Studies of the Heterogeneity of a Candida cylindracea (rugosa) Lipase: Monitoring of Esterolytic Activity and Enantioselectivity by Chiral Liquid Chromatography

A method for the determination of lipase activity in terms of rate and enantioselectivity of hydrolysis of a chiral ester substrate has been developed. When this method was applied to fractions, isolated from preparative, column chromatographic separations (anion-exchange, molecular sieve) of the lipase, significant differences in enantioselectivity (E) was found between the fractions. The highest enantioselectivity was found in the first main peak obtained on DEAE-Sepharose chromatography, meaning that the enzyme with the highest isoelectric point shows the highest esterolytic enantioselectivity.

The experimental results are discussed in the light of some earlier reported results and with respect to the possible existence of subunit aggregates and isoenzymes.     

Effects of Alcohol and Buffer Treatments on the Activity and Enantioselectivity of Candida rugosa Lipase

Abstract

Several treatments were employed on Candida rugosa lipase (CRL) to improve its biocatalytic performance. Besides conventional alcohol treatment conditions, the effects of pH of the buffer solution used in the treatment as well as the changes in stirring, dialysis, and centrifugation steps of the treatment procedure were investigated for the first time for the resolution of racemic naproxen methyl ester. The highest enantioselectivity and conversion in S-naproxen production were achieved by CRL treated with pH 7.5 buffer solution. The elimination of the centrifugation step resulted in an increase in the enantioselectivity, whereas alcohol treatment of CRL was found to be inconvenient for S-naproxen production. Higher activity for p-nitrophenyl acetate was achieved when 20% butanol and pH 4 buffer solution were used, and when dialysis and stirring times were shortened.     

Evaluation of Medium Components by Plackett-Burman Statistical Design for Lipase Production by Candida rugosa and Kinetic Modeling

Lipase production by Candida rugosa was carried out in submerged fermentation. Plackett-Burman statistical experimental design was applied to evaluate the fermentation medium components. The effect of twelve medium components was studied in sixteen experimental trials. Glucose, olive oil, peptone and FeCl3?6H2O were found to have more significance on lipase production by Candida rugosa. Maximum lipase activity of 3.8 u mL-1 was obtained at 50 h of fermentation period. The fermentation was carried out at optimized temperature of 30oC, initial pH of 6.8 and shaking speed of 120 r/min. Unstructured kinetic models were used to simulate the experimental data. Logistic model, Luedeking-Piret model and modified Luedeking-Piret model were found suitable to efficiently predict the cell mass, lipase production and glucose consumption respectively with high determination coefficient(R2). From the estimated values of the Luedeking-Piret kinetic model parameters, α and β, it was found that the lipase production by Candida rugosa is growth associated.     

Evaluation of Medium Components by Plackett-Burman Statistical Design for Lipase Production by Candida rugosa and Kinetic Modeling

Lipase production by Candida rugosa was carried out in submerged fermentation. Plackett-Burman statistical experimental design was applied to evaluate the fermentation medium components. The effect of twelve medium components was studied in sixteen experimental trials. Glucose, olive oil, peptone and FeCl3?6H2O were found to have more significance on lipase production by Candida rugosa. Maximum lipase activity of 3.8 u mL-1 was obtained at 50 h of fermentation period. The fermentation was carried out at optimized temperature of 30oC, initial pH of 6.8 and shaking speed of 120 r/min. Unstructured kinetic models were used to simulate the experimental data. Logistic model, Luedeking-Piret model and modified Luedeking-Piret model were found suitable to efficiently predict the cell mass, lipase production and glucose consumption respectively with high determination coefficient(R2). From the estimated values of the Luedeking-Piret kinetic model parameters, α and β, it was found that the lipase production by Candida rugosa is growth associated.     

Esterification of 2-methylalkanoic acids Catalysed by Lipase from Candida rugosa: Enantioselectivity as a Function of water Activity and Alcohol Chain Length

Esterifications catalysed by immobilised lipase from Candida rugosa (CRL) in cyclohexane at constant water activity (a_w = 0.76) were studied using 2-methyl substituted octa-, nona- or decanoic acids and n-alcohols of varying chain length as substrates. The importance of controlling the water activity and choosing the right alcohol for obtaining maximum enantioselectivity is demonstrated. The immobilised lipase was easily recovered without loss of activity and enantioselectivity.     

Esterification of 2-methylalkanoic acids Catalysed by Lipase from Candida rugosa: Enantioselectivity as a Function of water Activity and Alcohol Chain Length

Esterifications catalysed by immobilised lipase from Candida rugosa (CRL) in cyclohexane at constant water activity (a_w = 0.76) were studied using 2-methyl substituted octa-, nona- or decanoic acids and n-alcohols of varying chain length as substrates. The importance of controlling the water activity and choosing the right alcohol for obtaining maximum enantioselectivity is demonstrated. The immobilised lipase was easily recovered without loss of activity and enantioselectivity.     

Activity and enantioselectivity of wildtype and lid mutated Candida rugosa lipase isoform 1 in organic solvents

The activity and enantioselectivity of lipase 1 from Candida rugosa and of a chimera enzyme obtained by replacing the lid of isoform 1 with the lid of isoform 3 were compared in organic solvents. The alcoholysis of chloro ethyl 2-hydroxy hexanoate with methanol and of vinyl acetate with 6-methyl-5-hepten-2-ol were used as model reactions in different reaction conditions. The chimera enzyme was less active and enantioselective than the wildtype in all the conditions tested. A rationale for such decreases could be that the chimera lipase has a lower proportion of enzyme molecules in the open form. This might lead to a hindered access to the enzyme active site, thus affecting the catalytic activity.     

Sequence of the lid affects activity and specificity of Candida rugosa lipase isoenzymes

The fungus Candida rugosa produces multiple lipase isoenzymes (CRLs) with distinct differences in substrate specificity, in particular with regard to selectivity toward the fatty acyl chain length. Moreover, isoform CRL3 displays high activity towards cholesterol esters. Lipase isoenzymes share over 80% sequence identity but diverge in the sequence of the lid, a mobile loop that modulates access to the active site. In the active enzyme conformation, the open lid participates in the substrate-binding site and contributes to substrate recognition. To address the role of the lid in CRL activity and specificity, we substituted the lid sequences from isoenzymes CRL3 and CRL4 in recombinant rCRL1, thus obtaining enzymes differing only in this stretch of residues. Swapping the CRL3 lid was sufficient to confer to CRL1 cholesterol esterase activity. On the other hand, a specific shift in the chain-length specificity was not observed. Chimeric proteins displayed different sensitivity to detergents in the reaction medium.     

Enhanced conjugation of Candida rugosa lipase onto multiwalled carbon nanotubes using reverse micelles as attachment medium and application in nonaqueous biocatalysis

Three liquid phases (viz. aqueous, nonaqueous, and reverse micelles) were scrutinized as medium for attachment of the enzyme Candida rugosa lipase (CRL) onto multiwalled carbon nanotubes (CNTs). The nanotubes were functionalized to attain carboxyl and amino groups on their surfaces before enzyme conjugation. Transmission electron microscopy and Fourier transformation infrared spectroscopic studies were used for characterization of the nanotubes during the course of functionalization. High enzyme loadings associated with the functionalized CNTs were observed when reverse micelles were used as the attachment medium. In addition, high activity in terms of ester synthesis in organic solvents was also observed while using those preparations. The nanobioconjugates prepared using reverse micelles were found to be highly sturdy and exhibited appreciable operational stability of around 95 ± 3% at 20th cycle (in case of carboxylated nanotubes) and 90 ± 5% at 10th cycle (in case of aminated nanotubes) for esterification. This shows the potential application of reverse micelles as the attachment medium for surface active enzymes such as CRL onto CNTs. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:828–836, 2014     

Analysis of the Conformational Stability and Activity of Candida antarctica Lipase B in Organic Solvents: INSIGHT FROM MOLECULAR DYNAMICS AND QUANTUM MECHANICS/SIMULATIONS*

The conformational stability and activity of Candida antarctica lipase B (CALB) in the polar and nonpolar organic solvents were investigated by molecular dynamics and quantum mechanics/molecular mechanics simulations. The conformation change of CALB in the polar and nonpolar solvents was examined in two aspects: the overall conformation change of CALB and the conformation change of the active site. The simulation results show that the overall conformation of CALB is stable in the organic solvents. In the nonpolar solvents, the conformation of the active site keeps stable, whereas in the polar solvents, the solvent molecules reach into the active site and interact intensively with the active site. This interaction destroys the hydrogen bonding between Ser¹⁰⁵ and His²²⁴. In the solvents, the activation energy of CALB and that of the active site region were further simulated by quantum mechanics/molecular mechanics simulation. The results indicate that the conformation change in the region of active sites is the main factor that influences the activity of CALB.     

Enantioselectivity of Candida rugosa lipases (Lip1, Lip3, and Lip4) towards 2-bromo phenylacetic acid octyl esters controlled by a single amino acid

Enantiomer discrimination by enzymes is a very accurate mechanism, which often involves few amino acids located at the active site. Lipase isoforms from Candida rugosa are very good enzymatic models to study this phenomenon as they display high sequence homology (>80%) and their enantioselectivity is often pointed out. In the present work, we investigated three lipases from C. rugosa (Lip1, Lip3, and Lip4, respectively) towards the resolution of 2-bromo-arylacetic acid esters, an important class of chemical intermediates in the pharmaceutical industry. All exhibited a high enantioselectivity, with Lip4 preferring the R-enantiomer (E-value = 15), while Lip1 and Lip3 showed an S-enantioselectivity >200. A combination of sequence and structure analysis of the three C. rugosa lipases suggested that position 296 could play a role in S- or R-enantiomer preference of C. rugosa lipases. This led to the construction by site-directed mutagenesis of Lip1 and Lip4 variants in which position 296 was, respectively, exchanged by a Gly, Ala, Leu, or Phe amino acid. Screening of these variants for their enantioselectivity toward 2-bromo phenyl acetic acid octyl esters revealed that steric hindrance of the amino acid residue introduced at position 296 controls both the enantiopreference and the enantioselectivity value of the lipase: bulkier is the amino acid at position 296, larger is the selectivity towards the S-enantiomer. To investigate further these observations at an atomic level, we carried out a preliminary modeling study of the tetrahedral intermediates formed by Lip1 and Lip4 with the (R, S)-2-bromo-phenylacetic acid octyl ester enantiomers that provides some insight regarding the determinants responsible for lipase enantiodiscrimination.     

Design, total synthesis, and functional overexpression of the Candida rugosa lip1 gene coding for a major industrial lipase.

The dimorphic yeast Candida rugosa has an unusual codon usage that hampers the functional expression of genes derived from this yeast in a conventional heterologous host. Commercial samples of C. rugosa lipase (CRL) are widely used in industry, but contain several different isoforms encoded by the lip gene family, among which the isoform encoded by the gene lip1 is the most prominent. In a first laborious attempt, the lip1 gene was systematically modified by site-directed mutagenesis to gain functional expression in Saccharomyces cerevisiae. As alternative approach, the gene (1647 bp) was completely synthesized with an optimized nucleotide sequence in terms of heterologous expression in yeast and simplified genetic manipulation. The synthetic gene was functionally expressed in both hosts S. cerevisiae and Pichia pastoris, and the effect of heterologous leader sequences on expression and secretion was investigated. In particular, using P. pastoris cells, the synthetic gene was functionally overexpressed, allowing for the first time to produce recombinant Lipl of high purity at a level of 150 U/mL culture medium. The physicochemical and catalytic properties of the recombinant lipase were compared with those of a commercial, nonrecombinant C. rugosa lipase preparation containing lipase isoforms.     

Studies on the Stability of Lipase from Candida Cylindracea, Free and Incorporated in Polymerisable Zwitterionic Surfactant Vesicles

Lipase from Candida cylindracea (CCL) was incorporated into vesicles of a polymerisable zwitterionic surfactant: bis[2-(pentacosa-10,12-diynoyloxy)ethyl]-2-aminoethanesulfonic acid (BPAS). Vesicle systems of BPAS were characterised in terms of morphology (Electron Microscopy) and stability. Polymerisation of BPAS vesicles did not alter the morphology and polymeric vesicles were considerably more stable than the monomeric analogues. CCL was incorporated into the vesicle membrane by spontaneous insertion. The enzyme remained fully active after incorporation into the vesicle bilayer; especially in homogeneous assay mixtures the vesicle incorporated enzyme showed an increased activity when compared to the free lipase. The stability of free and incorporated lipase was determined by measuring the residual activity of the various systems when mixed with ethanol (50% v/v) or 2-(n-butoxy)ethanol (37.5% v/v), at 50°C and 60°C and in the presence of the proteolytic enzyme trypsin. In all cases the vesicle incorporated enzyme showed an increased stability against the denaturating conditions.     

从植物根际定向批量筛选广谱有机溶剂耐受性脂肪酶产生菌

洋葱伯克霍尔德菌脂肪酶是一类具有重要工业应用价值的优良脂肪酶之一。根据已公布的洋葱伯克霍尔德菌基因组信息, 在传统的洋葱伯克霍尔德菌选择性培养基中添加适量的氨苄青霉素和卡那霉素, 从植物根际的土壤中筛选洋葱伯克霍尔德菌。对获得的单菌落再用含罗丹明B指示剂的产脂肪酶定性检测平板检测, 从4个根际土壤中筛选到35株产脂肪酶的洋葱伯克霍尔德菌, 阳性率达到65%。其中15株对体积浓度为10%的苯、己烷和正庚烷同时具有耐受性。用recA基因分子鉴定上述15株菌种, 全部属于洋葱伯克霍尔德菌菌群。