Treatment of catechol bearing wastewater in an upflow anaerobic sludge blanket (UASB) reactor: sludge characteristics

This paper deals with the characteristics of anaerobic microbial granules grown in an UASB reactor treating catechol bearing synthetic wastewater (SWW). The specific methanogenic activity of the sludge showed an increase in trend with an increase in the organic loading rate and the catechol concentration in the SWW. The settling velocity of individual granules in the size range of 0.5-2.5mm was found to be in the range of 30-75mh(-1). The ash content in the sludge was 11.7% with a sludge volume index of 18-20mlg(-1). The inorganic elemental distribution within the granules showed a decrease except that for phosphorous and cobalt, which increased by approximately 12% and 18%, respectively, after the treatment of SWW. Scanning electron microscopy (SEM) coupled with electron disperse X-ray analysis showed an increase in the sulphur content by approximately 300% after the treatment of SWW. Surface mineral composition of the granules determined by XRD analysis indicated the existence of vuagnatite (CaAlSiO(4)(OH)). SEM observation of the granules showed the predominance of Methanosaeta and Methanobacterium type of species on the surface along with a variety of other species.     

Structure and composition of teleost scales from snakehead Channa argus (Cantor) (Perciformes: Channidae)

The structure of teleost scales from snakehead Channa argus was investigated using thermogravimetric analysis (TG), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive analysis of X-rays (EDAX), Fourier transform infra-red spectroscopy (FTIR) and X-ray diffraction (XRD). Thermal treatment of fish scales indicates that the fibrillary plate is partially calcified. SEM shows two kinds of scale denticles, arranged along the circuli in the anterior field and the lateral fields, respectively. TEM indicates the stratum laxum with abundant fibrils, chromatophores and capillary blood vessels within the scale covering, and shows the fibrillary plate as an 'orthogonal plywood structure' of stratified lamellae, consisting of 80–100 nm diameter collagen fibres co-aligned in individual lamellae and alternated by c. 90° of the fibre alignment between adjacent lamellae. EDAX, FTIR and XRD show that the mineral phase of the scales is a carbonated hydroxyapatite with a Ca:P molar ratio of 1·85.     

Anammox反应器启动过程中颗粒污泥性状变化特性

以厌氧颗粒污泥作为接种物,通过185 d的运行,成功启动了上流式厌氧氨氧化污泥床(Upflow anaerobic sludge blanket,UASB)反应器。反应器的进水氨氮与亚硝氮浓度分别提升至224 mg/L和255 mg/L,容积氮去除速率提升至3.76 kg/(m3·d)。采用红外光谱、扫描电镜和透射电镜等对厌氧氨氧化颗粒污泥的性状进行观察,发现颗粒污泥在启动过程中经历了污泥颗粒裂解到污泥颗粒重组的过程,且厌氧氨氧化颗粒污泥表面含有丰富的官能团,说明厌氧氨氧化颗粒污泥可能具有良好的吸附性能。采用宏基因组测序的方法对启动前后颗粒污泥的生态结构进行分析,发现原接种污泥优势菌群(变形菌门、厚壁菌门、拟杆菌门)丰度大幅减少,厌氧氨氧化菌所属的浮霉状菌门丰度则由1.59%提升到23.24%。     

Structural analysis of anaerobic granules in a phase separated reactor by electron microscopy

This paper discusses the microbial community structure of anaerobic granules and the effect of phase separation in anaerobic reactor on the characteristics of granules. Electron micrographs revealed that the core of anaerobic granular sludge consists predominantly of Methanosaeta-like cells, a key microorganism in granulation process. Granules in the methanogenic dominant zone of the reactor were stable and densely packed with smooth regular surface. On the other hand, granules subjected to acidogenic activities were less stable structures with broken parts and an irregular fissured surface. Anaerobic granules consisted of a vast diversity of species from the outer surface to the core of the granule and possessed a multi-layered structure. Viruses in the granules suggests the presence of bacteriophage in the granular biomass. These could be responsible for destroying cells and weakening the internal structure of granules, and thus possibly causing the breaking of granules. The observation of protozoa-like microorganism on the exterior zone of granular structure is believed to play an important role as bacterial predator and control the growth of bacterial cells. The images observed in this study shows that anaerobic granule harbour diverse number of microbial species, and act differently in acidogenic and methanogenic microbial zones.     

Intracellular and Extracellular Biomineralization Induced by Klebsiella pneumoniae LH1 Isolated from Dolomites

Abstract

The interaction between bacteria and minerals is very complicated and has been intensively studied in the laboratory and the field in the last few decades, but the processes and mechanisms of biomineralization and mineral precipitation are still not fully understood and need to be explored further. In the present work, biomineralization experiments were undertaken using Klebsiella pneumoniae LH1, collected from a natural surface environment in an area of outcrops of Cambrian dolomite, in a culture medium with various Mg/Ca molar ratios (0, 3, 6 and 12). The mineral precipitates obtained were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectrometer (EDS), Fourier transform infrared spectrometer (FTIR), laser scanning confocal microscopy (LSCM) and X-ray photoelectron spectroscopy (XPS). Cells were analyzed with a scanning transmission electron microscope (STEM), high resolution transmission electron microscope (HRTEM) and selected area electron diffraction (SAED). The composition of amino acids in extracellular polymeric substances (EPS) was also determined. In the experiments it was found that the production of ammonia and the presence of carbonate anhydrase promoted the increase of the medium pH and that minerals are nucleated on the EPS, which consist chiefly of amino acids and negatively-charged organic functional groups. With increasing Mg/Ca ratios, the mineral phases changed, including calcite (100%) at Mg/Ca molar ratio of 0, monohydrocalcite (36.05%) + dypingite (63.95%) at Mg/Ca molar ratio of 3, monohydrocalcite (29.72%) + dypingite (15.48%) + nesquehonite (54.80%) at Mg/Ca molar ratio of 6, and monohydrocalcite (14.2%) + dypingite (1.0%) + nesquehonite (84.80%) at Mg/Ca molar ratio of 12. Some intracellular amorphous calcium- and magnesium-rich inclusions were also detected in K. pneumoniae LH1, suggesting intracellular biomineralization accompanying the extracellular mineral precipitation. This study provides further understanding of the biomineralization processes of microorganisms.     

Precipitation potential as a major factor in the formation of granular sludge in an upflow sludge-blanket reactor for denitrification of drinking water

The effects of the chemical composition of water on granular sludge formation and characteristics in a denitrifying upflow sludge-blanket (USB) reactor were studied. Denitrification of drinking water showed different biomass sludge characteristics when the reactor was fed with groundwater as opposed to surface water. USB reactors fed with groundwater produced granules with good settling characteristics, SVI (sludge volume index) values lower than 30 ml/g, and high reactor biomass concentrations (20–25 g/l), while surface-water-fed reactors exhibited lower biomass concentrations (10–15 g/l) due to poor settling characteristics (SVI values of 50–90 ml/g). Sludge granules from the reactor fed with surface water had a low mineral content of between 10% and 20% as compared to a mineral content of 25%–50% in the groundwater reactor. The larger mineral content in the groundwater-fed reactor was due to a greater precipitation potential, i.e. higher concentrations of calcium and alkalinity present in groundwater combined with the release of alkalinity and subsequent increase in pH caused by biological denitrification. Verification for this phenomenon was established by enriching surface water with calcium and alkalinity, which increased the reactor's precipitation potential from 15 mg/1 to 40 mg/1 (as CaCO₃). The granules obtained from the reactor fed with enriched surface water had a high mineral content of between 40% and 50% and very low SVI values, contributing to improved granule-settling characteristics and reactor stability.     

Calcium accumulation characterization in the aerobic granules cultivated in a continuous-flow airlift bioreactor

Limited work has been done on the accumulation characterization of Ca²⁺ in aerobic granules that are cultivated in a continuous-flow bioreactor. In this work, the contribution of Ca²⁺ to the biogranulation in a continuous flow airlift fluidized bed (CAFB) reactor has been studied. The spatial distribution and form of calcium in the granules were investigated by scanning electron microscopy-mapping, energy dispersive X-ray and X-ray diffraction (XRD). Calcium was located throughout the Ca-rich granules, rather than accumulating in the center of the granules of the sequencing batch reactor. Furthermore, CaCO₃ was detected as the main crystalline mineral form of the calcium. Calcium augmentation of the inflow promoted the accumulation of magnesium in the granules in the CAFB. The magnesium was presented as Ca₇Mg₂P₆O₂₄ according to XRD analyses.     

Biosorption and biodegradation of pentachlorophenol (PCP) in an upflow anaerobic sludge blanket (UASB) reactor

In order to understand the fate of PCP in upflow anaerobic sludge blanket reactor (UASB) more completely, the sorption and biodegradation of pentachlorophenol (PCP) by anaerobic sludge granules were investigated. The anaerobic granular sludge degrading PCP was formed in UASB reactor, which was seeded with anaerobic sludge acclimated by chlorophenols. At the hydraulic retention time (HRT) of 20–22 h, and PCP loading rate of 200–220 mg l⁻¹ d⁻¹, UASB reactor exhibited good performance in treating wastewater which containing 170–180 mg l⁻¹ PCP and the PCP removal rate of 99.5% was achieved. Sequential appearance of tetra-, tri-, di-, and mono-chlorophenol was observed in the reactor effluent after 20 mg l⁻¹ PCP introduction. Sorption and desorption of PCP on the anaerobic sludge granules were all fitted to the Freundlich isotherm equation. Sorption of PCP was partly irreversible. The Freundlich equation could describe the behavior of PCP amount sorbed by granular sludge in anaerobic reactor reasonably well. The results demonstrated that the main mechanism leading to removal of PCP on anaerobic granular sludge was biodegradation, not sorption or volatization.     

Granulation and Sludge Bed Stability in Upflow Anaerobic Sludge Bed Reactors in Relation to Surface Thermodynamics

Adhesion of bacteria involved in anaerobic consortia was investigated in upflow anaerobic sludge bed reactors and was related to surface thermodynamics. The adhesion of hydrophilic cells appeared to be enhanced at a low liquid surface tension ((gamma)(infLV)), while the adhesion of hydrophobic cells was favored at a high (gamma)(infLV). Growth in protein-rich growth media resulted in low granular biomass yields; addition of polycations, such as poly-l-lysine and chitosan, increased the (gamma)(infLV) and the granular biomass yield. On the basis of the results of activity tests and microbial counts with wash-out cells, we identified two types of structured granules that were related to the influence of (gamma)(infLV). In one type of granules, hydrophilic acidogens surrounded a more hydrophobic methanogenic association. These granules were selected at a low (gamma)(infLV) provided that carbohydrates were available as substrates. The other type of granules was selected at a high (gamma)(infLV); hydrophobic cells (i.e., methanogens) were predominant throughout these granules. The granules which had acidogens as solid-phase emulsifiers around a methanogenic association appeared to allow more stable reactor performance. Decreasing the (gamma)(infLV) in the reactor by adding trace amounts of a surfactant also increased reactor stability.     

Synthesis and characterization of a novel polyamidoamine-cyclodextrin crosslinked copolymer

A novel insoluble crosslinked copolymer containing β-cyclodextrin (β-CD) structural units has been synthesized with polyamidoamine (PAMAM, generation 2) as comonomer. The polymer was characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), elemental analysis, scanning electron microscopy (SEM), pores and surface area analysis, X-ray diffraction analysis (XRD), and thermal analysis (thermogravimetric and differential scanning calorimetric measurement, TG/DSC). The results reveal that PAMAM-CD copolymer has been synthesized successfully and two β-CD molecules were cross-linked by one PAMAM (G2.0) molecule (on average). The copolymer has a reef-like surface with many irregular nanocavities, and its thermal stability is > 180°C in an argon atmosphere. The synthesis strategy presented in this work provides an innovative route for the synthesis of a PAMAM-CD-based copolymer. In preliminary sorption experiments, the PAMAM-CD copolymer exhibits high sorption capacities and high removal efficiencies toward both the heavy-metal ions (Cu(2+) and Pb(2+)) and organic compounds (2,4-dichlorophenol, 2,4,6-trichlorophenol, and ponceau 4R (C.I. 16255)). The polymer may provide many possibilities for applications in biomedical sensing, flocculation, sorption, and therapeutics.     

Preparation of pH- and ionic-strength responsive biodegradable fumaric acid crosslinked carboxymethyl cellulose

A novel biodegradable sodium carboxymethyl cellulose (NaCMC)-based hydrogel was synthesized by using fumaric acid (FA) as a crosslinking agent at various ratios. Hydrogels (CMCF) were characterized using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Swelling behaviors of hydrogels were investigated in distilled water, various salt, and pH solutions. The FTIR results indicated the crosslinking between carboxyl groups of FA with hydroxyl group of NaCMC through ester formation. AFM analyses showed that roughness of hydrogel surface decreased with increasing crosslinker concentration. The swelling capacity decreased with an increase in charge of the metal cation (Al(3+)相似文献   

Microbial Reduction of Cr (VI)-loaded Schwertmannite by Shewanella oneidensis MR-1

Microbial transformation of sulfate minerals plays an important role in controlling the behavior of heavy metals in mining areas. Here, the anaerobic reduction of Cr (VI)-loaded schwertmannite by Shewanella oneidensis MR-1 (S. oneidensis MR-1) was investigated. The release of ferrous iron (Fe(II)) to the solution demonstrated the microbial reduction of structural Fe(III) from the schwertmannite to Fe(II). The concentration of Cr in solution decreased in all treatments, indicating that no Cr was released to the solution during this bio-reduction process of schwertmannite. The incorporation of chromate into the mineral structure of schwertmannite increased the microbial stability of the mineral, retarding the formation of secondary phases during bio-reduction process. Analysis of the XRD, SEM and fourier transform infrared spectroscopy (FT-IR) results further showed that goethite formed after 3 or 7 days with a lower content (0.22% or 0.37%) of Cr in schwertmannite, while no secondary mineral was observed with a higher concentration of Cr (0.6 wt%) incorporated in schwertmannite until 22 days. These results imply that microbial reduction of Cr(VI)-loaded schwertmannite does not lead to the release of Cr to the solution, and the microbial stability of schwertmannite will be increased by the incorporation of chromate.     

Simple organocatalytic route for the synthesis of starch esters

Starch acetates and starch butyrates with degree of substitution (DS) in the range of 0.06–1.54 were prepared by a simple direct solvent-free organocatalytic methodology of starch acylation. The starch esters synthesized have important applications in the food and pharmaceutical industries, among others. The acylation methodology used involves a non-toxic biobased α-hydroxycarboxylic acid as catalyst, and proceeds with high efficiency in absence of solvents. The effect of reaction time on the advance of starch modification was studied as a simple way to control the level of substitution achieved, when all other reaction parameters were kept constant. Starch esters were characterized by means of Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). FTIR spectroscopy qualitatively confirmed the esterification of starch by the appearance of bands which are associated with esters groups. Scanning electron microscopy showed that the granular structure of the polysaccharide was preserved upon acylation, although acylated granules had rougher surfaces; and wrinkles, grooves and deformed zones appeared in some granules at high DS. Thermogravimetric analysis showed a gradual reduction in the water content of acylated starches, as well as noticeable changes in their thermal properties at increasing DS. X-ray diffraction analysis showed that the acetylation treatment led to lower crystallinity at increasing DS, although characteristic corn starch A-type patterns could be identified even at the highest DS achieved (DS = 1.23). Specific bands and weight losses derived from FTIR and TGA data could be very well correlated with the substitution degree achieved in acetylated starches at DS lower/equal than 0.6. The organocatalytic methodology described for the synthesis of starch acetates and butyrates has the potential to be easily extended to the synthesis of other starch esters using a variety of anhydrides or carboxylic acids as acylating agents     

Effect of Pyrolysis Temperature on Chemical and Surface Properties of Biochar of Rapeseed (Brassica napus L.)

The biochar is an important carbon-rich product that is generated from biomass sources through pyrolysis. Biochar (charcoal) can be both used directly as a potential source of solid biofuels and as soil amendments for barren lands. The aim of this study was investigate influence of pyrolysis temperature on the physicochemical properties and structure of biochar. The biochars were produced by pyrolysis of rapeseed (Brassica napus L.) using a fixed-bed reactor at different pyrolysis temperatures (400–700°C). The produced biochars were characterized by proximate and elemental analysis, Brunauer–Emmett–Teller (BET) surface area, particle size distributions, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy. The results showed that both chemical and surface properties of the biochars were significantly affected by the pyrolysis temperature. Aromatic hydrocarbons, hydroxyl and carbonyl compounds were the majority components of the biochar. The biochar obtained at 700°C had a high fixed carbon content (66.16%) as well as a high heating value, and therefore it could be used as solid fuel, precursor in the activated carbons manufacture (specific surface area until 25.38 m² g^?1), or to obtain category-A briquettes.     

Preparation and characterization of activated carbon derived from the thermo-chemical conversion of chicken manure

Physico-chemical properties of a bioorganic char were modified by pyrolysis in the presence of NaOH, and with subsequent physical activation of carbonaceous species with CO2 a value-added activated carbon was fabricated. Bioorganic char is produced as a co-product during the production of bio-fuel from the pyrolysis of chicken litter. Untreated char contains approximately 37 wt% of C and approximately 43-45 wt% of inorganic minerals containing K, Ca, Fe, P, Cu, Mg, and Si. Carbonization and chemical activation of the char at 600 degrees C in the presence of NaOH in forming gas (4% H2 balanced with Ar) produced mainly demineralized activated carbon having BET (Brunauer, Emmett, and Teller) surface area of 486 m2/g and average pore size of 2.8 nm. Further physical activation with CO2 at 800 degrees C for 30 min resulted in activated carbon with BET surface area of 788 m2/g and average pore size of 2.2 nm. The mineral content was 10 wt%. X-ray photoelectron spectroscopy (XPS) indicated that the latter activation process reduced the pyrrolic- and/or pyridonic-N, increased pyridinic-N and formed quaternary-N at the expense of pyrrolic- and/or pyridonic-N found in the untreated char.     

Rapid formation of hydrogen-producing granules in an anaerobic continuous stirred tank reactor induced by acid incubation

A novel approach to rapidly initiate granulation of hydrogen-producing sludge was developed in an anaerobic continuous stirred tank reactor at 37 degrees C. To induce microbial granulation, the acclimated culture was subject to an acid incubation for 24 h by shifting the culture pH from 5.5 to 2.0. The culture was resumed to pH 5.5 after the incubation and the reactor was operated at hydraulic retention times (HRTs) of 12, 6, 2, 1, and 0.5 h in sequence. Microbial aggregation took place immediately with the initiation of acid incubation and granules were developed at 114 h. No granule was observed in the absence of acid incubation in the control test. Changing the culture pH resulted in improvement in surface physicochemical properties of the culture favoring microbial granulation. The zeta potential increased from -11.6 to -3.5 mV, hydrophobicity in terms of contact angle improved from 31 degrees to 43 degrees and extracellular proteins/polysaccharides ratio increased from 0.2 to 0.5-0.8. Formation of granular sludge facilitated biomass retention of up to 32.2 g-VSS/L and enhanced hydrogen production. The hydrogen production rate and hydrogen yield increased with the reduction in HRT at an influent glucose concentration of 10 g/L once steady granular sludge layer was formed, achieving the respective peaks of 3.20 L/L x h and 1.81 mol-H(2)/mol-glucose at 0.5 h HRT. The experimental results suggested that acid incubation was able to initiate the rapid formation of hydrogen-producing granules by regulating the surface characteristics of microbial aggregates in a well-mixed reactor, which enhanced the hydrogen production.     

Modeling a granule‐based anaerobic ammonium oxidizing (ANAMMOX) process

A mathematical model was developed to describe the anaerobic ammonium oxidation (ANAMMOX) process in a granular upflow anaerobic sludge blanket (UASB) reactor. ANAMMOX granules were cultivated in the UASB reactor by seeding aerobic granules. The granule‐based reactor had a great N‐loading resistant capacity. The model simulation results on the 1‐year reactor performance matched the experimental data well. The yield coefficient for the growth and the decay rate coefficient of the ANAMMOX granules were estimated to be 0.164 g COD g^?1 N and 0.00016 h^?1, respectively. With this model, the effects of process parameters on the reactor performance were evaluated. Results showed that the optimum granule diameter for the maximum N‐removal should be between 1.0 and 1.3 mm and that the optimum N loading rate should be 0.8 kg N m^?3 d^?1. In addition, the substrate micro‐profiles in the ANAMMOX granules were measured with a microelectrode to explore the diffusion dynamics within the granules, and the measured profiles matched the predicted results well. Biotechnol. Bioeng. 2009;103: 490–499. © 2009 Wiley Periodicals, Inc.     

Granular sludge formation in upflow anaerobic sludge blanket (UASB) reactors

The state of the art for upflow anaerobic sludge blanket (UASB) reactors is discussed, focusing on the microbiology of immobilized anaerobic bacteria and the mechanism of granule formation. The development of granular sludge is the key factor for successful operation of the UASB reactors. Criteria for determining if granular sludge has developed in a UASB reactor is given based on the densities and diameters of the granular sludge. The shape and composition of granular sludge can vary significantly. Granules typically have a spherical form with a diameter from 0.14 to 5 mm. The inorganic mineral content varies from 10 to 90% of the dry weight of the granules, depending on the wastewater composition etc. The main components of the ash are calcium, potassium, and iron. The extracellular polymers in the granular sludge are important for the structure and maintenance of granules, while the inorganic composition seems to be of less importance. The extracellular polymer content varies between 0.6 and 20% of the volatile suspended solids and consists mainly of protein and polysaccharides. Both Methanosaeta spp. (formerly Methanothrix) and Methanosarcina spp. have been identified as important aceticlastic methanogens for the initial granulation and development of granular sludge. Immunological methods have been used to identify other methanogens in the granules. The results have showed that, besides the aceticlastic methanogens Methanosaeta spp. and Methanosarcina spp., hydrogen and formate utilizing bacteria are also present, e.g., Methanobacterium formicicum, Methanobacterium thermoautotrophicum, and Methanobrevibacter spp. Microcolonies of syntrophic bacteria are often observed in the granules, and the significant electron transfer in these microcolonies occurs through interspecies hydrogen transfer. The internal organization of the various groups of bacteria in the granules depends on the wastewater composition and the dominating metabolic pathways in the granules. Internal organization is observed in granules where such an arrangement is beneficial for an optimal degradation of the wastewater. A four-step model is given for the initial development of granular sludge. (c) 1996 John Wiley & Sons, Inc.     

Presence of anaerobic bacteroides in aerobically grown microbial granules

Microbial granules were grown in a column-type sequential aerobic sludge blanket reactor inoculated with activated sludge flocs taken from a wastewater treatment plant and containing a medium with glucose as the main carbon source. The reactor selected for granules that could settle rapidly by employing a short settling time of 2 min. Matured granules with diameters between 2 and 3 mm were examined for anaerobic bacteria as their presence can signal the onset of diffusion limitation problems that can potentially diminish granule stability due to the bacterial production of fermentation gases and organic acids under anaerobic conditions. To detect the anaerobes in the granules, clones were constructed from 16S rRNA PCR amplicons. Two sequence types associated with a strict anaerobe Bacteroides spp. were identified from these clones. Fluorescence in situ hybridization (FISH) followed by confocal laser scanning microscopy (CLSM) demonstrated that cells of Bacteroides spp. were concentrated at a depth of approximately 800 mm below the surface of the granule. Cell enumeration using flow cytometry showed that the percentage of labeled cells of Bacteroides spp. compared to total bacterial cells in the granules was 0.56%. This is the first study to use a suite of culture-independent techniques to report the presence of a defined species of anaerobic bacteria in aerobically grown microbial granules.     

Physicochemical characteristics of microbial granules

Microbial granules play an important role in the field of biological wastewater treatment due to their advantages over the conventional sludge flocs, such as a denser and stronger aggregate structure, better settleability and ensured solid-effluent separation, higher biomass concentration, and greater ability to withstand shock loadings. A better understanding of microbial granules may help in engineering biological wastewater treatment systems. Recent studies have greatly expanded our vision over the physicochemical characteristics of microbial granules. This paper provides an up-to-date review on recent work in the understanding of physicochemical characteristics of both anaerobic and aerobic granules with regard to settleability, permeability, morphology, mechanical stability, rheology, porosity, surface adsorbability, surface hydrophobicity and thermodynamics, and extracellular polymeric substances. Our growing knowledge on such characteristics might facilitate the engineering and optimization of microbial granulation as one of the most promising techniques in biological wastewater treatment.