Cellulase from Bacillus licheniformis and Brucella sp. isolated from mangrove soils of Mahanadi river delta,Odisha, India

In the present study, two cellulose-degrading bacteria (CDB-5 and CDB-12) were isolated from mangrove soils of Mahanadi river delta, based on halo zone formation in Congo red agar medium and evaluation for cellulase production in CMC broth medium. Based on morphological, biochemical and 16S rRNA gene sequencing, the two strains, CDB-5 and CDB-12, were identified as Brucella sp. and Bacillus licheniformis, respectively. The gene bank accession number of the strains CDB-5 and CDB-12 are KR632646 and KR632645, respectively. The strain Brucella sp. and B. licheniformis showed an enzyme activity of 96.37?U/ml and 98.25?U/ml, respectively, after 72?h of incubation period. Enzyme production was optimized under different growth conditions such as pH, temperature, agitation rate, carbon source, sodium chloride (NaCl), and nitrogen sources. Maximum cellulase production by both the strains was obtained in the same parameter condition such as pH (7.0), rpm (150), and NaCl (2%, w/v) which varies for other parameters. The strain, CDB-5, produced maximum cellulase at 35?°C temperature, maltose as a carbon source, and yeast extract as a nitrogen source where as the strain CDB-12 produces maximum cellulase at 45?°C temperature, carboxyl methyl cellulose (CMC) as carbon source and trypton as a nitrogen source. The bacterial crude enzyme was purified by ammonium sulfate precipitation followed by overnight dialysis. SDS-PAGE analysis of the partially purified cellulase enzyme exhibited band sizes of approximately 55 and 72?kDa.     

Cyanophycin production from feather hydrolysate using biotechnological methods

Abstract

Cyanophycin is a bacterial storage polymer for carbon, nitrogen and energy with emerging industrial applications. As efficient cyanophycin production is enhanced by peptone, but commercial peptones are very expensive, thereby increasing the overall production cost, an enzymatically produced feather hydrolysate (FH) is assessed as a cheap replacement of peptone to lower the costs and make cyanophycin production more economically feasible. Keratinase production using feather as the sole carbon/nitrogen source by S.pactum 40530 at 30-L fermentation scale was achieved within 93?h with degradation rate of 96.5%. A concentration of 60?g/L of FH, generated by keratinolytic activity (8?×?10³?U?g^?1L^?1d^?1) within 24?h, was used as the main carbon/peptone source to produce cyanophycin. The growth performances of E. coli DapE/L using FH was compared to that of casamino acids (CA) and up to 7.1?±?0.4 and 5.3?±?0.3?g/L of cell mass were obtained after 72?h from FH and CA, respectively. Cyanophycin production yielded 1.4?±?0.1g/L for FH with average molecular mass of 28.8 and 1.4?±?0.2 for CA with average molecular mass of 35.3, after 60?h. For the first time, FH generated by biotechnological methods from environmentally problematic, abundant and renewable feather bioresource was successfully used for cyanophycin biopolymer production.     

Production of extracellular cellulase byLunulospora curvula andFlagellospora penicillioides

Studies on the production of extracellular cellulase in two aquatic hyphomycetesLunulospora curvula andFlagellospora penicillioides have shown that several factors such as carbon source, nitrogen source, pH and temperature affect the production of the enzyme. Experiments have shown that carboxymethyl cellulose is the best source of carbon, and ammonium sulfate is the best source of nitrogen for the production of the enzyme. An optimum pH of 5.2 and a temperature of 28°C was found to favor maximum enzyme activity in 12-d-old cultures. Glucose and sucrose were found to suppress the activity of the enzyme in both organisms.     

Diesel Biodegradation Capacities and Biosurfactant Production in Saline-Alkaline Conditions by Delftia sp NL1, Isolated from an Algerian Oilfield

Abstract

In this study, a diesel oil-degrading bacterium was isolated from an oilfield water injection (water-bearing formations, 1,205?m depth) in Algeria. The bacterial strain, designated NL1, was cultivated on diesel oil as sole carbon and energy sources. Molecular analyses of the 16S rRNA gene sequence (KY397882) placed NL1 strain closely related to distinct cultivated species of the Delftia genus. Optimal diesel oil biodegradation by Delftia sp NL1 strain occurred at pH 11, 40?°C, 2?M NaCl and initial hydrocarbon concentration of 5% (v/v) as sole carbon source. GC-MS analyses evidenced that strain Delftia sp NL1 was able to degrade more than 66.76% of diesel oil within only 7?days. On the other hand, and in the same conditions, biosurfactant production by Delftia sp NL1 was also evaluated evidencing high emulsifying capacity (E₂₄ = 81%), ability to lower the surface tension of growing media (with the value of 25.7?mN m^?1), and production of glycolipids (8.7?g L^?1) as biosurfactants. This research presents indigenous strain Delftia sp NL1 for diesel degradation and synthesis of biosurfactant in extreme conditions. In this sense, strain NL1 is a good candidate for possible in situ oil recovery and in wastewater treatment in refineries and oil terminals in petroleum industry.     

Cellulose synthesis by Komagataeibacter rhaeticus strain P 1463 isolated from Kombucha

Isolate B17 from Kombucha was estimated to be an efficient producer of bacterial cellulose (BC). The isolate was deposited under the number P 1463 and identified as Komagataeibacter rhaeticus by comparing a generated amplified fragment length polymorphism (AFLP™) DNA fingerprint against a reference database. Static cultivation of the K. rhaeticus strain P 1463 in Hestrin and Schramm (HS) medium resulted in 4.40 ± 0.22 g/L BC being produced, corresponding to a BC yield from glucose of 25.30 ± 1.78 %, when the inoculum was made with a modified HS medium containing 10 g/L glucose. Fermentations for 5 days using media containing apple juice with analogous carbon source concentrations resulted in 4.77 ± 0.24 g/L BC being synthesised, corresponding to a yield from the consumed sugars (glucose, fructose and sucrose) of 37.00 ± 2.61 %. The capacity of K. rhaeticus strain P 1463 to synthesise BC was found to be much higher than that of two reference strains for cellulose production, Komagataeibacter xylinus DSM 46604 and Komagataeibacter hansenii DSM 5602^T, and was also considerably higher than that of K. hansenii strain B22, isolated from another Kombucha sample. The BC synthesised by K. rhaeticus strain P 1463 after 40 days of cultivation in HS medium with additional glucose supplemented to the cell culture during cultivation was shown to have a degree of polymerization of 3300.0 ± 122.1 glucose units, a tensile strength of 65.50 ± 3.27 MPa and a length at break of 16.50 ± 0.83 km. For the other strains, these properties did not exceed 25.60 ± 1.28 MPa and 15.20 ± 0.76 km.

     

Efficient bioconversion from acid hydrolysate of waste oleaginous yeast biomass after microbial oil extraction to bacterial cellulose by Komagataeibacter xylinus

Biomass acid hydrolysate of oleaginous yeast Trichosporon cutaneum after microbial oil extraction was applied as substrate for bacterial cellulose (BC) production by Komagataeibacter xylinus (also named as Gluconacetobacter xylinus previously) for the first time. BC was synthesized in static culture for 10 days, and the maximum BC yield (2.9?g/L) was got at the 4th day of fermentation. Most carbon sources in the substrate (glucose, mannose, formic acid, acetic acid) can be utilized by K. xylinus. The highest chemical oxygen demand (COD) removal (40.7?±?3.0%) was obtained at the 6th day of fermentation, and then the COD increased possibly due to the degradation of BC. The highest BC yield on COD consumption was 38.7?±?4.0% (w/w), suggesting that this is one efficient bioconversion for BC production. The BC structure was affected little by the substrate by comparison with that generated in classical HS medium using field-emission scanning electron microscope (FE-SEM), Fourier transform infrared, and X-ray diffraction. Overall, this technology can both solve the issue of waste oleaginous yeast biomass and produce valuable biopolymer (BC).     

Isolation of a novel lipase producing fungal isolate Aspergillus fumigatus and production optimization of enzyme

Abstract

Fungal lipases occupy a place of prominence among biocatalysts owing to their novel, multifold applications and resistance to high temperature and other operational conditions. In the present study, Aspergillus fumigatus isolated from oil-contaminated soil produced good amount of lipase activity with galactose (1%) as carbon source and peptone (0.1%) as nitrogen source after 72?h of incubation in the production medium at 45?°C and pH 10.0. The isolated enzyme was found to give its optimum reaction temperature at 40?°C and pH 9.0 with the substrate used as p-nitrophenyl benzoate. The activity of lipase was inhibited by the presence of metal ions. A 6.68-fold increase for lipase production was obtained by one variable at a time. Based on the findings of present study, lipase of A. fumigatus is a potential lipase and a candidate for industrial applications such as bioremediation, detergent, leather and pharmaceutical industries.     

Production,optimization, purification,characterization, and anti-cancer application of extracellular L-glutaminase produced from the marine bacterial isolate

Abstract

L-glutaminase from bacterial sources has been proven to be effective and economical agents in cancer therapy, food industry and high-value chemicals like threonine. In the present study, a newly isolated bacterial strain was potentially producing extracellular L-glutaminase, it identified as Bacillus subtilis OHEM11 (MK389501) using the 16S rRNA gene. L-glutaminase production optimized and the optimum factors for production under submerged fermentation were at pH 6.5–7.0 and 35?°C after 28?hr using rhamnose and glutamine as carbon and nitrogen sources, respectively, while bagasse was the best inducer for the production under solid-state fermentation. Ethanol precipitation and ion-exchange chromatography using QFF are the purification steps. L-glutaminase was purified to 2-fold with specific activity 89.78?U/mg and its molecular weight about 54.8?kDa with the alkaline property of the enzyme makes it clear having carcinostatic property; maximum enzyme activity at pH 8.2 and 40?°C and retained about 90% activity for 1?hr. The cytotoxicity effect of L-glutaminase indicated a significant safety on Vero cells with high anticancer activity against NFS-60, HepG-2, and MCF-7 cancer cell lines. The outcomes demonstrated that L-glutaminase could be applied in many biotechnological applications such as pharmaceutical and food processing.     

Biodegradation of trinitrotoluene (TNT) by indigenous microorganisms from TNT-contaminated soil,and their application in TNT bioremediation

Soil and groundwater contaminated by munitions compounds is a crucial issue in environmental protection. Trinitrotoluene (TNT) is highly toxic and carcinogenic; therefore, the control and remediation of TNT contamination is a critical environmental issue. In this study, the authors characterized the indigenous microbial isolates from a TNT-contaminated site and evaluated their activity in TNT biodegradation. The bacteria Achromobacter sp. BC09 and Citrobacter sp. YC4 isolated from TNT-contaminated soil by enrichment culture with TNT as the sole carbon and nitrogen source (strain BC09) and as the sole nitrogen but not carbon source (strain YC4) were studied for their use in TNT bioremediation. The efficacy of degradation of TNT by indigenous microorganisms in contaminated soil without any modification was insufficient in the laboratory-scale pilot experiments. The addition of strains BC09 and YC4 to the contaminated soil did not significantly accelerate the degradation rate. However, the addition of an additional carbon source (e.g., 0.25% sucrose) could significantly increase the bioremediation efficiency (ca. decrease of 200 ppm for 10 days). Overall, the results suggested that biostimulation was more efficient as compared with bioaugmentation. Nevertheless, the combination of biostimulation and bioaugmentation using these indigenous isolates is still a feasible approach for the development of bioremediation of TNT pollution.     

Behavior of Freezable Bound Water in the Bacterial Cellulose Produced by Acetobacter xylinum: An Approach Using Thermoporosimetry

The aim of the study is to examine thermal behavior of water within reticulated structure of bacterial cellulose (BC) films by sub-ambient differential scanning calorimetry (DSC). BC films with different carbon source, either manitol (BC (a)) or glycerol (BC (b)), were produced by Acetobacter xylinum using Hestrin and Shramm culture medium under static condition at 30 ± 0.2°C for 3 days. BC samples were characterized by electron scanning microscopy and X-ray diffraction spectroscopy. The pore analysis was done by B.H.J. nitrogen adsorption. The pre-treated with 100% relative humidity, at 30.0 ± 0.2°C for 7 days samples were subjected to a between 25 and −150°C-cooling–heating cycle of DSC at 5.00°C/min rate. The pre-treated samples were also hydrated by adding 1 μl of water and thermally run with identical conditions. It is observed that cellulose fibrils of BC (a) were thinner and reticulated to form slightly smaller porosity than those of BC (b). They exhibited slightly but non-significantly different crystalline features. The freezable bound water behaved as a water confinement within pores rather than a solvent of polymer which is possible to use thermoporosimetry based on Gibb–Thomson equation to approach pore structure of BC. In comparison with nitrogen adsorption, it was found that thermoporosimetry underestimated the BC porosity, i.e., the mean diameters of 23.0 nm vs. 27.8 nm and 27.9 nm vs. 33.9 nm for BC (a) and BC (b), respectively, by thermoporosimetry vs. B.H.J. nitrogen adsorption. It may be due to large non-freezable water fraction interacting with cellulose, and the validity of pore range based on thermodynamic assumptions of Gibb–Thomson theory.     

Simple fed-batch cultivation strategy for the enhanced production of a single-sugar glucuronic acid-based oligosaccharides by a cellulose-producing <Emphasis Type="Italic">Gluconacetobacter hansenii</Emphasis> strain

The production of water-soluble single-sugar glucuronic acid-based oligosaccharides (WSOS) by a cellulose producing strain Gluconacetobacter hansenii PJK was studied in a periodically recycled and fed-batch cultivations using glucose/ethanol or glucose only. Fermentations were carried out in a 2 L jar fermenter equipped with a turbine impeller with 6 flat blades. WSOS were produced constantly but the bacterial cellulose (BC) production stopped at 48 h of cultivation in a periodically recycled culture using the exhausted medium supplemented with glucose and ethanol. Tremendous quantities of WSOS were obtained in fed-batch cultivations using glucose/ethanol (35.6 g/L at 132 h of cultivation) or glucose only (86 g/L after 240 h of cultivation) as the nutritional source. However, the BC production yield under these nutritional conditions decreased significantly in comparison to previous studies about the BC production by the same strain. The overall results revealed that G. hansenii is capable of producing enormous quantities of WSOS compared to those reported previously for compounds of a related chemical nature. Moreover, the WSOS production was found to be dependent on the pH of the culture broth.     

Aerobic degradation of pyridine by a new bacterial strain, <Emphasis Type="Italic">Shinella zoogloeoides</Emphasis> BC026

A new bacterial strain, Shinella zoogloeoides BC026, which utilizes pyridine as its sole carbon, nitrogen and energy source, was isolated from the activated sludge of a coking wastewater treatment plant. The BC026 strain completely degraded up to 1,806 mg/l of pyridine in 45.5 h. The optimum degradation conditions were pH 8.0 and temperature 30–35°C. According to product monitoring and genetic analysis, the pyridine ring was cleaved between C₂ and N, resulting in 58% of pyridine-N being directly converted into ammonium. Providing glucose as the extra carbon source, the degradation of pyridine was not affected, while the growth of the strain was promoted, and 41% of pyridine-N was converted into ammonium with a C/N ratio of 35. The ammonium was utilized rapidly by the strain, and a portion of it was transformed into nitrate, then to nitrite, and finally to dinitrogen if enough extra carbon was provided. Considering these characteristics, this strain may accomplish heterotrophic nitrification and aerobic denitrification simultaneously.     

一株兼具秸秆腐解能力玉米促生菌的筛选、鉴定及发酵优化

【背景】砂姜黑土地区存在秸秆腐解缓慢、秸秆还田后作物幼苗生长不良等问题。【目的】从砂姜黑土区农田筛选一株兼具秸秆腐解能力的玉米促生菌MC29,以促进秸秆腐解和玉米作物生长。【方法】通过16S rRNA基因序列分析对该菌株进行鉴定;采用液态摇瓶及盆栽试验验证菌株实际促腐、促生能力及土壤养分的提升效果,并且探究菌株的最佳生长及产吲哚乙酸(indole-3-acetic acid, IAA)条件;采用电击转化法将绿色荧光蛋白(green fluorescent protein, GFP)基因导入菌株细胞,并通过PCR琼脂糖凝胶电泳进行验证。【结果】分离筛选的玉米促生菌鉴定为纤维化纤维微细菌(Cellulosimicrobium cellulans)。该菌株MC29羧甲基纤维素(carboxymethyl cellulose, CMC)酶活可达13.32 U/mL,产IAA量为8.63 mg/L。与对照相比,施用菌株MC29后秸秆腐解率显著提高24.8%;玉米soil and plant analyzer development (SPAD)值、植株总重、根表面积和根长分别提高7.6%、21.3%、30.9%和18.3%;土壤碱解氮含量显著提高68.1%,土壤速效磷及土壤速效钾含量分别提高5.8%及6.0%。菌株MC29最佳生长条件为pH 7.0、装液量为25/250 mL、碳源为麦芽糖、氮源为酵母粉;最佳产IAA条件为pH 7.0、装液量为50/250 mL、碳源为果糖、氮源为硝酸钾;成功构建荧光标记菌株MC29-GFP,并据此追踪到其接入砂姜黑土15 d后定殖量为2.8×10⁵-9.5×10⁵ copies/g。【结论】所筛选的纤维化纤维微细菌MC29对于指导砂姜黑土区多功能秸秆促腐菌剂、微生物菌肥的研制及提升作物产量有一定的积极意义,并为探究其在砂姜黑土中的实际应用奠定基础。     

Optimization and characterization of pullulan production by a newly isolated high-yielding strain Aureobasidium melanogenum

Abstract

Pullulan is an extracellular water-soluble polysaccharide with wide applications. In this study, we screened strains that could selectively produce high molecular weight pullulan for application in industrial pullulan production. A new fungus strain A4 was isolated from soil and identified as Aureobasidium melanogenum based on colony characteristics, morphology, and internally transcribed spacer analysis. Thin-layer chromatography, Fourier-transform infrared spectroscopy, and nuclear magnetic resonance analysis suggested that the dominant exopolysaccharide produced by this strain, which presented a molecular weight of 1.384?×?10⁶ Dalton in in-gel permeation chromatography, was pullulan. The culture conditions for A. melanogenum A4 were optimized at 30?°C and 180?rpm: carbon source, 50?g/L maltose; initial pH 7; and 8?g/L Tween 80. Subsequently, batch fermentation was performed under the optimized conditions in a 5-L stirred-tank fermentor with a working volume of 3?L. The fermentation broth contained 303?g/L maltose, which produced 122.34?g/L pullulan with an average productivity of 1.0195?g/L/h and 82.32?g/L dry biomass within 120?h. The conversion efficiency of maltose to pullulan (Y%) and specific production rate (g/h/g dry cells) (Qs) reached 40.3% and 0.0251?g/L/g dry cells, respectively. The results showed strain A4 could be a good candidate for industrial production.     

Studies on quantitative physiology of Trichoderma reesei with two-stage continuous culture for cellulose production

By employing a two-stage continuous-culture system, some of the more important physiological parameters involved in cellulose biosynthesis have been evaluated with an ultimate objective of designing an optimally controlled cellulose process. The two-stage continuous-culture system was run for a period of 1350 hr with Trichoderma reesei strain MCG-77. The temperature and pH were controlled at 32°C and pH 4.5 for the first stage (growth) and 28°C and pH 3.5 for the second stage (enzyme production). Lactose was the only carbon source for the both stages. The ratio of specific uptake rate of carbon to that of nitrogen, Q(C)/Q(N), that supported good cell growth ranged from 11 to 15, and the ratio for maximum specific enzyme productivity ranged from 5 to 13. The maintenance coefficients determined for oxygen, M_O, and for carbon source, M_C, are 0.85 mmol O₂/g biomass/hr and 0.14 mmol hexose/g biomass/hr, respectively. The yield constants determined are: Y_X/O = 32.3 g biomass/mol O₂, Y_X/C = 1.1 g biomass/g C or Y_X/C = 0.44 g biomass/g hexose, Y_X/N = 12.5 g biomass/g nitrogen for the cell growth stage, and Y_X/N = 16.6 g biomass/g nitrogen for the enzyme production stage. Enzyme was produced only in the second stage. Volumetric and specific enzyme productivities obtained were 90 IU/liter/hr and 8 IU/g biomass/hr, respectively. The maximum specific enzyme productivity observed was 14.8 IU/g biomass/hr. The optimal dilution rate in the second stage that corresponded to the maximum enzyme productivity was 0.026 ～ 0.028 hr^?1, and the specific growth rate in the second stage that supported maximum specific enzyme productivity was equal to or slightly less than zero.     

Factors affecting the yield and properties of bacterial cellulose

Acetobacter xylinum E₂₅ has been applied in our studies in order to find optimal culture conditions for effective bacterial cellulose (BC) production. The strain displays significantly higher stability in BC production under stationary culture conditions. In contrast, intensive agitation and aeration appear to drastically reduce cellulose synthesis since such conditions induced formation of spontaneous cellulose nonproducing mutants (Cel−), which dominated in the culture. Mutation frequency strictly depends on the medium composition in agitated cultures. Enrichment of the standard SH and Yamanaka media with 1% ethanol significantly enhanced BC production in stationary cultures. Horizontal fermentors equipped with rotating discs or rollers were successfully applied in order to improve culture conditions. Relatively slow rotation velocity (4 rpm) and large surface area enabling effective cell attachment are optimal parameters for cellulose production. Physical properties of BC samples synthesized either in stationary cultures or in a horizontal fermentor revealed that cellulose from stationary cultures demonstrated a much higher value of Young's modulus, but a much lower value of water-holding capacity. Journal of Industrial Microbiology & Biotechnology (2002) 29, 189–195 doi:10.1038/sj.jim.7000303 Received 01 March 2002/ Accepted in revised form 18 July 2002     

Production of isomeric 9,10,13 (9,12,13)-trihydroxy-11E (10E)-octadecenoic acid from linoleic acid by Pseudomonas aeruginosa PR3

Trihydroxy unsaturated fatty acids with 18 carbons have been reported as plant self-defense substances. Their production in nature is rare and is found mainly in plant systems. Previously, we reported that a new bacterial isolate, Pseudomonas aeruginosa PR3, converted oleic acid and ricinoleic acid to 7,10-dihydroxy-8(E)-octadecenoic acid and 7,10,12-trihydroxy-8(E)-octadecenoic acid, respectively. Here we report that strain PR3 converted linoleic acid to two compounds: 9,10,13-trihydroxy-11(E)-octadecenoic acid (9,10,13-THOD) and 9,12,13-trihydroxy-10(E)-octadecenoic acid (9,12,13-THOD). Stereochemical analyses showed the presence of 16 different diastereomers — the maximum number possible. The optimum reaction temperature and pH for THOD production were 30°C and 7.0, respectively. The optimum linoleic acid concentration was 10 mg/ml. The most effective single carbon and nitrogen sources were glucose and sodium glutamate, respectively. However, when a mixture of yeast extract (0.05%), (NH₄)₂HPO₄ (0.2%), and NH₄NO₃ (0.1%) was used as the nitrogen source, THOD production was higher by 8.3% than when sodium glutamate was the nitrogen source. Maximum production of total THOD with 44% conversion of substrate was achieved at 72 h of incubation, after which THOD production plateaued up to 240 h. THOD production and cell growth increased in parallel with glucose concentration up to 0.3%, after which cell growth reached its maximum and THOD production did not increase. These results suggested that THODs were not metabolized by strain PR3. This is the first report of microbial production of 9,10,13- and 9,12,13-THOD from linoleic acid. Journal of Industrial Microbiology & Biotechnology (2000) 25, 109–115. Received 18 March 2000/ Accepted in revised form 09 June 2000     

Performance of improved bacterial cellulose application in the production of functional paper

Aim: The purpose of this work was to study the feasibility of producing economic flame retardant bacterial cellulose (BC) and evaluating its behaviour in paper production. Methods and Results: This type of BC was prepared by Gluconacetobacter subsp. xylinus and substituting the glucose in the cultivation medium by glucose phosphate as a carbon source; as well as using corn steep liquor as a nitrogen source. The investigated processing technique did not dispose any toxic chemicals that pollute the surroundings or cause unacceptable effluents, making the process environmentally safe. The fire retardant behaviour of the investigated BC has been studied by non‐isothermal thermogravimetric analysis (TGA & DTGA). The activation energy of each degradation stage and the order of degradation were estimated using the Coats–Redfern equation and the least square method. Strength, optical properties, and thermogravimetric analysis of BC‐phosphate added paper sheets were also tested. Conclusions: The study confirmed that the use of glucose phosphate along with glucose was significant in the high yield production of phosphate containing bacterial cellulose (PCBC1); more so than the use of glucose phosphate alone (PCBC2). Incorporating 5% of the PCBC with wood pulp during paper sheet formation was found to significantly improve kaolin retention, strength, and fire resistance properties as compared to paper sheets produced from incorporating bacterial cellulose (BC). Significance and Impact of the Study: This modified BC is a valuable product for the preparation of specialized paper, in addition to its function as a fillers aid.     

Production of nanocellulose in miniature-bioreactor: Optimization and characterization

Bacterial cellulose (BC) is a very fascinating microbial biopolymer which is mainly produced by Gluconacetobacter xylinum. Optimization of BC production by G. xylinum was performed based on scale-down studies in miniature-bioreactor and response surface methodology in which the optimum pH value (6.5) and shaking rate (50?rpm) were obtained. The static culture condition for BC production has newly been defined. Nanostructure of BC includes nanofibers up to (60?nm) and nanoporosity up to (265?nm) was observed by scanning electron microscopy. By Fourier transform infrared spectroscopy study, the most expected BC interaction is nucleophilic interaction. MTT assay showed high biocompatibility. Appropriate mechanical strength (0.37?MPa) and Young’s modulus (3.36?MPa) evinced BC scaffold utilization for skin tissue. The results indicate that BC sheets can be utilized in biomedical application and nanotechnology approaches.     

Optimization of indole acetic acid production by isolated bacteria from Stevia rebaudiana rhizosphere and its effects on plant growth

The ability to synthesize Indole-3-acetic acid (IAA) is widely associated with the plant growth promoting rhizobacteria (PGPR). The present work deals with isolation and characterization of such bacteria from the rhizosphere of medicinal plant Stevia rebaudiana and optimization of IAA production from its isolates. The optimization of IAA production was carried out at different pH and temperature with varied carbon and nitrogen sources of culture media. Out of different isolates obtained, three of them were screened as efficient PGPRs on the basis of different plant growth promoting attributes. Isolates CA1001 and CA2004 showed better production of IAA at pH 9 (91.7?µg?ml^?1) and at temperature 37?°C (81.7?µg?ml^?1). Dextrose (1%) was found to be the best carbon source for isolate CA1001 with 104?µg?ml^?1 IAA production. Isolate CA 2004 showed best production of IAA 36?µg?ml^?1 and 34?µg?ml^?1 at 1.5% and 1% Beef extract as nitrogen source respectively. Isolate CA 1001 showed 32?µg?ml^?1 IAA production at 0.5% nicotinic acid concentration. From the current study, CA1001 and CA2004 emerged as noble alternatives for IAA production further which also resulted in root and shoot biomass generation in crop plants, hence can be further used as bio-inoculants for plant growth promotion.