Synthesis of tripeptide RGD amide by a combination of chemical and enzymatic methods

The tripeptide Bz-Arg-Gly-Asp(NH₂)OH was synthesized by a combination of chemical and enzymatic methods in this study. Firstly, Gly-Asp-(NH₂)₂ was synthesized by a novel chemical method in three steps including chloroacetylation of l-aspartic acid, esterification of chloroacetyl l-aspartic acid and ammonolysis of chloroacetyl l-aspartic acid diethyl ester. Secondly, the linkage of the third amino acid (Bz-Arg-OEt) to Gly-Asp-(NH₂)₂ was completed by enzymatic method under kinetic control condition. An industrial alkaline protease alcalase was used in water–organic cosolvents systems. The synthesis reaction conditions were optimized by examining the effects of several factors including water content, temperature, pH and reaction time on the yield of the synthesis product Bz-Arg-Gly-Asp(NH₂)OH. The optimum conditions are pH 8.0, 35 °C, in ethanol/Tris–HCl buffer system (85:15, v/v), 8 h with the tripeptide yield of 73.6%.     

Chemo-enzymatic synthesis of tripeptide RGD diamide in organic solvents

The tripeptide BzArgGlyAsp(NH(2))(2) was synthesized by a combination of chemical and enzymatic methods in this study. First of all, GlyAsp(NH(2))(2) was synthesized by a novel chemical method in three steps including chloroacetylation of L-aspartic acid, esterification of chloroacetyl L-aspartic acid and ammonolysis of chloroacetyl L-aspartic acid diethyl ester. Secondly, kinetically controlled synthesis of BzArgGlyAsp(NH(2))(2) catalyzed by trypsin in organic solvent was conducted. The optimum conditions are pH 8.0, 30 degrees C in ethanol/Tris-HCl buffer system (85:15, v/v) for 80 min in the maximum yield of 74.4%.     

Subtilisin Carlsberg in complex with sodium dodecyl sulfate is an effective catalyst for the solid phase segment coupling of peptides on polyvinyl alcohol cryogel

Subtilisin Carlsberg (SC) was shown to catalyze the solid phase segment coupling of peptides in complex with sodium dodecyl sulfate (SDS) in an organic medium on Aminosilochrom and polyvinyl alcohol (PVA) cryogel activated with glutaraldehyde or divinylsulfone. Diamines of different lengths with a general formula NH₂-(CH₂) _n -NH₂ (n = 2, 4, and 6) were used as spacers between the PVA cryogel and the peptide. A model reaction of enzymatic attachment of the Dnp-Ala-Ala-Leu-OMe tripeptide to the PVA cryogel was carried out by treatment with the SDS-SC complex in a mixture of anhydrous ethanol and DMSO (7 : 3, v/v) using a tenfold excess of the carboxyl component. The molar enzyme-substrate ratio was 1 : 88. The effect of the method of matrix activation, length of a spacer, and reaction time on the coupling efficiency was studied. Hexamethylenediamine was found to be the most effective spacer for the enzymatic coupling on the PVA cryogel activated with glutaraldehyde (the reaction proceeded with the highest yield of 60%). The reaction efficiency was considerably lower in the case of ethylenediamine and tetramethylenediamine (10 and 15%, respectively). The best results were obtained on the PVA cryogel activated by divinylsulfone with hexamethylenediamine as a spacer. A two-step condensation of tripeptides was carried out on this support. The second step of condensation was shown to proceed better (in 85% yield) in comparison with the first step (37% yield).     

Protease-Catalyzed Synthesis of a Precursor Dipeptide,Z-Asp-Val-NH2 of Thymopentin,in Organic Solvents

Abstract

The protease-catalyzed, kinetically controlled synthesis of a precursor dipeptide, Z-Asp-Val-NH₂ of thymopentin (TP-5), in organic solvents was studied. Z-Asp-OMe and Val-NH₂ were used as the acyl donor and the nucleophile, respectively. An industrial alkaline protease alcalase was used to catalyze the synthesis of the target dipeptide in water-organic cosolvent systems. The conditions of the synthesis reaction were optimized by examining the effects of several factors, including organic solvents, water content, temperature, pH, and reaction time on the yield of Z-Asp-Val-NH₂. The optimum conditions using alcalase as the catalyst are pH 10.0, 35°C, in acetonitrile/Na₂CO₃-NaHCO₃ buffer system (9:1, V/V), reaction time 5 h, with a yield of 63%. The dipeptde product was confirmed by LC- MS.     

Synthesis of a Precursor Dipeptide of Thymopentin in Organic Solvents by an Enzymatic Method

Abstract

The protease‐catalyzed, kinetically controlled synthesis of a precursor dipeptide of thymopentin(TP‐5), Z‐Arg‐Lys‐NH₂ in organic solvents was studied. Z‐Arg‐OMe was used as the acyl donor and Lys‐NH₂ was used as the nucleophile. An industrial alkaline protease alcalase and trypsin were used to catalyze the synthesis of the target dipeptide in water‐organic cosolvent systems. The conditions of the synthesis reaction were optimized by examining the effects of several factors, including organic solvents, water content, temperature, pH, and reaction time on the yield of Z‐Arg‐Lys‐NH₂. The optimum conditions using alcalase as the catalyst are pH 10.0, 35°C, in acetonitrile/DMF/Na₂CO₃‐NaHCO₃ buffer system (80∶10∶10, V/V), 6 h, with the dipeptide yield of 71.1%. Compared with alcalase, the optimum conditions for trypsin are pH 8.0, 35°C, in ethanol/Tris‐HCl buffer system (80∶20, V/V), 4 h, with the dipeptide yield of 76.1%.     

The role of hydration in enzyme activity and stability: 1. Water adsorption by alcohol dehydrogenase in a continuous gas phase reactor

The enzymatic synthesis of the tripeptide derivative Z-Gly-Trp-Met-OEt is reported. This tripeptide is a fragment of the cholecystokinin C-terminal octapeptide CCK-8. Studies on the alpha-chymotrypsin catalyzed coupling reaction between Z-Gly-Trp-R(1) and Met-R(2) have focused on low water content media, using deposited enzyme on inert supports such as Celite and polyamide. The effect of additives (polar organic solvents), the acyl-donor ester structure, the C-alpha protecting group of the nucleophile, enzyme loading, and substrate concentration were tested. The best reaction medium found was acetonitrile containing buffer (0.5%, v/v) and triethylamine (0.5%, v/v) using the enzyme deposited on Celite as catalyst (8 mg of alpha-chymotrypsin/g of Celite). A reaction yield of 81% was obtained with Z-Gly-Trp-OCam as acyl donor, at an initial concentration of 80 mM. The tripeptide synthesis was scaled up to the production of 2 g of pure tripeptide with an overall yield of 71%, including reaction and purification steps. (c) 1996 John Wiley & Sons, Inc.     

Synthesis of a highly fluorescent N,N‐dimethyl benzylamine–palladium(II) curcuminate complex and its application for determination of trace amounts of water in organic solvents

In this work a new highly fluorescent N,N‐dimethyl benzylamine–palladium(II) yu complex was synthesized by the reaction of [Pd₂{(C,N–C₆H₄CH₂N(CH₃)₂}₂(μ‐OAc)]₂] with curcumin. The structure of the synthesized complex was characterized using Fourier transform infra‐red (FT‐IR) spectroscopy, ¹H nuclear magnetic resonance spectroscopy, and elemental analysis. Fluorescence quantum yield (Φ_F) values of the synthesized complex in dimethyl sulfoxide (DMSO), acetonitrile, ethanol, and methanol were 0.160, 0.104, 0.068, and 0.061, respectively. The fluorescence signal of the complex in the organic solvents was very sensitive to the water content of the organic solvent. The quenching effect of water was used to determine trace amounts of water in the heteroatom‐containing organic solvents (ethanol, methanol, acetonitrile) and redox‐active solvents (DMSO). The linear ranges for determination of water (v/v %) in ethanol, DMSO and acetonitrile were found to be 0.03–14.5, 0.08–13.8, and 0.07–18.8, respectively. Two linear ranges were found for determination of water (v/v %) in methanol (0.1–1.2 and 4.7–25.0). Detection limit (DL) values were calculated to be 0.001, 0.05, 0.004, and 0.01 (v/v %) in ethanol, methanol, acetonitrile, and DMSO, respectively. The proposed method overcomes the problems of the standard Karl Fischer method for determination of water in DMSO. In addition, it gave the best DL value for determination of water in ethanol compared with all published papers to date.     

Peptide synthesis enzymatically catalyzed in a biphasic system: Water–water–immiscible organic solvent

Synthesis of a peptide bond is suggested to be enzymatically catalysed in a biphasic system “water–water-immiscible organic solvent”. The pH dependence of the apparent equilibrium constant is studied for synthesis of N-acetyl-L -tryptophanyl-L -leucine amide from N-Acet-Trp andL -Leu-NH₂. The reaction was performed in the biphasic system ethyl acetate plus water [from 2 to 2% (v/v)] in the presence of α-chymotrypsin. The suggested approach is preparative value: with the stoichiometric ratio of the reagents, [N-Acet-L -Trp] = [L -Leu-NH₂] = 2 × 10^?3M, the yield is practically 100% (in water, with other conditions being the same, the yield is not over 01.%).     

Solvent selection and optimization of α‐chymotrypsin‐catalyzed synthesis of N‐Ac‐Phe‐Tyr‐NH2 using mixture design and response surface methodology

A peptide, N‐Ac‐Phe‐Tyr‐NH₂, with angiotensin I‐converting enzyme (ACE) inhibitor activity was synthesized by an α‐chymotrypsin‐catalyzed condensation reaction of N‐acetyl phenylalanine ethyl ester (N‐Ac‐Phe‐OEt) and tyrosinamide (Tyr‐NH₂). Three kinds of solvents: a Tris–HCl buffer (80 mM, pH 9.0), dimethylsulfoxide (DMSO), and acetonitrile were employed in this study. The optimum reaction solvent component was determined by simplex centroid mixture design. The synthesis efficiency was enhanced in an organic‐aqueous solvent (Tris‐HCl buffer: DMSO: acetonitrile = 2:1:1) in which 73.55% of the yield of N‐Ac‐Phe‐Tyr‐NH₂ could be achieved. Furthermore, the effect of reaction parameters on the yield was evaluated by response surface methodology (RSM) using a central composite rotatable design (CCRD). Based on a ridge max analysis, the optimum condition for this peptide synthesis included a reaction time of 7.4 min, a reaction temperature of 28.1°C, an enzyme activity of 98.9 U, and a substrate molar ratio (Phe:Tyr) of 1:2.8. The predicted and the actual (experimental) yields were 87.6 and 85.5%, respectively. The experimental design and RSM performed well in the optimization of synthesis of N‐Ac‐Phe‐Tyr‐NH₂, so it is expected to be an effective method for obtaining a good yield of enzymatic peptide. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Solvent effect on enzyme-catalyzed synthesis of β- -glucosides using the reverse hydrolysis method: Application to the preparative-scale synthesis of 2-hydroxybenzyl and octyl β- -glucopyranosides

Almond β- -glucosidase was used to catalyze alkyl-β- -glucoside synthesis by reacting glucose and the alcohol in organic media. The influence of five different solvents and the thermodynamic water activity on the reaction have been studied. The best yields were obtained in 80 or 90% (v/v) tert-butanol, acetone, or acetonitrile where the enzyme is very stable. In this enzymatic synthesis under thermodynamic control, the yield increases as the water activity of the reaction medium decreases. Enzymatic preparative-scale syntheses were performed in a tert-butanol-water mixture which was found to be the most appropriate medium. 2-Hydroxybenzyl β- -glucopyranoside was obtained in 17% yield using a 90:10 (v/v) tert-butanol-water mixture. Octyl-β-glucopyranoside was obtained in 8% yield using a 60:30:10 (v/v) tert-butanol-octanol-water mixture.     

Synthesis of methyl (R)-3-(4-fluorophenyl)glutarate via enzymatic desymmetrization of a prochiral diester

An efficient procedure for enzymatic desymmetrization of the prochiral dimethyl 3-(4-fluorophenyl)glutarate (3-DFG) in an aqueous–organic phase was successfully developed to prepare methyl (R)-3-(4-fluorophenyl)glutarate ((R)-3-MFG). Novozym 435 was selected as a highly efficient biocatalyst through lipase screening. The effects of various parameters in terms of co-solvent and its concentration, buffer pH, ionic strength and reaction temperature, on the reaction were investigated. It was found that 0.2 M phosphate buffer (pH 8.0) containing 20% MTBE (v/v) was the optimum reaction medium, and the optimum reaction temperature was 30 °C. Under the optimized reaction conditions, (R)-3-MFG was obtained in 95.6% ee value and 92.6% yield after 64 h when the concentration of 3-DFG and Novozym 435 were 200 mmol/l and 20 g/l respectively. Furthermore, Novozym 435 showed an excellent operational stability, retaining above 95% of the initial activity and enantioselectivity after 10 cycles of reaction. The developed method has a potential to be used for efficient enzymatic production of (R)-3-MFG.     

Characterization and enzymatic hydrolysis of hydrothermally treated β-1,3–1,6-glucan from <Emphasis Type="Italic">Aureobasidium pullulans</Emphasis>

The chemical structure of hydrothermally treated β-1,3–1,6-glucan from Aureobasidium pullulans was characterized using techniques such as gas chromatography/mass spectrometry (GC/MS) and nuclear magnetic resonance (NMR). The chemical shifts of anomeric carbons observed in the ¹³C-NMR spectra suggested the presence of single flexible chains of polysaccharide in the sample. β-1,3–1,6-Glucan from A. pullulans became water-soluble, with an average molecular weight of 128,000 Da after hydrothermal treatment, and the solubility in water was approximately 10% (w/w). Sample (3% w/v) was completely hydrolyzed to glucose by enzymatic reaction with Lysing enzymes from Trichoderma harzianum. Gentiobiose (Glcβ1 → 6Glc) and glucose were released as products during the reaction, and the maximum yield of gentiobiose was approximately 70% (w/w). The molar ratio of gentiobiose to glucose after 1 h reaction suggested that the sample is likely highly branched. Sample (3% w/v) was also hydrolyzed to glucose by Uskizyme from Trichoderma sp., indicating that it is very sensitive to enzymatic hydrolysis.     

Lipase-catalyzed asymmetric hydrolysis of 3-phenylglycidic acid ester,the key intermediate in the synthesis of diltiazem hydrochloride

Asymmetric hydrolytic enzymes for trans-3-(4-methoxyphenyl)glycidic acid methyl ester [(±)-MPGM], a key intermediate in the synthesis of diltiazem hydrochloride that is useful as a coronary vasodilator, were screened from 730 microorganisms. Among the microbial enzymes tested, Serratia marcescens lipase had the highest enantioselectivity (E=135) for hydrolysis of (±)-MPGM in a two-phase system using water (pH 8) and a water-immiscible solvent such as toluene. Resolution of (±)-MPGM by S. marcescens lipase gave (2R, 3S)-3-(4-methoxyphenyl)glycidic acid methyl ester [(−)-MPGM] with a reaction yield of 48% and optical purity of >99.9% e.e. After the reaction, the emulsion of toluene and water was separated into two clear layers by the addition of sodium dodecyl sulfate. The crystalline (−)-MPGM was isolated with a yield of over 43% and optical purity of 100% e.e. without column treatment. Diltiazem hydrochloride synthesis using asymmetric hydrolysis of (±)-MPGM was found to be a more efficient process compared to the conventional chemical synthetic process. Some enzymatic characterizations on asymmetric hydrolysis in two-phases of organic solvent-water by S. marcescens lipase were investigated.     

Process optimization for the production of diosgenin with Trichoderma reesei

Based on the response surface methodology, an effective microbial system for diosgenin production from enzymatic pretreated Dioscorea zingiberensis tubers with Trichoderma reesei was studied. The fermentation medium was optimized with central composite design (3⁵) depended on Plackett–Burmann design which identified significant impacts of peptone, K₂HPO₄ and Tween 80 on diosgenin yield. The effects of different fermentation conditions on diosgenin production were also studied. Four parameters, i.e. incubation period, temperature, initial pH and substrate concentration were optimized using 4⁵ central composite design. The highest diosgenin yield of 90.57% was achieved with 2.67% (w/v) of peptone, 0.29% (w/v) of K₂HPO₄, 0.73% (w/v) of Tween 80 and 9.77% (w/v) of substrate, under the condition of pH 5.8, temperature 30 °C. The idealized incubation time was 6.5 days. After optimization, the product yield increased by 33.70% as compared to 67.74 ± 1.54% of diosgenin yield in not optimized condition. Scale-up fermentation was carried out in a 5.0 l bioreactor, maximum diosgenin yield of 90.17 ± 3.12% was obtained at an aeration of 0.80 vvm and an agitation rate of 300 rpm. The proposed microbial system is clean and effective for diosgenin production and thus more environmentally acceptable than the traditional acid hydrolysis.     

Protease-catalyzed tripeptide (RGD) synthesis

The tripeptide Bz-Arg-Gly-Asp(-OMe)-OH was synthesized by enzymatic method. Bz-Arg-Gly-OEt was synthesized by trypsin in ethanol containing 0.1 M Tris/HCl buffer (pH 8.0), and then H-Asp(-OMe)(2) was incorporated into the Bz-Arg-Gly-OEt using chymopapain in 0.25M CHES/NaOH buffer (pH = 9.0, EDTA 10 mM). The yield of Bz-Arg-Gly-OEt and Bz-Arg-Gly-Asp(-OMe)-OH were 80% and 70% using 1M Bz-Arg-OEt and 0.5M Bz-Arg-Gly-OEt, respectively. For Bz-Arg-Gly-OEt synthesis reaction at high concentrations of the substrates, the buffer content in ethanol was a key factor to determine the optimal reaction condition. In Bz-Arg-Gly-Asp(-OMe)-OH synthesis reaction, the yield was low in organic solvent due to various side products such as Bz-Arg-OH, Bz-Arg-Gly-OH, and Bz-Arg-Gly-Asp(-OMe)-Asp(-OMe)-OH, suggesting that chymopapain has a very broad substrate specificity of the S(1) site. The Bz-Arg-Gly-Asp(-OMe)-OH synthesis rate and its yield were dramatically elevated and the side reactions were reduced using only the CHES/NaOH buffer (pH = 9.0, EDTA 10 mM) as a reaction media. The final product Bz-Arg-Gly-Asp(-OMe)-OH was identified to be formed via C-terminal hydrolysis of Bz-Arg-Gly-Asp(-OMe)(2) after the nucleophile, H-Asp(-OMe)(2), was added.     

Solvent effect on enzyme-catalyzed synthesis of β-d-glucosides using the reverse hydrolysis method: Application to the preparative-scale synthesis of 2-hydroxybenzyl and octyl β-d-glucopyranosides

Almond β-d-glucosidase was used to catalyze alkyl-β-d-glucoside synthesis by reacting glucose and the alcohol in organic media. The influence of five different solvents and the thermodynamic water activity on the reaction have been studied. The best yields were obtained in 80 or 90% (v/v) tert-butanol, acetone, or acetonitrile where the enzyme is very stable. In this enzymatic synthesis under thermodynamic control, the yield increases as the water activity of the reaction medium decreases. Enzymatic preparative-scale syntheses were performed in a tert-butanol-water mixture which was found to be the most appropriate medium. 2-Hydroxybenzyl β-d-glucopyranoside was obtained in 17% yield using a 90:10 (v/v) tert-butanol-water mixture. Octyl-β-glucopyranoside was obtained in 8% yield using a 60:30:10 (v/v) tert-butanol-octanol-water mixture.     

Enzymatic Synthesis of N-formyl-L-aspartyl-L-phenylalanine Methyl Ester (Aspartame Precursor) Utilizing an Extractive Reaction in Aqueous/Organic Biphasic Medium

N-Formyl-L-aspartyl-L-phenylalanine methyl ester (N-formyl aspartame, F-AspPheOMe) was synthesized enzymatically utilizing an extractive reaction in an aqueous/organic biphasic system. The N-formyl aspartame yield in a pure aqueous monophasic system was, in general, ca. 3% , however, it was over 80 % in a water/1-butanol biphasic system using a simultaneously extractive operation of an enzymatic reaction in an aqueous phase and a product separation from an aqueous to an organic phases.     

Chemical modification with functionalized ionic liquids: a novel method to improve the enzymatic properties of Candida rugosa lipase

Chemical modification of lysine residues in Candida rugosa lipase (CRL) was carried out using five different functional ionic liquids, and about 15.4–25.0 % of the primary amino groups of lysine were modified. Enzymatic properties of the native and modified CRLs were investigated in olive oil hydrolysis reaction. Improved thermal stability, catalytic activity in organic solvents, and adaptability to temperature and pH changes were achieved compared with the native enzyme. CRL modified by [choline][H₂PO₄] showed the best results, bearing a maximum improvement of 16.7 % in terms of relative activity, 5.2-fold increase in thermostability (after incubation at 45 °C for 5 h), and 2.3-fold increase in activity in strong polar organic solvent (80 % dimethyl sulfoxide) compared with the native enzyme. The results of ultraviolet, circular dichroism and fluorescence spectroscopy suggested that the change of the secondary and tertiary structures of CRL caused by the chemical modification resulted in the enhancement of enzymatic performance. The modification of CRL with functional ionic liquids was proved to be a novel and efficient method for improving the enzymatic properties of CRL.     

Mandelic acid chiral separation utilizing a two-phase partitioning bioreactor built by polysulfone microspheres and immobilized enzymes

A novel two-phase partitioning bioreactor (TPPB) modified by polysulfone (PSF) microspheres and immobilized enzyme (novozym-435) was formed, and the resulting TPPB was applied into mandelic acid chiral separation. The PSF microspheres containing n-hexanol (named PSF/hexanol microspheres) was prepared by using the phase inversion method, which was used as the organic phase. Meanwhile, the immobilized enzyme novozym-435 was used as a biocatalyst. The water phase was composed of the phosphate buffer solution (PBS). (R, S)-Methyl mandelate was selected as the substrate to study enzymatic properties. Different reaction factors have been researched, such as pH, reaction time, temperature and the quantity of biocatalyst and PSF/hexanol microspheres added in. Finally, (S)-mandelic acid was obtained with an 80 % optical purity after 24 h in the two-phase partitioning bioreactor. The enantiomeric excess (ee_p) values were very low in the water phase, in which the highest ee_p value was only 46 %. The ee_p of the two-phase partitioning bioreactor had been enhanced more obviously than that catalyzed in the water phase.     

Subtilisin Carlsberg in complex with sodium dodecyl sulfate--an effective catalyst for the solid phase segment coupling of peptides on polyvinyl alcohol cryogel

Subtilisin Carlsberg (SK) was shown to catalyze the solid phase segment coupling of peptides in complex with sodium dodecyl sulfate (SDS) in an organic medium on Aminosilochrom and polyvinyl alcohol (PVA) cryogel activated with glutaraldehyde or divinylsulfone. Diamines of different lengths with a general formula NH2-(CH2)n-NH2 (n = 2, 4, and 6) were used as spacers between the PVA cryogel and the peptide. A model reaction of enzymatic attachment of the Dnp-Ala-Ala-Leu-OMe tripeptide to the PVA cryogel was carried out by treatment with the SDS-SK complex in a mixture of anhydrous ethanol and DMSO (7: 3, v/v) using a tenfold excess of the carboxyl component. The molar enzyme-substrate ratio was 1 : 88. The effect of the method of matrix activation, length of a spacer, and reaction time on the coupling efficiency was studied. Hexamethylenediamine was found to be the most effective spacer for the enzymatic coupling on the PVA cryogel activated with glutaraldehyde (the reaction proceeded with the highest yield of 60%). The reaction efficiency was considerably lower in the case of ethylenediamine and tetramethylenediamine (10 and 15%, respectively). The best results were obtained on the PVA cryogel activated by divinylsulfone with hexamethylenediamine as a spacer. A two-step condensation of tripeptides was carried out on this supportsupport. The second step of condensation was shown to proceed better (in 85% yield) in comparison with the first step (37% yield).