Utilization in alginate beads for Cu(II) and Ni(II) adsorption of an exopolysaccharide produced by <Emphasis Type="Italic">Chryseomonas luteola</Emphasis> TEM05

Copper and nickel adsorption onto calcium alginate, sodium alginate with an extracellular polysaccharide (EPS) produced by the activated sludge bacterium Chryseomonas luteola TEM05 and the immobilized C. luteola TEM05 from aqueous solutions were studied. After that, the multi metal ions containing these ions together were prepared and partial competitive adsorptions of these mixtures were also investigated. The metal adsorption of gel beads were carried out at pH 6.0, 25 °C. The maximum adsorption capacities in Langmuir isotherm for calcium alginate, calcium alginate + EPS, calcium alginate + C. luteola TEM05 and calcium alginate + EPS + C. luteola TEM05 were 1.505, 1.989, 1.976, 1.937 mmol/g dry weight for Cu(II) and 0.996, 1.224, 1.078, 1.219 mol/g dry weight for Ni(II), respectively.The competitive biosorption capacities of the carrier for all metal ions were lower than single conditions.     

Chromium and aluminum biosorption on<Emphasis Type="Italic"> Chryseomonas luteola</Emphasis> TEM05

Cr(VI) and Al(III) are environmental pollutants that are frequently encountered together in industrial wastewaters, e.g., from mining iron-steel, metal cleaning, plating, metal processing, automobile parts, and the manufacturing and dye industries. In this work, several variables that affect the capacity for chromium and aluminum biosorption by Chryseomonas luteola TEM05 were studied, particularly the effects of pH, metal concentration and contact time. Optimum adsorption pH values of Cr(VI) and Al(III) were determined as 4.0 and 5.0, respectively. The biosorption equilibrium was described by Freundlich and Langmuir adsorption isotherms. The value of Q ^o appears to be significantly higher for the Al(III) C. luteola TEM05 system. Langmuir parameters of C. luteola TEM05 also indicated a maximum adsorption capacity of 55.2 mg g^–1 for Al(III) and 3.0 mg g^–1 for Cr(VI).     

Utilization of an exopolysaccharide produced by Chryseomonas luteola TEM05 in alginate beads for adsorption of cadmium and cobalt ions

Cadmium and cobalt adsorption from aqueous solution onto calcium alginate, sodium alginate with an extracellular polysaccharide (EPS) produced by the activated sludge bacterium Chryseomonas luteola TEM05 and immobilized C. luteola TEM05 was studied. In addition, solutions containing both of these ions were prepared and partial competitive adsorption of these mixtures was investigated. Metal adsorption onto gel beads was carried out at pH 6.0 and 25 degrees C. The maximum adsorption capacities determined by fitting Langmuir isotherms to the data for calcium alginate, calcium alginate+EPS, calcium alginate + C. luteola TEM05 and calcium alginate + EPS + C. luteola TEM05 were 45.87, 55.25, 49.26, 51.81 mg g(-1) for Co(II) and 52.91, 64.10, 62.5, 61.73 mg g(-1) for Cd(II), respectively. The biosorption capacity of the carrier for both metal ions together in competition was lower than those obtained when each was present alone.     

Enhancement of Lead(II) Biosorption by Microalgal Biomass Immobilized onto Loofa (Luffa cylindrica) Sponge

A unicellular green microalga, Chlorella sorokiniana, was immobilized on loofa (Luffa cylindrica) sponge and successfully used as a new biosorption system for the removal of lead(II) ions from aqueous solutions. The biosorption of lead(II) ions on both free and immobilized biomass of C. sorokiniana was investigated using aqueous solutions in the concentration range of 10–300 mg/L. The biosorption of lead(II) ions by C. sorokiniana biomass increased as the initial concentration of lead(II) ions increased in the medium. The maximum biosorption capacity for free and immobilized biomass of C. sorokiniana was found to be 108.04 and 123.67 mg lead(II)/g biomass, respectively. The biosorption kinetics were found to be fast, with 96 % of adsorption within the first 5 min and equilibrium reached at 15 min. The adsorption of lead(II) both by free and immobilized C. sorokiniana biomass followed the Langmuir isotherm. The biosorption capacities were detected to be dependent on the pH of the solution; and the maximum adsorption was obtained at a solution pH of about 5. The effect of light metal ions on lead(II) uptake was also studied and it was shown that the presence of light metal ions did not significantly affect lead(II) uptake. The loofa sponge‐immobilized C. sorokiniana biomass could be regenerated using 0.1 M HCl, with up to 99 % recovery. The desorbed biomass was used in five biosorption‐desorption cycles, and no noticeable loss in the biosorption capacity was observed. In addition, fixed bed breakthrough curves for lead(II) removal were presented. These studies demonstrated that loofa sponge‐immobilized biomass of C. sorokiniana could be used as an efficient biosorbent for the treatment of lead(II) containing wastewater.     

Thermal Stability of Immobilized Glucoamylase Entrapped in Polyacrylamide Gels and Bound to SP-Sephadex C–50

Glucoamylase[α-1,4: 1,6-glucan-4: 6-glucohydroease, EC 3.2.1.3] from Rhizopus niveus was entrapped in polyacrylamide gels and adsorbed onto SP-Sephadex C–50 to elucidate the thermostability mechanism of immobilized enzymes. The thermal stability of immobilized glucoamylase entrapped in polyacrylamide gels was enhanced slightly compared with glucoamylase in free solution, and was independent of the acrylamide monomer concentration and N, N′-methylene-bis (acrylamide) content. To explain this phenomenon, the cellular structure of polyacrylamide gel was taken into consideration in addition to interactions between glucoamylase and gel, and a decrease in dielectric constant in the gel [S. Moriyama et al., Agric. Biol. Chem., 41, 1985 (1977)¹⁾]. On the other hand, immobilized glucoamylase bound to SP-Sephadex by ionic interaction showed lower stability than free glucoamylase, and much greater stability than glucoamylase in the presence of dextran sulfate, a constituent of SP-Sephadex. Thermal stabilities for the free and immobilized enzymes were also compared at the pH not in the bulk solution, but in the SP-Sephadex.     

Immobilization of blue green microalgae on loofa sponge to biosorb cadmium in repeated shake flask batch and continuous flow fixed bed column reactor system

Summary An indigenous strain of blue green microalga, Synechococcus sp., isolated from wastewater, was immobilized onto loofa sponge discs and investigated as a potential biosorbent for the removal of cadmium from aqueous solutions. Immobilization has enhanced the sorption of cadmium and an increase of biosorption (21%) at equilibrium was noted as compared to free biomass. The kinetics of cadmium biosorption was extremely rapid, with (96%) of adsorption within the first 5 min and equilibrium reached at 15 min. Increasing initial pH or initial cadmium concentration resulted in an increase in cadmium uptake. The maximum biosorption capacity of free and loofa immobilized biomass of Synechococcus sp. was found to be 47.73 and 57.76 mg g⁻¹ biomass respectively. The biosorption equilibrium was well described by Langmuir adsorption isotherm model. The biosorbed cadmium was desorbed by washing the immobilized biomass with dilute HCl (0.1 M) and desorbed biomass was reused in five biosorption–desorption cycles without an apparent decrease in its metal biosorption capacity. The metal removing capacity of loofa immobilized biomass was also tested in a continuous flow fixed-bed column bioreactor and was found to be highly effective in removing cadmium from aqueous solution. The results suggested that the loofa sponge-immobilized biomass of Synechococcus sp. could be used as a biosorbent for an efficient removal of heavy metal ions from aqueous solution.     

Changes in the polyelectrolyte-amphiphile interaction due to helix-coil transition induced by specific counterions or variations in temperature

For the system κ-carrageenan/amitriptyline it is shown that the degree of binding of amitriptyline is closely related to the carrageenan conformation as regulated by the counterions (Na⁺ or K⁺). The adsorption becomes much more pronounced when the carrageenan molecule is in the helix form (counterion K⁺) than when it has a coil conformation (counterion Na⁺). Furthermore, for the helical state the adsorption becomes strongly cooperative. It is also shown experimentally that the release from the adsorbed state has a conversion temperature at about 42°C (helix-coil transition). The effect is also related to the linear charge density. For κ-carrageenan with a higher charge density the adsorption is strong and cooperative both in the presence of Na⁺ and K⁺ ions. © 1996 John Wiley & Sons, Inc.     

The influence of LBG addition to carrageenan on the mechanical stability of the gel and the fermentative activity of immobilized propionic acid bacteria

In the first part of the experiments, the mechanical properties of 1%, 2% and 3% carrageenan and 1%, 2% and 3% carrageenan/locust bean gum (LBG) gels stored in various concentrations of propionic and acetic acids and their mixtures were examined. The stability of these materials was measured by uniaxial compression between two parallel plates using the Instron Universal Testing Machine. A mathematical model explaining the dependence of the destroying force on the storage time was chosen for data analysis. Using this model, the average rate of gel deterioration was calculated. The structural properties of the examined gels were most influenced by the highest concentration of propionic and acetic acids and their mixtures (1% acetic acid and 2% propionic acid). The addition of LBG to carrageenan decreased the gel destroying force and increased its resistance to acids. In the second part of the experiments, the Propionibacterium freudenreichii subsp. shermanii NCFB 1081 and NCFB 566 were immobilized in a living state in 1%, 2% and 3% carrageenan and 1%, 2% and 3% carrageenan/LBG gels. The ammonia consumption, glucose utilization, production of propionic and acetic acids and the biosynthesis of vitamin B₁₂ were examined. An increase in the productivity of propionic acid and a significant decrease in the vitamin B₁₂ produced in the biosynthesis were observed when immobilized cells were used. The immobilization of cells enhanced the productivity of propionic acid by up to 40% compared to free cells. The best results were obtained for the second and third applications of immobilized cells in all concentrations of carrageenan gels and 2% and 3% carrageenan/LBG gels The results showed that carrageenan/LBG is a better support material for the immobilization of propionic acid bacteria than the pure carrageenan.     

Cadmium(II) sorption from water samples by powdered marble wastes

Abstract

A series of batch adsorption experiments were carried out, with the aim of removing cadmium ions from aqueous solutions and water samples using powdered marble wastes (PMW) as an effective inorganic sorbent. PMW is inexpensive, widespread, and may be considered as environmental problem. The main parameters (i.e. solution pH, sorbent and cadmium concentrations, stirring time, and temperature) influencing the sorption process were investigated. The results obtained for sorption of cadmium ions onto PMW are well described by the Freundlich and Langmuir models. The Dubinin-Radushkevick (D–R) isotherm model was applied to describe the nature of the adsorption of the metal ion; it was found that the adsorption process was chemical in nature. The thermodynamic parameters were also calculated from the Gibbs free energy change (ΔG°), enthalpy (AH°) and entropy (ΔS°). These parameters indicated that the adsorption process of cadmium(II) ions on PMW was spontaneous and endothermic in nature. Under the optimum experimental conditions employed the removal of ca ~100% of Cd²⁺ ions was attained. The procedure was successfully applied to removal of the cadmium ions from aqueous and various natural water samples. The adsorption mechanism is discussed.     

Bioremediation Potential of Chlorella: Spectroscopic,Kinetics, and Sem Studies

A dead dried alga, Chlorella sp., was used for the uptake of Cr⁺³, Cr₂O₇ ^?2, Cu⁺², and Ni⁺² from the aqueous solutions of these metal ions. The equilibrium data were fitted using the Langmuir and Freundlich isotherm model and the maximum uptakes for Cr⁺³, Cr₂O₇ ^?2, Ni⁺², and Cu⁺² were 98, 104, 108, and 183 mg/g, respectively. The Freundlich model, in comparison to the Langmuir model, better represented the sorption process. The kinetics of metal ions uptake by Chlorella sp. was best described by a pseudo-second order rate equation. Infrared spectroscopic data were employed to identify the site(s) of bonding in Chlorella sp. A scanning electron microscopic (SEM) study of pure dead Chlorella sp. and the species treated with different metal ions provided an idea of the extent of metal uptake by this species. The dead Chlorella sp took up maximum Cu(II). The size of the cell of the metal-treated Chlorella sp. obtained from SEM data is in agreement with the extent of metal uptake.     

Donnan membrane equilibrium is not directly applicable to distributions of ions and water in gels or cells

Equilibration of ions and water with a charged gel does not follow the simple equations of the classical Gibbs-Donnan membrane equilibrium. Partition of ions between the gel and the external solution show specific effects, which require that activity coefficients are different in the two compartments. Highly hydrated ions, such as Na⁺ and H⁺ are accumulated into the gel water, whereas less highly hydrated ions, such as K⁺ and NH₄⁺ accumulate in the external water. This selectivity is the obverse of that found for gels containing low-density, expanded water. Water in a charged gel equilibrated with solutions of MgCl₂ was found to be more dense than bulk water at the same temperature. It is proposed that gels imbibe water to maximize the entropy of the system. Ions and water then equilibrate under those constraints. The chemical potential of water in the two compartments equalizes by an increase in density in the compartment of higher osmolality (the charged gel) and a decrease in density in the compartment of lower osmolality (the external solution). Electrolytes equilibrate so that macroscopic electroneutrality is conserved, and the chemical potential of an electrolyte is the same in each compartment. Because activity coefficients are different in the two compartments this results in asymmetric distributions of ions.Because real gels usually contain both charged and hydrophobic regions of surface, populations of water molecules of different density coexist even in very small pores. This accounts for the common failure to detect this phenomenon experimentally.     

Lead biosorption by different morphologies of fungus Mucor indicus

Biosorption characteristics of Pb⁺² ions from aqueous solution were investigated using fungus Mucor indicus biomass treated with NaOH. Biosorption was measured as a function of biomass morphology, pH, biomass concentration, contact time, and metal concentration. The morphology of M. indicus biomass was manipulated towards filamentous or yeast-like forms. The highest and lowest biosorption capacities were observed for purely filamentous and yeast-like forms, respectively. Models of Langmuir, Freundlich, Temkin, and Scachard were applied to describe adsorption isotherm and fitted appropriately. Biosorption kinetics was successfully described using Ho’s pseudo-second-order model. Maximum and minimum values of biosorption capacity of Pb²⁺ were 22.1 and 12.1 mg g⁻¹ for purely filamentous and yeast-like morphologies, respectively. Increasing pH resulted in higher biosorption of Pb⁺² ions up to pH 5.5. Biosorption capacity of individual Pb⁺² ions was reduced in the presence of other metal ions in bi- or multi-metal ion experiments. Metal ions adsorption by the biomass could be eluted effectively with HNO₃.     

Biosorption of Cadmium by Live and Dead <Emphasis Type="Italic">Spirulina</Emphasis>: IR Spectroscopic,Kinetics, and SEM Studies

Cadmium is an important environmental pollutant and a potent toxicant to bacteria, algae, and fungi. Mechanisms of Cd⁺² toxicity and resistance are variable, depending on the organism. The present work reports the use of live and dead Spirulina sp. for sorption of Cd⁺². This investigation shows that this biomass takes up substantial amount of Cd⁺² ions. IR spectroscopic study, kinetics models, Langmuir & Freundlich adsorption isotherms, scanning electron microscopic analysis of Spirulina sp., and the Spirulina sp. treated with different metal ions have been employed to understand the sorption mechanism. Infrared spectra of live Spirulina treated with Cd⁺² ions for different lengths of time have been taken to understand the time dependency of metal interaction.     

Gentisate dioxygenase activity in immobilized cell-free extracts prepared from Salmonella typhimurium

Cell-free extracts of Salmonella typhimurium containing gentisate dioxygenase were immobilized by entrapment in carrageenan and polyacrylamide and adsorption to polyester filters. Carrageenan gels were very porous, and the enzyme was slowly inactivated in polyacrylamide. When adsorbed on polyester the enzyme could be lyophilized and reactivated. Batch reactors charged with the immobilized enzyme converted gentisate to maleylpyruvate with yields of 10–90%.     

The influence of pH and chloride on the retention of cadmium,lead, mercury,and zinc by soils

The extent of contamination of soils by toxic heavy metals not only depends on the rate of loading of the metal but also on the nature of the adsorbing surfaces, the degree of alkalinity or acidity of the soil and the presence of aqueous complexant ligands. This work reports on the role of pH on the retention of Cd, Hg, Pb and Zn by two soils and on the influence of the chloride, Cl‐, ion on the chemical speciation and retention of the four metals. Batch adsorption experiments were conducted from pH 3 to 7 in the presence of either 0.1 M LiCl or LiClO₄. The results of the study showed that high concentrations of Cl^‐ ions can greatly decrease the retention of Hg and have an increasingly lesser effect on Cd, Pb and Zn retention. The effect of the Cl^‐ons was directly related to the metal‐Cl formation constants. The results of computer modeling of Cd and Hg retention by goethite and humic acid fractions indicated the relative importance of aqueous vs. surface complexation on metal retention. For organic surfaces, which do not form ternary surface complexes, the presence of aqueous complexant ligands should always decrease the adsorption of the metal. For mineral surfaces, which do form ternary surface complexes, there may be increased or decreased metal retention depending on the formation constant of the aqueous metal‐ligand species, the intrinsic complexation constants for the various binary and ternary complexes of the metal and the concentration of the complexant ligand. Thus for Hg, which forms very strong aqueous species with Cl^‐ ions, reduced adsorption on goethite was predicted in the presence of 0.1 M LiCl, while enhanced adsorption was predicted for Cd and Pb. The results suggest caution in the disposal of Cl‐containing wastes onto metal‐contaminated soils. The deleterious effects of Cl^‐ ion addition would be greatest for soils with relatively high organic matter contents and low contents of hydrous ferric oxides.     

Purification and kinetics of a protease-resistant,neutral, and thermostable phytase from Bacillus subtilis subsp. subtilis JJBS250 ameliorating food nutrition

Abstract

A novel protease-resistant and thermostable phytase from Bacillus subtilis subsp. subtilis JJBS250 was purified 36-fold to homogeneity with a combination of ammonium sulfate precipitation followed by Q-Sepharose and Sephadex G-50 chromatographic techniques. The estimated molecular mass of the purified phytase was 46?kDa by electrophoresis with optimal activity at pH 7.0 and 70?°C. About 19% of original activity was maintained at 80?°C for 10?min. Phytase activity was stimulated in presence of surfactants like Tween-20, Tween-80, and Triton X-100 and metal ions like Ca⁺², K⁺, and Co⁺² and it was inhibited by SDS and Mg⁺², Al⁺², and Fe⁺². Purified enzyme showed specificity to different salts of phytic acid and values of K_m and V_max were 0.293?mM and 11.49 nmoles s^?1, respectively for sodium phytate. The purified enzyme was resistant to proteases (trypsin and pepsin) that resulted in amelioration of food nutrition with simultaneous release of inorganic phosphate, reducing sugars, and soluble protein.     

Glutathione production coupled with an ATP regeneration system

Summary Escherichia coli cells possessing glutathione synthetase and acetate kinase activities were immobilized with carrageenan gel. To enhance the operational stability, immobilized cells were treated with hardening agent, glutaraldehyde in the presence of hexamethylenediamine. The continuous production of glutathione was investigated using the column packed with immobilized Escherichia coli cell preparations. Glutathione was continuously produced by this column in the presence of acetyl phosphate and the half-life of this column was calculated to be 8 days at the flow rate of S.V.=0.1 h^–1 at 37°C.     

Copper removal by immobilized Microcystis aeruginosa in continuous flow columns at different bed heights: study of the adsorption/desorption cycle

Microcystis aeruginosa immobilized in a natural polymer was tested for its potential to remove Cu²⁺ ions from aqueous solution in a continuous, downflow packed columnar reactor. Various parameters like flow rate, bed height and contact time required for maximum removal of test metals by the immobilized Microcystis aeruginosa were optimized. An increase in bed height from 2 to 10 cm resulted in an apparent decrease in biosorption capacity from 8.94 to 5.34 mg g^–1, but more Cu²⁺ solution was purified at the higher bed height. Efficiency of metal recovery from Cu²⁺-loaded biomass and its subsequent regeneration was also determined. Immobilized M. aeruginosa was found to be effective in Cu²⁺ removal from solution for up to 10 cycles of adsorption–desorption and 1 M HCl is very efficient desorbent for regeneration of Microcystis biomass for reuse.     

Biosorption of Cadmium from Aqueous Solution by Shell Dust of the Fresh Water Snail Melanoides tuberculata

ABSTRACT The metal bioadsorption potential of shell dust of the freshwater snail Melanoides tuberculata (MTSD) was evaluated under laboratory conditions using cadmium as a model metal. As bioadsorbent, MTSD exhibited a biosorption capacity of 27.03 mg g^?1 at pH 6, indicating potential to remove cadmium from aqueous solution. The adsorption data fit more to the Langmuir (R² = 0.998) equation than the Freundlich (R² = 0.761) equation at equilibrium condition. The kinetics of biosorption followed the pseudo-second-order model (R² = 0.999) better than the Lagergren model (R² = 0.676), as was evident from the regression analysis. The presence of calcium ions appears to have facilitated ion exchange with cadmium along with the binding of different functional groups, as revealed through Fourier transform infrared (FT-IR) analysis. It is apparent from these observations that MTSD can act as low-cost and efficient bioadsorbent for cadmium bioremediation from aquatic habitats. Use of the shells of M. tuberculata for metal biosorption will promote the utility of a waste material of biological origin for bioremediation of heavy metals such as cadmium.