Repetitive DNA sequences in Mycoplasma pneumoniae.

Two types of different repetitive DNA sequences called RepMP1 and RepMP2 were identified in the genome of Mycoplasma pneumoniae. The number of these repeated elements, their nucleotide sequence and their localization on a physical map of the M. pneumoniae genome were determined. The results show that RepMP1 appears at least 10 times and RepMP2 at least 8 times in the genome. The repeated elements are dispersed on the chromosome and, in three cases, linked to each other by a homologous DNA sequence of 400 bp. The elements themselves are 300 bp (for RepMP1) and 150 bp (for RepMP2) long showing a high degree of homology. One copy of RepMP2 is a translated part of the gene for the major cytadhesin protein P1 which is responsible for the adsorption of M. pneumoniae to its host cell.     

Physical analysis and mapping of the Mycoplasma pneumoniae chromosome.

Field inversion gel electrophoresis was used for analysis of the chromosome of Mycoplasma pneumoniae. The restriction endonuclease SfiI (5'-GGCCNNNNNGGCC-3') generated 2 M. pneumoniae DNA fragments of approximately 437 and 357.5 kilobase pairs (kbp), whereas 13 restriction fragments ranging in size from 2.4 to 252.0 kbp resulted from digestion with ApaI (5'-GGGCCC-3'). Totaling the sizes of the individual restriction fragments from digestion with SfiI or ApaI yielded a genome size of 794.5 or 775.4 kbp, respectively. A physical map of the M. pneumoniae chromosome was constructed by using a combination of techniques that included analysis by sequential or partial restriction endonuclease digestions and use as hybridization probes of cloned M. pneumoniae DNA containing ApaI sites and hence overlapping adjacent ApaI fragments. Genetic loci for deoC, rrn, hmw3, and the P1 gene were identified by using cloned DNA to probe ApaI restriction fragment profiles.     

Sequence divergence in the ORF6 gene of Mycoplasma pneumonia.

The ORF6 gene product of Mycoplasma pneumoniae is involved in a yet-unknown manner in the adhesion of the bacterium to its host cell. Part of the ORF6 gene is a repetitive DNA sequence (RepMP5), about 1,900 bp long. Seven additional similar copies of RepMP5 are dispersed on the genome. In the independently isolated strains M. pneumoniae M129 and FH, the RepMP5 copies residing in the ORF6 gene are not identical. Two conserved regions, ranging from nucleotides 1 to 799 and from nucleotide 1795 to the end of the gene, border a variable region, ranging from nucleotides 800 to 1794. This variable region differs in DNA sequence and by 201 bp. Analysis of RepMP5 copies outside the ORF6 gene showed that both M. pneumoniae M129 and M. pneumoniae FH carry a RepMP5 copy on a 6-kbp EcoRI fragment which has the same DNA sequence as the variable region of RepMP5 in the M. pneumoniae FH ORF6 gene. According to these data, a switch from the M. pneumoniae M129 ORF6 gene to the M. pneumoniae FH ORF6 gene could take place by gene conversion.     

Mycoplasma pneumoniae Large DNA Repetitive Elements RepMP1 Show Type Specific Organization among Strains

Mycoplasma pneumoniae is the smallest self-replicating bacterium with a streamlined genome of 0.81 Mb. Complete genome analysis revealed the presence of multiple copies of four large repetitive elements (designated RepMP1, RepMP2/3, RepMP4 and RepMP5) that are implicated in creating sequence variations among individual strains. Recently, we described RepMP1-associated sequence variations between reference strain M129 and clinical isolate S1 that involved three RepMP1-genes (i.e. mpn130, mpn137 and mpn138). Using PCR and sequencing we analyze 28 additional M. pneumoniae strains and demonstrate the existence of S1-like sequence variants in nine strains and M129-like variants in the remaining nineteen strains. We propose a series of recombination steps that facilitates transition from M129- to S1-like sequence variants. Next we examined the remaining RepMP1-genes and observed no other rearrangements related to the repeat element. The only other detected difference was varying numbers of the 21-nucleotide tandem repeats within mpn127, mpn137, mpn501 and mpn524. Furthermore, typing of strains through analysis of large RepMPs localized within the adhesin P1 operon revealed that sequence divergence involving RepMP1-genes mpn130, mpn137 and mpn138 is strictly type-specific. Once more our analysis confirmed existence of two highly conserved groups of M. pneumoniae strains.     

Physical mapping of the Mycoplasma pneumoniae genome.

In order to study the genome organization of Mycoplasma pneumoniae a cosmid library of M. pneumoniae DNA was established using a newly designed cosmid vector (pcosRW2). From this library 32 overlapping clones were isolated covering a contiguous 720 kbp DNA segment representing about 90% of the genome assuming a genome size of about 800 kbp.     

Detailed physical map and set of overlapping clones covering the genome of the archaebacterium Haloferax volcanii DS2.

An integrated approach of "bottom up" and "top down" mapping has produced a minimal set of overlapping cosmid clones covering 96% of the 4140 kilobase-pairs (kbp) Haloferax volcanii DS2 genome and a completely closed physical map. This genome is partitioned into five replicons: a 2920 kbp chromosome and four plasmids, of 690 kbp (pHV4), 442 kbp (pHV3), 86 kbp(pHV1) and 6.4 kbp (pHV2). A restriction map for six infrequently-cutting restriction enzymes was constructed, representing a total of 903 sites in the cloned DNA. We have placed the two ribosomal RNA operons, the genes for 7 S RNA and for RNaseP RNA and 22 protein-coding genes on the map. Restriction site frequencies show significant variation in different portions of the genome. The regions of high site density correspond to halobacterial satellite or FII DNA which includes two small regions of the chromosome, the plasmids pHV1 and pHV2, and half of pHV4, but not pHV3.     

Construction of an EcoRI restriction map of Mycoplasma pneumoniae and localization of selected genes.

A restriction map of the genome of Mycoplasma pneumoniae, a small human pathogenic bacterium, was constructed by means of an ordered cosmid library which spans the complete bacterial chromosome. The positions of 143 endonuclease EcoRI restriction fragments were determined and aligned with the physical map. In addition, restriction sites for the rare-cutting enzymes XhoI (25 sites), ApaI (13 sites), NotI (2 sites), and SfiI (2 sites) were included. The resulting map consists of 185 restriction sites, has a mean resolution of 4.4 kbp, and predicts a genome size of 809 kbp. In addition, several genes were identified and mapped to their respective genomic EcoRI restriction fragments.     

The Neurospora crassa genome: cosmid libraries sorted by chromosome

A Neurospora crassa cosmid library of 12,000 clones (at least nine genome equivalents) has been created using an improved cosmid vector pLorist6Xh, which contains a bacteriophage lambda origin of replication for low-copy-number replication in bacteria and the hygromycin phosphotransferase marker for direct selection in fungi. The electrophoretic karyotype of the seven chromosomes comprising the 42.9-Mb N. crassa genome was resolved using two translocation strains. Using gel-purified chromosomal DNAs as probes against the new cosmid library and the commonly used medium-copy-number pMOcosX N. crassa cosmid library in two independent screenings, the cosmids were assigned to chromosomes. Assignments of cosmids to linkage groups on the basis of the genetic map vs. the electrophoretic karyotype are 93 +/- 3% concordant. The size of each chromosome-specific subcollection of cosmids was found to be linearly proportional to the size of the particular chromosome. Sequencing of an entire cosmid containing the qa gene cluster indicated a gene density of 1 gene per 4 kbp; by extrapolation, 11,000 genes would be expected to be present in the N. crassa genome. By hybridizing 79 nonoverlapping cosmids with an average insert size of 34 kbp against cDNA arrays, the density of previously characterized expressed sequence tags (ESTs) was found to be slightly <1 per cosmid (i.e., 1 per 40 kbp), and most cosmids, on average, contained an identified N. crassa gene sequence as a starting point for gene identification.     

Nucleomorph and plastid genome sequences of the chlorarachniophyte Lotharella oceanica: convergent reductive evolution and frequent recombination in nucleomorph-bearing algae

Background

Nucleomorphs are residual nuclei derived from eukaryotic endosymbionts in chlorarachniophyte and cryptophyte algae. The endosymbionts that gave rise to nucleomorphs and plastids in these two algal groups were green and red algae, respectively. Despite their independent origin, the chlorarachniophyte and cryptophyte nucleomorph genomes share similar genomic features such as extreme size reduction and a three-chromosome architecture. This suggests that similar reductive evolutionary forces have acted to shape the nucleomorph genomes in the two groups. Thus far, however, only a single chlorarachniophyte nucleomorph and plastid genome has been sequenced, making broad evolutionary inferences within the chlorarachniophytes and between chlorarachniophytes and cryptophytes difficult. We have sequenced the nucleomorph and plastid genomes of the chlorarachniophyte Lotharella oceanica in order to gain insight into nucleomorph and plastid genome diversity and evolution.

Results

The L. oceanica nucleomorph genome was found to consist of three linear chromosomes totaling ~610 kilobase pairs (kbp), much larger than the 373 kbp nucleomorph genome of the model chlorarachniophyte Bigelowiella natans. The L. oceanica plastid genome is 71 kbp in size, similar to that of B. natans. Unexpectedly long (~35 kbp) sub-telomeric repeat regions were identified in the L. oceanica nucleomorph genome; internal multi-copy regions were also detected. Gene content analyses revealed that nucleomorph house-keeping genes and spliceosomal intron positions are well conserved between the L. oceanica and B. natans nucleomorph genomes. More broadly, gene retention patterns were found to be similar between nucleomorph genomes in chlorarachniophytes and cryptophytes. Chlorarachniophyte plastid genomes showed near identical protein coding gene complements as well as a high level of synteny.

Conclusions

We have provided insight into the process of nucleomorph genome evolution by elucidating the fine-scale dynamics of sub-telomeric repeat regions. Homologous recombination at the chromosome ends appears to be frequent, serving to expand and contract nucleomorph genome size. The main factor influencing nucleomorph genome size variation between different chlorarachniophyte species appears to be expansion-contraction of these telomere-associated repeats rather than changes in the number of unique protein coding genes. The dynamic nature of chlorarachniophyte nucleomorph genomes lies in stark contrast to their plastid genomes, which appear to be highly stable in terms of gene content and synteny.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-374) contains supplementary material, which is available to authorized users.     

Organization of the Tgm Family of Transposable Elements in Soybean

We have compared the organization of six Tgm elements that were selected from a genomic library of soybean DNA on the basis of hybridization with subcloned regions of Tgm 1 (transposon, Glycine max) from the seed lectin gene. These elements ranged in size from 1.6 kbp to greater than 12 kbp. Tgm2, Tgm3, Tgm4 and Tgm5 represent partial isolates in which the genomic clone contained a 3' but not a 5' terminus of the element; while Tgm6 and Tgm7, like Tgm1, were small isolates flanked by both 5' and 3' nonelement sequences. Cross-hybridization studies between subcloned portions of these seven elements identified regions of homology which suggest that the Tgm transposable elements of soybean form a family of deletion derivatives. In addition to internal deletion events, numerous deletions and base substitutions are also present within the borders of these elements which are comprised of the same tandemly repeated sequence. The 39% amino acid homology between a 1 kb portion of an open reading frame in Tgm4 and Tgm5 and ORF1, an open frame from the first intron of the maize Enhancer (Suppressor-mutator) transposable element, suggests that both elements encode a common function that requires a high degree of protein conservation.     

Cellular transformation by subgenomic feline sarcoma virus DNA

The genome of the Snyder-Theilen strain of feline sarcoma virus (ST-FeSV) is a 4.3-kilobase-pair (kbp) RNA molecule that contains a 1.5-kbp cellular insertion (fes gene) flanked by feline leukemia virus sequences at its 5' end (1.6 kbp) and 3' end (1.2 kbp) (Sherr et al., J. Virol. 34:200-212, 1980). DNA transfection techniques have been utilized to determine the regions of the ST-FeSV genome involved in malignant transformation. I have found that the 3.7-kbp 5'-end fragment of the ST-FeSV provirus (which corresponds to the 3.4-kbp 5'-end fragment of the viral genome) is sufficient to transform NIH/3T3 fibroblasts. Enzymes that cleave the ST-FeSV provirus DNA within the feline leukemia virus gag gene sequences or within the fes gene abolished the transforming activity. Preservation of the proviral large terminal repeats was also required for transformation. Transformed NIH/3T3 cells obtained by transfection of total or subgenomic ST-FeSV DNA expressed normal levels of the ST-FeSV gene product ST P85 and of its associated protein kinase activity. Furthermore, these cells contained high levels of phosphotyrosine residues, a biochemical marker associated with cellular transformation induced by certain retroviruses including ST-FeSV. These results, taken together, strongly support the concept that only those ST-FeSV proviral sequences necessary for ST P85 expression are involved in malignant transformation.     

Cloning of the complete Mycoplasma pneumoniae genome.

The complete genome of Mycoplasma pneumoniae was cloned in an ordered library consisting of 34 overlapping or adjacent cosmids, one plasmid and two lambda phages. The genome size was determined by adding up the sizes of either the individual unique EcoRI restriction fragments of the gene bank or of the XhoI fragments of genomic M. pneumoniae DNA. The values from these calculations, 835 and 849 kbp, are in good agreement. An XhoI restriction map was constructed by identifying adjacent DNA fragments by probing with selected cosmid clones.     

Physical map of the aromatic amine and m-toluate catabolic plasmid pTDN1 in Pseudomonas putida: location of a unique meta-cleavage pathway

A restriction endonuclease map was derived for the aromatic amine and m-toluate catabolic plasmid pTDN1 present in Pseudomonas putida UCC22, a derivative of P. putida mt-2. The plasmid is 79 +/- 1 kbp in size and can be divided into a restriction-site-deficient region of 51 +/- 1 kbp and a restriction-site-profuse region of 28 kbp which begins and ends with directly repeating sequences of at least 2 kbp in length. A mutant plasmid isolated after growth of the host on benzoate had lost the restriction-profuse region by a straightforward recombinational loss retaining one copy of the direct repeat. Analysis of clones, deletion and Tn5 insertion mutants strongly suggested that the meta-cleavage pathway of pTDN1 was situated in the region readily deleted. The catechol 2,3-dioxygenase (C23O) gene of pTDN1 showed no hybridization or restriction homology to previously described C23O genes of TOL plasmids pWW0 and pWW15. In addition, there was little homology between intact pTDN1, pWW0 and pWW15, suggesting the presence of a unique meta-cleavage pathway. We also demonstrated that pTDN1 did not originate from P. putida mt-2 chromosome.     

Plasmid integration in a wide range of bacteria mediated by the integrase of Lactobacillus delbrueckii bacteriophage mv4.

Bacteriophage mv4 is a temperate phage infecting Lactobacillus delbrueckii subsp. bulgaricus. During lysogenization, the phage integrates its genome into the host chromosome at the 3' end of a tRNA(Ser) gene through a site-specific recombination process (L. Dupont et al., J. Bacteriol., 177:586-595, 1995). A nonreplicative vector (pMC1) based on the mv4 integrative elements (attP site and integrase-coding int gene) is able to integrate into the chromosome of a wide range of bacterial hosts, including Lactobacillus plantarum, Lactobacillus casei (two strains), Lactococcus lactis subsp. cremoris, Enterococcus faecalis, and Streptococcus pneumoniae. Integrative recombination of pMC1 into the chromosomes of all of these species is dependent on the int gene product and occurs specifically at the pMC1 attP site. The isolation and sequencing of pMC1 integration sites from these bacteria showed that in lactobacilli, pMC1 integrated into the conserved tRNA(Ser) gene. In the other bacterial species where this tRNA gene is less or not conserved; secondary integration sites either in potential protein-coding regions or in intergenic DNA were used. A consensus sequence was deduced from the analysis of the different integration sites. The comparison of these sequences demonstrated the flexibility of the integrase for the bacterial integration site and suggested the importance of the trinucleotide CCT at the 5' end of the core in the strand exchange reaction.     

Prevalence of novel repeat sequences in and around the P1 operon in the genome of Mycoplasma pneumoniae

The presence of numerous different repetitive elements in the genome of Mycoplasma pneumoniae has been documented by several laboratories. One which we previously identified, denoted as SDC1, has now been further characterized, verified to be distinct from those discussed in previous publications and shown to lack homology to several other species of Mycoplasma when tested under our stringency conditions. As many as eight versions of the SDC1-type repeat, which is more than 400 bp long, are scattered throughout the genome of M. pneumoniae. The prototype for SDC1 is found within a gene encoding a putative 130-kDa membrane-binding protein lying just downstream from the gene encoding the cytadhesin protein P1. In fact, all of the reported M. pneumoniae repetitive elements have at least one representative either within or adjacent to the P1 operon; many if not all of these lie within open reading frames. The function of these repetitive elements is still unclear.     

Five major nuclear ribosomal repeats represent a large and variable fraction of the genomic DNA of Picea rubens and P. mariana.

The nuclear ribosomal repeats for the 18S, 5.8S, and 26S RNAs of two closely related Picea (spruce) species were characterized by restriction mapping and Southern blot hybridization. Restriction polymorphisms were identified in the IGS and ITS sequences; however, no polymorphism was species specific. As many as five different rDNA repeat units were observed in individual genomes. The repeat size for these gymnosperms ranged from a minimum of 32 kbp to greater than 40 kbp, two- to threefold larger than the typical angiosperm rDNA unit. Slot-blot hybridizations were used to determine the nuclear rDNA copy concentration. Among P. rubens individuals threefold variation was observed in the rDNA copy concentration, and among P. mariana individuals such variation was as much as sixfold. At a size greater than 32 kbp and at a concentration averaging 1.2-1.3 x 10(4) copies/pg, the rDNA constitutes approximately 4% of the total genome. Regression analysis revealed a significant relationship between copy concentration of the rDNA repeat unit in P. rubens and geographic origins. Differences in the rDNA content in Picea could contribute to the variation, in overall genome size, that has been observed within conifer species.     

Tec3, a new developmentally eliminated DNA element in Euplotes crassus

More than 100,000 interstitial segments of DNA (internal eliminated sequences [IESs]) are excised from the genome during the formation of a new macronucleus in Euplotes crassus. IESs include unique sequence DNA as well as two related families of transposable elements, Tec1 and Tec2. Here we describe a new class of E. crassus transposons, Tec3, which is present in 20 to 30 copies in the micronuclear genome. Tec3 elements have long inverted terminal repeats and contain a degenerate open reading frame encoding a tyrosine-type recombinase. One characterized copy of Tec3 (Tec3-1) is 4.48 kbp long, has 1.23-kbp inverted terminal repeats, and resides within the micronuclear copy of the ribosomal protein L29 gene (RPL29). The 23 bp at the extreme ends of this element are very similar to those in other E. crassus IESs and, like these other IESs, Tec3-1 is excised during the polytene chromosome stage of macronuclear development to generate a free circular form with an unusual junction structure. In contrast, a second cloned element, Tec3-2, is quite similar to Tec3-1 but lacks the terminal 258 bp of the inverted repeats, so that its ends do not resemble the other E. crassus IES termini. The Tec3-2 element appears to reside in a large segment of the micronuclear genome that is subject to developmental elimination. Models for the origins of these two types of Tec3 elements are presented, along with a discussion of how some members of this new transposon family may have come to be excised by the same machinery that removes other E. crassus IESs.     

Decoding the massive genome of loblolly pine using haploid DNA and novel assembly strategies

Background

The size and complexity of conifer genomes has, until now, prevented full genome sequencing and assembly. The large research community and economic importance of loblolly pine, Pinus taeda L., made it an early candidate for reference sequence determination.

Results

We develop a novel strategy to sequence the genome of loblolly pine that combines unique aspects of pine reproductive biology and genome assembly methodology. We use a whole genome shotgun approach relying primarily on next generation sequence generated from a single haploid seed megagametophyte from a loblolly pine tree, 20-1010, that has been used in industrial forest tree breeding. The resulting sequence and assembly was used to generate a draft genome spanning 23.2 Gbp and containing 20.1 Gbp with an N50 scaffold size of 66.9 kbp, making it a significant improvement over available conifer genomes. The long scaffold lengths allow the annotation of 50,172 gene models with intron lengths averaging over 2.7 kbp and sometimes exceeding 100 kbp in length. Analysis of orthologous gene sets identifies gene families that may be unique to conifers. We further characterize and expand the existing repeat library based on the de novo analysis of the repetitive content, estimated to encompass 82% of the genome.

Conclusions

In addition to its value as a resource for researchers and breeders, the loblolly pine genome sequence and assembly reported here demonstrates a novel approach to sequencing the large and complex genomes of this important group of plants that can now be widely applied.     

Inheritance and structure of foreign DNA in progenies of transgenic tobacco obtained by direct gene transfer

Summary One of the transformed tobacco plants obtained by direct DNA transformation possessed two marker genes, a chimeric aminoglycoside phosphotransferase and nopaline synthase genes. Selfed progenies of this plant (T3-d) showed stable inheritance of these two genes. The minimum size of foreign DNA integrated into tobacco genome was estimated to be 5.4 kbp. A deleted nopaline synthase gene co-existed with an intact gene. The linkage analysis indicated that two transformants, T1-b and T3-c, possessed foreign DNA inserted in different chromosomes or in different sites of the same chromosome that recombine freely.     

Distribution and structure of cloned P elements from the Drosophila melanogaster P strain pi 2.

P transposable elements of Drosophila melanogaster cloned from the strong P strain pi 2 have been analysed. The structures and chromosomal locations of 26 of the 30-50 elements estimated to be present in pi 2 have been determined. At one location two elements are inserted 100 base pairs (bp) apart, and in a second location two elements are only separated by the 8 bp duplicated upon P-element insertion. In addition to 2.9 kilobase-pair (kbp) elements, elements with 14 different internal deletions from 1.3 to 2.3 kbp in size have been isolated. There are 7 copies of the 2.9 kbp element, 2 copies each of 5 internally deleted elements and a single copy of 9 internally deleted elements. One of the elements found twice is the KP element, which may play a role in the regulation of hybrid dysgenesis in strains which contain many copies of this element. Apart from internal deletions the elements are extremely homogeneous in DNA sequence, with only 2 single base polymorphisms detected twice each in over 16 kbp of P-element sequence. Although transpositions are infrequent in an inbred P cytotype strain such as pi 2, the distribution of these cloned elements indicates that when the genomic library was made, the strain was polymorphic with respect to element location. The distribution and structures of the element are discussed with respect to models for regulation of P-element transposition.