On the mechanical properties of the rare endemic cactus Stenocereus eruca and the related species S. gummosus

We examined the hypothesis that the procumbent growth habit of the rare, columnar cactus Stenocereus eruca is in part the result of a diminution of the mechanical properties of stem tissues by comparing the properties of S. eruca plants with those of the putatively closely related semi-erect shrub S. gummosus. Intact stems and surgically removed anatomically comparable regions of the stems of both species were tested in bending and tension to determine their Young's modulus and breaking stress. A computer program was used to evaluate the contribution of each region to the capacity of entire stems to resist bending forces. Our analyses indicate that the principal stiffening agent in the stems of both species is a peripheral tissue complex (= epidermis and collenchyma in the primary plant body) that has a significantly higher tensile breaking stress and greater extensibility for S. gummosus than that of S. eruca. Computer simulations indicate that the wood of either species contributes little to bending stiffness, except in very old portions of S. gummosus stems, because of its small volume and central location in the stem. These and other observations are interpreted to support the hypothesis that S. eruca evolved a procumbent growth habit as the result of manifold developmental alterations some of which reduced the capacity of tissues to support the weight of stems.     

Bending of apricot tree branches under the weight of axillary growth: test of a mechanical model with experimental data

Stem orientation is an important factor for fruit tree growth and branching habit since it influences fruit production as well as training practices. A mechanical model of the bending of a stem under axillary load was written and evaluated using experimental data on apricot trees (Prunus armeniaca L.). A set of 15 1-year-old stems of various shapes was observed during the early stage of the growing season when radial growth is still negligible and the loading of the stem increases considerably. The structural modulus of elasticity (MOE) of the stems was estimated through in situ bending tests assuming homogeneous material behaviour. The effect of viscoelasticity was observed through creep tests performed on similar stems during winter. Inputs of the model are initial shape, initial diameter, and final load, defined at various positions along the stem. The final shape was simulated based on different mechanical assumptions, and compared to observations. Assuming small deflections resulted in an underestimate of the mean slope variation of 48%, accounting for large displacements reduced this underestimate to 29% and accounting for viscoelasticity reduced it further to 14%. An adjustment of the structural MOE to fit the final shape led to an excellent fit of the data in most cases, the residual errors for some axes being attributed to material heterogeneity. The use of biomechanical models to predict the shape of fruit trees based on growth parameters, provided adequate assumptions are made, is discussed.     

How to become a tree without wood – biomechanical analysis of the stem of Carica papaya L

Carica papaya L. does not contain wood, according to the botanical definition of wood as lignified secondary xylem. Despite its parenchymatous secondary xylem, these plants are able to grow up to 10‐m high. This is surprising, as wooden structural elements are the ubiquitous strategy for supporting height growth in plants. Proposed possible alternative principles to explain the compensation for lack of wood in C. papaya are turgor pressure of the parenchyma, lignified phloem fibres in the bark, or a combination of the two. Interestingly, lignified tissue comprises only 5–8% of the entire stem mass. Furthermore, the phloem fibres do not form a compact tube enclosing the xylem, but instead form a mesh tubular structure. To investigate the mechanism of papaya's unusually high mechanical strength, a set of mechanical measurements were undertaken on whole stems and tissue sections of secondary phloem and xylem. The structural Young's modulus of mature stems reached 2.5 GPa. Since this is low compared to woody plants, the flexural rigidity of papaya stem construction may mainly be based on a higher second moment of inertia. Additionally, stem turgor pressure was determined indirectly by immersing specimens in sucrose solutions of different osmolalities, followed by mechanical tests; turgor pressure was between 0.82 and 1.25 MPa, indicating that turgor is essential for flexural rigidity of the entire stem.     

Mature Tissue and Crop Canopy Respiratory Characteristics of Rye, Triticale and Wheat

Crop dry matter and its chemical composition, together withcanopy and mature tissue respiration rates were measure at equivalentgrowth stages and temperatures for spring and winter rye, triticaleand wheat crops grown under irrigated field conditions. Canopyrespiration was partitioned into growth and maintenance respirationusing information from the chemical composition analysis ofthe crop biomass. Rates of dry matter accumulation early inthe growing season were significantly greater for rye cropsin comparison to triticale and wheat. However, when dry matterwas measured at similar ontogenetic stages, the productivityadvantage of the rye crop was no longer evident. Nevertheless,canopy respiration rates per unit ground area were significantlylower for rye than wheat over all temperatures and growth stages.Intergeneric differences in the respiration rates of matureleaf and stem tissues were consistent with those measured atcanopy scales. Differences in the chemical composition of thebiomass among genera were minimal, and insufficient to accountfor differences in canopy respiration due to synthesis respirationrequirement. Estimates of biomass maintenance requirements appearto be significantly lower for rye than wheat when calculatedat similar temperatures and ontogenetic stages. The maintenancecoefficient (m) depended on stage of development, suggestingthat m will decline earlier chronologically for rye than wheat,which implies that greater carbon retention is another aspectcontributing to the higher early-season crop growth rates ofspring and winter rye. Considering the lower respiration ratesof mature stems relative to leaves, the dependence of m on stem:leafratio was suggested as a useful approach to modelling ontogeneticeffects on maintenance respiration.Copyright 1993, 1999 AcademicPress Rye, triticale, wheat, dry matter, growth and maintenance respiration     

Safety and streamlining of woody shoots in wind: an empirical study across 39 species in tropical Australia

? Wind is a key mechanical stress for woody plants, so how do shoot traits affect performance in wind? ? We used a vehicle mounted apparatus to measure drag, streamlining and mechanical safety in 127 vertical lead-shoots, 1.2 m long, across 39 species in tropical Australia. ? Shoot dimensions and stem tissue properties were closely coupled so that shoots with low stem specific gravity or larger projected area had thicker stems. Thicker stems provide larger second moment of area (I), which increased shoot safety and bending stiffness but impeded shoot reconfiguration in strong winds, including frontal area reduction. Nonetheless, increasing I also improved streamlining. Streamlining was unrelated to traits except I. Stem tissue material properties only had small effects. Higher modulus of rupture increased shoot safety and higher Young's modulus impeded shoot reconfiguration. ? We found no conflict between bending stiffness and streamlining for woody shoots. Stiffness might help streamlining by increasing damping and stability, thereby reducing flagging in wind. Tissue-level traits did influence shoot-level mechanical safety and behaviour, but shoot geometry was much more important. Variable shoot and stem traits, which all influenced shoot biomechanics, were integrated in shoots to yield a relatively narrow range of outcomes in wind.     

The Growth Response of the Stems of Genetically Modified Tobacco Plants (Nicotiana tabacum'Samsun') to Flexural Stimulation

Genetically modified tobacco plants (Nicotiana tabacum‘Samsun’)with antisense cinnamyl alcohol dehydrogenase DNA, produce secondaryxylem of a reduced tensile stiffness. These plants were grownalongside control plants. The stems of the plants were flexedor protected from flexing over a period of several weeks. Thetensile moduli and second moments of areas of the differenttissues inside the stems were measured and used to calculatethe bending stiffness of the plants. In tobacco, the cylinderof xylem was found to be the most important tissue in determiningthe bending stiffness of the plants. The thickness of the xylemtissue cylinder increased when plants were subjected to flexuralstimulation. This increased the bending stiffness of the stems.The response to mechanical stimulation was found to be correlatedwith tissue strain and the genetically modified plants wereable to exactly compensate for the reduced modulus of theirxylem tissue by increasing the thickness of the xylem tissuecylinder more than in control plants.Copyright 1999 Annals ofBotany Company. Tobacco plants, stem bending, xylem tissue, second moment of area, thigmomorphogenesis, mechanical strain.     

Growth patterns and evolutionary trends of Devonian crinoid columns

The general morphology of the crinoid column is briefly reviewed; growth patterns deduced from the study of stem fragments and dissociated columnals are analysed in the two commonest groups occurring in the Devonian strata of France: the Cyclici and the Pentameri. Problems concerning the introduction of new columnals beneath the calyx and the differentiation of cycles in the proximal part of heteromorphic stems are set. Evolutionary trends affecting various morphological elements include size increase, ornamentation development, cirri insertion and distribution, epifacet regression and formation of composite and secondary holdfasts. At present, these trends appear to be limited to small systematic units but proxistelisation, defined as the downward extension of proxistele characters to the other stem regions, seems to be wide-spread in the Pentameri. The difficulty in determining the evolutionary process (neoteny, progenesis…) due to the lack of information on early ontogenetic stages is emphasized.     

Effects of bending stress on taper and growth of stems of youngEucalyptus regnans trees

A glasshouse experiment investigated the effect of bending stress on stem radial and height growth and stem taper ofEucalyptus regnans seedlings. Eighteen-week-old, potted seedlings were bent continuously for 8 weeks with a static bending stress. The bending treatment was then removed and the seedlings grown for another 12 weeks. Other seedlings were stayed vertically throughout the experiment whilst control seedlings were neither bent nor stayed. Seedlings were rotated every 2 days to prevent reaction wood developing asymmetrically in the stems of bent trees. Bent trees had higher radial growth rates, developed more tapered stems and had higher safety factors (the ratio of stem radius to the minimum radius required to prevent the tree toppling over) than unbent seedlings. They produced a band of tension wood in their stems and ceased height growth whilst bent. When bending ceased, they resumed normal radial and height growth. Unbent trees developed more cylindrical stems. There were no differences in growth behaviour between stayed and control trees. Bent and unbent trees all developed a butt swell, the taper of which was not affected by treatment. It was concluded that bending stress has substantial effects on both the size and taper of tree stems. However, the development of butt swell is independent of the bending stress applied. The results were considered in relation to biomechanical theories of tree stem development.     

STRUCTURALLY PRESERVED FOSSIL PLANTS FROM ANTARCTICA. I. ANTARCTICYCAS,GEN. NOV., A TRIASSIC CYCAD STEM FROM THE BEARDMORE GLACIER AREA

Silicified stems with typical cycadalean anatomy are described from specimens collected from the Fremouw Formation (Triassic) in the Transantarctic Mountains of Antarctica. Axes are slender with a large parenchymatous pith and cortex separated by a narrow ring of vascular tissue. Mucilage canals are present in both pith and cortex. Vascular tissue consists of endarch primary xylem, a narrow band of secondary xylem tracheids, cambial zone, and region of secondary phloem. Vascular bundles contain uni- to triseriate rays with larger rays up to 2 mm wide separating the individual bundles. Pitting on primary xylem elements ranges from helical to scalariform; secondary xylem tracheids exhibit alternate circular bordered pits. Traces, often accompanied by a mucilage canal, extend out through the large rays into the cortex where some assume a girdling configuration. A zone of periderm is present at the periphery of the stem. Large and small roots are attached to the stem and are conspicuous in the surrounding matrix. The anatomy of the Antarctic cycad is compared with that of other fossil and extant cycadalean stems.     

Alpine and Arctic tundra shrub populations show similar ontogenetic growth trends but differing absolute growth rates and lifespan

The majority of terrestrial primary production is performed by plants, the ontogenetic growth trends of which significantly influence biomass and carbon dynamics. Here, we present a study of ontogenetic trends in primary (apical) and secondary (stem thickening) growth of plants in Arctic (Svalbard, Norway) and alpine (Krkonoše, Czechia) populations of the black crowberry (Empetrum nigrum), the dominant plant species of certain tundra communities. The environmental conditions in alpine areas are more favourable for plant growth than those in the High Arctic, where temperatures are lower, there is less precipitation and soils are shallower, among other differences. These differences were clearly reflected in significant distinctions in absolute growth rates and shrub age between the populations under study. However, we found almost no divergence in ontogenetic growth trends between the populations (based on ring width measurements made from the base to the top of plants, known as serial sectioning). In both populations, primary and secondary stem base growth decrease over the course of ontogeny whereas secondary stem top growth and basal area increment increase. No significant differences in the slope of the trends were found in either primary or secondary stem base growth. Trends of the growth ratio between basal area increment and primary growth revealed neither absolute nor relative differences between the populations. Ontogenetic trends in the shrubs analysed were surprisingly stable despite the prominently dissimilar environmental conditions. Empetrum plants have adapted to the different environments by altering their absolute growth rate only. This adaptation has probably also resulted in the different longevity of plants constituting the study populations, confirming the theory that slower-growing plants live longer. Primary growth and secondary stem base growth seem to be more basic characteristics of plant growth compared to basal area increment and secondary growth at the apex because the latter two seem to be dependent on the absolute growth rate.     

Growth stress controls negative gravitropism in woody plant stems

In the shoots of woody plant species, reaction-wood fibers are formed on the upper or lower side of the secondary xylem of a leaning trunk or branch wherever large, internal growth stress is generated. Negative gravitropic movement in woody plant stems is proposed to be the result of growth stress generated in the reaction-wood tissue. This study examines the interaction between bending moment due to increasing self-weight and recovery moment resulting from asymmetric growth stress, and tests a hypothesis that describes the relationship based on the structural mechanics "beam theory". Simulations of observed tree branch morphology of Magnolia kobus DC., Juniperus chinensis L., Abies saccharinensis Fr. Schum., and Prunus spachiana Kitamura f. spachiana cv. Plenarosea showed that (i) the growth stress generated in the reaction wood is sufficient to counteract the gravitropic response to increasing self-weight, and (ii) the specific directional angle of the shoot apex or preferred angle of the elongation zone plays an important role in controlling the spatial shape of the branch stem that is peculiar to plant species with large growth stress generated in the reaction-wood tissue.     

Development and Growth Form of the Neotropical Liana <Emphasis Type="Italic">Croton nuntians</Emphasis>: The Effect of Light and Mode of Attachment on the Biomechanics of the Stem

The neotropical liana Croton nuntians (Euphorbiaceae) can occur in a variety of different growth habits. Juvenile freestanding plants are mechanically stable without support and resemble morphologically young trees or shrubs, whereas adult plants are climbers. Ontogenetic variation of bending and torsion properties of different growth phases are analyzed by measurements of flexural stiffness, structural bending modulus, torsional stiffness and structural torsional modulus. Mechanical and anatomical data show two fundamentally different patterns for juvenile freestanding and adult climbing plants. In freestanding plants, mechanical properties and the contribution of cortex, wood, and pith to the stem cross-section vary only little during ontogeny as is typical for semi-self-supporting plants. In contrast, climbing plants become significantly more flexible during ontogeny, as is characteristic for lianas. This is accompanied by a transition to the formation of a less dense wood type with large diameter vessels and an increasing contribution of flexible tissues (less dense wood and cortex) to the cross-sectional area and the axial second moment of area of the stems. Depending on the environmental conditions, freestanding plants can differ considerably in their appearance due to differences in branching system or stem taper. Therefore the influence of light quantity, measured as percentage of canopy opening, on the mechanical properties and the stem anatomy was tested. Freestanding plants grown with strong shade are significantly more stiff in bending compared with plants grown with a moderate light environment.     

Pedicel development in Arabidopsis thaliana: contribution of vascular positioning and the role of the BREVIPEDICELLUS and ERECTA genes

Although the regulation of Arabidopsis floral meristem patterning and determinacy has been studied in detail, very little is known about the genetic mechanisms directing development of the pedicel, the short stem linking the flower to the inflorescence axis. Here, we provide evidence that the pedicel consists of a proximal portion derived from the young flower primordium, and a bulged distal region that emerges from tissue at the bases of sepals in the floral bud. Distal pedicel growth is controlled by the KNOTTED1-like homeobox gene BREVIPEDICELLUS (BP), as 35S::BP plants show excessive proliferation of pedicel tissue, while loss of BP conditions a radial constriction around the distal pedicel circumference. Mutant radial constrictions project proximally along abaxial and lateral sides of pedicels, leading to occasional downward bending at the distal pedicel. This effect is severely enhanced in a loss-of-function erecta (er) background, resulting in radially constricted tissue along the entire abaxial side of pedicels and downward-oriented flowers and fruit. Analysis of pedicel vascular patterns revealed biasing of vasculature towards the abaxial side, consistent with a role for BP and ER in regulating a vascular-borne growth inhibitory signal. BP expression in a reporter line marked boundaries between the inflorescence stem and lateral organs and the receptacle and floral organs. This boundary expression appears to be important to prevent homeotic displacement of node and lateral organ fates into underlying stem tissue. To investigate interactions between pedicel and flower development, we crossed bp er into various floral mutant backgrounds. Formation of laterally-oriented bends in bp lfy er pedicels paralleled phyllotaxy changes, consistent with a model where the architecture of mutant stems is controlled by both organ positioning and vasculature patterns. Collectively, our results indicate that the BP gene acts in Arabidopsis stems to confer a growth-competent state that counteracts lateral-organ associated asymmetries and effectively radializes internode and pedicel growth and differentiation patterns.     

Ontogenetic tissue modification in Malus fruit peduncles: the role of sclereids

Background and Aims

Apple (Malus) fruit peduncles are highly modified stems with limited secondary growth because fruit ripening lasts only one season. They must reliably connect rather heavy fruits to the branch and cope with increasing fruit weight, which induces dynamic stresses under oscillating wind loads. This study focuses on tissue modification of these small, exposed structures during fruit development.

Methods

A combination of microscopic, static and dynamic mechanical tests, as well as Raman spectroscopy, was used to study structure–function relationships in peduncles of one cultivar and 12 wild species, representatively chosen from all sections of the genus Malus. Tissue differentiation and ontogenetic changes in mechanical properties of Malus peduncles were observed throughout one growing season and after successive removal of tissues.

Key Results

Unlike in regular stems, the vascular cambium produces mainly phloem during secondary growth. Hence, in addition to a reduced xylem, all species developed a centrally arranged sclerenchyma ring composed of fibres and brachysclereids. Based on differences in cell-wall thickness, and proportions and arrangement of sclereids, two types of peduncle construction could be distinguished. Fibres provide an increased maximum tensile strength and contribute most to the overall axial rigidity of the peduncles. Sclereids contribute insignificantly to peduncle strength; however, despite being shown to have a lower elastic modulus than fibres, they are the most effective tissue in stiffening peduncles against bending.

Conclusions

The experimental data revealed that sclereids originating from cortical parenchyma act as ‘accessory’ cells to enhance proportions of sclerenchyma during secondary growth in peduncles. The mechanism can be interpreted as an adaptation to continuously increasing fruit loads. Under oscillating longitudinal stresses, sclereids may be regarded as regulating elements between maintenance of stiffness and viscous damping, the latter property being attributed to the cortical parenchyma.     

Leaf support biomechanics of neotropical understory herbs

Plants in light-limited tropical rainforest understories face an important carbon allocation trade-off: investment of available carbon into photosynthetic tissue should be advantageous, while risk of damage and mortality from falling debris favors investment into nonphotosynthetic structural tissue. We examined the modulus of rupture (σ(max)), Young's modulus of elasticity (E), and flexural stiffness (F) of stems and petioles in 14 monocot species from six families. These biomechanical properties were evaluated with respect to habitat, rates of leaf production, clonality, and growth form. Species with higher E and σ(max), indicating greater resistance per unit area to bending and breaking, respectively, tended to be shade-tolerant, slow growing, and nonclonal. This result is consistent with an increase in carbon allocation to structural tissue in shade-tolerant species at the expense of photosynthetic tissue and growth. Forest- edge species were weaker per unit area (had a lower E), but had higher flexural stiffness due to increases in stem and petiole diameter. While this is inefficient in requiring more carbon per unit of structural support, it may enable forest-edge species to support larger and heavier leaves. Our results emphasize the degree to which biomechanical traits vary with ecological niche and illustrate suites of characteristics associated with different carbon allocation strategies.     

Developmental plasticity and biomechanics of treelets and lianas in Manihot aff. quinquepartita (Euphorbiaceae): a branch-angle climber of French Guiana

Background and Aims

Most tropical lianas have specialized organs of attachment such as twining stems, hooks or tendrils but some do not. Many climbers also have an early self-supporting phase of growth and in some species this can produce treelet-sized individuals. This study focuses on how a liana can climb without specialized attachment organs and how biomechanical properties of the stem are modulated between self-supporting treelets and canopy-climbing lianas.

Methods

Biomechanics and stem development were investigated in self-supporting to climbing individuals of Manihot aff. quinquepartita (Euphorbiaceae) from tropical rain forest at Saül, central French Guiana. Bending tests were carried out close to the site of growth. Mechanical properties, including Young''s elastic modulus, were observed with reference to habit type and changes in stem anatomy during development.

Key Results

This liana species can show a remarkably long phase of self-supporting growth as treelets with stiff, juvenile wood characterizing the branches and main stem. During the early phase of climbing, stiff but unstable stem segments are loosely held in a vertical position to host plants via petiole bases. The stiffest stems – those having the highest values of Young''s modulus measured in bending – belonged to young, leaning and climbing stems. Only when climbing stems are securely anchored into the surrounding vegetation by a system of wide-angled branches, does the plant develop highly flexible stem properties. As in many specialized lianas, the change in stiffness is linked to the development of wood with numerous large vessels and thin-walled fibres.

Conclusions

Some angiosperms can develop highly effective climbing behaviour and specialized flexible stems without highly specialized organs of attachment. This is linked to a high degree of developmental plasticity in early stages of growth. Young individuals in either open or closed marginal forest conditions can grow as substantial treelets or as leaning/climbing plants, depending on the availability of host supports. The species of liana studied differs both in terms of development and biomechanics from many other lianas that climb via twining, tendrils or other specialized attachment organs.Key words: Biomechanics, bending, developmental plasticity, French Guiana, liana, Manihot aff. quinquepartita (Euphorbiaceae), treelet, branch angle climber, Young''s modulus     

Biomechanical analysis ofPitus dayi: Early seed plant vegetative morphology and its implications on growth habit

A biomechanical method to distinguish self-supporting and non self-supporting growth habits is applied to exceptionally preserved “twigs” ofPitus dayi Gordon. The analysis investigates whether these isolated stem segments are consistent with a self-supporting tree-like habit as suggested by the stumps, trunks and branches of the genusPitus Witham preserved more commonly in the fossil record. Because of difficulties in accurately identifying certain fossil tissues, three centrisymmetrical models were constructed to test a range of possible tissue combinations over five ontogenetic stages. The results suggest a self-supporting habit with trends in mechanical parameters during ontogeny similar to those of extant, self-supporting plants. Less explicitly constrained to the analysis of habit, the investigation also examines the structural significance of specific tissues during ontogeny as observed from contributions of individual tissues to cross-sectional area, axial second moment of area and flexural stiffness.Pitus dayl produced a physiologically “cheap” primary cauline cortex which was rapidly replaced by the development of a rhytidome. A mechanically significant, cauline hypoderm comprising thickwalled sclerenchymatous tissue is absent. This arrangement differs from other tested Palaeozoic pteridosperms interpreted as semi-self-supporting such asLyginopteris oldhamia andCalamopitys sp. in which the primary cortex is mechanically significant and secondary growth of the wood does not reach mechanically significant thresholds within the primary body.     

MECHANICAL PROPERTIES WITHIN THE GROWTH ZONE OF CORN ROOTS INVESTIGATED BY BENDING EXPERIMENTS II. DISTRIBUTIONS OF MODULUS AND COMPLIANCE IN BENDING

A bending technique was used to infer the spatial distributions of rheological properties within the growth zone of the root of corn, Zea mays. “Bending modulus” (ratio of stress to strain, calculated from engineering theory of bending) falls from 20 MPa near the root tip (3 mm from the tip) to 6 MPa at the location 6 mm from the tip and then remains uniform through the basal region of the growth zone. Where growth stops, at 11–12 mm, there is a sharp rise in bending modulus. The profile of bending moduli is not changed by root incubation temperature during the growth period prior to bending, but it is shifted to the left in roots growing more slowly than the average at either of two temperatures (19 and 29 C). The spatial distribution of “compliance” (reciprocal of bending modulus and a measure of tissue extensibility) resembles the distribution of swelling in response to osmotic perturbation. The distribution of compliance does not parallel that of growth rate. Attempts to explain the discrepancy between compliance and growth rate lead us to examine the theoretical basis for the calculations and to suggest that the dependence of compliance on rate of stretching is physiologically important.     

Organ‐specific responses of tomato growth and phenolic metabolism to nitrate limitation

Phenolic compounds are secondary metabolites involved in plant innate chemical defence against pests and diseases. Their concentration varies depending on plant tissue and also on genetic and environmental factors, e.g. availability of nutrient resources. This study examines specific effects of low (LN) and high (HN) nitrogen supply on organ (root, stem and leaf) growth and accumulation of major phenolics [chlorogenic acid (CGA); rutin; kaempferol rutinoside (KR)] in nine hydroponically grown tomato cultivars. LN limited shoot growth but did not affect root growth, and increased concentrations of each individual phenolic in all organs. The strength of the response was organ‐dependent, roots being more responsive than leaves and stems. Significant differences were observed between genotypes. Nitrogen limitation did not change the phenolic content in shoots, whereas it stimulated accumulation in roots. The results show that this trade‐off between growth and defence in a LN environment can be discussed within the framework of the growth–differentiation balance hypothesis (i.e. GDBH), but highlight the need to integrate all plant organs in future modelling approaches regarding the impact of nitrogen limitation on primary and secondary metabolism.     

Development of successive cambia and pattern of secondary growth in the stem of the Neotropical liana Rhynchosia phaseoloides (SW.) DC. (Fabaceae)

The occurrence of flattened stems in Rhynchosia phaseoloides (SW.) DC. (Fabaceae) has been known for years, but little interest has been shown toward elucidating its secondary growth. This study aims to (1) understand the pattern of secondary growth and development of vascular elements from the cambium at different stages of stem growth and (2) elucidate the type, size and distribution of cells related to these processes at different regions of the stem. Dilatation growth in main stems and branches of R. phaseoloides is achieved by successive cambia formed in two areas of the actual cortex that are opposed to each other by approximately 180°. Only the first cambial ring is functionally normal and closed-elliptical in outline, supporting the growth of the middle part of the rather flat stem. Later on, this stem becomes oval to oblong in cross-section outline by the activity of successive cambia from which cells produce further xylem, phloem and parenchyma tissues in a somewhat fan-shaped way. As shown in cross section, a flat cable-like structure of several modules results, forming wings relative to the primary central axis tissues. The secondary cambia are formed by dedifferentiation of cortical parenchyma cells, resulting in small clusters of radially arranged meristematic bands of cells. From these meristematic bands, an outward-facing crescent-shaped new band of cambium is originated. The innermost cells of this meristematic band form the parenchymatic tissue that connects the new lateral module to the proximal one. This occurs several times during the whole stem ontogeny.