大肠癌双向电泳分离条件的建立及其初步分析

采用固相pH梯度等电聚焦为第一向,SDS-PAGE垂直电泳为第二向建立了大肠癌双向电泳分离技术实验条件,对样品的处理、水化、等电聚焦、凝胶平衡等步骤进行了优化,成功地获得了大肠癌分辨率高、重复性好的双向电泳图谱.癌组织样品经3次重复实验共获得蛋白质斑点数1 186±46个,蛋白质斑点位置在IEF方向平均偏差为1.67±0.29 mm,在SDS-PAGE方向为1.41±0.16 mm,蛋白质表达量的相对标准差为6.67 %±2.25 %.经ImageMaster 2D Elite软件初步分析后发现了一些差异表达的蛋白质.     

Two-dimensional gel electrophoresis for controlling and comparing culture supernatants of mammalian cell culture productions systems

A recombinant Chinese hamster ovary cell line, producing human erythropoietin, was cultivated in a continuous mode in a stirred tank reactor applying different dilution rates. In order to monitor the stability of this expression system, product and non-product proteins of the cell culture supernatant were analyzed by two-dimensional electrophoresis. The consistency of the isoforms of the recombinant product was determined by western blot combined with specific staining.The same cell line was propagated in a high cell density cultivation system based on macro-cell-aggregates. The patterns of secreted proteins of the cell line cultivated in the different systems were compared in order to detect modifications in protein expression of the product and of non product proteins relevant for cell culture supernatant.Hardly any alterations in two-dimensional pattern were detectable. The isoforms of erythropoietin, as well as the overall pattern of secreted proteins, detectable with the two-dimensional electrophoresis method were remarkably stable under different cultivation conditions.Abbreviations 2-DE two-dimensional electrophoresis - rCHO recombinant Chinese hamster ovary cell - EPO erythropoietin - FBR fluidized bed reactor - IEF isoelectric focusing - IPG immobilized pH gradient - pI isoelectric point - SDS sodium dodecylsulfate - STR stirred tank reactor     

Long-term operation of depth filter perfusion systems (DFPS) for monoclonal antibody production using recombinant CHO cells: Effect of temperature,pH, and dissolved oxygen

Recombinant CHO cells of DG44 origin (CS*13-1.00), expressing a chimeric antibody against the S surface antigen of the Hepatitis B virus, were cultivated in single-stage and two-stage depth filter perfusion systems (DFPS) under varying temperature, pH, and oxygen tension conditions to determine their effects on recombinant antibody production. A long-term culture was carried out in a single-stage depth filter for 81 days, during which an occasional clog interrupted the experiment. However, this problem was solved via trypsin injection. The DFPS showed a steady production of monoclonal antibody at a concentration of 100∼150 mg/L. As the cultivation temperature was increased from 33 to 37°C, the monoclonal antibody (Mab) concentration increased from 80.33 to 133.47 mg/L. Likewise, the glucose uptake rate (GUR) and lactate production rate (LPR) also increased. With an increase in pH from 6.95 to 7.61, the Mab concentration increased from 61.64 to 94.31 mg/L. When the oxygen tension was increased from 60 to 80%, the Mab concentration increased from 93.78 to 128.30 mg/L.     

拟南芥蛋白质组研究中双向电泳技术条件的优化

双向电泳技术是蛋白质组学研究中的关键技术,是目前分辨率最高的工具之一.而提高双向电泳图蛋白质点的数目和分辨率,可以提高蛋白质组技术平台的信息完整性.通过对拟南芥双向电泳技术过程中的适当改进,如蛋白质的提取与溶解方法、上样量和聚丙烯酰胺凝胶浓度,加入硫脲,硫代硫酸钠等,对拟南芥双向电泳技术进行了优化,提高了双向电泳图谱的蛋白质点数目与分辨率.     

Optimization of a mAb production process with regard to robustness and product quality using quality by design principles

Quality by Design principles are well described and widely used in biopharmaceutical industry. The characterization of a monoclonal antibody (mAb) production process is crucial for novel process development and control. Yet, the application throughout the entire upstream process was rarely demonstrated. Following previously published research, this study marks the second step toward a complete process characterization and is focused on the effect of critical process parameters on the antibody production efficiency and quality of the process. In order to conduct the complex Design of Experiments approach with optimal control and comparability, the ambr®15 micro bioreactor platform was used. Investigated parameters included the pH and dissolved oxygen set points, the initial viable cell density (iVCD) as well as the N‐1 duration. Various quality attributes (e.g., growth rate, viability, mAb titer, and peak proportion) were monitored and analyzed using multivariate data analysis to evaluate the parameter effects. The pH set point and the initial VCD were identified as key process parameters with strong influence on the cell growth as well as the mAb production and its proportion to the total protein concentration. For optimization and improvement in robustness of these quality attributes the pH must be increased to 7.2, while the iVCD must be lowered to 0.2 × 10⁶ cells/mL. Based on the defined design space, additional experiments verified the results and confirmed the intact bioactivity of the antibody. Thereby, process control strategies could be tuned toward high cell maintenance and mAb production, which enable optimal downstream processing.     

成年和老年小鼠脑蛋白质组双向电泳图谱比较

使用双向电泳(2-DE)比较成年和老年小鼠脑蛋白质差异,从分子水平初步探索老年脑蛋白整体变化规律.以固相pH梯度等电聚焦为第一向,SDS-聚丙烯酰胺凝胶水平电泳(PAGE)为第二向进行2-DE.图象分析软件Imagemaster^® 2D Elite分析电泳图谱.重复性实验结果显示,同组样品在三次不同实验中所得蛋白质斑点数目的相对标准差（变异系数）为4.43%±0.25%;同一蛋白质斑点在三次实验中等电点、分子质量和蛋白质量的相对标准差分别为8.76%±5.14%, 13.00%±4.22%和10.84%±9.16%.成年和老年小鼠脑组织2-DE图谱分别获得996和1256个蛋白质斑点,其中8个蛋白质在老年脑组织中含量降低,20个蛋白质斑点含量增加.另至少有4个蛋白质斑点在老年脑组织中缺失,14个蛋白质点为老年脑特有. 以上差异点的发现为研究脑老化和退行性疾病机理提供了有益的线索.     

Accelerating genome editing in CHO cells using CRISPR Cas9 and CRISPy,a web‐based target finding tool

Chinese hamster ovary (CHO) cells are widely used in the biopharmaceutical industry as a host for the production of complex pharmaceutical proteins. Thus genome engineering of CHO cells for improved product quality and yield is of great interest. Here, we demonstrate for the first time the efficacy of the CRISPR Cas9 technology in CHO cells by generating site‐specific gene disruptions in COSMC and FUT8, both of which encode proteins involved in glycosylation. The tested single guide RNAs (sgRNAs) created an indel frequency up to 47.3% in COSMC, while an indel frequency up to 99.7% in FUT8 was achieved by applying lectin selection. All eight sgRNAs examined in this study resulted in relatively high indel frequencies, demonstrating that the Cas9 system is a robust and efficient genome‐editing methodology in CHO cells. Deep sequencing revealed that 85% of the indels created by Cas9 resulted in frameshift mutations at the target sites, with a strong preference for single base indels. Finally, we have developed a user‐friendly bioinformatics tool, named “CRISPy” for rapid identification of sgRNA target sequences in the CHO‐K1 genome. The CRISPy tool identified 1,970,449 CRISPR targets divided into 27,553 genes and lists the number of off‐target sites in the genome. In conclusion, the proven functionality of Cas9 to edit CHO genomes combined with our CRISPy database have the potential to accelerate genome editing and synthetic biology efforts in CHO cells. Biotechnol. Bioeng. 2014; 111: 1604–1616. © 2014 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals, Inc.     

Assessment of cell engineering strategies for improved therapeutic protein production in CHO cells

Recombinant glycoprotein therapeutics have proven to be invaluable pharmaceuticals for the treatment of various diseases. Chinese hamster ovary (CHO) cells are widely used in industry for the production of these proteins. Several strategies for engineering CHO cells for improved protein production have been tried with considerable results. The focus has mainly been to increase the specific productivity and to extend the culture longevity by preventing programmed cell death. These CHO cell engineering strategies, particularly those developed in Korea, are reviewed here.     

Decoupling cell growth and product formation in Chinese hamster ovary cells through metabolic control.

The development of a strategy for the culture of Chinese hamster ovary (CHO) cells producing tissue plasminogen activator (t-PA) is investigated. This strategy is based on the replacement of the main carbon source, glucose, by another compound that is slowly metabolizable, particularly galactose. The introduction of this change allows for acute change in cell behavior at various levels. Cell growth is stopped after this nutrient shift, and the cells can be kept in long-duration culture at a low growth rate and high viability as compared with a culture strategy based solely on glucose utilization. Moreover, the capability of cells to produce recombinant proteins (t-PA in this work) can be maintained over the entire period of galactose feeding. From the metabolic point of view, use of a slowly metabolizable carbon source (galactose) introduces important changes in the production of lactate, ammonia, and some amino acids. The use of this metabolic shift enables the generation of biphasic processes, with a first phase with cell growth on glucose and a second stationary phase on galactose, which is particularly suited to perfusion systems.     

Long-term multiplication of the Chinese hamster ovary (CHO) cell line in a serum-free medium

Summary A new synthetic medium (referred to as GC₃) that supports the growth of the Chinese hamster ovary cell line has been developed. It is composed of a 1∶1 mixture of Ham's F12 and modified Eagle's minimum essential (MEM.S) mediums supplemented with transferrin (10 μg/ml), insulin (80 mU/ml), and selenium (1×10⁻⁷ M). Other more simple supplementations of our basal medium MEM.S/F12 (transferrin+insulin, transferrin+selenium, ferrous iron+selenium) also give good cell growth responses. Fibronectin or serum pretreatment is not needed for cellular attachment and spreading. Our culture system is characterized by a continuous serum-free cultivation (more than 200 doublings), a clonal growth, a high density proliferation, and a rapid growth rate near that of cells in serum-supplemented medium.     

Evaluation of different vector design strategies for the expression of recombinant monoclonal antibody in CHO cells

Monoclonal antibodies (mAbs) have emerged as the most promising category of recombinant proteins due to their high efficiency for the treatment of a wide range of human diseases. The complex nature of mAbs creates a great deal of challenges in both upstream and downstream manufacturing processes. Proportional expression and correct folding and assembly of the light chain and heavy chain are required for efficient production of the mAbs. In this regard, expression vector design has proven to have profound effects on the antibody expression level as well as its stability and quality. Here, we have explored the efficiency of different vector design strategies for the expression of a recombinant IgG1 antibody in Chinese hamster ovary (CHO) cells. The antibody expression level was analyzed in transient expression and stable cell pools followed by expression analysis on single-cell clones. While detectable amounts of antibody were observed in all three systems, dual-promoter single-vector system showed the highest expression level in transient and stable expression as well as the highest productivity among clonal cells. Our results here show the importance of vector design for successful production of whole mAbs in CHO cells.     

Comparison of Bcl-2 to a Bcl-2 deletion mutant for mammalian cells exposed to culture insults

Apoptosis has been found to occur in bioreactors as a result of environmental stresses. The overexpression of bcl-2 is a widely used strategy to limit the induction of apoptosis in mammalian cell cultures. In this study, the effectiveness of wild-type Bcl-2 was compared to a Bcl-2 mutant lacking the nonstructured loop domain in two commercially prominent cell lines, Chinese hamster ovary (CHO) and baby hamster kidney (BHK) cells. The generation of a DNA "ladder" and condensation of chromatin indicated that apoptosis occurred in these cell lines following Sindbis virus infection and serum deprivation. When cells were engineered to overexpress the bcl-2 mutant, cell death due to Sindbis virus was inhibited in a concentration-dependent manner. Furthermore, the Bcl-2 mutant provided increased protection as compared to wild-type Bcl-2 following two model insults, Sindbis virus infection and serum deprivation. Total production for a heterologous protein encoded on the Sindbis virus was increased in cell lines expressing the Bcl-2 variants compared to the parental cell line. In order to understand the reasons for the improved anti-apoptosis properties of the mutant, wild-type Bcl-2 and mutant Bcl-2 were examined by Western blot following each model insult. Wild-type Bcl-2 was observed to degrade into a 23 kDa fragment following both Sindbis virus infection and serum withdrawal in both cell lines, while the mutant Bcl-2 protein was not degraded during the same period. The processing of Bcl-2 was found to correlate with reduced cell viabilities following the two external insults to suggest that Bcl-2 degradation may limit its ability to inhibit apoptosis. These studies indicate that the cells regulate anti-apoptosis protein levels and these processing events can limit the effectiveness of cell death inhibition strategies in mammalian cell culture systems.     

Ixodes ricinus: the potential of two-dimensional gel electrophoresis as a tool for studying host-vector-pathogen interactions

Ixodes ricinus is a three-host tick, with three active instars. For moulting to occur the tick has to find a host where it can take a blood meal. Throughout feeding I. ricinus can be infected or infect the host with different pathogens, e.g., Tick-Borne Encephalitis virus or Borrelia burgdorferi. The host-vector-pathogen interaction is very complex, making a detailed study difficult. Here we analyse the potential of two-dimensional gel electrophoresis (2DE) to study the host-vector-pathogen interaction. We examined 20 nymphs, which as larvae parasitised either mouse or hen. After moulting, they were kept alive for up to 30 weeks, to analyse whether tick ageing influenced host determination, and for comparison of the 2D-gels. Even though the number of proteins in the gel decreased during ageing, some proteins of the host determination persisted for all 30 weeks. We also discovered persisting proteins in relation to nymphs. These findings showed that 2DE is suitable as a tool for studying host-vector-pathogen interactions.     

A strategy to accelerate protein production from a pool of clones in Chinese hamster ovary cells for toxicology studies

In the biopharmaceutical industry, a clonally derived cell line is typically used to generate material for investigational new drug (IND)‐enabling toxicology studies. The same cell line is then used to generate material for clinical studies. If a pool of clones can be used to produce material for IND‐enabling toxicology studies (Pool for Tox (PFT) strategy) during the time a lead clone is being selected for clinical material production, the toxicology studies can be accelerated significantly (approximately 4 months at Genentech), leading to a potential acceleration of 4 months for the IND submission. We explored the feasibility of the PFT strategy with three antibodies—mAb1, mAb2, and mAb3—at the 2 L scale. For each antibody, two lead cell lines were identified that generated material with similar product quality to the material generated from the associated pool. For two antibody molecules, mAb1 and mAb2, the material generated by the lead cell lines from 2 L bioreactors was tested in an accelerated stability study and was shown to have stability comparable to the material generated by the associated pool. Additionally, we used this approach for two antibody molecules, mAb4 and mAb5, at Tox and GMP production. The materials from the Tox batch at 400 L scale and three GMP batches at 2000 L scale have comparable product quality attributes for both molecules. Our results demonstrate the feasibility of using a pool of clonally derived cell lines to generate material of similar product quality and stability for use in IND‐enabling toxicology studies as was derived from the final production clone, which enabled significant acceleration of timelines into clinical development. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1449–1455, 2017     

High-throughput clonal selection of recombinant CHO cells using a dominant selectable and amplifiable metallothionein-GFP fusion protein

Transfected mammalian cells can be used for the production of fully processed recombinant proteins for medical and industrial purposes. However, the isolation of high-producing clones is traditionally time-consuming. Therefore, we developed a high-throughput screening method to reduce the time and effort required to isolate high-producing cells. This involved the construction of an expression vector containing the amplifiable gene metallothionein (MT), fused in-frame to green fluorescent protein (GFP). The fusion gene (MTGFP) confers metal resistance similar to that of the wild-type metallothionein and expression can be monitored using either flow cytometry or a fluorometer to measure green fluorescence. Expression of MTGFP acted as a dominant selectable marker allowing rapid and more efficient selection of clones at defined metal concentrations than with the antibiotic G418. Cells harboring MTGFP responded to increasing metal concentrations with a corresponding increase in fluorescence. There was also a corresponding increase in recombinant protein production, indicating that MTGFP could be used as a selectable and amplifiable gene for the coexpression of foreign genes. Using our expression vector encoding MTGFP, we demonstrate a high-throughput clonal selection protocol for the rapid isolation of high-producing clones from transfected CHO cells. We were able to isolate cell lines reaching specific productivities of >10 microg hGH/10(6) cells/day within 4 weeks of transfection. The advantage of this method is that it can be easily adapted for automated procedures using robotic handling systems.     

Development of a scale-up strategy for Chinese hamster ovary cell culture processes using the kLa ratio as a direct indicator of gas stripping conditions

Herein, we described a scale-up strategy focused on the dissolved carbon dioxide concentration (dCO₂) during fed-batch cultivation of Chinese hamster ovary cells. A fed-batch culture process for a 2000-L scale stainless steel (SS) bioreactor was scaled-up from similarly shaped 200-L scale bioreactors based on power input per unit volume (P/V). However, during the 2000-L fed-batch culture, the dCO₂ was higher compared with the 200-L scale bioreactor. Therefore, we developed an alternative approach by evaluating the k_La values of O₂ (k_La[O₂]) and CO₂ [k_La(CO₂)] in the SS bioreactors as a scale-up factor for dCO₂ reduction. The k_La ratios [k_La(CO₂)/k_La(O₂)] were different between the 200-L and 2000-L bioreactors under the same P/V condition. When the agitation conditions were changed, the k_La ratio of the 2000-L scale bioreactor became similar and the P/V value become smaller compared with those of the 200-L SS bioreactor. The dCO₂ trends in fed-batch cultures performed in 2000-L scale bioreactors under the modified agitation conditions were similar to the control. This k_La ratio method was used for process development in single-use bioreactors (SUBs) with shapes different from those of the SS bioreactor. The k_La ratios for the SUBs were evaluated and conditions that provided k_La ratios similar to the 200-L scale SS bioreactors were determined. The cell culture performance and product quality at the end of the cultivation process were comparable for all tested SUBs. Therefore, we concluded that the k_La ratio is a powerful scale-up factor useful to control dCO₂ during fed-batch cultures.     

Solution phase isoelectric fractionation in the multi-compartment electrolyser: a divide and conquer strategy for the analysis of complex proteomes.

Sample complexity frequently interferes with the analysis of low-abundance proteins by two-dimensional gel electrophoresis (2DGE). Ideally, high abundance proteins should be removed, allowing low-abundance proteins to be applied at much higher concentrations than is possible with the unfractionated sample. One approach is to partition the sample in a manner that segregates the bulk of extraneous proteins from the protein(s) of interest. Solution phase isoelectric focusing in the multi-compartment electrolyser generates fractions of discrete isoelectric point (pI) intervals allowing isolated narrow segments of a proteome to be analysed individually by 2DGE. It is particularly useful for the isolation of low-abundance proteins of extremely basic or acidic pI.     

Development of a validated capillary electrophoresis method for enantiomeric purity control and quality control of levocetirizine in a pharmaceutical formulation

A chiral capillary electrophoresis method has been developed for the quantification of 0.1% of the enantiomeric impurity (dextrocetirizine) in levocetirizine and determination of both in pharmaceuticals using sulfated-β-cyclodextrins (CDs) as chiral selector. Several parameters affecting the separation were studied such as the type and concentration of chiral selectors, buffer composition and pH, organic modifier, mixtures of two CDs in a dual system, voltage, and temperature. The optimal separation conditions were obtained using a 50 mM tetraborate buffer (pH 8.2) containing 1% (w/v) sulfated-β-CDs on a fused-silica capillary. Under these conditions, the resolution of two enantiomers was higher than 3. To validate the method, the stability of the solutions, robustness (two level half fraction factorial design for 5 factors using 19 experiments [2(n-1)+3]), precision, linearity (dextrocetirizine 0.25-2.5 μg/ml, R(2) = 0.9994, y = 0.0375x + 0.0008; levocetirizine 15-100 μg/ml, R(2) = 0.9996, y = 0.0213x + 0.0339), limit of detection (0.075 μg/ml, 0.03% m/m), limit of quantification (0.25 μg/ml, 0.1% m/m), accuracy (dextrocetirizine 84-109%, levocetirizine 97.3-103.1%), filter effect, and different CD batches were examined. The validated method was further applied to bulk drug and tablets of levocetirizine.