Isolation and characterization of a mixotrophic sulfur-oxidizing Thermus scotoductus

Thermophilic, faculatatively mixotrophic sulfur-oxidizing bacteria were isolated from a sulfide-rich, neutral hot spring in Iceland. The strain, IT-7254, used thiosulfate and elemental sulfur as electron donors, oxygen and nitrate as electron acceptors, and acetate and other organic compounds as carbon sources. After a few days of growth in the presence of thiosulfate, this strain formed sulfur globules. Comparison of intracellular enzymes and heme proteins of heterotrophically and mixotrophically grown cells showed some differences. The new isolate belonged to Thermus scotoductus because the small subunit (SSU) rRNA gene sequence analysis showed 98.6% sequence similarity and 84% DNA:DNA reassociation to Thermus scotoductus NMX2 A. 1. It is also close to Thermus antranikianii HN3-7, with 98.3% and 79% SSU rRNA sequence similarity and DNA:DNA reassociation, respectively. It was also found that both Thermus NMX2 A.1 and T. antranikianii HN3-7 were able to oxidize thiosulfate but that the T. scotoductus type strain SE-1 was not. This is the first report of Thermus strains that are capable of mixotrophic growth with sulfur oxidation.     

Nucleotide sequence of the gene for aqualysin I (a thermophilic alkaline serine protease) of Thermus aquaticus YT-1 and characteristics of the deduced primary structure of the enzyme

Aqualysin I is an alkaline serine protease which is secreted into the culture medium by Thermus aquaticus YT-1, an extreme thermophile [Matsuzawa, H., Hamaoki, M. & Ohta, T. (1983) Agric. Biol. Chem. 47, 25-28]. The gene encoding aqualysin I was cloned into Escherichia coli using synthetic oligodeoxyribonucleotides as hybridization probes. The nucleotide sequence of the cloned DNA was determined. The primary structure of aqualysin I, deduced from the nucleotide sequence, agreed with the NH2-terminal sequence previously reported and the determined amino acid sequences, including the COOH-terminal sequence, of the tryptic peptides derived from aqualysin I. Aqualysin I comprised 281 amino acid residues and its molecular mass was determined to be 28,350. On alignment of the whole amino acid sequence, aqualysin I showed high sequence homology with the subtilisin-type serine proteases, and 43% identity with proteinase K, 37-39% with subtilisins and 34% with thermitase. Extremely high sequence identity was observed in the regions containing the active-site residues, corresponding to Asp32, His64 and Ser221 of subtilisin BPN'. The nucleotide sequence of the cloned DNA (1105 nucleotides) revealed that it contains the entire gene encoding aqualysin I and one open reading frame without a translational stop codon. Therefore, aqualysin I was considered to be produced as a large precursor, which contains a NH2-terminal portion, the protease and a COOH-terminal portion. The G + C content of the coding region for aqualysin I was 64.6%, which is lower than those of other Thermus genes (68-74%). The codon usage in the aqualysin I gene was rather random in comparison with that in other Thermus genes.     

Xylose (glucose) isomerase gene from the thermophile Thermus thermophilus: cloning, sequencing, and comparison with other thermostable xylose isomerases.

The xylose isomerase gene from the thermophile Thermus thermophilus was cloned by using a fragment of the Streptomyces griseofuscus gene as a probe. The complete nucleotide sequence of the gene was determined. T. thermophilus is the most thermophilic organism from which a xylose isomerase gene has been cloned and characterized. The gene codes for a polypeptide of 387 amino acids with a molecular weight of 44,000. The Thermus xylose isomerase is considerably more thermostable than other described xylose isomerases. Production of the enzyme in Escherichia coli, by using the tac promoter, increases the xylose isomerase yield 45-fold compared with production in T. thermophilus. Moreover, the enzyme from E. coli can be purified 20-fold by simply heating the cell extract at 85 degrees C for 10 min. The characteristics of the enzyme made in E. coli are the same as those of enzyme made in T. thermophilus. Comparison of the Thermus xylose isomerase amino acid sequence with xylose isomerase sequences from other organisms showed that amino acids involved in substrate binding and isomerization are well conserved. Analysis of amino acid substitutions that distinguish the Thermus xylose isomerase from other thermostable xylose isomerases suggests that the further increase in thermostability in T. thermophilus is due to substitution of amino acids which react during irreversible inactivation and results also from increased hydrophobicity.     

Characterization of the Thermus thermophilus locus encoding peptide deformylase and methionyl-tRNA(fMet) formyltransferase.

An Escherichia coli strain with thermosensitive expression of the gene encoding peptide deformylase (fms) has been constructed. At nonpermissive temperatures, this strain fails to grow. The essential character of the fms gene was further used to clone by heterologous complementation the locus corresponding to Thermus thermophilus peptide deformylase. The cloned fragment also carries the methionyl-tRNA(fMet) formyltransferase gene (fmt). It is located immediately downstream from the fms gene, as in E. coli. Further sequence analysis of the region surrounding the E. coli fms-fmt locus indicates that the genes bordering the fms-fmt region are not conserved in T. thermophilus.     

Molecular cloning and nucleotide sequence of 3-isopropylmalate dehydrogenase gene (leuB) from an extreme thermophile, Thermus aquaticus YT-1

A gene (leuB) coding for 3-isopropylmalate dehydrogenase [EC 1.1.1.85] from an extreme thermophile, Thermus aquaticus YT-1 was cloned in Escherichia coli and the nucleotide sequence was determined. It contains an open reading frame of 1,035 bp encoding 344 amino acid residues. The homology with that from T. thermophilus HB8 is 87.0% in nucleotide and 91.3% in amino acid sequences. No overlapped gene was found in the present leuB gene, in contrast to the previous prediction that Thermus leuD gene is overlapped with leuB [Croft et al. (1987) Mol. Gen. Genet. 210, 490-497]. Substitutions in the primary structure which are unique for the thermophile sequences are discussed in relation to the unusual stability of the thermophile dehydrogenase based on amino acid sequence comparison of 9 microorganisms including thermophiles and mesophiles.     

Cloning and nucleotide sequence of the pullulanase gene of Thermus thermophilus HB8 and production of the enzyme in Escherichia coli.

A 3.4-kb SphI fragment carrying the pullulanase gene of Thermus thermophilus HB8 was cloned. Based on the nucleotide sequence of it and the flanking region analyzed by direct sequencing of the inverse PCR product, an expression vector was constructed. The E. coli cells harboring the plasmid produced an about 80-kDa protein having pullulanase activity, the optimum temperature of which was 70 degrees C.     

Nucleotide sequence of the malate dehydrogenase gene of Thermus flavus and its mutation directing an increase in enzyme activity

The nucleotide sequence of the malate dehydrogenase (mdh) gene from a thermophilic bacterium, Thermus flavus, was determined. The amino acid sequence of the Thermus malate dehydrogenase resembled that of the porcine heart cytoplasmic enzyme to a certain extent, and Asp-159 and His-187 were identified as possible essential residues for the catalytic function. The mutated mdh gene was also cloned from a spontaneous mutant of T. flavus containing a higher activity of the enzyme. Its mutation point was determined to be a single nucleotide exchange from C to T which caused Thr-190 to be substituted by isoleucine. The mutated enzyme showed resistance to substrate inhibition, an increase in both kcat and Km, and a shift toward a more acid optimum pH for the enzyme reaction.     

Cloning and Nucleotide Sequence of the Pullulanase Gene of Thermus thermophilus HB8 and Production of the Enzyme in Escherichia coli

A 3.4-kb SphI fragment carrying the pullulanase gene of Thermus thermophilus HB8 was cloned. Based on the nucleotide sequence of it and the flanking region analyzed by direct sequencing of the inverse PCR product, an expression vector was constructed. The E. coli cells harboring the plasmid produced an about 80-kDa protein having pullulanase activity, the optimum temperature of which was 70°C.     

The proline biosynthesis gene proA from the thermophilic bacterium Thermus ruber: its cloning, sequencing and heterologous expression]

The proA proline biosynthesis gene of thermophilic bacterium Thermus ruber was cloned and sequenced, and several properties of the encoded enzyme, gamma-glutamylphosphate reductase (GPR) were studied. The proA open reading frame (ORF) was of 1286 bp. Nucleotide sequence analysis revealed the ATG initiation codon in position 36 and the TTA termination codon in position 1304. A deduced protein product of the gene was shown to be of 44,919 Da in molecular weight. The GC content was 66%, as is characteristic of various bacteria of the genus Thermus. An amino acid sequence encoded by the cloned gene showed the highest homology (up to 64%) with GPR of T. thermophilus. The maximum activity of GPR (8.2 x 10(-2) units/ml) was observed at 55 degrees C. A weak enzymatic activity was also detected at 70 degrees C. The enzyme can be used in biotechnological studies.     

Spontaneous tandem sequence duplications reverse the thermal stability of carboxyl-terminal modified 3-isopropylmalate dehydrogenase.

A mutant strain of Thermus thermophilus which contains deletions in the 3'-terminal region of its leuB gene showed a temperature-sensitive growth phenotype in the absence of leucine. Three phenotypically thermostable mutants were isolated from the temperature-sensitive strain by spontaneous evolution. Each pseudorevertant carried a tandem sequence duplication in the 3' region of its leuB gene. The mutated 3-isopropylmalate dehydrogenases encoded by the leuB genes from the pseudorevertants were more thermostable than the enzyme from the temperature-sensitive strain. Structural analyses suggested that the decreased thermostability of the enzyme from the temperature-sensitive strain was caused by reducing hydrophobic and electrostatic interactions in the carboxyl-terminal region and that the recovered stability of the enzymes from the pseudorevertants was due to the restoration of the hydrophobic interaction. Our results indicate that tandem sequence duplications are the general genetic way to alter protein characteristics in evolution.     

Dissimilatory reduction of Fe(III) and other electron acceptors by a Thermus isolate

A thermophilic bacterium that can use O2, NO3-, Fe(III), and S0 as terminal electron acceptors for growth was isolated from groundwater sampled at a 3.2-km depth in a South African gold mine. This organism, designated SA-01, clustered most closely with members of the genus Thermus, as determined by 16S rRNA gene (rDNA) sequence analysis. The 16S rDNA sequence of SA-01 was >98% similar to that of Thermus strain NMX2 A.1, which was previously isolated by other investigators from a thermal spring in New Mexico. Strain NMX2 A.1 was also able to reduce Fe(III) and other electron acceptors. Neither SA-01 nor NMX2 A.1 grew fermentatively, i.e., addition of an external electron acceptor was required for anaerobic growth. Thermus strain SA-01 reduced soluble Fe(III) complexed with citrate or nitrilotriacetic acid (NTA); however, it could reduce only relatively small quantities (0.5 mM) of hydrous ferric oxide except when the humic acid analog 2,6-anthraquinone disulfonate was added as an electron shuttle, in which case 10 mM Fe(III) was reduced. Fe(III)-NTA was reduced quantitatively to Fe(II); reduction of Fe(III)-NTA was coupled to the oxidation of lactate and supported growth through three consecutive transfers. Suspensions of Thermus strain SA-01 cells also reduced Mn(IV), Co(III)-EDTA, Cr(VI), and U(VI). Mn(IV)-oxide was reduced in the presence of either lactate or H2. Both strains were also able to mineralize NTA to CO2 and to couple its oxidation to Fe(III) reduction and growth. The optimum temperature for growth and Fe(III) reduction by Thermus strains SA-01 and NMX2 A.1 is approximately 65 degrees C; their optimum pH is 6.5 to 7.0. This is the first report of a Thermus sp. being able to couple the oxidation of organic compounds to the reduction of Fe, Mn, or S.     

Cytochrome oxidase genes from Thermus thermophilus. Nucleotide sequence and analysis of the deduced primary structure of subunit IIc of cytochrome caa3.

Cytochrome caa3, a cytochrome c oxidase from Thermus thermophilus, is a two-subunit enzyme containing the four canonical metal centers of cytochrome c oxidases (cytochromes a and a3; copper centers CuA and CuB) and an additional cytochrome c. The smaller subunit contains heme C and was termed the C-protein. We have cloned the genes encoding the subunits of the oxidase and determined the nucleotide sequence of the C-protein gene. The gene and deduced primary amino acid sequences establish that both the gene and the protein are fusions with a typical subunit II sequence and a characteristic cytochrome c sequence; we now call this subunit IIc. The protein thus appears to represent a covalent joining of substrate (cytochrome c) to its enzyme (cytochrome c oxidase). In common with other subunits II, subunit IIc contains two hydrophobic segments of amino acids near the amino terminus that probably form transmembrane helices. Variability analysis of the Thermus and other subunit II sequences suggests that the two putative transmembrane helices in subunit II may be located on the surface of the hydrophobic portion of the intact cytochrome oxidase protein complex. Also in common with other subunits II is a relatively hydrophilic intermembrane domain containing a set of conserved amino acids (2 cysteines and 2 histidines) which have previously been proposed by others to serve as ligands to the CuA center. We compared the subunit IIc sequence with that of related proteins. N2O reductase of Pseudomonas stutzeri, a multi-copper protein that appears to contain a CuA site (Scott, R.A., Zumft, W.G., Coyle, C.L., and Dooley, D.M. (1989) Proc. Natl. Acad. Sci. U.S.A. 86, 4082-4086), contains a 59-residue sequence element that is homologous to the "CuA sequence motif" found in cytochrome oxidase subunits II, including all four putative copper ligands. By contrast, subunit II of the Escherichia coli quinol oxidase, cytochrome bo, also contains a region homologous to the CuA motif, but it lacks the proposed metal binding histidine and cysteine residues; this is consistent with the apparent absence of CuA from cytochrome bo.     

Phosphoenolpyruvate carboxylase of Thermus sp.: role of a divergent glycine-rich region

In the phosphoenolpyruvate carboxylases (PEPCs) of mesophiles, a glycine(Gly)-rich region is well conserved and involved in catalytic activity, whereas the sequence of the corresponding region is considerably divergent in PEPC of Thermus sp. In this study, the Gly-rich region of Thermus PEPC was converted to that of Escherichia coli PEPC. The resulting mutant enzyme was as heat stable as the wild-type. However, its optimum temperature was markedly decreased. Thus, the divergent Gly-rich region of Thermus PEPC contributes to its catalytic activity but not to stability at high temperature.     

Iron superoxide dismutase. Nucleotide sequence of the gene from Escherichia coli K12 and correlations with crystal structures

The nucleotide sequence of the iron superoxide dismutase gene from Escherichia coli K12 has been determined. Analysis of the DNA sequence and mapping of the mRNA start reveal a unique promoter and a putative rho-independent terminator, and suggest that the Fe dismutase gene constitutes a monocistronic operon. The gene encodes a polypeptide product consisting of 192 amino acid residues with a calculated Mr of 21,111. The published N-terminal amino acid sequence of E. coli B Fe dismutase (Steinman, H. M., and Hill, R. L. (1973) Proc. Natl. Acad. Sci. U.S.A. 70, 3725-3729), along with the sequences of seven other peptides reported here, was located in the primary structure deduced from the K12 E. coli gene sequence. A new molecular model for iron dismutase from E. coli, based on the DNA sequence and x-ray data for the E. coli B enzyme at 3.1 A resolution, allows detailed comparison of the structure of the iron enzyme with manganese superoxide dismutase from Thermus thermophilus HB8. The structural similarities are more extensive than indicated by earlier studies and are particularly striking in the vicinity of the metal-ligand cluster, which is surrounded by conserved aromatic residues. The combined structural and sequence information now available for a series of Mn and Fe superoxide dismutases identifies variable regions in these otherwise very similar molecules; the principal variable site occurs in a surface region between the two long helices which dominate the N-terminal domain.     

Comparative analysis of ribosomal protein L5 sequences from bacteria of the genus Thermus.

The genes for the ribosomal 5S rRNA binding protein L5 have been cloned from three extremely thermophilic eubacteria, Thermus flavus, Thermus thermophilus HB8 and Thermus aquaticus (Jahn et al, submitted). Genes for protein L5 from the three Thermus strains display 95% G/C in third positions of codons. Amino acid sequences deduced from the DNA sequence were shown to be identical for T flavus and T thermophilus, although the corresponding DNA sequences differed by two T to C transitions in the T thermophilus gene. Protein L5 sequences from T flavus and T thermophilus are 95% homologous to L5 from T aquaticus and 56.5% homologous to the corresponding E coli sequence. The lowest degrees of homology were found between the T flavus/T thermophilus L5 proteins and those of yeast L16 (27.5%), Halobacterium marismortui (34.0%) and Methanococcus vannielii (36.6%). From sequence comparison it becomes clear that thermostability of Thermus L5 proteins is achieved by an increase in hydrophobic interactions and/or by restriction of steric flexibility due to the introduction of amino acids with branched aliphatic side chains such as leucine. Alignment of the nine protein sequences equivalent to Thermus L5 proteins led to identification of a conserved internal segment, rich in acidic amino acids, which shows homology to subsequences of E coli L18 and L25. The occurrence of conserved sequence elements in 5S rRNA binding proteins and ribosomal proteins in general is discussed in terms of evolution and function.     

On the characterization of the putative S20-thx operon of Thermus thermophilus.

A putative operon of the ribosomal proteins S20 and Thx has been determined in a 1.4 kb sequenced region of T. thermophilus genomic DNA. Both genes have a promoter sequence 29 nt upstream of ORF1, possess their own Shine-Dalgarno motifs (GGAG) and are separated by only 9 nucleotides, a feature characteristic of the compact Thermus thermophilus genome. This is a novel arrangement, since Thx is unique to the Thermus bacteria and in all other prokaryotes the S20 gene is monocistronic. Our results, in conjunction with the recent finding that Thx is located on the top of the head of the 30S subunit in a cavity between multiple RNA elements stabilizing them with its positive charge, corroborate the observation that thermophilic ribosomes require constituents with special features for their stabilization at high temperatures.