Temperature sensitization of liposomes by use of thermosensitive block copolymers synthesized by living cationic polymerization: effect of copolymer chain length

We prepared block copolymers of (2-ethoxy)ethoxyethyl vinyl ether (EOEOVE) and octadecyl vinyl ether (ODVE) with the number average molecular weights of 6900, 9300, and 16 700 by living cationic polymerization. The poly(EOEOVE) block acts as a temperature-sensitive moiety, and the poly(ODVE) block acts as an anchor moiety. We also investigated the effect of chain length of the copolymer poly(EOEOVE) block on the ability to sensitize liposomes. The copolymers underwent a coil-globule transition at approximately 36 degrees C in the presence of a membrane of egg yolk phosphatidylcholine (EYPC), detected using differential scanning calorimetry (DSC). Liposomes encapsulating calcein, a water-soluble fluorescent dye, were prepared from mixtures of dioleoylphosphatidylethanolamine, EYPC, and the copolymers. While the copolymer-modified liposomes released little calcein below 30 degrees C, release was enhanced above 35 degrees C, indicating that dehydrated copolymer chains destabilized the liposome membrane. In addition, copolymers with a longer poly(EOEOVE) block induced a more drastic enhancement of contents release in a narrow temperature region near the transition temperature of the poly(EOEOVE) block. As a result, the copolymer with an average molecular weight of 16 700 generated highly sensitive liposomes that produced rapid and dramatic release of the contents in response to temperature.     

Temperature-sensitive poly(N-(2-hydroxypropyl)methacrylamide mono/dilactate)-coated liposomes for triggered contents release

We prepared thermosensitive poly( N-(2-hydroxypropyl)methacrylamide mono/dilactate) (pHPMA mono/dilactate) polymer and studied temperature-triggered contents release from polymer-coated liposomes. HPMA mono/dilactate polymer was synthesized with a cholesterol anchor suitable for incorporation in the liposomal bilayers and with a cloud point (CP) temperature of the polymer slightly above normal body temperature (42 degrees C). Dynamic light scattering (DLS) measurements showed that whereas the size of noncoated liposomes remained stable upon raising the temperature from 25 to 46 degrees C, polymer-coated liposomes aggregated around 43 degrees C. Also, noncoated liposomes loaded with calcein showed hardly any leakage of the fluorescent marker when heated to 46 degrees C. However, polymer-coated liposomes showed a high degree of temperature-triggered calcein release above the CP of the polymer. Likely, liposome aggregation and bilayer destabilization are triggered because of the precipitation of the thermosensitive polymer above its CP onto the liposomal bilayers, followed by permeabilization of the liposomal membrane. This study demonstrates that liposomes surface-modified with HPMA mono/dilactate copolymer are attractive systems for achieving temperature-triggered contents release.     

Temperature sensitization of liposomes using copolymers of N-isopropylacrylamide.

To obtain liposomes which release the contents in response to ambient temperature, liposomes modified with copolymers of N-isopropylacrylamide with varying lower critical solution temperatures have been designed. Poly(N-isopropylacrylamide-co-acrylamide)s with various compositions were synthesized by free-radical copolymerization. The lower critical solution temperature of the polymer increased with increasing acrylamide content in the polymer. Poly(N-isopropylacrylamide-co-acrylamide-co-N, N-didodecylacrylamide)s were also prepared via the same method as the thermosensitive polymers having anchor groups to the liposome membrane. Calcein-loaded dioleoylphosphatidylethanolamine/egg yolk phosphatidylcholine (6:4, w/w) liposomes were coated with these polymers by incubating the liposomes with aqueous solutions of the polymers. The liposomes hardly released the contents below the lower critical solution temperature of the polymer, but the release was greatly enhanced above that temperature. The liposomes were also made from a mixture of the same lipids and the polymer. The liposome revealed a more drastic release property than the liposomes prepared by the incubation with the polymer solution, because the polymer chains were bound on both surfaces of the membrane. The close relationship between lower critical solution temperatures of the polymers and temperature regions where enhancement of the release from the polymer-fixed liposomes demonstrates that the release was triggered by alteration of the polymers from a hydrophilic state to a hydrophobic state occurring at their lower critical solution temperatures.     

Temperature-dependent aggregation of pH-sensitive phosphatidyl ethanolamine-oleic acid-cholesterol liposomes as measured by fluorescent spectroscopy.

pH-sensitive liposomes made of phosphatidyl ethanolamine-oleic acid-cholesterol (4:2:4 molar ratio) at neutral pH values aggregate at approximately 40 degrees C. The aggregation is accompanied by liposome destabilization and by the release of intraliposomal fluorescent marker (calcein). Both aggregation and calcein leakage start at the temperature corresponding to the lipid phase transition into hexagonal phase. In the system studied the phase transition temperature interval is within 45 to 55 degrees C as estimated with the use of the fluorescent probe 1,6-diphenylhexatriene. The presence of cell cultivation medium RPMI 1640 decreases liposome aggregation temperature. The addition of 10% serum to the system decreases the temperature at which the aggregation proceeds still further. The conclusion that serum-free media should be used for cell experiments involving pH-sensitive liposomes is made.     

Temperature-controlled interaction of thermosensitive polymer-modified cationic liposomes with negatively charged phospholipid membranes

To obtain cationic liposomes of which affinity to negatively charged membranes can be controlled by temperature, cationic liposomes consisting of 3beta-[N-(N', N'-dimethylaminoethane)carbamoyl]cholesterol and dioleoylphosphatidylethanolamine were modified with poly(N-acryloylpyrrolidine), which is a thermosensitive polymer exhibiting a lower critical solution temperature (LCST) at ca. 52 degrees C. The unmodified cationic liposomes did not change its zeta potential between 20-60 degrees C. The polymer-modified cationic liposomes revealed much lower zeta potential values below the LCST of the polymer than the unmodified cationic liposomes. However, their zeta potential increased significantly above this temperature. The unmodified cationic liposomes formed aggregates and fused intensively with anionic liposomes consisting of egg yolk phosphatidylcholine and phosphatidic acid in the region of 20-60 degrees C, due to the electrostatic interaction. In contrast, aggregation and fusion of the polymer-modified cationic liposomes with the anionic liposomes were strongly suppressed below the LCST. However, these interactions were enhanced remarkably above the LCST. In addition, the polymer-modified cationic liposomes did not cause leakage of calcein from the anionic liposomes below the LCST, but promoted the leakage above this temperature as the unmodified cationic liposomes did. Temperature-induced conformational change of the polymer chains from a hydrated coil to a dehydrated globule might affect the affinity of the polymer-modified cationic liposomes to the anionic liposomes.     

In vitro characterization of a novel polymeric-based pH-sensitive liposome system

This study demonstrates rapid and pH-sensitive release of a highly water-soluble fluorescent aqueous content marker, pyranine, from egg phosphatidylcholine liposomes following incorporation of N-isopropylacrylamide (NIPA) copolymers in liposomal membranes. The pH-sensitivity of this system correlates with the precipitation of the copolymers at acidic pH. In vitro release can be significantly improved by increasing the percentage of anchor in the copolymer and thus favoring its binding to the liposomal bilayer. In the case of liposomes containing a poly(ethylene glycol)-phospholipid conjugate, the insertion of the pH-sensitive copolymer in the liposomal membrane appears to be sterically inhibited. Dye release from these formulations at acidic pH can still be achieved by varying the anchor molar ratio and/or molecular mass of the polymers or by including the latter during the liposome preparation procedure. Removal of unbound polymer results in decreased leakage only when the copolymer is inserted by incubation with preformed liposomes, but can be overcome by preparing liposomes in the presence of polymer. Aqueous content and lipid mixing assays suggest contents release can occur without membrane fusion. The results of this study indicate that the addition of pH-sensitive copolymers of NIPA represents promising strategy for improving liposomal drug delivery.     

Sulfonamide-based pH- and temperature-sensitive biodegradable block copolymer hydrogels

Novel pH- and temperature-sensitive biodegradable poly(epsilon-caprolactone-co-lactide)-poly(ethylene glycol) (PCLA-PEG) block copolymers were synthesized with oligomeric sulfamethazine (OSM) end groups (OSM-PCLA-PEG-PCLA-OSM). Aqueous solutions of these block copolymers have shown sol-gel transition behavior upon both temperature and pH changes under physiological conditions (37 degrees C, pH 7.4). The sol-gel transition of these block copolymer solutions was fine-tuned by controlling the PEG length, the hydrophobic to hydrophilic block ratio (PCLA/PEG), and the molecular weight of the sulfamethazine oligomer. Since changes in temperature do not induce gel formation in this pH- and temperature-sensitive block copolymer solution, this hydrogel can be employed as an injectable carrier using a long guide catheter into the body. In addition, the pH of the block copolymer solution showed no change following PCLA degradation over 1 month, and no indication of gel collapse was observed on addition of buffer solution. As such, these properties make the OSM-PCLA-PEG-PCLA-OSM hydrogel an ideal candidate for use as an injectable carrier for certain protein-based drugs known to denature in low-pH environments.     

On the characterization of pH-sensitive liposome/polymer complexes

A randomly alkylated copolymer of N-isopropylacrylamide, methacrylic acid and N-vinyl-2-pyrrolidone was characterized with regard to its pH- and temperature-triggered conformational change. It was then complexed to liposomes to produce pH-responsive vesicles. Light scattering and differential scanning calorimetry experiments performed at neutral pH revealed that the polymer underwent coil-to-globule phase transition over a wide range of temperatures. At 37 degrees C and pH 7.4, although the polymer was water-soluble, Fourier transform infrared spectroscopy analysis showed that it was partly dehydrated. At acidic pH, the decrease in the lower critical solution temperature was accompanied by an increase in cooperativity degree of the phase transition. Complexation of copolymer to liposomes did not substantially influence its phase transition. The liposome/copolymer complexes were stable at neutral pH but rapidly released their contents under acidic conditions. The copolymer slightly increased liposome circulation time following intravenous administration to rats. The addition of poly(ethylene glycol) to the formulation had a detrimental effect on pH-sensitivity but enhanced substantially the circulation time.     

Temperature-sensitive liposomes for co-delivery of tamoxifen and imatinib for synergistic breast cancer treatment

Co-delivery of chemotherapeutic agents using nanocarriers is a promising strategy for enhancing therapeutic efficacy of anticancer agents. The aim of this work was to develop tamoxifen and imatinib dual drug loaded temperature-sensitive liposomes to treat breast cancer. Liposomes were prepared using 1, 2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), monopalmitoyl-2-hydroxy-sn-glycero-3-phosphocholine (MPPC), and different surface active agents. The liposomes were characterized for the average particle size, zeta potential, transition temperature, and drug release below and above liposomal transition temperature. The temperature-sensitive liposomes co-encapsulated with tamoxifen and imatinib were investigated for their synergistic activity against MCF-7 and MDA-MB-231 breast cancer cells. The liposomal nanoparticles showed a transition temperature of 39.4?°C and >70% encapsulation efficiency for tamoxifen and imatinib. The temperature-responsive liposomes showed more than 80% drug released within 30?min above transition temperature. Dual drug loaded liposomes showed synergistic growth inhibition against MCF-7 and MDA-MB-231 breast cancer cells. Co-delivery of tamoxifen and imatinib using temperature-sensitive liposomes can be developed as a potential targeting strategy against breast cancer.     

Glucose-sensitivity of liposomes incorporating conjugates of glucose oxidase and poly(N-isopropylacrylamide-co-methacrylic acid-co-octadecylacrylate)

Liposomes, which release their contents in response to the concentration of glucose, were prepared by modifying the liposomal surface with the conjugate of poly(N-isopropylacrylamide-co-methacrylic acid-co-octadecylacrylate) (P(NIPAM-co-MAA-co-ODA)) and glucose oxidase (GOD). The maximum enzymatic activity of copolymer conjugated GOD (Polym-GOD) was observed around pH 5.0 and the value was about 40% of that of native GOD. Nine lysine residues per GOD molecule, on average, were found to be covalently attached to the copolymers. Egg phosphatidylcholine liposomes bearing Polym-GOD released their contents in response to the concentration of glucose and the sensitivity was higher than dipalmitoylphosphatidylcholine liposomes.     

Serum-induced leakage of liposome contents

Efflux of contents from small unilamellar vesicles of various compositions, containing a highly quenched fluorescent compound (calcein, 175 mM) was determined as a function of temperature in the presence and absence of human serum. Efflux of calcein from the liposomes was monitored as an increase in fluorescence as calcein became dequenched upon release from the liposomes. The presence of serum significantly increased liposome leakage in all cases. Incorporation of increasing molar ratios of cholesterol into liposomes reduced leakage of calcein from liposomes incubated with buffer and with serum. Leakage was significantly faster from liposomes with an osmotic gradient across the membrane (higher inside) than from equiosmolar liposomes. The leakage of [¹⁴C]sucrose from egg lecithin liposomes at 37°C was also dramatically increased in the presence of serum.     

Sol-gel transition temperature of PLGA-g-PEG aqueous solutions

Aqueous solutions of poly(DL-lactic acid-co-glycolic acid)-g-poly(ethylene glycol) copolymers exhibited sol-to-gel transition with increasing temperature. Further increase in temperature makes the system flow and form a sol phase again. Subcutaneous injection of a copolymer aqueous solution (0.5 mL) resulted in a formation of a hydrogel depot by temperature-sensitive sol-to-gel transition in a rat model. The reliable determination and control of sol-to-gel transition temperatures are the most important issues for this kind of sol-gel reversible hydrogel. The sol-to-gel transition temperature determined by the test tube inverting method, falling ball method, and dynamic mechanical analysis coincided within 1-2 degrees C. Fine tuning of the sol-to-gel transition temperature was achieved by varying the ionic strength of the polymer solutions and by mixing two polymer aqueous solutions with different sol-to-gel transition temperatures. The sol-to-gel transition temperature of polymer mixture aqueous solutions was well described by an empirical equation of miscible blends, indicating miscibility of the two polymer systems in water on the molecular level.     

Development of a liposomal delivery system for temperature-triggered release of a tumor targeting agent, Ln(III)-DOTA-phenylboronate

Liposomes, capable of temperature-triggered content release at the site of interest, can be of great importance for imaging and therapy of tumors. The delivery of imaging agents or therapeutics can be improved by application of liposomes with a gel-to-liquid phase-transition temperature suitable for mild hyperthermia (41-43 °C), and by prolonging their circulation time by incorporation of lipids containing polyethyleneglycol moieties. Still, the rapid wash out of the delivered material from the tumor tissue is a major obstacle for both imaging and therapy. In this study, we developed an optimized temperature sensitive liposomal system to be used with mild hyperthermia: highly stable at physiological temperature and with a sharp transition of the bilayer at 41.5 °C, with subsequent rapid release of entrapped compounds such as calcein or tumor cell-targeting contrast agents. Intravital microscopy on calcein/rhodamine containing liposomes was applied to demonstrate the applicability of this system in vivo. The calcein loaded liposomes were injected iv into nude mice with a human BLM melanoma tumor implanted in a dorsal skin-fold window chamber. Arrival of the liposomes at the tumor site and content release after temperature increase were monitored. The results demonstrated not only accumulation of the liposomes at the tumor site, but also a massive release of calcein after increase of the temperature to 41 °C. The versatility of the thermosensitive liposomes was further demonstrated by encapsulation of a tumor cell-targeting DOTA-phenylboronate conjugate and its release at elevated temperatures. The DOTA ligand in this system is able to chelate a variety of metals suitable for both diagnostic and therapeutic applications, whereas the phenylboronate function is able to target specifically to tumor cells through a covalent binding with sialic acid moieties over-expressed on their surface upon heat-triggered release from the liposomal carrier.     

pH-dependent bilayer destabilization and fusion of phospholipidic large unilamellar vesicles induced by diphtheria toxin and its fragments A and B

The passage by the low endosomal pH is believed to be an essential step of the diphtheria toxin (DT) intoxication process in vivo. Several studies have suggested that this low pH triggers the insertion of DT into the membrane. We demonstrate here that its insertion into large unilamellar vesicles (LUV) is accompanied by a strong destabilization of the vesicles at low pH. The destabilization has been studied by following the release of a fluorescent dye (calcein) encapsulated in the liposomes. The influence of the lipid composition upon this process has been examined. At a given pH, the calcein release is always faster for a negatively charged (asolectin) than for a zwitterionic (egg PC) system. Moreover, the transition pH, which is the pH at which the toxin-induced release becomes significant, is shifted upward for the asolectin LUV as compared to the egg PC LUV. No calcein release is observed for rigid phospholipid vesicles (DPPC and DPPC/DPPA 9/1 mol/mol) below their transition temperature whereas DT induces an important release of the dye in the temperature range corresponding to the phase transition. The transition pH associated to the calcein release from egg PC vesicles is identical with that corresponding to the exposure of the DT hydrophobic domains, as revealed here by the binding of a hydrophobic probe (ANS) to the toxin. This suggests the involvement of these domains in the destabilization process. Both A and B fragments destabilize asolectin and PC vesicles in a pH-dependent manner but to a lesser extent than the entire toxin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Polymer principles of protein calorimetric two-state cooperativity

The experimental calorimetric two-state criterion requires the van't Hoff enthalpy DeltaH(vH) around the folding/unfolding transition midpoint to be equal or very close to the calorimetric enthalpy DeltaH(cal) of the entire transition. We use an analytical model with experimental parameters from chymotrypsin inhibitor 2 to elucidate the relationship among several different van't Hoff enthalpies used in calorimetric analyses. Under reasonable assumptions, the implications of these DeltaH(vH)'s being approximately equal to DeltaH(cal) are equivalent: Enthalpic variations among denatured conformations in real proteins are much narrower than some previous lattice-model estimates, suggesting that the energy landscape theory "folding to glass transition temperature ratio" T(f) /T(g) may exceed 6.0 for real calorimetrically two-state proteins. Several popular three-dimensional lattice protein models, with different numbers of residue types in their alphabets, are found to fall short of the high experimental standard for being calorimetrically two-state. Some models postulate a multiple-conformation native state with substantial pre-denaturational energetic fluctuations well below the unfolding transition temperature, or predict a significant post-denaturational continuous conformational expansion of the denatured ensemble at temperatures well above the transition point, or both. These scenarios either disagree with experiments on protein size and dynamics, or are inconsistent with conventional interpretation of calorimetric data. However, when empirical linear baseline subtractions are employed, the resulting DeltaH(vH)/DeltaH(cal)'s for some models can be increased to values closer to unity, and baseline subtractions are found to correspond roughly to an operational definition of native-state conformational diversity. These results necessitate a re-assessment of theoretical models and experimental interpretations.     

Thermogelling aqueous solutions of alternating multiblock copolymers of poly(L-lactic acid) and poly(ethylene glycol)

We are reporting alternating multiblock copolymers of poly(L-lactic acid)/poly(ethylene glycol) aqueous solution (> 15 wt %) undergoing sol-gel-sol transition as the temperature increases from 20 to 60 degrees C. Micelles of the multiblock copolymers (in water) are about 20 nm in radius at low temperature. They are aggregated to a larger size as the temperature increases, which should play a critical role in the sol-to-gel transition. The transition temperature and gel window were affected by the molecular weight and composition of the multiblock copolymer. In particular, the aqueous solution of an alternating multiblock copolymer (Mn approximately 6700 daltons) prepared from poly(ethylene glycol) (Mn approximately 600 daltons) and poly(L-lactic acid) (Mn approximately 1300 daltons) showed a maximum modulus at body temperature (37 degrees C). The in situ gel forming ability of the polymer aqueous solution in vivo as well as in vitro indicates that it can be a promising injectable biomaterial.     

Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate)

Amphiphilic block copolymers were synthesized by transesterification of hydrophilic methoxy poly(ethylene glycol) (mPEG) and hydrophobic poly(propylene fumarate) (PPF) and characterized. Four block copolymers were synthesized with a 2:1 mPEG:PPF molar ratio and mPEGs of molecular weights 570, 800, 1960, and 5190 and PPF of molecular weight 1570 as determined by NMR. The copolymers synthesized with mPEG of molecular weights 570 and 800 had 1.9 and 1.8 mPEG blocks per copolymer, respectively, as measured by NMR, representing an ABA-type block copolymer. The number of mPEG blocks of the copolymer decreased with increasing mPEG block length to as low as 1.5 mPEG blocks for copolymer synthesized with mPEG of molecular weight 5190. At a concentration range of 5-25 wt % in phosphate-buffered saline, copolymers synthesized with mPEG molecular weights of 570 and 800 possessed lower critical solution temperatures (LCST) between 40 and 45 degrees C and between 55 and 60 degrees C, respectively. Aqueous solutions of copolymer synthesized with mPEG 570 and 800 also experienced thermoreversible gelation. The sol-gel transition temperature was dependent on the sodium chloride concentration as well as the mPEG block length. The copolymer synthesized from mPEG 570 had a transition temperature between 40 and 20 degrees C with salt concentrations between 1 and 10 wt %, while the sol-gel transition temperatures of the copolymer synthesized from mPEG molecular weight 800 were higher in the range 75-30 degrees C with salt concentrations between 1 and 15 wt %. These novel thermoreversible copolymers are the first biodegradable copolymers with unsaturated double bonds along their macromolecular chain that can undergo both physical and chemical gelation and hold great promise for drug delivery and tissue engineering applications.     

Interactions of antigen-sensitized liposomes with immobilized antibody: a homogeneous solid-phase immunoliposome assay

Dioleoyl phosphatidylethanolamine (DOPE) does not form stable bilayer liposomes at room temperature and neutral pH. However, stable unilamellar liposomes could be prepared by mixing DOPE with a minimum of 12% of a haptenated lipid, N-(dinitrophenylaminocaproyl)-phosphatidylethanolamine (DNP-cap-PE). When the liposomes bound to rabbit anti-DNP IgG that had been adsorbed on a glass surface, lysis of the liposome occurred with the release of the contents into the medium as judged by the fluorescence enhancement of an entrapped self-quenching dye, calcein. On the other hand, incubation of the same liposomes with glass surfaces coated with normal rabbit IgG had little effect. In addition, free anti-DNP IgG induced aggregation of the liposomes but did not cause any dye release. Liposomes composed of dioleoyl phosphatidylcholine (DOPC) and DNP-cap-PE did not lyse when added to the glass surfaces coated with either anti-DNP IgG or normal IgG. A likely mechanism for liposome lysis is that the DNP-cap-PE laterally diffuse to the contact area between the liposome and the glass. Binding of the haptenated lipid with the immobilized and multivalent antibody trap the haptenated lipids in the contact area. As a result of lateral phase separation, lipids may undergo the bilayer to hexagonal phase transition, leading to the leakage of the entrapped dye. Because both the free hapten and the free antibody inhibited the liposome leakage, this process could be used to assay for the free hapten or antibody. We have shown that inhibition assays performed by using this principle can easily detect 10 pmol of free DNP-glycine in 40 microliter. Furthermore, by substituting human glycophorin A, a transmembrane glycoprotein, for the lipid hapten, we have demonstrated that this assay system is also applicable to detect protein antigen with a sensitivity of sub-nanogram level.     

Pressure perturbation and differential scanning calorimetric studies of bipolar tetraether liposomes derived from the thermoacidophilic archaeon Sulfolobus acidocaldarius

Differential scanning calorimetry (DSC) and pressure perturbation calorimetry (PPC) were used to characterize thermal phase transitions, membrane packing, and volumetric properties in multilamellar vesicles (MLVs) composed of the polar lipid fraction E (PLFE) isolated from the thermoacidophilic archaeon Sulfolobus acidocaldarius grown at different temperatures. For PLFE MLVs derived from cells grown at 78 degrees C, the first DSC heating scan exhibits an endothermic transition at 46.7 degrees C, a small hump near 60 degrees C, and a broad exothermic transition at 78.5 degrees C, whereas the PPC scan reveals two transitions at approximately 45 degrees C and 60 degrees C. The endothermic peak at 46.7 degrees C is attributed to a lamellar-to-lamellar phase transition and has an unusually low DeltaH (3.5 kJ/mol) and DeltaV/V (0.1%) value, as compared to those for the main phase transitions of saturated diacyl monopolar diester lipids. This result may arise from the restricted trans-gauche conformational changes in the dibiphytanyl chain due to the presence of cyclopentane rings and branched methyl groups and due to the spanning of the lipid molecules over the whole membrane. The exothermic peak at 78.5 degrees C probably corresponds to a lamellar-to-cubic phase transition and exhibits a large and negative DeltaH value (-23.2 kJ/mol), which is uncommon for normal lamellar-to-cubic phospholipid phase transformations. This exothermic transition disappears in the subsequent heating scans and thus may involve a metastable phase, which is irreversible at the scan rate used. Further, there is no distinct peak in the plot of the thermal expansion coefficient alpha versus temperature near 78.5 degrees C, indicating that this lamellar-to-cubic phase transition is not accompanied by any significant volume change. For PLFE MLVs derived from cells grown at 65 degrees C, similar DSC and PPC profiles and thermal history responses were obtained. However, the lower growth temperature yields a higher DeltaV/V ( approximately 0.25%) and DeltaH (14 kJ/mol) value for the lamellar-to-lamellar phase transition measured at the same pH (2.1). A lower growth temperature also generates a less negative temperature dependence of alpha. The changes in DeltaV/V, DeltaH, and the temperature dependence of alpha can be attributed to the decrease in the number of cyclopentane rings in PLFE at the lower growth temperature. The relatively low DeltaV/V and small DeltaH involved in the phase transitions help to explain why PLFE liposomes are remarkably thermally stable and also echo the proposal that PLFE liposomes are generally rigid and tightly packed. These results help us to understand why, despite the occurrence of thermal-induced phase transitions, PLFE liposomes exhibit a remarkably low temperature sensitivity of proton permeation and dye leakage.     

Preparation and Investigation of Sustained Drug Delivery Systems Using an Injectable, Thermosensitive, In Situ Forming Hydrogel Composed of PLGA–PEG–PLGA

In situ gelling systems are very attractive for pharmaceutical applications due to their biodegradability and simple manufacturing processes. The synthesis and characterization of thermosensitive poly(D,L-lactic-co-glycolic acid) (PLGA)-polyethylene glycol (PEG)-PLGA triblock copolymers as in situ gelling matrices were investigated in this study as a drug delivery system. Ring-opening polymerization using microwave irradiation was utilized as a novel technique, and the results were compared with those using a conventional method of polymerization. The phase transition temperature and the critical micelle concentration (CMC) of the copolymer solutions were determined by differential scanning calorimetry and spectrophotometry, respectively. The size of the micelles was determined with a light scattering method. In vitro drug release studies were carried out using naltrexone hydrochloride and vitamin B12 as model drugs. The rate and yield of the copolymerization process via microwave irradiation were higher than those of the conventional method. The copolymer structure and concentration played critical roles in controlling the sol-gel transition temperature, the CMC, and the size of the nanomicelles in the copolymer solutions. The rate of drug release could be modulated by the molecular weight of the drugs, the concentration of the copolymers, and their structures in the formulations. The amount of release versus time followed zero-order release kinetics for vitamin B12 over 25 days, in contrast to the Higuchi modeling for naltrexone hydrochloride over a period of 17 days. In conclusion, PLGA-PEG1500-PLGA with a lactide-to-glycolide ratio of 5:1 is an ideal system for the long-acting, controlled release of naltrexone hydrochloride and vitamin B12.