DNA-induced polymerization of HIV-1 integrase analyzed with fluorescence fluctuation spectroscopy

Human immunodeficiency virus type 1 (HIV-1) integrase is essential for viral replication. Integrase inserts the viral DNA into the host DNA. We studied the association of integrase to fluorescently labeled oligonucleotides using fluorescence correlation spectroscopy. The binding of integrase to the fluorescent oligonucleotides resulted in the appearance of bright spikes during fluorescence correlation spectroscopy measurements. These spikes arise from the formation of high molecular mass protein-DNA complexes. The fluorescence of the free DNA was separated from the spikes with a statistical method. From the decrease of the concentration of free oligonucleotides, a site association constant was determined. The DNA-protein complexes were formed rapidly in a salt-dependent manner with site association constants ranging between 5 and 40 microm(-1) under different conditions. We also analyzed the kinetics of the DNA-protein complex assembly and the effect of different buffer components. The formation of the fluorescent protein-DNA complex was inhibited by guanosine quartets, and the inhibition constant was determined at 1.8 +/- 0.6 x 10(8) m(-1). Displacement of bound DNA with G-quartets allowed the determination of the dissociation rate constant and proves the reversibility of the association process.     

Modeling HIV-1 integrase complexes based on their hydrodynamic properties

We present a model structure of a candidate tetramer for HIV-1 integrase. The model was built in three steps using data from fluorescence anisotropy, structures of the individual integrase domains, cross-linking data, and other biochemical data. First, the structure of the full-length integrase monomer was modeled using the individual domain structures and the hydrodynamic properties of the full-length protein that were recently measured by fluorescence depolarization. We calculated the rotational correlation times for different arrangements of three integrase domains, revealing that only structures with close proximity among the domains satisfied the experimental data. The orientations of the domains were constrained by iterative tests against the data on cross-linking and footprinting in integrase-DNA complexes. Second, the structure of an integrase dimer was obtained by joining the model monomers in accordance with the available dimeric crystal structures of the catalytic core. The hydrodynamic properties of the dimer were in agreement with the experimental values. Third, the active sites of the two model dimers were placed in agreement with the spacing between the sites of integration on target DNA as well as the integrase-DNA cross-linking data, resulting in twofold symmetry of a tetrameric complex. The model is consistent with the experimental data indicating that the F185K substitution, which is found in the model at a tetramerization interface, selectively disrupts correct complex formation in vitro and HIV replication in vivo. Our model of the integrase tetramer bound to DNA may help to design anti-integrase inhibitors.     

Structural implications of spectroscopic characterization of a putative zinc finger peptide from HIV-1 integrase.

The N-terminal domain of human immunodeficiency virus (HIV-1) integrase (IN) contains the sequence motif His-Xaa3-His-Xaa23-Cys-Xaa2-Cys, which is strongly conserved in all retroviral and retrotransposon IN proteins. This structural motif constitutes a putative zinc finger in which a metal ion may be coordinately bound by the His and Cys residues. A recombinant peptide, IN(1-55), composed of the N-terminal 55 amino acids of HIV-1 IN was expressed in Escherichia coli and purified. Utilizing a combination of techniques including UV-visible absorption, circular dichroism, Fourier transform infrared, and fluorescence spectroscopies, we have demonstrated that metal ions (Zn2+, Co2+, and Cd2+) are bound with equimolar stoichiometry by IN(1-55). The liganded peptide assumes a highly ordered structure with increased alpha-helical content and exhibits remarkable thermal stability. UV-visible difference spectra of the peptide-Co2+ complexes directly implicate thiols in metal coordination, and Co2+ d-d transitions in the visible range indicate that Co2+ is tetrahedrally coordinated. Mutant peptides containing conservative substitutions of one of the conserved His or either of the Cys residues displayed no significant Zn(2+)-induced conformational changes as monitored by CD and fluorescence spectra. We conclude that the N terminus of HIV-1 IN contains a metal-binding domain whose structure is stabilized by tetrahedral coordination of metal by histidines 12 and 16 and cysteines 40 and 43. A preliminary structural model for this zinc finger is presented.     

Peptides derived from HIV-1 Rev inhibit HIV-1 integrase in a shiftide mechanism

The HIV-1 Integrase protein (IN) mediates the integration of the viral cDNA into the host genome. IN is an emerging target for anti-HIV drug design, and the first IN-inhibitor was recently approved by the FDA. We have developed a new approach for inhibiting IN by "shiftides": peptides derived from its cellular binding protein LEDGF/p75 that inhibit IN by shifting its oligomerization equilibrium from the active dimer to an inactive tetramer. In addition, we described two peptides derived from the HIV-1 Rev protein that interact with IN and inhibit its activity in vitro and in cells. In the current study, we show that the Rev-derived peptides also act as shiftides. Analytical gel filtration and cross-linking experiments showed that IN was dimeric when bound to the viral DNA, but tetrameric in the presence of the Rev-derived peptides. Fluorescence anisotropy studies revealed that the Rev-derived peptides inhibited the DNA binding of IN. The Rev-derived peptides inhibited IN catalytic activity in vitro in a concentration-dependent manner. Inhibition was much more significant when the peptides were added to free IN before it bound the viral DNA than when the peptides were added to a preformed IN-DNA complex. This confirms that the inhibition is due to the ability of the peptides to shift the oligomerization equilibrium of the free IN toward a tetramer that binds much weaker to the viral DNA. We conclude that protein-protein interactions of IN may serve as a general valuable source for shiftide design.     

Protein structure and oligomerization are important for the formation of export-competent HIV-1 Rev-RRE complexes

The translation of the unspliced and partially spliced viral mRNAs that encode the late, structural proteins of HIV-1 depends on the viral-protein Rev. Oligomeric binding of Rev to the Rev response element (RRE) in these mRNAs promotes their export from the nucleus and thus controls their expression. Here, we compared the effects of hydrophobic to hydrophilic mutations within the oligomerization domain of Rev using assays for oligomeric RNA binding, protein structure, and export from the nucleus. Oligomeric RNA binding alone does not correlate well with RNA transport activity in the subset of mutants. However, protein structure as judged by CD spectroscopy does correlate well with Rev function. The oligomeric assembly of Rev-L18T is impaired but exhibits minor defects in structure and retains a basal level of activity in vivo. The prevalence of L18T in infected individuals suggests a positive selection mechanism for L18T modulation of Rev activity that may delay the onset of AIDS.     

HIV-1 integrase complexes with DNA dissociate in the presence of short oligonucleotides conjugated to acridine

The human immunodeficiency virus type 1 (HIV-1) integrase is an essential enzyme in the life cycle of the virus and is therefore an attractive target for the development of new antiviral drugs. Among them, inhibitors which are capable of targeting the preassembled integrase/DNA complex are of particular interest, because they could suppress integrase activity in the context of the HIV-1 preintegration complex. Here, we study the mechanism of action of 11-mer oligonucleotides, which are efficient inhibitors of the catalytic activity of integrase, provided that they are conjugated to a hydrophobic compound, acridine. To understand the mechanism of the conjugate inhibitory action, we used a steady-state fluorescence anisotropy assay, which allowed us to study the stability of the integrase/DNA complex in various conditions. We found that oligonucleotide-acridine conjugates induced the efficient dissociation of preassembled integrase/DNA complexes. The simultaneous presence of both acridine and an oligonucleotidic moiety is required for the inhibitory activity of conjugates. However, the dissociation effect is not dependent on the oligonucleotide sequence. Finally, our results suggest that the conjugates bind directly to integrase within its complex with DNA at a site different from the viral DNA binding site.     

HIV-1 integrase pharmacophore model derived from diverse classes of inhibitors

A three-dimensional pharmacophore model has been generated for HIV-1 integrase (HIV-1 IN) from known inhibitors. A dataset consisting of 26 inhibitors was selected on the basis of the information content of the structures and activity data as required by the catalyst/HypoGen program. Our model was able to predict the activity of other known HIV-1 IN inhibitors not included in the model generation, and can be further used to identify structurally diverse compounds with desired biological activity by virtual screening.     

In vitro initial attachment of HIV-1 integrase to viral ends: control of the DNA specific interaction by the oligomerization state

HIV-1 integrase (IN) oligomerization and DNA recognition are crucial steps for the subsequent events of the integration reaction. Recent advances described the involvement of stable intermediary complexes including dimers and tetramers in the in vitro integration processes, but the initial attachment events and IN positioning on viral ends are not clearly understood. In order to determine the role of the different IN oligomeric complexes in these early steps, we performed in vitro functional analysis comparing IN preparations having different oligomerization properties. We demonstrate that in vitro IN concerted integration activity on a long DNA substrate containing both specific viral and nonspecific DNA sequences is highly dependent on binding of preformed dimers to viral ends. In addition, we show that IN monomers bound to nonspecific DNA can also fold into functionally different oligomeric complexes displaying nonspecific double-strand DNA break activity in contrast to the well known single strand cut catalyzed by associated IN. Our results imply that the efficient formation of the active integration complex highly requires the early correct positioning of monomeric integrase or the direct binding of preformed dimers on the viral ends. Taken together the data indicates that IN oligomerization controls both the enzyme specificity and activity.     

Stereospecificity of reactions catalyzed by HIV-1 integrase

The retroviral integrase catalyzes two successive chemical reactions essential for integration of the retroviral genome into a host chromosome: 3' end processing, in which a dinucleotide is cleaved from each 3' end of the viral DNA; and the integration reaction itself, in which the resulting recessed 3' ends of the viral DNA are joined to the host DNA. We have examined the stereospecificity of human immunodeficiency virus type 1 integrase for phosphorothioate substrates in these reactions and in a third reaction, disintegration, which is macroscopically the reverse of integration. Integrase preferentially catalyzed end processing and integration of a substrate with the (R(p))-phosphorothioate stereoisomer at the reaction center and disintegration of a substrate with an (S(p))-phosphorothiate at the reaction center. These results suggest a model for the architecture of the active site of integrase, and its interactions with key features of the viral and target DNA.     

Substituted 2-pyrrolinone inhibitors of HIV-1 integrase

The beta-diketoacid class of HIV-1 integrase (IN) inhibitors represent the first potent class of compounds specific for the strand transfer catalytic activity of the viral enzyme. Previously, utilizing a beta-diketoacid pharmacophore as a search query, we identified a substituted 2-pyrrolinone with modest IN inhibitory activity from a database of small-molecules [Dayam, R.; Sanchez, T.; Neamati, N. J. Med. Chem.2005, 48, 8009]. In efforts to optimize this class of IN inhibitors, we carried out a structure-activity relationship analysis around the 2-pyrrolinone core. Here, we present a new class of 2-pyrrolinone IN inhibitors.     

Binding aspects of baicalein to HIV-1 integrase

Human immunodeficiency virus type 1 (HIV-1) integrase is an essential enzyme in the life cycle of the virus. It is responsible for catalyzing the insertion of the viral genome into the host cell chromosome. This integrase is an attractive target for the design of a HIV antiviral drug, because integrase has no human counterpart. In order to know the interaction mode of HIV-1 integrase with its inhibitor, we investigated the effect of the inhibitor, baicalein, on the conformation of the HIV-1 integrase catalytic domain [IN-(50-212/F185K)] using fluorescence and circular dichroism (CD) spectroscopy. We found that baicalein binds to the hydrophobic region of the HIV-1 integrase catalytic core domain. This binding of baicalein induces the conformational change of the enzyme. We also found that the binding ratio of baicalein to the HIV-1 integrase catalytic domain is 2:1.     

Characterization of the nuclear import pathway for HIV-1 integrase

The karyophilic properties of the human immunodeficiency virus, type I (HIV-1) pre-integration complex (PIC) allow the virus to infect non-dividing cells. To better understand the mechanisms responsible for nuclear translocation of the PIC, we investigated nuclear import of HIV-1 integrase (IN), a PIC-associated viral enzyme involved in the integration of the viral genome in the host cell DNA. Accumulation of HIV-1 IN into nuclei of digitonin-permeabilized cells does not result from passive diffusion but rather from an active transport that occurs through the nuclear pore complexes. HIV-1 IN is imported by a saturable mechanism, implying that a limiting cellular factor is responsible for this process. Although IN has been previously proposed to contain classical basic nuclear localization signals, we found that nuclear accumulation of IN does not involve karyopherins alpha, beta1, and beta2-mediated pathways. Neither the non-hydrolyzable GTP analog, guanosine 5'-O-(thiotriphosphate), nor the GTP hydrolysis-deficient Ran mutant, RanQ69L, significantly affects nuclear import of IN, which depends instead on ATP hydrolysis. Therefore these results support the idea that IN import is not mediated by members of the karyopherin beta family. More generally, in vitro nuclear import of IN does not require addition of cytosolic factors, suggesting that cellular factor(s) involved in this active but atypical pathway process probably remain associated with the nuclear compartment or the nuclear pore complexes from permeabilized cells.     

Small-angle X-ray scattering studies of the structure of nucleosome core histone complexes in solution

The nucleosome core histone complex in solution at 2 M NaCl and pH 7 has a radius of gyration R_s, of 3.48 nm and a maximum dimension, L, of 12 nm. Its shape is disc-like with a mean thickness of 3 nm. The radius of gyration determined by us is of the same value as the radius of gyration of the complex in intact core particles (Braddock) et al., Biopolymers 1981, 20, 327). Thus, we conclude that the basic histone tails of the protein complex project about 2 nm from its central part.     

Hybrid quantum mechanical/molecular mechanical molecular dynamics simulations of HIV-1 integrase/inhibitor complexes

Human immunodeficiency virus (HIV)-1 integrase (IN) is an attractive target for development of acquired immunodeficiency syndrome chemotherapy. In this study, conventional and coupled quantum mechanical and molecular mechanical (QM/MM) molecular dynamics (MD) simulations of HIV-1 IN complexed with 5CITEP (IN-5CITEP) were carried out. In addition to differences in the bound position of 5CITEP, significant differences at the two levels of theory were observed in the metal coordination geometry and the areas involving residues 116-119 and 140-166. In the conventional MD simulation, the coordination of Mg(2+) was found to be a near-perfect octahedral geometry whereas a distorted octahedral complex was observed in QM/MM. All of the above reasons lead to a different pattern of protein-ligand salt link formation that was not observed in the classical MD simulation. Furthermore to provide a theoretical understanding of inhibition mechanisms of 5CITEP and its derivative (DKA), hybrid QM/MM MD simulations of the two complexes (IN-5CITEP and IN-DKA) have been performed. The results reveal that areas involving residues 60-68, 116-119, and 140-149 were substantially different among the two systems. The two systems show similar pattern of metal coordination geometry, i.e., a distorted octahedron. In IN-DKA, both OD1 and OD2 of Asp-64 coordinate the Mg(2+) in a monodentate fashion whereas only OD1 is chelated to the metal as observed in IN-5CITEP. The high potency of DKA as compared to 5CITEP is supported by a strong salt link formed between its carboxylate moiety and the ammonium group of Lys-159. Detailed comparisons between HIV-1 IN complexed with DKA and with 5CITEP provide information about ligand structure effects on protein-ligand interactions in particular with the Lys-159. This is useful for the design of new selective HIV-1 IN inhibitors.     

Degradation of HIV-1 integrase by the N-end rule pathway

Human immunodeficiency virus type-1 (HIV-1) integrase catalyzes the irreversible insertion of the viral genome into host chromosomal DNA. We have developed a mammalian expression system for the synthesis of authentic HIV-1 integrase in the absence of other viral proteins. Integrase, which bears a N-terminal phenylalanine, was found to be a short-lived protein in human embryo kidney 293T cells. The degradation of integrase could be suppressed by proteasome inhibitors. N-terminal phenylalanine is recognized as a degradation signal by a ubiquitin-proteasome proteolytic system known as the N-end rule pathway. The replacement of N-terminal phenylalanine with methionine, valine, or glycine, which are stabilizing residues in the N-end rule, resulted in metabolically stabilized integrase proteins (half-life of N-terminal Met-integrase was at least 3 h). Conversely, the substitution of N-terminal phenylalanine with other destabilizing residues retained the metabolic instability of integrase. These findings indicate that the HIV-1 integrase is a physiological substrate of the N-end rule. We discuss a possible functional similarity to the better understood turnover of the bacteriophage Mu transposase and functions of integrase instability to the maintenance and integrity of the host cell genome.