A pH-dependent dimer lock in spider silk protein

Spider dragline silk, one of the strongest polymers in nature, is composed of proteins termed major ampullate spidroin (MaSp) 1 and MaSp2. The N-terminal (NT) domain of MaSp1 produced by the nursery web spider Euprosthenops australis acts as a pH-sensitive relay, mediating spidroin assembly at around pH 6.3. Using amide hydrogen/deuterium exchange combined with mass spectrometry (MS), we detected pH-dependent changes in deuterium incorporation into the core of the NT domain, indicating global structural stabilization at low pH. The stabilizing effects were diminished or abolished at high ionic strength, or when the surface-exposed residues Asp40 and Glu84 had been exchanged with the corresponding amides. Nondenaturing electrospray ionization MS revealed the presence of dimers in the gas phase at pH values below—but not above—6.4, indicating a tight electrostatic association that is dependent on Asp40 and Glu84 at low pH. Results from analytical ultracentrifugation support these findings. Together, the data suggest a mechanism whereby lowering the pH to < 6.4 results in structural changes and alteration of charge-mediated interactions between subunits, thereby locking the spidroin NT dimer into a tight entity important for aggregation and silk formation.     

Spidroins from the Brazilian spider Nephilengys cruentata (Araneae: Nephilidae)

Spiders produce up to six different kinds of silk, each one for a specific biological function. Spider silks are also known for their unique mechanical properties. The possibility of producing new materials with similar properties motivated research on these silk proteins (spidroins). Using expression sequence tags, we identified four spidroins produced by major ampullate, minor ampullate, flagelliform and tubuliform silk glands from the Brazilian spider Nephilengys cruentata (Araneae: Nephilidae). The new protein sequences showed substantial similarity to other spidroins previously described, with high content of alanine and glycine due to the presence of the highly repetitive motifs (polyAla, (GA)_n, (GGX)_n, (GPGGX)_n). Similarities among sequences were also observed between the different spidroins with the exception of tubuliform spidroin, which presents a unique complex amino acid sequence with high amounts of serine and low amounts of glycine.     

Molecular and mechanical properties of major ampullate silk of the black widow spider, Latrodectus hesperus

Molecular and material properties of major ampullate silk were studied for the cobweb-building black widow spider Latrodectus hesperus. Material properties were measured by stretching the silk to breaking. The strength was 1.0 +/- 0.2 GPa, and the extensibility was 34 +/- 8%. The secondary structure of the major ampullate silk protein was studied using carbon-13 NMR spectroscopy. Alanine undergoes a transition from a coiled structure in pre-spun silk to a beta sheet structure in post-spun silk. We have also isolated two distinct cDNAs (both about 500 bp) which encode proteins similar to major ampullate spidroin 1 and 2 (MaSp1 and MaSp2). The MaSp1-like silk contains polyalanine runs of 5-10 residues as well as GA and GGX motifs. The MaSp2-like silk contains polyalanine runs of varying length as well as GPG(X)(n) motifs. L. hesperus major ampullate silk is more like major ampullate silk from other species than other L. hesperus silks.     

N-terminal nonrepetitive domain common to dragline, flagelliform, and cylindriform spider silk proteins

Spider silk has been extensively studied for its outstanding mechanical properties. Partial intermediate and C-terminal sequences of different spider silk proteins have been determined, and during the past decade also N-terminal domains have been characterized. However, only some of these N-terminal domains have been reported to contain signal peptides, leaving the mechanism whereby they enter the secretory pathway open to speculation. Here we present the sequence of a 394-residue N-terminal region of the Euprosthenops australis major ampullate spidroin 1 (MaSp1). A close comparison with published sequences from other species revealed the presence of N-terminal signal peptides followed by an approximately 130-residue nonrepetitive domain. From secondary structure predictions, helical wheel analysis, and circular dichroism spectroscopy this domain is concluded to contain five alpha-helices and is a conserved constituent of hitherto analyzed dragline, flagelliform, and cylindriform spider silk proteins.     

A MaSp2-like gene found in the Amazon mygalomorph spider Avicularia juruensis

Two unique spidroins are present in the silk of the Amazon mygalomorph spider — Avicularia juruensis (Theraphosidae), and for the first time the presence and expression of a major ampullate spidroin 2-like in Mygalomorphae are demonstrated. Molecular analysis showed the presence of (GA)_n, poly-A and GPGXX motifs in the amino acid sequence of Spidroin 2, the last being a motif described so far only in MaSp2 and Flag spidroins. Phylogenetic analysis confirmed the previously known orthologous silk gene clusters, and placed this gene firmly within the orbicularian MaSp2 clade. Gene tree–species tree reconciliations show a pattern of multiple gene duplication throughout spider silk evolution, and pinpoint the oldest speciation in which MaSps must have been present in spiders on the mygalomorph–araneomorph split, 240 MYA. Therefore, while not refuting orb weaver monophyly, MaSp2s, and major ampullate silks in general cannot be classified as orbicularian synapomorphies, but have to be considered plesiomorphic for Opisthothelae. The evidence presented here challenges the simplified notion that mygalomorphs spin only one kind of silk, and adds to the suite of information suggesting a pattern of early niche diversification between Araneomorphae and Mygalomorphae. Additionally, mygalomorph MaSp2-like might accommodate mechanical demands arising from the arboreal habitat preference of Avicularia.     

NMR assignments of the N-terminal domain of Nephila clavipes spidroin 1

The building blocks of spider dragline silk are two fibrous proteins secreted from the major ampullate gland named spidroins 1 and 2 (MaSp1, MaSp2). These proteins consist of a large central domain composed of approximately 100 tandem copies of a 35–40 amino acid repeat sequence. Non-repetitive N and C-terminal domains, of which the C-terminal domain has been implicated to transition from soluble and insoluble states during spinning, flank the repetitive core. The N-terminal domain until recently has been largely unknown due to difficulties in cloning and expression. Here, we report nearly complete assignment for all ¹H, ¹³C, and ¹⁵N resonances in the 14 kDa N-terminal domain of major ampullate spidroin 1 (MaSp1-N) of the golden orb-web spider Nephila clavipes.     

Expression and characterization of chimeric spidroins from flagelliform-aciniform repetitive modules

Spiders can produce up to seven different types of silks or glues with different mechanical properties. Of these, flagelliform (Flag) silk is the most elastic, and aciniform (AcSp1) silk is the toughest. To produce a chimeric spider silk (spidroin) Flag_R-AcSp1_R, we fused one repetitive module of flagelliform silk from Araneus ventricosus and one repetitive module of aciniform silk from Argiope trifasciata. The recombinant protein expressed in E. coli formed silk-like fibers by manual-drawing. CD analysis showed that the secondary structure of Flag_R-AcSp1_R spidroin remained stable during the gradual reduction of pH from 7.0 to 5.5. The spectrum of FTIR indicated that the secondary structure of Flag_R-AcSp1_R changed from α-helix to β-sheet. The conformation change of Flag_R-AcSp1_R was similar to other spidroins in the fiber formation process. SEM analysis revealed that the mean diameter of the fibers was around 1 ~ 2 μm, and the surface was smooth and uniform. The chimeric fibers exhibited superior toughness (~33.1 MJ/m³) and tensile strength (~261.4 MPa). This study provides new insight into design of chimeric spider silks with high mechanical properties.     

Spidroin N-terminal domain promotes a pH-dependent association of silk proteins during self-assembly

Spider silks are spun from concentrated solutions of spidroin proteins. The appropriate timing of spidroin assembly into organized fibers must be highly regulated to avoid premature fiber formation. Chemical and physical signals presented to the silk proteins as they pass from the ampulle and through the tapered duct include changes in ionic environment and pH as well as the introduction of shear forces. Here, we show that the N-terminal domain of spidroins from the major ampullate gland (MaSp-NTDs) for both Nephila and Latrodectus spiders associate noncovalently as homodimers. The MaSp-NTDs are highly pH-responsive and undergo a structural transition in the physiological pH range of the spider duct. Tryptophan fluorescence of the MaSp-NTDs reveals a change in conformation when pH is decreased, and the pH at which the transition occurs is determined by the amount and type of salt present. Size exclusion chromatography and pulldown assays both indicate that the lower pH conformation is associated with a significantly increased MaSp-NTD homodimer stability. By transducing the duct pH signal into specific protein-protein interactions, this conserved spidroin domain likely contributes significantly to the silk-spinning process. Based on these results, we propose a model of spider silk assembly dynamics as mediated through the MaSp-NTD.     

An investigation of the divergence of major ampullate silk fibers from Nephila clavipes and Argiope aurantia

The major ampullate fiber of both Nephila clavipes and Argiope aurantia is composed of two different proteins, MaSp1 and MaSp2. Each of these proteins has a highly conserved pattern of silk-associated amino acid motifs. The GPGXX motif is the only source of proline and is unique to MaSp2. On the basis of the percent of proline, Nephila clavipes major ampullate silk was calculated to consist of 19% MaSp2 and 81% MaSp1, while Argiope aurantia was calculated to have a significantly higher MaSp2 content of 59% with MaSp1 comprising the remaining 41%. To investigate the functional implications of the difference in protein composition, major ampullate silk fibers from Nephila clavipes and Argiope aurantia were mechanically tested and compared. Stress-strain curves produced from polynomial regression show that the two significant differences between major ampullate silk fibers from Nephila clavipes and Argiope aurantia are the average peak load stress and Young's modulus, with Argiope higher for both.     

Containment of Extended Length Polymorphisms in Silk Proteins

The spider silk gene family to the current date has been developed by gene duplication and homogenization events as well as conservation of crucial sequence parts. These evolutionary processes have created an amazing diversity of silk types each associated with specific properties and functions. In addition, they have led to allelic and gene variants within a species as exemplified by the major ampullate spidroin 1 gene of Nephila clavipes. Due to limited numbers of individuals screened to date little is known about the extent of these heterogeneities and how they are finally manifested in the proteins. Using expanded sample sizes, we show that sequence variations expressed as deletions or insertions of tri-nucleotides lead to different sized and structured repetitive units throughout a silk protein. Moreover, major ampullate spidroins 1 can quite dramatically differ in their overall lengths; however, extreme variants do not spread widely in a spider population. This suggests that a certain size range stabilized by purifying selection is important for spidroin 1 gene integrity and protein function. More than one locus for spidroin 1 genes possibly exist within one individual genome, which are homogenized in size, are differentially expressed and give a spider a certain degree of adaptation on silk’s composition and properties. Such mechanisms are shared to a lesser extent by the second major ampullate spidroin gene.     

The molecular structures of major ampullate silk proteins of the wasp spider,Argiope bruennichi: A second blueprint for synthesizing de novo silk

The dragline silk of orb-weaving spiders possesses extremely high tensile strength and elasticity. To date, full-length sequences of only two genes encoding major ampullate silk protein (MaSp) in Latrodectus hesperus have been determined. In order to further understand this gene family, we utilized in this study a variety of strategies to isolate full-length MaSp1 and MaSp2 cDNAs in the wasp spider Argiope bruennichi. A. bruennichi MaSp1 and MaSp2 are primarily composed of remarkably homogeneous ensemble repeats containing several complex motifs, and both have highly conserved C-termini and N-termini. Two novel amino acid motifs, GGF and SGR, were found in MaSp1 and MaSp2, respectively. Amino acid composition analysis of silk, luminal contents and predicted sequences indicates that MaSp1 and MaSp2 are two major components of major ampullate glands and that the ratio of MaSp1 to MaSp2 is approximately 3:2 in dragline silk. Furthermore, both the MaSp1:MaSp2 ratio and the conserved termini are closely linked with the production of high quality synthetic fibers. Our results make an important contribution to our understanding of major ampullate silk protein structure and provide a second blueprint for creating new composite silk which mimics natural spider dragline silk.     

Secretory production of spider silk proteins in metabolically engineered Corynebacterium glutamicum for spinning into tough fibers

Spider dragline silk is a remarkable fiber made of unique proteins—spidroins—secreted and stored as a concentrated aqueous dope in the major ampullate gland of spiders. This feat has inspired engineering of microbes to secrete spidroins for spinning into tough synthetic fibers, which remains a challenge due to the aggregation-prone feature of the spidroins and low secretory capacity of the expression hosts. Here we report metabolic engineering of Corynebacterium glutamicum to efficiently secrete recombinant spidroins. Using a model spidroin MaSpI16 composed of 16 consensus repeats of the major ampullate spidroin 1 of spider Trichonephila clavipes, we first identified the general Sec protein export pathway for its secretion via N-terminal fusion of a translocation signal peptide. Next we improved the spidroin secretion levels by selection of more suitable signal peptides, multiplexed engineering of the bacterial host, and by high cell density cultivation of the resultant recombinant strains. The high abundance (>65.8%) and titer (554.7 mg L^–1) of MaSpI16 in the culture medium facilitated facile, chromatography-free recovery of the spidroin with a purity of 93.0%. The high solubility of the purified spidroin enabled preparation of highly concentrated aqueous dope (up to 66%) amenable for spinning into synthetic fibers with an appreciable toughness of 70.0 MJ m⁻³. The above metabolic and processing strategies were also found applicable for secretory production of the higher molecular weight spidroin MaSpI64 (64 consensus repeats) to yield similarly tough fibers. These results suggest the good potential of secretory production of protein polymers for sustainable supply of fibrous materials.     

Conformational and orientational transformation of silk proteins in the major ampullate gland of Nephila clavipes spiders

The orientational and conformational transformation of the native liquid silk into a solid fiber in the major ampullate gland of the spider Nephila clavipes has been studied by Raman spectromicroscopy. The spectra show that the conformation of silk proteins in the glandular sac contains several secondary structure elements, which is consistent with intrinsically unfolded proteins. A few alpha-helices are also present and involve some alanine residues located in the polyalanine segments of the spidroin sequence. The conversion of the silk solution in the major ampullate gland appears to be a two-state process without intermediate states. In the first and second limbs of the duct, silk is isotropic and spidroins are generally native-like. beta-Sheets start to develop between the second and the third limb of the duct, suggesting that early beta-sheets are generated by shear forces. However, most of the beta-sheets are formed between the draw down taper and the valve. The early beta-sheets formed upward of the draw down taper might play the role of nucleation sites for the subsequent beta-sheet aggregation. The alignment of the polypeptides chains occurs near the valve, revealing that orientational and conformational changes do not occur simultaneously. Extensional flow seems to be the driving force to produce the orientational order, which in turn is associated with the formation of the major part of the beta-sheets. The slow evolution of the spidroin conformation up to the draw down taper followed by the rapid transformation between the drawn down taper and the valve may be important to achieve the optimal structure of the final fiber.     

pH-Dependent Dimerization of Spider Silk N-Terminal Domain Requires Relocation of a Wedged Tryptophan Side Chain

Formation of spider silk from its constituent proteins—spidroins—involves changes from soluble helical/coil conformations to insoluble β-sheet aggregates. This conversion needs to be regulated to avoid precocious aggregation proximally in the silk gland while still allowing rapid silk assembly in the distal parts. Lowering of pH from about 7 to 6 is apparently important for silk formation. The spidroin N-terminal domain (NT) undergoes stable dimerization and structural changes in this pH region, but the underlying mechanisms are incompletely understood. Here, we determine the NMR and crystal structures of Euprosthenops australis NT mutated in the dimer interface (A72R). Also, the NMR structure of wild‐type (wt) E. australis NT at pH 7.2 and 300 mM sodium chloride was determined. The wt NT and A72R structures are monomers and virtually identical, but they differ from the subunit structure of dimeric wt NT mainly by having a tryptophan (W10) buried between helix 1 and helix 3, while W10 is surface exposed in the dimer. Wedging of the W10 side chain in monomeric NT tilts helix 3 approximately 5–6 Å into a position that is incompatible with that of the observed dimer structure. The structural differences between monomeric and dimeric NT domains explain the tryptophan fluorescence patterns of NT at pH 7 and pH 6 and indicate that the biological function of NT depends on conversion between the two conformations.     

Early events in the evolution of spider silk genes

Silk spinning is essential to spider ecology and has had a key role in the expansive diversification of spiders. Silk is composed primarily of proteins called spidroins, which are encoded by a multi-gene family. Spidroins have been studied extensively in the derived clade, Orbiculariae (orb-weavers), from the suborder Araneomorphae ('true spiders'). Orbicularians produce a suite of different silks, and underlying this repertoire is a history of duplication and spidroin gene divergence. A second class of silk proteins, Egg Case Proteins (ECPs), is known only from the orbicularian species, Lactrodectus hesperus (Western black widow). In L. hesperus, ECPs bond with tubuliform spidroins to form egg case silk fibers. Because most of the phylogenetic diversity of spiders has not been sampled for their silk genes, there is limited understanding of spidroin gene family history and the prevalence of ECPs. Silk genes have not been reported from the suborder Mesothelae (segmented spiders), which diverged from all other spiders >380 million years ago, and sampling from Mygalomorphae (tarantulas, trapdoor spiders) and basal araneomorph lineages is sparse. In comparison to orbicularians, mesotheles and mygalomorphs have a simpler silk biology and thus are hypothesized to have less diversity of silk genes. Here, we present cDNAs synthesized from the silk glands of six mygalomorph species, a mesothele, and a non-orbicularian araneomorph, and uncover a surprisingly rich silk gene diversity. In particular, we find ECP homologs in the mesothele, suggesting that ECPs were present in the common ancestor of extant spiders, and originally were not specialized to complex with tubuliform spidroins. Furthermore, gene-tree/species-tree reconciliation analysis reveals that numerous spidroin gene duplications occurred after the split between Mesothelae and Opisthothelae (Mygalomorphae plus Araneomorphae). We use the spidroin gene tree to reconstruct the evolution of amino acid compositions of spidroins that perform different ecological functions.     

Engineered disulfides improve mechanical properties of recombinant spider silk

Nature's high‐performance polymer, spider silk, is composed of specific proteins, spidroins, which form solid fibers. So far, fibers made from recombinant spidroins have failed in replicating the extraordinary mechanical properties of the native material. A recombinant miniature spidroin consisting of four poly‐Ala/Gly‐rich tandem repeats and a nonrepetitive C‐terminal domain (4RepCT) can be isolated in physiological buffers and undergoes self assembly into macrofibers. Herein, we have made a first attempt to improve the mechanical properties of 4RepCT fibers by selective introduction of AA → CC mutations and by letting the fibers form under physiologically relevant redox conditions. Introduction of AA → CC mutations in the first poly‐Ala block in the miniature spidroin increases the stiffness and tensile strength without changes in ability to form fibers, or in fiber morphology. These improved mechanical properties correlate with degree of disulfide formation. AA → CC mutations in the forth poly‐Ala block, however, lead to premature aggregation of the protein, possibly due to disulfide bonding with a conserved Cys in the C‐terminal domain. Replacement of this Cys with a Ser, lowers thermal stability but does not interfere with dimerization, fiber morphology or tensile strength. These results show that mutagenesis of 4RepCT can reveal spidroin structure‐activity relationships and generate recombinant fibers with improved mechanical properties.     

Microstructure of the silk apparatus of the comb-footed spider, Achaearanea tepidariorum (Araneae: Theridiidae)

The microstructural organization of the silk‐spinning apparatus of the comb‐footed spider, Achaearanea tepidariorum, was observed by using a field emission scanning electron microscope. The silk glands of the spider were classified into six groups: ampullate, tubuliform, flagelliform, aggregate, aciniform and pyriform glands. Among these, three types of silk glands, the ampullate, pyriform and aciniform glands, occur only in female spiders. One (adult) or two (subadult) pairs of major ampullate glands send secretory ductules to the anterior spinnerets, and another pair of minor ampullate glands supply the median spinnerets. Three pairs of tubuliform glands in female spiders send secretory ductules to the median (one pair) and posterior (two pairs) spinnerets. Furthermore, one pair of flagelliform glands and two pairs of aggregate glands together supply the posterior spinnerets, and form a characteristic spinning structure known as a “triad” spigot. In male spiders, this combined apparatus of the flagelliform and the aggregate spigots for capture thread production is not apparent, instead only a non‐functional remnant of this triad spigot is present. In addition, the aciniform glands send ductules to the median (two pairs) and the posterior spinnerets (12–16 pairs), and the pyriform glands feed silk into the anterior spinnerets (90–100 pairs in females and 45–50 pairs in males).