing competitive index assays and lethal dose assays. This represents the first report of a genome-wide scan for virulence factors in GBS. The identified genes will further our understanding of the pathogenesis of GBS infections and may represent targets for intervention or lead to the development of novel therapies.     

Clonal Expansion Analysis of Transposon Insertions by High-Throughput Sequencing Identifies Candidate Cancer Genes in a PiggyBac Mutagenesis Screen

Somatic transposon mutagenesis in mice is an efficient strategy to investigate the genetic mechanisms of tumorigenesis. The identification of tumor driving transposon insertions traditionally requires the generation of large tumor cohorts to obtain information about common insertion sites. Tumor driving insertions are also characterized by their clonal expansion in tumor tissue, a phenomenon that is facilitated by the slow and evolving transformation process of transposon mutagenesis. We describe here an improved approach for the detection of tumor driving insertions that assesses the clonal expansion of insertions by quantifying the relative proportion of sequence reads obtained in individual tumors. To this end, we have developed a protocol for insertion site sequencing that utilizes acoustic shearing of tumor DNA and Illumina sequencing. We analyzed various solid tumors generated by PiggyBac mutagenesis and for each tumor >10⁶ reads corresponding to >10⁴ insertion sites were obtained. In each tumor, 9 to 25 insertions stood out by their enriched sequence read frequencies when compared to frequencies obtained from tail DNA controls. These enriched insertions are potential clonally expanded tumor driving insertions, and thus identify candidate cancer genes. The candidate cancer genes of our study comprised many established cancer genes, but also novel candidate genes such as Mastermind-like1 (Mamld1) and Diacylglycerolkinase delta (Dgkd). We show that clonal expansion analysis by high-throughput sequencing is a robust approach for the identification of candidate cancer genes in insertional mutagenesis screens on the level of individual tumors.     

Quantitative target display: a method to screen yeast mutants conferring quantitative phenotypes by 'mutant DNA fingerprints'

Whole genome sequencing of several microbes has revealed thousands of genes of unknown function. A large proportion of these genes seem to confer subtle quantitative phenotypes or phenotypes that do not have a plate screen. We report a novel method to monitor such phenotypes, where the fitness of mutants is assessed in mixed cultures under competitive growth conditions, and the abundance of any individual mutant in the pool is followed by means of its unique feature, namely the mutation itself. A mixed population of yeast mutants, obtained through transposon mutagenesis, was subjected to selection. The DNA regions (targets) flanking the transposon, until nearby restriction sites, are then quantitatively amplified by means of a ligation-mediated PCR method, using transposon-specific and adapter-specific primers. The amplified PCR products correspond to mutated regions of the genome and serve as 'mutant DNA fingerprints' that can be displayed on a sequencing gel. The relative intensity of the amplified DNA fragments before and after selection match with the relative abundance of corresponding mutants, thereby revealing the fate of the mutants during selection. Using this method we demonstrate that UBI4, YDJ1 and HSP26 are essential for stress tolerance of yeast during ethanol production. We anticipate that this method will be useful for functional analysis of genes of any microbe amenable to insertional mutagenesis.     

Site-selected insertion of the transposon Tc1 into a Caenorhabditis elegans myosin light chain gene.

We used the polymerase chain reaction to detect insertions of the transposon Tc1 into mlc-2, one of two Caenorhabditis elegans regulatory myosin light chain genes. Our goals were to develop a general method to identify mutations in any sequenced gene and to establish the phenotype of mlc-2 loss-of-function mutants. The sensitivity of the polymerase chain reaction allowed us to identify nematode populations containing rare Tc1 insertions into mcl-2. mlc-2::Tc1 mutants were subsequently isolated from these populations by a sib selection procedure. We isolated three mutants with Tc1 insertions within the mlc-2 third exon and a fourth strain with Tc1 inserted in nearby noncoding DNA. To demonstrate the generality of our procedure, we isolated two additional mutants with Tc1 insertions within hlh-1, the C. elegans MyoD homolog. All of these mutants are essentially wild type when homozygous. Despite the fact that certain of these mutants have Tc1 inserted within exons of the target gene, these mutations may not be true null alleles. All three of the mlc-2 mutants contain mlc-2 mRNA in which all or part of Tc1 is spliced from the pre-mRNA, leaving small in-frame insertions or deletions in the mature message. There is a remarkable plasticity in the sites used to splice Tc1 from these mlc-2 pre-mRNAs; certain splice sites used in the mutants are very different from typical eukaryotic splice sites.     

Quantitative target display: a method to screen yeast mutants conferring quantitative phenotypes by ‘mutant DNA fingerprints’

Whole genome sequencing of several microbes has revealed thousands of genes of unknown function. A large proportion of these genes seem to confer subtle quantitative phenotypes or phenotypes that do not have a plate screen. We report a novel method to monitor such phenotypes, where the fitness of mutants is assessed in mixed cultures under competitive growth conditions, and the abundance of any individual mutant in the pool is followed by means of its unique feature, namely the mutation itself. A mixed population of yeast mutants, obtained through transposon mutagenesis, was subjected to selection. The DNA regions (targets) flanking the transposon, until nearby restriction sites, are then quantitatively amplified by means of a ligation-mediated PCR method, using transposon-specific and adapter-specific primers. The amplified PCR products correspond to mutated regions of the genome and serve as ‘mutant DNA fingerprints’ that can be displayed on a sequencing gel. The relative intensity of the amplified DNA fragments before and after selection match with the relative abundance of corresponding mutants, thereby revealing the fate of the mutants during selection. Using this method we demonstrate that UBI4, YDJ1 and HSP26 are essential for stress tolerance of yeast during ethanol production. We anticipate that this method will be useful for functional analysis of genes of any microbe amenable to insertional mutagenesis.     

Use of the transposon Ac as a gene-searching engine in the maize genome

We show here that, although genes constitute only a small percentage of the maize genome, it is possible to identify them phenotypically as Ac receptor sites. Simple and efficient Ac transposition assays based on the well-studied endosperm markers bz and wx were used to generate a collection of >1300 independent Ac transposants. The majority of transposed Ac elements are linked to either the bz or the wx donor loci on chromosome 9. A few of the insertions produce obvious visible phenotypes, but most of them do not, suggesting that these populations will be more useful for reverse genetics than for forward transposon mutagenesis. An inverse polymerase chain reaction method was adapted for the isolation of DNA adjacent to the transposed Ac elements (tac sites). Most Ac insertions were into unique DNA. By sequencing tac sites and comparing the sequences to existing databases, insertions were identified in a number of putative maize genes. The expression of most of these genes was confirmed by RNA gel blot analysis. We report here the isolation and characterization of the first 46 tac sites from the two insertion libraries.     

Identification of cold shock gene loci in Sinorhizobium meliloti by using a luxAB reporter transposon

Using a luxAB reporter transposon, seven mutants of Sinorhizobium meliloti were identified as containing insertions in four cold shock loci. LuxAB activity was strongly induced (25- to 160-fold) after a temperature shift from 30 to 15 degrees C. The transposon and flanking host DNA from each mutant was cloned, and the nucleic acid sequence of the insertion site was determined. Unexpectedly, five of the seven luxAB mutants contained transposon insertions in the 16S and 23S rRNA genes of two of the three rrn operons of S. meliloti. Directed insertion of luxAB genes into each of the three rrn operons revealed that all three operons were similarly affected by cold shock. Two other insertions were found to be located downstream of a homolog of the major Escherichia coli cold shock gene, cspA. Although the cold shock loci were highly induced in response to a shift to low temperature, none of the insertions resulted in a statistically significant decrease in growth rate at 15 degrees C.     

Transposon-tagging identifies novel pathogenicity genes in Fusarium graminearum

With the increase of sequenced fungal genomes, high-throughput methods for functional analyses of genes are needed. We assessed the potential of a new transposon mutagenesis tool deploying a Fusarium oxysporum miniature inverted-repeat transposable element mimp1, mobilized by the transposase of impala, a Tc1-like transposon, to obtain knock-out mutants in Fusarium graminearum. We localized 91 mimp1 insertions which showed good distribution over the entire genome. The main exception was a major hotspot on chromosome 2 where independent insertions occurred at exactly the same nucleotide position. Furthermore insertions in promoter regions were over-represented. Screening 331 mutants for sexual development, radial growth and pathogenicity on wheat resulted in 19 mutants (5.7%) with altered phenotypes. Complementation with the original gene restored the wild-type phenotype in two selected mutants demonstrating the high tagging efficiency. This is the first report of a MITE transposon tagging system as an efficient mutagenesis tool in F. graminearum.     

Nonessential genes of phage phiYeO3-12 include genes involved in adaptation to growth on Yersinia enterocolitica serotype O:3

Bacteriophage phiYeO3-12 is a T7/T3-related lytic phage that naturally infects Yersinia enterocolitica serotype O:3 strains by using the lipopolysaccharide O polysaccharide (O antigen) as its receptor. The phage genome is a 39,600-bp-long linear, double-stranded DNA molecule that contains 58 genes. The roles of many of the genes are currently unknown. To identify nonessential genes, the isolated phage DNA was subjected to MuA transposase-catalyzed in vitro transposon insertion mutagenesis with a lacZ' gene-containing reporter transposon. Following electroporation into Escherichia coli DH10B and subsequent infection of E. coli JM109/pAY100, a strain that expresses the Y. enterocolitica O:3 O antigen on its surface, mutant phage clones were identified by their beta-galactosidase activity, manifested as a blue color on indicator plates. Transposon insertions were mapped in a total of 11 genes located in the early and middle regions of the phage genome. All of the mutants had efficiencies of plating (EOPs) and fitnesses identical to those of the wild-type phage when grown on E. coli JM109/pAY100. However, certain mutants exhibited altered phenotypes when grown on Y. enterocolitica O:3. Transposon insertions in genes 0.3 to 0.7 decreased the EOP on Y. enterocolitica O:3, while the corresponding deletions did not, suggesting that the low EOP was not caused by inactivation of the genes per se. Instead, it was shown that in these mutants the low EOP was due to the delayed expression of gene 1, coding for RNA polymerase. On the other hand, inactivation of gene 1.3 or 3.5 by either transposon insertion or deletion decreased phage fitness when grown on Y. enterocolitica. These results indicate that phiYeO3-12 has adapted to utilize Y. enterocolitica as its host and that these adaptations include the products of genes 1.3 and 3.5, DNA ligase and lysozyme, respectively.     

Natural transposon mutagenesis of clinical isolates of Mycobacterium tuberculosis: how many genes does a pathogen need?

Transposable elements can affect an organism's fitness through the insertional inactivation of genes and can therefore be used to identify genes that are nonessential for growth in vitro or in animal models. However, these models may not adequately represent the genetic requirements during chains of human infection. We have therefore conducted a genome-wide survey of transposon mutations in Mycobacterium tuberculosis isolates from cases of human infection, identifying the precise, base-specific insertion sites of the naturally occurring transposable element IS6110. Of 294 distinct insertions mapped to the strain H37Rv genome, 180 were intragenic, affecting 100 open reading frames. The number of genes carrying IS6110 in clinical isolates, and hence apparently not essential for infection and transmission, is very much lower than the estimates of nonessential genes derived from in vitro studies. This suggests that most genes in M. tuberculosis play a significant role in human infection chains. IS6110 insertions were underrepresented in genes associated with virulence, information pathways, lipid metabolism, and membrane proteins but overrepresented in multicopy genes of the PPE family, genes of unknown function, and intergenic sequences. Population genomic analysis of isolates recovered from an organism's natural habitat is an important tool for determining the significance of genes or classes of genes in the natural biology of an organism.     

A system of transposon mutagenesis for bacteriophage T4

We have developed a system of transposon mutagenesis for bacteriophage T4. The transposon is a plasmid derivative of Tn5 which contains the essential T4 gene 24, permitting a direct selection for transposition events into a gene 24-deleted phage. The transposition occurred at a frequency of only 10(-7) per progeny phage, even though a dam- host was used to increase transposition frequency. Phage strains with a transposon insert were distinguished from most pseudorevertants of the gene 24 deletion by plaque hybridization using a transposon-specific probe. Mapping analysis showed that the transposon inserts into a large number of sites in the T4 genome, probably with a preference for certain regions. The transposon insertions in four strains were analysed by DNA sequencing using primers that hybridize to each end of the transposon and read out into the T4 genome. In each case, a 9 bp T4 target sequence had been duplicated and the insertions had occurred exactly at the IS50 ends of the transposon, demonstrating that bona fide transposition had occurred. Finally, the transposon insert strains were screened on the TabG Escherichia coli strain, which inhibits the growth of T4 motA mutants, and a motA transposon insert strain was found.     

Essential Genes in <Emphasis Type="Italic">Salmonella enteritidis</Emphasis> as Identified by TnAraOut Mutagenesis

TnAraOut is a mariner-based transposon containing an arabinose-inducible promoter P(BAD) facing outward. TnAraOut mutagenesis previously used to identify essential genes in Vibrio cholerae can also be used to identify in vitro essential genes in Salmonella enteritidis. A mutant screen was conducted based on the assumption that a mutant-harboring TnAraOut insertion in the promoter region of an essential gene should exhibit arabinose-dependent growth phenotype. Among five isolated mutants with such growth phenotype, DNA sequencing revealed that two of them have insertions in the upstream region of atpI and the coding region of yigP gene such that P(BAD) promoter drives the expression of the downstream gene(s). Growth assay showed that the growth defects of these two mutants were fully restored by arabinose induction.