The ability of filamentous fungi to produce acids on indoor building materials

Sixty two filamentous fungi isolated from paint coatings, wallpaper, carton-gypsum board, and indoor air in buildings were screened for acid activity. It was found that 64.5% of strains produce acids on medium with bromo-cresol purple, where 18% of the strains were distinguished by very high acid activity (acid activity coefficient Q = 1.32–2.83), including the species:Aspergillus niger, Aspergillus versicolor, Penicillium expansum, Penicillium brevicom pactum, Penicillium chrysogenum, Cladosporium cladosporioides, Stachybotrys chartarum, Mucor globosus, Ulocladium chartarum andAlternaria alternata. Research indicated that filamentous fungi considerably decrease the pH of the medium when that medium containing building material. The greatest acid production and pH decrease of the medium was observed during the growth of filamentous fungi in a medium with mortar, while the production of acids was less in a medium with cartongypsum board, gypsum, and wallpaper. Filamentous fungi produced succinic, oxalic, malic and fumaric acids in the medium with indoor building materials. It was stated that the type of building material affects the spectrum and quantity of organic acids produced by filamentous fungi.     

Hyphomycetes fungi in rainwater failling from building roofs

The presence of 33 Hyphomycetes species was noted in rainwater falling from six roof types. The following fungi were recorded for the first time from Poland:Dactylaria lunata, Hyaloscypha zalewskii, Scolecobasidium flagelliferum andWiesneriomyces laurinus.     

Allergenic fungi and actinomycetes in smoking materials and their health implications

Street marijuana, commercial cigarettes and pipe tobaccos were studied for the presence of fungi and actinomycetes associated with hypersensitivity pneumonitis. Aspergillus species and thermophilic actinomycetes were isolated from the smoking materials. In addition, Aspergillus fumigatus spores were isolated from marijuana smoke, indicating the potential hazard involved in developing serious disease. Precipitin antibodies against fungi, particularly Aspergillus, showed a higher prevalence in marijuana smokers, whereas only very few cigarette smokers and nonsmokers demonstrated antibodies to fungi. Cigarette smokers and nonsmokers showed more or less similar prevelance of antibodies against thermophilic actinomycetes.     

Manganese and iron oxidation by fungi isolated from building stone

Acid and nonacid generating fungal strains isolated from weathered sandstone, limestone, and granite of Spanish cathedrals were assayed for their ability to oxidize iron and manganese. In general, the concentration of the different cations present in the mineral salt media directly affected Mn(IV) oxide formation, although in some cases, the addition of glucose and nitrate to the culture media was necessary. Mn(II) oxidation in acidogenic strains was greater in a medium containing the highest concentrations of glucose, nitrate, and manganese. High concentrations of Fe(II), glucose, and mineral salts were optimal for iron oxidation. Mn(IV) precipitated as oxides or hydroxides adhered to the mycelium. Most of the Fe(III) remained in solution by chelation with organic acids excreted by acidogenic strains. Other metabolites acted as Fe(III) chelators in nonacidogenic strains, although Fe(III) deposits around the mycelium were also detected. Both iron and manganese oxidation were shown to involve extracellular, hydrosoluble enzymes, with maximum specific activities during exponential growth. Strains able to oxidize manganese were also able to oxidize iron. It is concluded that iron and manganese oxidation reported in this work were biologically induced by filamentous fungi mainly by direct (enzymatic) mechanisms.Correspondence to: G. Gomez-Alarcon.     

Associations between fungal species and water-damaged building materials

Fungal growth in damp or water-damaged buildings worldwide is an increasing problem, which has adverse effects on both the occupants and the buildings. Air sampling alone in moldy buildings does not reveal the full diversity of fungal species growing on building materials. One aim of this study was to estimate the qualitative and quantitative diversity of fungi growing on damp or water-damaged building materials. Another was to determine if associations exist between the most commonly found fungal species and different types of materials. More than 5,300 surface samples were taken by means of V8 contact plates from materials with visible fungal growth. Fungal identifications and information on building material components were analyzed using multivariate statistic methods to determine associations between fungi and material components. The results confirmed that Penicillium chrysogenum and Aspergillus versicolor are the most common fungal species in water-damaged buildings. The results also showed Chaetomium spp., Acremonium spp., and Ulocladium spp. to be very common on damp building materials. Analyses show that associated mycobiotas exist on different building materials. Associations were found between (i) Acremonium spp., Penicillium chrysogenum, Stachybotrys spp., Ulocladium spp., and gypsum and wallpaper, (ii) Arthrinium phaeospermum, Aureobasidium pullulans, Cladosporium herbarum, Trichoderma spp., yeasts, and different types of wood and plywood, and (iii) Aspergillus fumigatus, Aspergillus melleus, Aspergillus niger, Aspergillus ochraceus, Chaetomium spp., Mucor racemosus, Mucor spinosus, and concrete and other floor-related materials. These results can be used to develop new and resistant building materials and relevant allergen extracts and to help focus research on relevant mycotoxins, microbial volatile organic compounds (MVOCs), and microparticles released into the indoor environment.     

Mycotoxins in crude building materials from water-damaged buildings

We analyzed 79 bulk samples of moldy interior finishes from Finnish buildings with moisture problems for 17 mycotoxins, as well as for fungi that could be isolated using one medium and one set of growth conditions. We found the aflatoxin precursor, sterigmatocystin, in 24% of the samples and trichothecenes in 19% of the samples. Trichothecenes found included satratoxin G or H in five samples; diacetoxyscirpenol in five samples; and 3-acetyl-deoxynivalenol, deoxynivalenol, verrucarol, or T-2-tetraol in an additional five samples. Citrinine was found in three samples. Aspergillus versicolor was present in most sterigmatocystin-containing samples, and Stachybotrys spp. were present in the samples where satratoxins were found. In many cases, however, the presence of fungi thought to produce the mycotoxins was not correlated with the presence of the expected compounds. However, when mycotoxins were found, some toxigenic fungi usually were present, even if the species originally responsible for producing the mycotoxin was not isolated. We conclude that the identification and enumeration of fungal species present in bulk materials are important to verify the severity of mold damage but that chemical analyses are necessary if the goal is to establish the presence of mycotoxins in moldy materials.     

Applications of biopolymers and other biotechnological products in building materials

Bio admixtures are functional molecules used in building products to optimize material properties. They include natural or modified biopolymers, biotechnological and biodegradable products. Concrete and dry-mix mortars (e.g. wall plasters or tile adhesives) represent two major applications for bio admixtures. Examples of bio products used in concrete are lignosulfonate, sodium gluconate, pine root extract, protein hydrolysates and Welan gum; and in dry-mix mortar methyl hydroxypropyl cellulose, hydroxypropyl starch, guar gum, tartaric acid, casein, succinoglycan and Xanthan gum. In a number of applications, bio admixtures compete well with synthetic admixtures. Sometimes, they are indispensable in the formulation of certain building products. Their market share is expected to increase because of technological advances, particularly in the field of microbial biopolymers, and because of the growing trend to use naturally based or biodegradable products in building materials.     

Occurrence and moisture requirements of microbial growth in building materials

Microbial growth was studied in six damp buildings. Mesophilic fungi, especially Penicillium spp., yeasts, and species of Cladosporium and Aspergillus, occurred most abundantly on building constructions. Thermophilic fungi and mesophilic actinomycetes were occasionally found. A toxigenic fungus, Stachybotrys sp., was also detected on cellulose-based materials. In a cytotoxicity test, 23% of samples were positive. Spore counts varied considerably on materials, but no correlation between counts and the substrate or its water activity (a_w) was observed. In experiments a rapid increase in CO₂ production and spore propagule count was observed in all materials incubated at a relative humidity (RH) (RH=0·01^*water activity) of 96–98°. Some differences were noted between materials in CO₂ evolved, but not in propagule counts.     

Community structure of bacteria and fungi in aerosols of a pig confinement building

Modern intensive husbandry practices can create poor indoor air quality, with high levels of airborne dust, endotoxins, ammonia, and microorganisms. Air in a sow breeding barn was investigated to determine the biomass composition of bioaerosols using molecular methods supplemented with microscopic and cultivation-dependent approaches. A total of 2.7?±?0.7?×?10(7) bacterial cells?m(-3) air and 1.2?±?0.3?×?10(6) fungi spores?m(-3) were detected, corresponding to the fungal biovolume constituted 98% of the total microbial biovolume (fungal and bacterial). Fifty-two percent of all 4',6-diamidino-2-phenyl indole-stained cells were detectable with fluorescence in situ hybridization (FISH) with a general bacterial probe mixture. Quantitative FISH of the bacterial consortium revealed Firmicutes as the dominant group with Streptococcus as the major genus, while Actinobacteria constituted 10% of the detectable bacteria. Additionally, the study revealed an abundant and diverse fungal community including species not previously found in similar environments. The most abundant fungal 18S rRNA gene clone sequences identified affiliated with the Aspergillus-Eurotium cluster, but among others, species of Wallemia, Mucorales, and Russulales were detected. For both fungi and anaerobic bacteria, a hitherto undescribed diversity was found in bioaerosols from a modern sow breeding barn, which potentially could create poor indoor air quality, although their effect on the health of farmworkers and stock still is not resolved.     

Degradation dynamics of lignocellulose materials by wood-rottingPleurotus fungi

When grown on wheat straw,Pleurotus decomposes both the lignin and the cellulose components of the substrate. The course of degradation differs during growth and fructification. The losses of dry mass during growth were about 20 %. The absolute amount of hemicelluloses, cellulose and lignin was decreasing. Hemicelluloses and lignin were degraded at a higher rate than cellulose. The total mass losses of the substrate after fructification were 32 to 45 %. Cellulose was consumed at a higher rate than lignin.     

Cellulolytic enzymes of fungi isolated from wood materials

Species of Cunninghamella, Gliocladium deliquescens, Trichoderma harzianum and T. koningii were isolated from rotten wood chips. When grown on medium containing cellulose, all except Cunninghamella produced the three primary enzymes (exoglucanase, endoglucanase and -glucosidase) of the cellulase complex. The patterns for enzyme production, changes in mycelial mass and pH of the induction medium for T. harzianum and T. koningii were closely similar, and were distinguishable from those of G. deliquescens.     

Genetic Recombination in Mycobacteria

Evidence for genetic recombination between Mycobacterium smegmatis strain Rabinowitchi (Rab) and strain Jucho or PM5 is presented. Backcrosses of recombinants by either parental strain indicated four different types of mating behavior, suggesting that the mycobacterial compatibilities are controlled by at least two different factors. No sex factor that transfers at a high frequency or that is sensitive to acridine dyes was detected. Analysis of segregation of unselected markers revealed that strain Jucho, or PM5, contributes the majority of alleles in almost all recombinants obtained from different selective media. Efforts to construct linkage maps for the markers employed failed because of ordering ambiguities. Mating medium containing streptomycin prevented genetic recombination when strain Rab was resistant to the antibiotic and Jucho, or PM5, was sensitive, but it did not prevent recombination when Rab was sensitive to streptomycin and Jucho, or PM5, was resistant. Very low frequency of recombinant formation was observed when Jucho, or PM5, had been treated with streptomycin, whereas recombinants were formed at fairly high frequencies when Rab had been treated with the antibiotic, suggesting that the roles of parental strains in zygote formation were not identical. The results suggest a polar transfer of genetic material from Rab to Jucho, or PM5, although an alternative possibility of cell fusion followed by exclusion could not be excluded.     

Bacteria, molds, and toxins in water-damaged building materials.

Microbial toxins and eukaryotic cell toxicity from indoor building materials heavily colonized by fungi and bacteria were analyzed. The dominant colonizers at water-damaged sites of the building were Stachybotrys chartarum (10(3) to 10(5) visible conidia cm-2), Penicillium and Aspergillus species (10(4) CFU mg-1), gram-negative bacteria (10(4) CFU mg-1), and mycobacteria (10(3) CFU mg-1). The mycobacterial isolates were most similar to M. komossense, with 98% similarity of the complete 16S rDNA sequence. Limulus assay of water extracts prepared from a water-damaged gypsum liner revealed high contents of gram-negative endotoxin (17 ng mg-1 of E. coli lipopolysaccharide equivalents) and beta-D-glucan (210 ng mg-1 of curdlan equivalents). High-performance liquid chromatography analysis of the methanol extracts showed that the water-damaged gypsum liner also contained satratoxin (17 ng mg-1). This methanol-extracted substance was 200 times more toxic to rabbit skin and fetus feline lung cells than extract of gypsum liner sampled from a non-water-damaged site. The same extract contained toxin(s) that paralyzed the motility of boar spermatozoa at extremely low concentrations; the 50% effective concentration was 0.3 microgram of dry solids per ml. This toxicity was not explainable by the amount of bacterial endotoxin, beta-D-glucan, or satratoxin present in the same extract. The novel in vitro toxicity test that utilized boar spermatozoa as described in this article is convenient to perform and reproducible and was a useful tool for detecting toxins of microbial origin toward eukaryotic cells not detectable in building materials by the other methods.     

Discussing possible standards of natural radioactivity in building materials

Summary This paper discusses different possibilities of deriving reference values for the natural radioactivity concentrations in building materials to estimate possible additional radiation exposure for the population. Based on comprehensive experimental and theoretical investigations the consequences of the resulting hypothetical reference activity concentrations in building materials, applying different dose limits, were examined. The calculation of the activity concentration standards was performed for standard conditions obtained by earlier studies on exhalation of Radon-222 and Radon-220 from building materials.Dedicated to Prof. L.E. Feinendegen on the occasion of his 60th birthday     

Aspergillus fumigatus and other thermotolerant fungi generated by hospital building demolition.

On 13 September 1981, a 51-year-old seven-story building within our hospital complex was demolished by explosives. The concern that this event might release large numbers of thermotolerant fungi (TF), potentially hazardous to immunosuppressed patients, led us to seal hospital windows and doors. The air-handling systems were also manipulated. Concentrations of airborne TF, especially Aspergillus fumigatus, were determined before and after demolition, using Andersen and Cassella air samplers with inhibitory mold agar plates. Two outdoor and two hospital ward locations were sampled. The plates were incubated at 37 degrees C; the CFU per cubic meter were counted at 72 h. The outdoor concentration of TF increased at one site by an average of 1.8 log10 (10(2) to 10(5] over the predemolition level. A. fumigatus increased 3.3 log10 (10(0) to 10(4] at the other outdoor site. The indoor TF concentrations increased about 1 log10 (10(1) to 10(2] after demolition. Counts on the hospital wards were not remarkable when compared with previous surveillance air sampling. Protective measures apparently minimized the infiltration of TF during explosive demolition.     

Incidence and remediation of fungi in a sick building in Malaysia: a case study

Problems caused by indoor microbial, especially fungal growth, have been further exaggerated by the increased incidence of water intrusions, condensation from air-conditioning system, and other factors. While fungal contamination in a building can be one of the indicators of indoor air quality (IAQ), air quality assessment and remediation should be considered as important and should be carried out systematically. This study reports the incidence and remediation of an excessive fungal growth in a building in Universiti Sains Malaysia (USM), Pulau Pinang, Malaysia. Acting on an official report by the building owner and occupants, an immediate walk-through investigation was carried out between June and December 2009. A thorough sampling comprising swab and spore impactor techniques showed that the colony-forming unit per cubic meter of air (CFU/m³) levels were far above those in the guidelines of most developed countries. Thus, the building was declared a ‘sick building’ and closed to the publics. However, through immediate action with recommended methods to overcome the problem, the premise has been pronounced safe. This is a good example of successful teamwork that involved a continuous investigation by a team of experts along with comprehensive action taken by the occupants and other authorities responsible for the building.