Nanoreinforcement of poly(propylene fumarate)-based networks with surface modified alumoxane nanoparticles for bone tissue engineering

A novel composite material has been fabricated for bone tissue engineering scaffolds utilizing the biodegradable polymer poly(propylene fumarate)/poly(propylene fumarate)-diacrylate (PPF/PPF-DA) and surface-modified carboxylate alumoxane nanoparticles. Various surface-modified nanoparticles were added to the polymer including a surfactant alumoxane, an activated alumoxane, a mixed alumoxane containing both activated and surfactant groups, and a hybrid alumoxane containing both groups within the same substituent. These nanocomposites, as well as polymer resin and unmodified boehmite composites, underwent flexural and compressive mechanical testing and were examined using electron microscopy. Hybrid alumoxane nanoparticles dispersed in PPF/PPF-DA exhibited over a 3-fold increase in flexural modulus at 1 wt % loading compared to polymer resin alone. No significant loss of flexural or compressive strength was observed with increased loading of hybrid alumoxane nanoparticles. These dramatic improvements in flexural properties may be attributed to the fine dispersion of nanoparticles into the polymer and increased covalent interaction between polymer chains and surface modifications of nanoparticles.     

Synthesis and biological activity of polyriboadenylic acid: polyribo-5-dimethylaminouridylic acid hybrid (poly(A): poly(Me2N5U))

Poly-5-dimethylaminouridylic acid, (poly(Me2N5U)) has been synthesized by the conversion of 5-bromouridine-5'-monophosphate to 5-dimethylaminouridine-5'-monophosphate which was later made into the 5'-diphosphate and subsequently polymerized by PNPase. The polymer formed a 1:1 hybrid with poly(A) with the ability to induce the production of interferon in chick embryoes as certain doses of the hybrid protected chick embryoes against wesselsbron virus (H 10964).     

Feasibility of polysaccharide hybrid materials for scaffolds in cartilage tissue engineering: evaluation of chondrocyte adhesion to polyion complex fibers prepared from alginate and chitosan

The ideal cell-carrier material for cartilage regeneration should be one that closely mimics the natural environment in a living articular cartilage matrix. In the current study, we considered that alginate-based chitosan hybrid biomaterials could provide excellent supports for chondrocyte adhesion. To test this hypothesis, we investigated the adhesion behavior of rabbit chondrocytes onto an alginate polymer versus the adhesion of the chondrocytes onto some alginate-based chitosan hybrid polymer fibers in vitro. We demonstrated that the alginate-based chitosan hybrid polymer fibers showed much improved adhesion capacity with chondrocytes in comparison with alginate polymer fiber. Additionally, morphologic studies revealed maintenance of the characteristic round morphology of the chondrocyte and the dense fiber of the type II collagen produced by the chondrocytes in the hybrid polymer. On the basis of these results, we conclude that an alginate-based chitosan hybrid polymer fiber has considerable potential as a desirable biomaterial for cartilage tissue scaffolds.     

A carbohydrate-antioxidant hybrid polymer reduces oxidative damage in spermatozoa and enhances fertility

Gamete-gamete interactions are critically modulated by carbohydrate-protein interactions that rely on the carbohydrate-selective recognition of polyvalent carbohydrate structures. A galactose-binding protein has been identified in mammalian spermatozoa that has similarity to the well-characterized hepatic asialoglycoprotein receptor. With the aim of exploiting the ability of this class of proteins to bind and internalize macromolecules displaying galactose, we designed hybrid carbohydrate-antioxidant polymers to deliver antioxidant vitamin E (alpha-tocopherol) to porcine spermatozoa. Treatment of sperm cells with one hybrid polymer in particular produced large increases in intracellular sperm levels of alpha-tocopherol and greatly reduced endogenous fatty acid degradation under oxidative stress. The polymer-treated spermatozoa had enhanced physiological properties and longer half-lives, which resulted in enhanced fertilization rates. Our results indicate that hybrid polymer delivery systems can prolong the functional viability of mammalian spermatozoa and improve fertility rates, and that our functionally guided optimization strategy can be applied to the discovery of active glycoconjugate ligands.     

Photofunctional Eu/Tb hybrid material with inorganic silica covalently linking polymer chain through their double functionalization

In the context, 2-thiosalicylic acid (TSA) is modified with two crosslinking reagents (3-chloropropyltrimethoxysilane (CTPMS), 3-(triethoxysilyl)-propyl isocyanate (TESPIC)) to achieve two kinds of sulfide bridges (abbreviated as TSA-CSi and TSA-TSi, respectively). And two organic polymers (poly acrylamide (PAM) and poly ethylene glycol (PEG)) are also functionalized with TESPIC to form their polymeric silane derivatives PAMSi and PEGSi. Then series of multi-component Eu³⁺/Tb³⁺ hybrid material have been assembled with inorganic silica covalently linking organic polymer through the sulfide bridges after co-hydrolysis and co-polycondensation with the above inorganic or organic alkoxyl compounds (TSA-CSi(TSi), PAMSi(PEGSi)) and tetraethoxysilane (TEOS). These hybrid material are characterized in details to compare with the binary hybrid material without organic polymer unit, whose results reveal that the photoluminescence properties of the hybrid system are improved with the introduction of the polymer unit.     

Recent Advances in Polymer Electrolytes for Zinc Ion Batteries: Mechanisms,Properties, and Perspectives

Aqueous rechargeable zinc ion batteries (ZIBs) have been deemed to be possible candidates for large‐scale energy storage due to their ecoefficiency, substantial reserve, safety, and low cost. However, the challenges inherent in aqueous electrolytes, such as water splitting reactions, water evaporation, and liquid leakage, have greatly hindered their development in energy storage. Fortunately, polymer electrolytes would be able to overcome the abovementioned challenges. Moreover, the flexible properties of polymer electrolytes can facilitate their future application in wearable electronics. Recently, increasing attention has been attracted to the polymer electrolyte‐based zinc ion batteries. However, the development of polymer electrolytes for ZIBs is still in the early stages due to numerous challenges. Therefore, substantial research effort is required to overcome the challenges of polymer electrolyte‐based ZIBs. In this review, the current progress in developing polymer electrolytes, including solid polymer electrolytes, gel polymer electrolytes, and hybrid polymer electrolytes, as well as the interactions between electrodes and polymer electrolytes for ZIBs is comprehensively reviewed, analyzed, and discussed in terms of their synthesis, characterization, and performance validation. To facilitate further research and development of polymer electrolytes for ZIBs, the relevant challenges are summarized and analyzed, and some underlying approaches to overcome these challenges are also proposed.     

Blood clearance and biodistribution of polymer brush-afforded silica particles prepared by surface-initiated living radical polymerization

The physiological properties of polymer brush-afforded silica particles prepared by surface-initiated living radical polymerization were investigated in terms of the circulation lifetime in the blood and distribution in tissues. Hydrophilic polymers consisting mainly of poly(poly(ethylene glycol) methyl ether methacrylate) were grafted onto silica particles by surface-initiated atom transfer radical polymerization that was mediated by a copper complex to produce hairy hybrid particles. A series of hybrid particles was synthesized by varying the diameter of the silica core and the chain length of the polymer brush to examine the relationship between their physicochemical and physiological properties. The hybrid particles were injected intravenously into mice to investigate systematically their blood clearance and body distribution. It was revealed that the structural features of the hybrid particles significantly affected their in vivo pharmacokinetics. Some hybrid particles exhibited an excellently prolonged circulation lifetime in the blood with a half life of ～20 h. When such hybrid particles were injected intravenously into a tumor-bearing mouse, they preferentially accumulated in tumor tissue. The tumor-targeted delivery was optically visualized using hybrid particles grafted with fluorescence-labeled polymer brushes.     

Synthesis and self-assembly of a DNA-conjugated poly(propylene glycol) derivative

Due to several characteristic features of DNA (e.g., genetic coding transfer and nanoscaled accuracy or so), DNA based compounds have been recently highlighted in a variety of research fields, including physics, chemistry, engineering or so. To date, they have been expanded into a hybrid form conjugated with conventional polymer groups. Such synthetic hybrid conjugates can be organized into multi-dimensional nanoor micro-structures; rod, sheet, and spherical shaped nanomaterials [1]. In this study, we showed a novel block copolymer composed of DNA and poly(propylene glycol) (PPG) (designated as DNA-b-PPG) for the self-assembled construction into three-dimensional vesicular structures.     

Graphene oxide-polyethylenimine nanoconstruct as a gene delivery vector and bioimaging tool

Graphene oxide (GO) has attracted an increasing amount of interest because of its potential applications in biomedical fields such as biological imaging, molecular imaging, drug/gene delivery, and cancer therapy. Moreover, GO could be fabricated by modifying its functional groups to impart specific functional or structural attributes. This study demonstrated the development of a GO-based efficient gene delivery carrier through installation of polyethylenimine, a cationic polymer, which has been widely used as a nonviral gene delivery vector. It was revealed that a hybrid gene carrier fabricated by conjugation of low-molecular weight branched polyethylenimine (BPEI) to GO increased the effective molecular weight of BPEI and consequently improved DNA binding and condensation and transfection efficiency. Furthermore, this hybrid material facilitated sensing and bioimaging because of its tunable and intrinsic electrical and optical properties. Considering the extremely high transfection efficiency comparable to that of high-molecular weight BPEI, high cell viability, and its application as a bioimaging agent, the BPEI-GO hybrid material could be extended to siRNA delivery and photothermal therapy.     

The coiled coil motif in polymer drug delivery systems

The coiled coil is a superhelical structural protein motif that has been thoroughly investigated in recent years. Because of the relatively well-understood principles that determine the properties of coiled coil peptides and proteins, macromolecular systems containing the coiled coil motif have been suggested for various applications. This short review focuses on hybrid polymer coiled coil systems designed for drug delivery purposes. After a short introduction, the most important features of the coiled coils (stability, association number, oligomerization selectivity and orientation of helices) are described, and the factors influencing these characteristics are discussed. Several examples of the most interesting biomedical applications of the polymer-coiled coil systems (according to the authors' opinion) are presented.     

Quantification of chemical–polymer surface interactions in microfluidic cell culture devices

Microfluidic cell culture devices have been used for drug development, chemical analysis, and environmental pollutant detection. Because of the decreased fluid volume and increased surface area to volume ratio, interactions between device surfaces and the fluid is a key element that affects the performance and detection accuracy of microfluidic devices, particularly if fluid is recirculated by a peristaltic pump. However, this issue has not been studied in detail in a microfluidic cell culture environment. In this study, chemical loss and contaminant leakage from various polymer surfaces in a microfluidic setup were characterized. The effects of hydrophilic coating with Poly (vinyl alcohol), Pluronic® F‐68, and multi‐layer ionic coating were measured. We observed significant surface adsorption of estradiol, doxorubicin, and verapamil with PharMed® BPT tubing, whereas PTFE/BPT and stainless steel/BPT hybrid tubing caused less chemical loss in proportion to the fraction of BPT tubing in the hybrid system. Contaminants leaching out of the BPT tubing were found to be estrogen receptor agonists as determined by estrogen‐induced green fluorescence expression in an estrogen responsive Ishikawa cell line and also caused interference with an estradiol enzyme‐linked immunosorbent assay (ELISA) assay. Stainless steel/BPT hybrid tubing caused the least interference with ELISA. In summary, polymer surface and chemical interactions inside microfluidic systems should not be neglected and require careful investigations when results from a microfluidic system are compared with results from a macroscale cell culture setup. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Generic delivery of payload of nanoparticles intracellularly via hybrid polymer capsules for bioimaging applications

Towards the goal of development of a generic nanomaterial delivery system and delivery of the 'as prepared' nanoparticles without 'further surface modification' in a generic way, we have fabricated a hybrid polymer capsule as a delivery vehicle in which nanoparticles are loaded within their cavity. To this end, a generic approach to prepare nanomaterials-loaded polyelectrolyte multilayered (PEM) capsules has been reported, where polystyrene sulfonate (PSS)/polyallylamine hydrochloride (PAH) polymer capsules were employed as nano/microreactors to synthesize variety of nanomaterials (metal nanoparticles; lanthanide doped inorganic nanoparticles; gadolinium based nanoparticles, cadmium based nanoparticles; different shapes of nanoparticles; co-loading of two types of nanoparticles) in their hollow cavity. These nanoparticles-loaded capsules were employed to demonstrate generic delivery of payload of nanoparticles intracellularly (HeLa cells), without the need of individual nanoparticle surface modification. Validation of intracellular internalization of nanoparticles-loaded capsules by HeLa cells was ascertained by confocal laser scanning microscopy. The green emission from Tb(3+) was observed after internalization of LaF(3):Tb(3+)(5%) nanoparticles-loaded capsules by HeLa cells, which suggests that nanoparticles in hybrid capsules retain their functionality within the cells. In vitro cytotoxicity studies of these nanoparticles-loaded capsules showed less/no cytotoxicity in comparison to blank capsules or untreated cells, thus offering a way of evading direct contact of nanoparticles with cells because of the presence of biocompatible polymeric shell of capsules. The proposed hybrid delivery system can be potentially developed to avoid a series of biological barriers and deliver multiple cargoes (both simultaneous and individual delivery) without the need of individual cargo design/modification.     

T7 gene 6 exonuclease has an RNase H activity.

T7 gene 6 exonuclease has been shown to have an RNase H activity as well as a double-strand specific DNase activity by the following experiments: The RNase H activity coelutes with the DNase activity from DEAE-cellulose, phosphocellulose, hydroxyapatite, and Sephadex G-200 columns. Gene 6 exonuclease specified by a T7 strain with a temperature sensitive mutation in gene 6 has an extremely heat-labile RNase H activity as well as a heat-labile DNase activity. T7 gene 6 exonuclease degrades the RNA region of a poly(A) . poly(dT) hybrid polymer exonucleolytically from the 5' terminus, releasing a ribonucleoside 5'-monophosphate product. When the RNA strand of a 0X174 RNA . DNA hybrid molecule synthesized with E. coli RNA polymerase is degraded, a ribonucleoside triphosphate is produced from the 5'-triphosphate terminus. Participation of T7 gene 6 exonuclease in the removal of primer RNA in discontinuous replication of T7 DNA is discussed.     

Flexural and Dynamic Mechanical Properties of Alkali-Treated Coir/Pineapple Leaf Fibres Reinforced Polylactic Acid Hybrid Biocomposites

Polylactic acid(PLA)possesses good mechanical and biodegradability properties which make it a suitable material for polymer composites whereas brittleness and high costs limit its utilization in various applications.The reinforcement of natural fibres with biopolymers has been formed to be an efficient technique to develop composites having the ability to be fully biodegradable.This study concerns with the incorporation of various percentages of untreated and alkali-treated Coir Fibres(CF)and pineapple leaf fibres(PALF)in PLA biocomposites and characterizations of flexural,morphological and dynamic mechanical properties.Flexural properties showed that the treated C1P1 hybrid composites(C1P1A)displayed highest flexural strength(35.81 MPa)and modulus(5.28 GPa)among all hybrid biocomposites.Scanning Electron Micros-copy(SEM)revealed a behaviour of fibre-matrix adhesion in untreated treated biocomposites.SEM observation revealed good dispersion of the fillers in PLA.Dynamic mechanical analysis revealed that C1P1A showed highest glass transition temperature(Tg)and storage modulus(E')while untreated C3P7 displayed the least Tg and E'.Overall findings showed that alkali-treated hybrid biocomposites(CF/PALF/PLA)especially C1P1A have improved flexural properties,dynamic and morphological properties over untreated biocomposites.Success of these findings will provide attracting consideration of these hybrid biocomposites for various lightweight uses in a broad selection of industrial applications such as biomedical sectors,automobile,construction,electronics equipment,and hardware tools.     

Advances in Nano Biotic/Abiotic Hybrid Systems: Protein-Based Engineered Devices

Integrative nanobiotechnology utilizes natural ideas and materials for manufacturing nanoscale devices. As living organisms traditionally represent a good model for engineers to learn from, biological components of interest, with optimal functionality, have been used in the creation of biotic/abiotic hybrid devices. As an example, bacteriorhodopsin/F₀F₁-ATP-synthase-incorporated polymer vesicles provide a model of hybrid protein/artificial synthetic membrane system to perform biological functions. Some potential applications are the construction of intervesicular/intravesicular communications, such as excitable vesicles (EVs), for biocomputer and biomolecular motor-powered nanoelectromechanical systems (NEMS) for nanomedicine. Finally, advanced biotic/abiotic hybrid technology is expected to provide an alternative method to conventional fabrication technology to meet the increasing demands by saving enormous engineering efforts.     

Hybrid polymer/lipid vesicles: Influence of polymer architecture and molar mass on line tension

Hybrid polymer/lipid vesicles are self-assembled structures that have been the subject of an increasing number of studies in recent years. They are particularly promising tools in the development of cell membrane models because they offer the possibility to fine-tune their membrane structure by adjusting the distribution of components (presence or absence of “raft-like” lipid domains), which is of prime importance to control their membrane properties. Line tension in multiphase membranes is known to be a key parameter on membrane structuration, but remains unexplored, either experimentally or by computer modeling for hybrid polymer/lipid vesicles. In this study, we were able to measure the line tension on different budded hybrid vesicles, using a micropipette aspiration technique, and show the influence of the molar mass and the architecture of block copolymers on line tension and its consequences for membrane structuration.     

Synthesis and in vitro cancer cell targeting of folate-functionalized biodegradable amphiphilic dendrimer-like star polymers

By coupling a well-defined PLLA star polymer with six carboxylic acid-terminated polyester dendrons based on 2,2-bis(hydroxymethyl)propionic acid, a biodegradable dendrimer-like star polymer (DLSP) with multiple carboxylic acid groups at the outer surface was successfully synthesized. Conjugation of amine-functionalized folic acids (FA) onto the DLSP yielded a folate-DLSP hybrid as a carrier for targeted drug delivery. The chemical structures were proven by proton nuclear magnetic resonance and size exclusion chromatography. The DLSPs could form unimolecular micelles with a mean particle size of about 18 nm, as determined by dynamic light scattering. Flow cytometry and confocal microscope studies revealed that the cellular uptake of the folate-DLSP hybrid against KB cells (overexpressed folate-receptor) was much higher than that of the neat DLSP (without FA) due to the folate receptor-mediated binding.     

Polyester dendritic systems for drug delivery applications: in vitro and in vivo evaluation

High molecular weight polymers (> 20 000 Da) have been widely used as soluble drug carriers to improve drug targeting and therapeutic efficacy. Dendritic polymers are exceptional candidates for the preparation of near monodisperse drug carriers due to their well-defined structure, multivalency, and flexibility for tailored functionalization. We evaluated various dendritic architectures composed of a polyester dendritic scaffold based on the monomer unit 2,2-bis(hydroxymethyl)propanoic acid for their suitability as drug carriers both in vitro and in vivo. These systems are both water soluble and nontoxic. In addition, the potent anticancer drug, doxorubicin, was covalently bound via a hydrazone linkage to a high molecular weight 3-arm poly(ethylene oxide)-dendrimer hybrid. Drug release was a function of pH, and the release rate was more rapid at pH < 6. The cytotoxicity of the DOX-polymer conjugate measured on multiple cancer lines in vitro was reduced but not eliminated, indicating that some active doxorubicin was released from the drug polymer conjugate under physiological conditions. Furthermore, biodistribution experiments show little accumulation of the DOX-polymer conjugate in vital organs, and the serum half-life of doxorubicin attached to an appropriate high molecular weight polymer has been significantly increased when compared to the free drug. Thus, this new macromolecular system exhibits promising characteristics for the development of new polymeric drug carriers.     

Computational strategies for understanding the nature of interaction in dioxin imprinted nanoporous trappers

A new computational model capable of understanding the nature of interactions in signature complexes formed between the template (2,3,7,8‐tetrachlorodibenzo‐p dioxin (TCDD)) and the functional monomers (methacrylic acid (MAA)) using density functional theory (DFT) has been designed. The polymer precursors were optimized for geometries in polymerization media, computing the interaction energies between template molecules and functional monomers of transient pre‐polymerized complexes (PPC), and structural and vibrational properties reference to theoretical infrared spectra were computed using DFT of B3LYP/6 311+G(d,p) hybrid functional method. Atom in molecule theory was used to analyze the hydrogen‐bonding characteristics of PPC of MAA–TCDD. Considering the theoretical titrations conducted in a virtual solvent box, it was found that the 1:4 molar ratio was required to form the most stable PPC in a given solvent system. The electron density plots indicate strong hydrogen bonding as shown by the 2pz dominant highest occupied molecular orbital (HOMO) character that could be the preferable sites of binding for target molecule, TCDD. Considering HOMO approach, the active adsorption sites in molecularly imprinted polymer was modeled to get insight on molecular recognition property for targeted molecule, TCDD. The proposed computational protocol is simple, accurate, and novel to design the polymer and is useful to predict the properties of polymer systems than the conventional theoretical analysis of template–monomer interactions. Copyright © 2015 John Wiley & Sons, Ltd.     

Refolding hydrogels self-assembled from N-(2-hydroxypropyl)methacrylamide graft copolymers by antiparallel coiled-coil formation

A novel hybrid hydrogel system based on N-(2-hydroxypropyl)methacrylamide copolymers was proposed. It consisted of the hydrophilic polymer backbone and a pair of oppositely charged peptide grafts. Two distinct pentaheptad peptides (CCE and CCK) were anticipated to create a dimerization motif and serve as physical cross-linkers. Consequently, the graft copolymers CCE-P and CCK-P self-assembled into hybrid hydrogels in situ; the process was modulated by the formation of antiparallel heterodimeric coiled-coils. This approach possesses an advantage to decrease the steric hindrance of the polymer backbone on the "in-register" alignment of peptide grafts. Indeed, equimolar mixtures of the graft copolymers, CCE-P/CCK-P, have been observed to self-assemble into hydrogels in PBS solution at neutral pH at concentrations as low as 0.1 wt %. Circular dichroism spectroscopy, sedimentation equilibrium experiments, and microrheology revealed that the self-assembly process corresponded to the two-stranded alpha-helical coiled-coil formation between CCE and CCK. Moreover, the formation of hybrid hydrogels was reversible. Denaturation of the coiled-coil domains with guanidine hydrochloride (GdnHCl) solutions resulted in disassembly of the hydrogels. Removal of GdnHCl by dialysis caused coiled-coil refolding and hydrogel reassembly. Scanning electron microscopy results demonstrated that the concentration of the graft copolymers had a significant impact on the structure and morphology of self-assembled hydrogels.