BfpB, an outer membrane lipoprotein required for the biogenesis of bundle-forming pili in enteropathogenic Escherichia coli.

The bundle-forming pili (BFP) of enteropathogenic Escherichia coli are believed to play a role in pathogenesis by causing the formation of bacterial microcolonies that bind epithelial surfaces of the small intestine. This in vivo process is mimicked in vitro by the autoaggregation and localized adherence phenotypes. Expression of BFP, a member of the type IV pilus family, requires the enteroadherence factor (EAF) plasmid, which contains bfpA, the gene that encodes the principal structural subunit of BFP. Immediately downstream of bfpA are 13 open reading frames transcribed in the same direction as bfpA; together with bfpA, these compose the bfp gene cluster. Disruption of bfpB, the second open reading frame downstream of bfpA, was performed by allelic exchange. The resulting mutant, B171-8deltaB, did not exhibit the autoaggregation or localized adherence phenotype or produce BFP filaments. Thus, BfpB is required for pilus biogenesis. However, BfpA was produced at wild-type levels and processed normally by B171-8deltaB, indicating that BfpB acts at a step in the BFP biogenic pathway after production and processing of the structural subunit. Biochemical and cell fractionation studies showed that BfpB is a 58-kDa lipoprotein that is located primarily in the outer membrane. Assays of bfpA and bfpB mRNAs and protein expression showed that both genes are cotranscribed as part of an environmentally responsive operon that is regulated by growth phase and ammonium.     

A cluster of fourteen genes from enteropathogenic Escherichia coli is sufficient for the biogenesis of a type IV pilus

Enteropathogenic Escherichia coli (EPEC) adhere to epithelial cells in microcolonies, a pattern termed localized adherence (LA). LA is dependent upon the presence of 50–70MDa plasmids, termed EPEC adherence factor (EAF) plasmids. Expression of an EAF plasm id-encoded type IV fimbria, the bundle-forming pilus (BFP), is associated with the LA phenotype. TnphoA insertions in bfpA, the gene encoding the major structural subunit of the BFP, abolish LA. While bfpA::TnphoA mutants cannot be complemented for LA by plasmids carrying the bfpA gene alone in trans, this work shows that they can be complemented by plasmids carrying the bfpA gene, as well as approximately 10kb of downstream sequence, suggesting that such mutations have polar effects on downstream genes. The identification and characterization of a cluster of 13 genes immediately downstream of bfpA are described. The introduction into a laboratory Escherichia coli strain of a plasmid containing these 14 bfp gene cluster genes, along with pJPN14, a plasmid containing another fragment derived from the EAF plasmid, confers LA ability and BFP biogenesis. However, when a mutation is introduced into the last gene of the bfp cluster, neither LA nor BFP biogenesis is conferred. This work also provides evidence to show that the fragment cloned in pJPN14 encodes a factor(s) which results in increased levels of the pilin protein. Finally, it is shown that expression of the 14 genes in the bfp cluster from an IPTG-inducible promoter, in the absence of pJPN14, is sufficient to reconstitute BFP biogenesis in a laboratory E. cob strain, but is insufficient for LA. This is the first report demonstrating the reconstitution of a type IV pilus in a laboratory E. coli strain with a defined set of genes. The 8FP system should prove to be a useful model for studying the molecular mechanisms of type IV pilus biogenesis.     

The type IV pilus assembly complex: biogenic interactions among the bundle-forming pilus proteins of enteropathogenic Escherichia coli

Production of type IV bundle-forming pili (BFP) by enteropathogenic Escherichia coli (EPEC) requires the protein products of 12 genes of the 14-gene bfp operon. Antisera against each of these proteins were used to demonstrate that in-frame deletion of individual genes within the operon reduces the abundance of other bfp operon-encoded proteins. This result was demonstrated not to be due to downstream polar effects of the mutations but rather was taken as evidence for protein-protein interactions and their role in the stabilization of the BFP assembly complex. These data, combined with the results of cell compartment localization studies, suggest that pilus formation requires the presence of a topographically discrete assembly complex that is composed of BFP proteins in stoichiometric amounts. The assembly complex appears to consist of an inner membrane component containing three processed, pilin-like proteins, BfpI, -J, and -K, that localize with BfpE, -L, and -A (the major pilin subunit); an outer membrane, secretin-like component, BfpB and -G; and a periplasmic component composed of BfpU. Of these, only BfpL consistently localizes with both the inner and outer membranes and thus, together with BfpU, may articulate between the Bfp proteins in the inner membrane and outer membrane compartments.     

Lack of expression of bundle-forming pili in some clinical isolates of enteropathogenic Escherichia coli (EPEC) is due to a conserved large deletion in the bfp operon

Enteropathogenic Escherichia coli (EPEC) produces a plasmid-encoded type IV pilus, called the bundle-forming pilus (BFP), involved in the formation of the localized adhesion onto epithelial cells. In this study, we demonstrate that clinical isolates of serotypes O128ab:H2 and O119:H2 contain a ca. 13-kb deletion in the bfp operon, resulting in a lack of expression of these pili. An IS sequence with homology to the IS66 of Agrobacterium tumefaciens replaced the deleted bfp genes. These results suggest that the bfp operon was deleted through a transpositional event and that other adherence factors may mediate attachment of these bacteria to the host cells.     

Structural and topographical studies of the type IV bundle-forming pilus assembly complex of enteropathogenic Escherichia coli

The type IV bundle-forming pili (BFP) of enteropathogenic Escherichia coli (EPEC) are required for virulence in orally challenged human volunteers and for the localized adherence and autoaggregation in vitro phenotypes. BFP filament biogenesis and function are encoded by the 14-gene bfp operon. The BFP assembly complex, containing a BfpB-His6 fusion protein, was chemically cross-linked in situ, and the complex was then purified from BFP-expressing EPEC by a combination of nickel- and BfpB antibody-based affinity chromatography. Characterization of the isolated complex by immunoblotting using BFP protein-specific antibodies showed that at least 10 of the 14 proteins specified by the bfp operon physically interact to form an oligomeric complex. Proteins localized to the outer membrane, inner membrane, and periplasm are within this complex, thus demonstrating that the complex spans the periplasmic space. A combination of immunofluorescence and immuno-gold thin-section transmission electron microscopy studies localized this complex to one pole of the cell.     

Enteropathogenic Escherichia coli: identification of a gene cluster coding for bundle-forming pilus morphogenesis.

Sequence flanking the bfpA locus on the enteroadherent factor plasmid of the enteropathogenic Escherichia coli (EPEC) strain B171-8 (O111:NM) was obtained to identify genes that might be required for bundle-forming pilus (BFP) biosynthesis. Deletion experiments led to the identification of a contiguous cluster of at least 12 open reading frames, including bfpA, that could direct the synthesis of a morphologically normal BFP filament. Within the bfp gene cluster, we identified open reading frames that share homology with other type IV pilus accessory genes and with genes required for transformation competence and protein secretion. Immediately upstream of the bfp gene cluster, we identified a potential replication origin including genes that are predicted to encode proteins homologous with replicase and resolvase. Restriction fragment length polymorphism analysis of DNA from six additional EPEC serotypes showed that the organization of the bfp gene cluster and its juxtaposition with a potential plasmid origin of replication are highly conserved features of the EPEC biotype.     

Novel Topology of BfpE, a Cytoplasmic Membrane Protein Required for Type IV Fimbrial Biogenesis in Enteropathogenic Escherichia coli

Enteropathogenic Escherichia coli (EPEC) produces the bundle-forming pilus (BFP), a type IV fimbria that has been implicated in virulence, autoaggregation, and localized adherence to epithelial cells. The bfpE gene is one of a cluster of bfp genes previously shown to encode functions that direct BFP biosynthesis. Here, we show that an EPEC strain carrying a nonpolar mutation in bfpE fails to autoaggregate, adhere to HEp-2 cells, or form BFP, thereby demonstrating that BfpE is required for BFP biogenesis. BfpE is a cytoplasmic membrane protein of the GspF family. To determine the membrane topology of BfpE, we fused bfpE derivatives containing 3' truncations and/or internal deletions to alkaline phosphatase and/or beta-galactosidase reporter genes, whose products are active only when localized to the periplasm or cytoplasm, respectively. In addition, we constructed BfpE sandwich fusions using a dual alkaline phosphatase/beta-galactosidase reporter cassette and analyzed BfpE deletion derivatives by sucrose density flotation gradient fractionation. The data from these analyses support a topology in which BfpE contains four hydrophobic transmembrane (TM) segments, a large cytoplasmic segment at its N terminus, and a large periplasmic segment near its C terminus. This topology is dramatically different from that of OutF, another member of the GspF family, which has three TM segments and is predominantly cytoplasmic. These findings provide a structural basis for predicting protein-protein interactions required for assembly of the BFP biogenesis machinery.     

The plasmid R64 thin pilus identified as a type IV pilus.

The entire nucleotide sequence of the pil region of the IncI1 plasmid R64 was determined. Analysis of the sequence indicated that 14 genes, designated pilI through pilV, are involved in the formation of the R64 thin pilus. Protein products of eight pil genes were identified by the maxicell procedure. The pilN product was shown to be a lipoprotein by an experiment using globomycin. A computer search revealed that several R64 pil genes have amino acid sequence homology with proteins involved in type IV pilus biogenesis, protein secretion, and transformation competence. The pilS and pilV products were suggested to be prepilins for the R64 thin pilus, and the pilU product appears to be a prepilin peptidase. These results suggest that the R64 thin pilus belongs to the type IV family, specifically group IVB, of pili. The requirement of the pilR and pilU genes for R64 liquid mating was demonstrated by constructing their frameshift mutations. Comparison of three type IVB pilus biogenesis systems, the pil system of R64, the toxin-coregulated pilus (tcp) system of Vibrio cholerae, and the bundle-forming pilus (bfp) system of enteropathogenic Escherichia coli, suggests that they have evolved from a common ancestral gene system.     

Classification of perA sequences and their correlation with autoaggregation in typical enteropathogenic Escherichia coli isolates collected in Japan and Thailand

Enteropathogenic Escherichia coli (EPEC) strains produce a bundle‐forming pilus (BFP) that mediates localized adherence (LA) to intestinal epithelial cells. The major structural subunit of the BFP is bundlin, which is encoded by the bfpA gene located on a large EAF plasmid. The perA gene has been shown to activate genes within the bfp operon. We analyzed perA gene polymorphism among typical (eae‐ and bfpA‐ positive) EPEC strains isolated from healthy and diarrheal persons in Japan (n= 27) and Thailand (n= 26) during the period 1995 to 2007 and compared this with virulence and phenotypic characteristics. Eight genotypes of perA were identified by heteroduplex mobility assay (HMA). The strains isolated in Thailand showed strong autoaggregation and had an intact perA, while most of those isolated in Japan showed weak or no autoaggregation, and had a truncated perA due to frameshift mutation. The degree of autoaggregation was well correlated with adherence to HEp‐2 cells, contact hemolysis and BFP expression. Our results showed that functional deficiency due to frameshift mutation and subsequent nonsense mutation in perA reduced BFP expression in typical EPEC strains isolated in Japan.     

Twelve pil genes are required for biogenesis of the R64 thin pilus

The IncI1 plasmid R64 produces two kinds of sex pili: a thin pilus and a thick pilus. The thin pilus, which belongs to the type IV family, is required only for liquid matings. Fourteen genes, pilI to -V, were found in the DNA region responsible for the biogenesis of the R64 thin pilus (S.-R. Kim and T. Komano, J. Bacteriol. 179:3594-3603, 1997). In this study, we introduced frameshift mutations into each of the 14 pil genes to test their requirement for R64 thin pilus biogenesis. From the analyses of extracellular secretion of thin pili and transfer frequency in liquid matings, we found that 12 genes, pilK to -V, are required for the formation of the thin pilus. Complementation experiments excluded the possible polar effects of each mutation on the expression of downstream genes. Two genes, traBC, were previously shown to be required for the expression of the pil genes. In addition, the rci gene is responsible for modulating the structure and function of the R64 thin pilus via the DNA rearrangement of the shufflon. Altogether, 15 genes, traBC, pilK through pilV, and rci, are essential for R64 thin pilus formation and function.     

Characterization of type IV pilus genes in plant growth-promoting Pseudomonas putida WCS358.

In a search for factors that could contribute to the ability of the plant growth-stimulating Pseudomonas putida WCS358 to colonize plant roots, the organism was analyzed for the presence of genes required for pilus biosynthesis. The pilD gene of Pseudomonas aeruginosa, which has also been designated xcpA, is involved in protein secretion and in the biogenesis of type IV pili. It encodes a peptidase that processes the precursors of the pilin subunits and of several components of the secretion apparatus. Prepilin processing activity could be demonstrated in P. putida WCS358, suggesting that this nonpathogenic strain may contain type IV pili as well. A DNA fragment containing the pilD (xcpA) gene of P. putida was cloned and found to complement a pilD (xcpA) mutation in P. aeruginosa. Nucleotide sequencing revealed, next to the pilD (xcpA) gene, the presence of two additional genes, pilA and pilC, that are highly homologous to genes involved in the biogenesis of type IV pili. The pilA gene encodes the pilin subunit, and pilC is an accessory gene, required for the assembly of the subunits into pili. In comparison with the pil gene cluster in P. aeruginosa, a gene homologous to pilB is lacking in the P. putida gene cluster. Pili were not detected on the cell surface of P. putida itself, not even when pilA was expressed from the tac promoter on a plasmid, indicating that not all the genes required for pilus biogenesis were expressed under the conditions tested. Expression of pilA of P. putida in P. aeruginosa resulted in the production of pili containing P. putida PilA subunits.     

The pilH gene encodes an ABC transporter homologue required for type IV pilus biogenesis and social gliding motility in Myxococcus xanthus

Type IV pilus genes have been shown to be required for social gliding motility in Myxococcus xanthus . We report the discovery of four additional pil genes: pilD , a homologue of type IV prepilin leader peptidases; and pilG , pilH and pilI , which have no known homologues in other type IV pilus systems. pilH encodes an ATP-binding cassette (ABC) transporter homologue, the first such homologue to be required for the biogenesis of any bacterial pilus type. pilG and pilI are co-transcribed with pilH and appear to be functionally related to pilH . Null mutants of pilG , pilH and pilI all lack social motility, are deficient in pilus production, have elevated sporulation efficiencies and display similar developmental abnormalities. In addition, all three mutations reduced the amount of PilA found in the supernatant after cells were sedimented from liquid culture. We suggest that the products of these three genes form a single ABC exporter complex, in which pilI is an integral membrane protein with membrane-spanning domains, and pilG is an accessory factor. The complex may participate in pilus assembly and/or the export of PilA pilin.     

Molecular analysis of genes in Nostoc punctiforme involved in pilus biogenesis and plant infection

Hormogonia are the infective agents in many cyanobacterium-plant symbioses. Pilus-like appendages are expressed on the hormogonium surface, and mutations in pil-like genes altered surface piliation and reduced symbiotic competency. This is the first molecular evidence that pilus biogenesis in a filamentous cyanobacterium requires a type IV pilus system.     

Cloning of an Aeromonas hydrophila type IV pilus biogenesis gene cluster: complementation of pilus assembly functions and characterization of a type IV leader peptidase/N-methyltransferase required for extracellular protein secretion

Aeromonas hydrophila secretes several extracellular proteins that are associated with virulence including an enterotoxin, a protease, and the hole-forming toxin, aerolysin. These degradative enzymes and toxins are exported by a conserved pathway found in many Gram-negative bacteria. In Pseudomonas aeruginosa this export pathway and type IV pilus biogenesis are dependent on the product of the pilD gene. PilD is a bifunctional enzyme that processes components of the extracellular secretory pathway as well as a type IV prepilin. An A. hydrophila genomic library was transferred into a P. aeruginosa pilD mutant that is defective for type IV pilus biogenesis. The A. hydrophila pilD homologue, tapD , was identified by its ability to complement the pilD mutation in P. aeruginosa . Transconjugants containing tapD were sensitive to the type IV pilus-specific phage, PO4. Sequence data revealed that tapD is part of a cluster of genes ( tapABCD ) that are homologous to P. aeruginosa type IV pilus biogenesis genes ( pilABCD ). We showed that TapB and TapC are functionally homologous to P. aeruginosa PilB and PilC, the first such functional complementation of pilus assembly demonstrated between bacteria that express type IV pili. In vitro studies revealed that TapD has both endopeptidase and N -methyltransferase activities using P. aeruginosa prepilin as substrate. Furthermore, we show that tapD is required for extracellular secretion of aerolysin and protease, indicating that tapD may play an important role in the virulence of A. hydrophila     

Differentiation of typical and atypical enteropathogenic Escherichia coli using colony immunoblot for detection of bundle‐forming pilus expression

Aims: The aim of study was to develop a colony immunoblot assay to differentiate typical from atypical enteropathogenic Escherichia coli (EPEC) by detection of bundle‐forming pilus (BFP) expression. Methods and Results: Anti‐BFP antiserum was raised in rabbits and its reactivity was confirmed by immunoelectron microscopy and by immunoblotting recognizing bundlin, the major pilus repeating subunit. The bacterial isolates tested in the colony immunoblot assay were grown in different media. Proteins from bacterial isolates were transferred to nitrocellulose membrane after treatment with phosphate buffer containing Triton X‐100, EDTA and sodium chloride salts. When 24 typical EPEC and 96 isolates including, 72 atypical EPEC, 13 Gram‐negative type IV‐expressing strains and 11 enterobacteriaceae were cultivated in Dulbecco’s Modified Eagle’s Medium agar containing fetal bovine serum or in blood agar in the presence of CaCl₂, they showed a positivity of 92 and 83%, and specificity of 96 and 97%, respectively. Conclusion: The assay enables reliable identification of BFP‐expressing isolates and contributes to the differentiation of typical and atypical EPEC. Significance and Impact of the Study: The colony immunoblot for BFP detection developed in this study combines the simplicity of an immunoserological assay with the high efficiency of testing a large number of EPEC colonies.     

The inner membrane subassembly of the enteropathogenic Escherichia coli bundle-forming pilus machine

Type IV pili (Tfps) are filamentous surface appendages expressed by Gram-negative microorganisms and play numerous roles in bacterial cell biology. Tfp biogenesis machineries are highly conserved and resemble protein secretion and DNA uptake systems. Although components of Tfp biogenesis systems have been identified, it is not known how they interact to form these machineries. Using the bundle-forming pilus (BFP) of enteropathogenic Escherichia coli as a model Tfp system, we provide evidence of a cytoplasmic membrane subassembly of the Tfp assembly machine composed of putative cytoplasmic nucleotide-binding and cytoplasmic membrane proteins. A combination of genetic, biochemical and biophysical approaches revealed interactions among putative cytoplasmic nucleotide-binding proteins BfpD and BfpF and cytoplasmic membrane proteins BfpC and BfpE of the BFP biogenesis machine. The polytopic membrane protein BfpE appears to be a central component of this subassembly as it interacts with BfpC, BfpD and BfpF. We report that BFP biogenesis probably requires interactions among BfpC, BfpD and BfpE, whereas BFP retraction requires interaction of the PilT-like putative ATPase BfpF with a conserved domain of BfpE. BfpE is the first protein that is not a member of the PilT family to be implicated in Tfp retraction. Furthermore, we found that the putative ATPases BfpD and BfpF play antagonistic roles in BFP biogenesis and retraction, respectively, by interacting with distinct domains of the BFP biogenesis machine.     

Outer membrane targeting, ultrastructure, and single molecule localization of the enteropathogenic Escherichia coli type IV pilus secretin BfpB

Type IV pili (T4P) are filamentous surface appendages required for tissue adherence, motility, aggregation, and transformation in a wide array of bacteria and archaea. The bundle-forming pilus (BFP) of enteropathogenic Escherichia coli (EPEC) is a prototypical T4P and confirmed virulence factor. T4P fibers are assembled by a complex biogenesis machine that extrudes pili through an outer membrane (OM) pore formed by the secretin protein. Secretins constitute a superfamily of proteins that assemble into multimers and support the transport of macromolecules by four evolutionarily ancient secretion systems: T4P, type II secretion, type III secretion, and phage assembly. Here, we determine that the lipoprotein transport pathway is not required for targeting the BfpB secretin protein of the EPEC T4P to the OM and describe the ultrastructure of the single particle averaged structures of the assembled complex by transmission electron microscopy. Furthermore, we use photoactivated localization microscopy to determine the distribution of single BfpB molecules fused to photoactivated mCherry. In contrast to findings in other T4P systems, we found that BFP components predominantly have an uneven distribution through the cell envelope and are only found at one or both poles in a minority of cells. In addition, we report that concurrent mutation of both the T4bP secretin and the retraction ATPase can result in viable cells and found that these cells display paradoxically low levels of cell envelope stress response activity. These results imply that secretins can direct their own targeting, have complex distributions and provide feedback information on the state of pilus biogenesis.     

PilP, a pilus biogenesis lipoprotein in Neisseria gonorrhoeae, affects expression of PilQ as a high-molecular-mass multimer

Studies of gonococcal pilus biogenesis are fundamental to understanding organelle structure/function relationships and identifying new approaches to controlling disease. This area of research is also relevant to elucidating the basic mechanisms of outer membrane translocation of macromolecules, which requires components highly related to those involved in type IV pilus expression. Previous studies have shown that products of several ancillary pil genes are required for organelle biogenesis but of these only PilQ, a member of the GspD protein family, is a component of the outer membrane. DNA sequencing of the region upstream of pilQ revealed the presence of two open reading frames (ORFs) whose deduced polypeptides shared significant identities with proteins required for pilus expression in Pseudomonas aeruginosa and Pseudomonas syringae, the genes for which are arrayed upstream of a gene encoding a PilQ homologue. Gonococcal mutants bearing transposon insertions in these ORFs were non-piliated and failed to express pilus-associated phenotypes, and the corresponding genes were designated pilO and pilP. The piliation defects in the mutants could not be ascribed to polarity on distal pilQ expression as shown by direct measurement of PilQ antigen in those backgrounds and the use of a novel technique to create tandem duplications in the gonococcus (Gc) genome. As predicted by the presence of a consensus lipoprotein signal sequence, PilP expressed in both Escherichia coli and Gc could be labelled with [³H]-palmitic acid. PilP^? as well as PilQ^? mutants shed PilC, a protein which facilitates pilus assembly and is implicated in epithelial cell adherence, in a soluble form. Combined with the finding that levels of multimerized PilQ were greatly reduced in PilP^? mutants, the results suggest that PilP is required for PilQ function and that PilQ and PilC may interact during the terminal stages of pilus biogenesis. The findings also support the hypothesis that the Gc PilQ multimer corresponds to a physiologically relevant form of the protein required for pilus biogenesis.