Novozyme 435-catalyzed efficient acylation of 3-n-butylphthalide in organic medium

Novozyme 435 could catalyze efficient acylation of 3-n-butylphthalide in organic medium. The conversion of 3-n-butylphthalide increased with the increase of hydrophobicity of solvent below that of hexane. The more available solvent was hexane. Salt hydride could control fixed water activity. The optimum water activity was 0.62. And the optimum of reaction time, velocity of agitation, dosage of Novozyme 435 and acetic anhydride to 3-n-butylphtrhalide molar ratio were 48 hours, 150 rpm, 8 mg/mL and 8:1, respectively. The conversion of 48.9% could be obtained at a water activity of 0.62 in hexane. Furthermore, Novozyme 435 had an enantioselective acylation of racemic 3-n-butylphthalide by original analysis.     

Novozyme 435-Catalyzed Asymmetric Acylation of (R,S)-3-n-Butylphthalide in Hexane

Abstract

The asymmetric acylation of (R, S)-3-n-butylphthalide could be efficiently catalyzed by Novozyme 435. The effect of various reaction parameters such as water activity, temperature, molar ratio of acetic anhydride to (R, S)-3-n-butylphthalide, and reaction time on the asymmetric acylation were studied. The optimums of the reaction parameters were water activity 0.62, temperature 30°C, molar ratio of acetic anhydride to (R, S)-3-n-butylphthalide 8:1, and reaction time 48 h, respectively. Under the optimum conditions, enantiopure 3-n-butylphthalide with an optical purity of 95.7% enantiomeric excess and 49.1% yield could be obtained. Furthermore, the enantiomeric excess of product was over 98%.     

An efficient system for the asymmetric acylation of (R,S)-3-n-butylphthalide catalyzed by novozyme 435

Novozyme 435 could be a highly efficient catalyst in the asymmetric acylation of (R,S)-3-n-butylphthalide in tetrahydrofuran-hexane solvents. The effect of various reaction parameters such as agitation velocity, water content, mixed media, temperature, concentration of Novozyme 435, molar ratio of acetic anhydride to (R,S)-3-n-butylphthalide, reaction time, enantiomeric excess of substrate (ee(S)), enantiomeric excess of product (ee(P)), and enantioselective ratio (E) were studied. Tetrahydrofuran markedly improved (R,S)-3-n-butylphthalide conversion, enantiomeric excess of remaining 3-n-butylphthalide, and enantiomeric ratio. The optimum media were 50% (v/v) tetrahydrofuran and 50% (v/v) hexane. Other ideal reaction conditions were an agitation velocity of 150 rpm, 0.4% (v/v) water content, temperature of 30 °C, 8 mg/mL dosage of Novozyme 435, 8:1 (0.4 mmol: 0.05 mmol) molar ratio of acetic anhydride to (R,S)-3-n-butylphthalide, and a reaction time of 48 hr. Under the optimum conditions, 96.4% ee(S) and 49.3% conversion of (R,S)-3-n-butylphthalide were achieved. In addition, enantiomeric excess of the product was above 98.0%.     

AN EFFICIENT SYSTEM FOR THE ASYMMETRIC ACYLATION OF (R,S)-3-n-BUTYLPHTHALIDE CATALYZED BY NOVOZYME 435

Novozyme 435 could be a highly efficient catalyst in the asymmetric acylation of (R,S)-3-n-butylphthalide in tetrahydrofuran–hexane solvents. The effect of various reaction parameters such as agitation velocity, water content, mixed media, temperature, concentration of Novozyme 435, molar ratio of acetic anhydride to (R,S)-3-n-butylphthalide, reaction time, enantiomeric excess of substrate (ee_S), enantiomeric excess of product (ee_P), and enantioselective ratio (E) were studied. Tetrahydrofuran markedly improved (R,S)-3-n-butylphthalide conversion, enantiomeric excess of remaining 3-n-butylphthalide, and enantiomeric ratio. The optimum media were 50% (v/v) tetrahydrofuran and 50% (v/v) hexane. Other ideal reaction conditions were an agitation velocity of 150 rpm, 0.4% (v/v) water content, temperature of 30°C, 8 mg/mL dosage of Novozyme 435, 8:1 (0.4 mmol: 0.05 mmol) molar ratio of acetic anhydride to (R,S)-3-n-butylphthalide, and a reaction time of 48 hr. Under the optimum conditions, 96.4% ee_S and 49.3% conversion of (R,S)-3-n-butylphthalide were achieved. In addition, enantiomeric excess of the product was above 98.0%.     

Highly regioselective enzymatic synthesis of 5′-O-stearate of 1-β-D-arabinofuranosylcytosine in binary organic solvent mixtures

In this paper, highly regioselective enzymatic acylations of 1-β-D-arabinofuranosylcytosine (ara-C) with vinyl stearate (VS) in binary organic solvents were explored for the preparation of 5′-O-stearate of ara-C with potential antitumor activity. Twelve kinds of hydrolases were tested for the regioselective acylation reaction and the immobilized Candida antarctica lipase B (Novozym 435) showed the highest regioselectivity (>99.9%) towards the 5′-OH of ara-C. A comparative study showed that the lipase had much higher catalytic activity in the binary mixture of hexane and pyridine than in other tested co-solvent systems. To better understand lipase-mediated acylation conducted in the best binary organic solvent system, the effects of hydrophobic solvent content, molar ratio of VS to ara-C, initial water activity, and reaction temperature on the acylation reaction were studied. It was found that the most suitable hexane content, VS–ara-C molar ratio, initial water activity, and reaction temperature were shown to be 25% (v/v), 20:1, 0.07, and 50°C, respectively. Under these reaction conditions, the initial reaction rate, the maximum substrate conversion, and regioselectivity were as high as 86.0 mmol·L⁻¹h⁻¹, 96.6%, and >99.9%, respectively. The product of Novozym 435-catalyzed acylation was characterized by Carbon-13(¹³C) NMR and confirmed to be 5′-O-stearate of ara-C.     

Lipase-catalyzed esterification of rutin and naringin with fatty acids of medium carbon chain

Flavonoids rutin and naringin were acylated with fatty acids of medium carbon chain (with 8–12 carbon atoms on their molecule) in a reaction catalyzed by immobilized lipase from Candida antarctica (Novozyme) in various solvent systems. The reaction parameters affecting the acylation rate and the conversion of the enzymatic process, such as the nature of the organic solvent and acyl donor used, the water activity (a_w) of the system, as well as the kinetic of the reaction have been investigated. In all cases studied, only flavonoid monoester is identified as the product, which indicates that this lipase-catalyzed esterification is regioselective. The enzymatic acylation of flavonoids seems to follow Michaelis–Menten kinetics.     

Improved enantioselective hydrolysis of racemic ethyl-2,2-dimethylcyclopropanecarboxylate catalyzed by modified Novozyme 435

S-(+)-2,2-dimethylcyclopropanecarboxylic acid (S-(+)-DMCPA) is a key chiral intermediate for the synthesis of Cilastatin. The enzymatic preparation of S-(+)-DMCPA has attracted much attention. In order to improve the activity and stability of Novozyme 435 for enzymatic preparation of S-(+)-DMCPA from 2,2-dimethylcyclopropane carboxylate (DMCPE), the glutaraldehyde modification for Novozyme 435 was investigated and the glutaraldehydemodified Novozyme 435 was used as biocatalyst for the synthesis of S-(+)-DMCPA. The results showed that the modified Novozyme 435 had a better reusing merit than unmodified enzyme. The maximum specific activity was obtained by modification Novozyme 435 with 1.5% glutaraldehyde solution under the conditions of shaking at 200 rpm and 30°C for 45 min. The optimal enzymatic hydrolysis conditions for glutaraldehyde-modified Novozyme 435 were also confirmed. The optimized hydrolytic reaction mixture contained 10 mL potassium phosphate buffer (1.0 mol/L, pH 7.6), 90 mg of DMCPE and 160 mg of glutaraldehyde-modified enzyme, and the reaction was performed at 30oC and 200 rpm for 52 h. The reusing efficiency of modified Novozyme 435 was further evaluated. Under the optimal conditions, the modified enzyme remained 76.0% of its original yield after 10 times reuse, but the optical purity of the product kept intact; whereas the yield of unmodified enzyme reduced to 20.8% of its initial value and the ee value of product decreased a lot to 90.7% after 7 times recycle. These results showed that the modified Novozyme 435 was more cost-effective for the preparation of S-(+)-DMCPA in industrial application.     

Biocatalytic synthesis of poly(ε‐caprolactone) using modified lipase in ionic liquid media

Ionic liquids have been used as exceptional nonaqueous reaction media for enzymatic transformation. The ring‐opening polymerization of ε‐caprolactone catalyzed by Novozyme‐435 lipase was successfully conducted in 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([Bmim]PF₆) ionic liquid. ¹H‐NMR and MALDI‐TOF analyses of poly(ε‐caprolactone) (PCL) formed by Novozyme‐435 lipase‐catalyzed reaction revealed an asymmetric telechelic α‐hydroxy‐ω‐carboxylic acid end group. The effects of enzyme concentration, temperature, reaction time, and water activities on monomer conversion and M_n were systematically evaluated. Through the optimization of reaction conditions, PCL was produced in 85% monomer conversion, with an M_n of 5942, in [Bmim]PF₆ at 60°C for 48 h. DSC results demonstrated that high‐molecular‐weight PCL exhibited an excellent thermal property. SEM results showed that PCL had a clear spherulites structure, which could provide a large surface area for cell adhesion. These results showed that [Bmim]PF₆ ionic liquid was suitable for the biocatalytic synthesis of PCL using Novozyme‐435 lipase, and could be used as alternative environmentally friendly media to replace the traditional organic solvents.     

A kinetic study on the Novozyme 435‐catalyzed esterification of free fatty acids with octanol to produce octyl esters

Octyl esters can serve as an important class of biolubricant components replacing their mineral oil counterparts. The purpose of the current work was to investigate the enzymatic esterification reaction of free fatty acids (FFA, from waste cooking oil) with octanol in a solvent‐free system using a commercial lipase Novozyme 435. It was found that the esterificaton reaction followed the Ping‐pong bi‐bi kinetics with no inhibition by substrates or products within the studied concentration range. The maximum reaction rate was estimated to be 0.041 mol L^?1 g^?1 h^?1. Additionally, the stability of Novozyme 435 in the current reaction system was studied by determining its activity and final conversion of FFA to esters after 12 successive utilizations. Novozyme 435 exhibited almost 100% enzyme activity up to 7 cycles of reaction and gradually decreased (by 5%) thereafter. The kinetic parameters evaluated from the study shall assist in the design of reactors for large‐scale production of octyl esters from a cheap biomass source. The enzyme reusability data can further facilitate mass production by curtailing the cost of expensive enzyme consumption. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:1494–1499, 2015     

Efficient synthesis of 5′-O-laurate of 1-β-d-arabinofuranosylcytosine via highly regioselective enzymatic acylation in binary solvent mixtures

Regioselective enzymatic acylations of 1-β-d-arabinofuranosylcytosine (ara-C) with vinyl laurate (VL) in binary organic solvents were explored for the preparation of 5′-O-laurate of ara-C. Among the nine kinds of enzymes, Novozym 435 showed the highest regioselectivity (>99.9%) towards the 5′-OH of ara-C. This lipase showed higher catalytic activity in hexane–pyridine than in other tested solvent mixtures. The most suitable VL to ara-C molar ratio, initial water activity, and reaction temperature were shown to be 15:1, 0.07, and 50 °C, respectively, under which the initial reaction rate and the maximum substrate conversion were as high as 84.0 mmol L^?1 h^?1 and 98.1%, respectively. The product of Novozym 435-catalyzed acylation was characterized by ¹³C NMR and confirmed to be 5′-O-laurate of ara-C.     

Sonochemical enzyme-catalyzed regioselective acylation of flavonoid glycosides

This work compares a highly efficient and alternative method of sonication-assisted lipase catalyzed acylation of quercetin-3-O-glucoside and phloretin-2′-glucoside, using Candida antarctica lipase B (Novozyme 435^®), with a range of fatty acids. In this study, sonication-assisted irradiation coupled with stirring has been found to be more efficient and economical than conventional reaction conditions. Sonication-assisted acylation accelerated the reactions and reduced the time required by 4–5 folds.     

Lipase of <Emphasis Type="Italic">Aspergillus niger</Emphasis> NCIM 1207: A Potential Biocatalyst for Synthesis of Isoamyl Acetate

Commercial lipase preparations and mycelium bound lipase from Aspergillus niger NCIM 1207 were used for esterification of acetic acid with isoamyl alcohol to obtain isoamyl acetate. The esterification reaction was carried out at 30°C in n-hexane with shaking at 120 rpm. Initial reaction rates, conversion efficiency and isoamyl acetate concentration obtained using Novozyme 435 were the highest. Mycelium bound lipase of A. niger NCIM 1207 produced maximal isoamyl acetate formation at an alcohol/acid ratio of 1.6. Acetic acid at higher concentrations than required for the critical alcohol/acid ratio lower than 1.3 and higher than 1.6 resulted in decreased yields of isoamyl acetate probably owing to lowering of micro-aqueous environmental pH around the enzyme leading to inhibition of enzyme activity. Mycelium bound A. niger lipase produced 80 g/l of isoamyl acetate within 96 h even though extremely less amount of enzyme activity was used for esterification. The presence of sodium sulphate during esterification reaction at higher substrate concentration resulted in increased conversion efficiency when we used mycelium bound enzyme preparations of A. niger NCIM 1207. This could be due to removal of excess water released during esterification reaction by sodium sulphate. High ester concentration (286.5 g/l) and conversion (73.5%) were obtained within 24 h using Novozyme 435 under these conditions.     

Novozym 435-catalyzed regioselective benzoylation of 1-β-d-arabinofuranosylcytosine in a co-solvent mixture of C4MIm·PF6 and pyridine

Regioselective acylation of 1-β-d-arabinofuranosylcytosine (ara-C), using vinyl benzoate (VB) as acyl donor and Novozym 435 as catalyst, was carried out in various reaction media including pure organic solvents, organic solvent mixtures, and ionic liquid (IL)-containing systems. Although the reaction was highly regioselective in all the media assayed, remarkable enhancement of substrate conversion was achieved with a co-solvent mixture of 1-butyl-3-methylimidazolium hexafluorophosphate (C₄MIm·PF₆) and pyridine as the reaction medium, compared with other media tested. Additionally, the results demonstrated that the anions of ILs had a significant effect on the initial rate and substrate conversion. To better understand the reaction performed in IL-containing system, several variables were examined. The optimum molar ratio of VB to ara-C, initial water activity, temperature and shaking rate were 25:1, 0.11, 40°C and 250rpm, respectively. Under these optimum reaction conditions, the initial rate, substrate conversion, and regioselectivity were 0.49mMmin^?1, 99.4 and 99%, respectively. The product of the lipase-catalyzed reaction was characterized by ¹³C NMR and was shown to be 5′-O-benzoyl ara-C.     

Markedly improving Novozym 435-mediated regioselective acylation of 1-beta-D-arabinofuranosylcytosine by using co-solvent mixtures as the reaction media

A comparative study was made of Novozym 435-catalyzed regioselective acylation of 1-beta-D-arabinofuranosylcytosine with vinyl propionate for the preparation of the 5'-O-monoester in eleven co-solvent mixtures and three pure polar solvents. Novozym 435 displayed low or no acylation activity toward 1-beta-D-arabinofuranosylcytosine in pure polar solvents, although those solvents can dissolve the nucleosides well. When a hexane-pyridine co-solvent system was adopted, both the initial rate and the substrate conversion were enhanced markedly. The polarity of co-solvent mixtures had significant effect on the reaction. Among the solvent mixtures investigated, the higher the polarity of the solvent mixture, the lower the initial reaction rate and the substrate conversion. It was also found that the acylation was dependent on the hydrophobic solvent content, the water activity and the reaction temperature. The most suitable co-solvent, initial water activity, and reaction temperature were hexane-pyridine (28:72, v/v), 0.07, and 50 degrees C, respectively. Under these conditions, the initial rate, the substrate conversion and the regioselectivity were as high as 91.1 mM h(-1), >97% and >98%, respectively, after a reaction time of 6 h. Among the reaction mediums examined, the lowest apparent activation energy was achieved with hexane-pyridine (28:72, v/v), in which Novozym 435 also exhibited good thermal stability.     

Biosynthesis of glycerol carbonate from glycerol by lipase in dimethyl carbonate as the solvent

Glycerol carbonate was synthesized from renewable glycerol and dimethyl carbonate using lipase in solvent-free reaction system in which excess dimethyl carbonate played as the reaction medium. A variety of lipases have been tested for their abilities to catalyze transesterification reaction, and Candida antartica lipase B and Novozyme 435 exhibited higher catalytic activities. The silica-coated glycerol with a 1:1 ratio was supplied to prevent two-phase formation between hydrophobic dimethyl carbonate and hydrophilic glycerol. Glycerol carbonate was successfully synthesized with more than 90% conversion from dimethyl carbonate and glycerol with a molar ratio of 10 using Novozyme 435-catalyzed transesterification at 70 °C. The Novozyme 435 [5% (w/w) and 20% (w/w)] and silica gel were more than four times recycled with good stability in a repeated batch operation for the solvent-free synthesis of glycerol carbonate.     

有机相脂肪酶催化合成乙酸肉桂酯

对有机相中酶法催化合成乙酸肉桂酯的转酯化反应进行研究。结果发现:Candida anatarctic脂肪酶(Novozyme435)、根霉脂肪酶(Rhizopus niveus lipase)和荧光假单胞菌脂肪酶(Pseudomonas fluore lipase)均有较好的催化活性。同时考察各反应参数(温度、反应溶剂、体系水活度、酰化剂类型、肉桂醇与酰化剂摩尔比、肉桂醇浓度等)对脂肪酶Novozyme435合成乙酸肉桂酯反应的影响,确定了反应体系最优工艺条件:在10 mL甲基叔丁基醚中,肉桂醇200 mmol/L,n(肉桂醇)∶n(乙酸乙烯酯)=1∶1.5,初始水活度αw=0.84,温度35℃,酶加量0.02 g,反应3 h后肉桂醇转化率可达到99%,产物经质谱(MS)鉴定。固定化酶经过10个批次反应,反应转化率都保持在90%以上。     

Evaluation of factors influencing the enantioselective enzymatic esterification of lactic acid in ionic liquid

In this paper esterification of ethanol and lactic acid catalyzed by Candida antarctica B (Novozyme 435) in ionic liquid (Cyphos 104) was studied. The influence of different variables on lipase enantioselectivity and lactic acid conversion was investigated. The variables investigated were ionic liquid mass/lipase mass ratio, water content, alcohol excess and temperature. Using the Design Expert software 2³ factorial experimental plan (two levels, three factors) was performed to ascertain the effect of selected variables and their interactions on the ethyl lactate enantiomeric excess and lactic acid conversion. The results of the experiments and statistical processing suggest that temperature and alcohol excess have the highest effect on the ethyl lactate enantiomeric excess, while temperature and water content have the highest influence on the lactic acid conversion. The statistical mathematical model developed on the basis of the experimental data showed that the highest enantiomeric excess achieved in the investigated variable range is 34.3%, and the highest conversion is 63.8% at the initial conditions of water content at 8%; 11-fold molar excess of alcohol and temperature at 30 °C.     

Hydroxy functional acrylate and methacrylate monomers prepared via lipase—catalyzed transacylation reactions

Candida antarctica lipase B (CAL-B, Novozyme 435) catalyzes the transacylation of methyl acrylate and methyl methacrylate with diols and triols in 2-methyl-2-butanol at 50 °C. Under the experimental conditions, up to 70 mol% of the acyl donor methyl acrylate was converted. Methyl methacrylate is the less efficient acyl donor (up to 60 mol%) due to the higher sterical hindrance in the enzymatic transacylation. Under the reaction conditions high yields of the mono-acylated products are obtained, which contain minor amounts of bis(meth)acrylates. In addition it was observed that Novozyme 435 catalyzes regioselectively the acylation of the primary hydroxyl groups. In comparison with the chemical catalyzed route no selectivity was observed for unsubstituted diols. For substituted diols more mono-acylated product was formed in the lipase-catalyzed reaction than in the chemical catalyzed reaction.     

Kinetic resolution of drug intermediates catalyzed by lipase B from Candida antarctica immobilized on immobead‐350

Novozyme 435, which is a commercial immobilized lipase B from Candida antarctica (CALB), has been proven to be inadequate for the kinetic resolution of rac‐indanyl acetate. As it has been previously described that different immobilization protocols may greatly alter lipase features, in this work, CALB was covalently immobilized on epoxy Immobead‐350 (IB‐350) and on glyoxyl‐agarose to ascertain if better kinetic resolution would result. Afterwards, all CALB biocatalysts were utilized in the hydrolytic resolution of rac‐indanyl acetate and rac‐(chloromethyl)‐2‐(o‐methoxyphenoxy) ethyl acetate. After optimization of the immobilization protocol on IB‐350, its loading capacity was 150 mg protein/g dried support. Furthermore, the CALB‐IB‐350 thermal and solvent stabilities were higher than that of the soluble enzyme (e.g., by a 14‐fold factor at pH 5–70°C and by a 11‐fold factor in dioxane 30%–65°C) and that of the glyoxyl‐agarose‐CALB (e.g., by a 12‐fold factor at pH 10–50°C and by a 21‐fold factor in dioxane 30%–65°C). The CALB‐IB‐350 preparation (with 98% immobilization yield and activity versus p‐nitrophenyl butyrate of 6.26 ± 0.2 U/g) was used in the hydrolysis of rac‐indanyl acetate using a biocatalyst/substrate ratio of 2:1 and a pH value of 7.0 at 30°C for 24 h. The conversion obtained was 48% and the enantiomeric excess of the product (e.e._p) was 97%. These values were much higher than the ones obtained with Novozyme 435, 13% and 26% of conversion and e.e.p, respectively. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:878–889, 2018     

Influence of substituents on enantiomeric ratio in transesterification of racemic C-3 synthons using lipase B from Candida antarctica

The fluorides, chlorides and bromides of 3-halo-1-phenoxy-2-propanol, 3-halo-1-phenylmethoxy-2-propanol and 3-halo-1-(2-phenylethoxy)-2-propanol have been resolved by transesterification with various butanoates as acyl donors in hexane and lipase B from Candida antarctica (Novozyme 435) as catalyst. The enantiomeric ratio E depended on the hydroxy protecting groups in 1-position and the halogens in 3-position. For some substrates, the enantiomeric ratio was dependent on the acylating agent.