Synthesis, characterization and thermal sensitivity of chitosan-based graft copolymers

Novel chitosan-based graft copolymers (CECTS-g-PDMA) were synthesized through homogeneous graft copolymerization of (N,N-dimethylamino)ethyl methacrylate (DMA) onto N-carboxyethylchitosan (CECTS) in aqueous solution by using ammonium persulfate (APS) as the initiator. The effect of polymerization variables, including initiator concentration, monomer concentration, reaction time and temperature, on grafting percentage was studied. XRD, FTIR, DSC and TGA were used to characterize the graft copolymers. Surface-tension measurements, turbidity measurements and temperature-variable (1)H NMR analysis were combined to investigate the thermal sensitivity of CECTS-g-PDMAs in aqueous solution.     

Photoinduced graft-copolymer synthesis and characterization of methacrylic acid onto natural biodegradable lignocellulose fiber

UV radiation induced graft copolymerization of methacrylic acid onto natural lignocellulose (jute) fiber was carried out both by "simultaneous irradiation and grafting" and by preirradiation methods using 1-hydroxycyclohexyl-phenyl ketone as a photoinitiator. In the "simultaneous irradiation and grafting" method, the variation of graft weight with UV-radiation time, monomer concentration, and the concentration of photoinitiator was investigated. In the case of the preirradiation method, the incorporation of 2-methyl-2-propene 1-sulfonic acid, sodium salt, into the grafting reaction solution played a most important role in suppressing the homopolymer/gel formation and facilitating graft copolymerization. The optimum value of the reaction parameters on the percentage of grafting was evaluated. In comparison, results showed that the method of graft-copolymer synthesis has significant influence on graft weight. The study on the mechanical and thermal properties of grafted samples was conducted. The results showed that the percentage of grafting has a significant effect on the mechanical and thermal properties in the case of grafted samples. Considering the water absorption property, the jute-poly(methacrylic acid)-grafted sample showed a maximum up to 42% increase in hydrophilicity with respect to that of the "as received" sample. Attenuated total reflection infrared studies indicate that the estimation of the degree of grafting could be achieved by correlating band intensities with the percent graft weight.     

Synthesis and characterization of hydroxypropyl methylcellulose and ethyl acrylate graft copolymers

The synthesis of hydroxypropyl methylcellulose-g-poly (ethyl acrylate) was carried out by potassium persulfate induced graft copolymerization in homogeneous aqueous medium. By varying the reaction conditions, graft copolymers with different percentage of grafting were prepared. These graft copolymers were characterized by fourier transform infrared spectra (FTIR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetric analyses (TGA), X-ray diffraction analysis (XRD), and dynamic light scattering (DLS) methods. The molecular weight of grafted and ungrafted polymer chains determined by gel permeation chromatography (GPC) increased with increasing monomer and matrix concentration but decreased with increasing initiator concentration and reaction temperature. The mechanical properties of graft copolymers were measured as function of the percentage of grafting. In addition, the equilibrium humidity adsorption behavior and the disintegration time of the grafted copolymer films were also studied.     

Functionalization of cellulosic fibers by graft copolymerization of acrylonitrile and ethyl acrylate from their binary mixtures

Functionalization of Agave fibers was carried out by graft copolymerization of acrylonitrile (AN) and ethyl acrylate (EA) from their binary solutions in presence of Ce (IV) ions at a temperature of 45 ± 0.1 °C. An increase in the graft copolymerization was obtained with the increase in the feed molarity of the comonomers up to certain extent. Contrary to lesser affinity of acrylonitrile to grafting on Agave fibers, a synergistic effect of ethyl acrylate on acrylonitrile was observed when graft copolymers were prepared using different feed compositions (f_AN). The graft copolymers were characterized by various techniques such as FT-IR, TGA/DTA, X-RD and SEM analysis. Further swelling behavior of grafted fibers in different solvents, moisture absorption behavior and resistance to chemicals was investigated as a function of percent grafting to define their end uses in different environments.     

Preparation of cassava starch grafted with polystyrene by suspension polymerization

Cassava starch grafted with polystyrene (PS-g-starch) copolymer was synthesized via free-radical polymerization of styrene by using suspension polymerization technique. Potassium persulfate (PPS) was used as an initiator and water was used as a medium. The graft copolymer was characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermal gravimetric analysis, X-ray diffraction and scanning electron microscopy. The sub-micron spherical beads of PS were observed on the surface of starch granules. SEM micrographs showed porous patches of PS adhering on the starch granules after Soxhlet extraction. FTIR spectra also indicated the presence of PS-g-starch copolymer. XRD analysis exhibited insignificant changes in crystalline structure and degree of crystallinity. The effects of starch:styrene weight ratio, amount of PPS, reaction time and reaction temperature on the percentage of grafting – G (%), were investigated. G (%) increased with increasing starch content. Other variables showed their own individual optimal values. The optimum condition yielding 31.47% of G (%) was derived when the component ratio was 1:3 and reaction temperature and time were 50 °C and 2 h, respectively. Graft copolymerization did not change granular shape and crystallinity of starch. This study demonstrated the capability of polymerization of styrene monomer on the granular starch without emulsifier and the synthesis of graft copolymer without gelatinization of starch.     

Temperature-responsive cellulose by ceric(IV) ion-initiated graft copolymerization of N-isopropylacrylamide

Temperature-responsive cellulose has been obtained by graft copolymerization of N-isopropylacrylamide (NIPAAm) monomer using ceric ammonium nitrate (CAN) as initiator at 25.0 +/- 0.1 degrees C in acidic medium. Kinetic and grafting parameters were evaluated at different concentrations of NIPAAm ranging from 1.25 x 10(-3) to 12.5 x 10(-3) mol dm(-3) and varying concentrations of CAN from 1.5 x 10(-3) to 9.0 x 10(-3) mol dm(-3) at constant concentration of nitric acid (2.5 x 10(-2) mol dm(-3)). The graft copolymerization of NIPAAm onto cellulose has shown a significant increasing trend below lower critical solution temperature (LCST) of poly(N-isopropylacrylamide) (PNIPAAm) and shown low energy of activation (18.0 kJ mol(-1)) for graft copolymerization within the temperature range of 10-35 degrees C as determined with Arrhenius plot. The PNIPAAm-grafted cellulose has shown improved thermal stability and shown temperature-dependent degree of swelling. Variation in degree of swelling of PNIPAAm-grafted cellulose as a function of temperature has been used to determine LCST of PNIPAAm-grafted cellulose. The contact angle (theta) has shown variation on increasing the graft yield and temperature. On the basis of experimental observations, the reaction steps for graft copolymerization have been proposed and a rate expression has been derived.     

Modification of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) film by chemical graft copolymerization

The graft copolymerization of 2-hydroxyethylmethacrylate (HEMA) onto poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) films has been investigated. The graft copolymerization was conducted in aqueous media using benzoyl peroxide (BPO) as chemical initiator. PHBHV films were prepared by solvent casting. Different parameters affecting the graft yield were studied such as monomer concentration, initiator concentration, and reaction time. The extent of grafting has been modulated by the preparation conditions, in particular the concentration of HEMA. However, it is interesting to note that the initiator concentration had only a slight influence on the graft yield. Characterization of the grafted PHBHV films assumed that the graft copolymerization not only occurred on the film surface but also took place into the film bulk. Differential scanning calorimetry showed that crystallinity dramatically decreased with increasing graft yield, indicating that graft copolymerization hindered the crystallization process. Wettability has been obviously improved by grafting a hydrophilic monomer such as HEMA for high graft yield (>130%).     

Graft copolymerization of methyl methacrylate onto mercaptochitin and some properties of the resulting hybrid materials

The graft copolymerization of methyl methacrylate onto mercaptochitin and some properties of the resulting graft copolymers have been studied. Methyl methacrylate was efficiently graft copolymerized onto mercaptochitin in dimethyl sulfoxide, and the grafting percentage reached 1300% under appropriate conditions. Although the side-chain ester groups were resistant to aqueous alkali, hydrolysis could be achieved with a mixture of aqueous sodium hydroxide and dimethyl sulfoxide. Subsequent treatment with acetic anhydride in methanol transformed the sodium carboxylate groups into carboxyl groups. Although the graft copolymers exhibited an improved affinity for organic solvents, those having sodium carboxylate or carboxyl units were characterized by a much more enhanced solubility and were soluble in common solvents. The hygroscopic nature of chitin decreased with an increase in the grafting extent but increased significantly upon hydrolysis of the ester groups. The enzymatic degradability of the graft copolymers, as evaluated with lysozyme, was also dependent on the grafting extent and much higher than that of the original chitin. DSC measurements revealed the presence of a glass transition phenomenon, which could be ascribed to the poly(methyl methacrylate) side chain.     

Preparation of a thermosensitive highly regioselective cellulose/N-isopropylacrylamide copolymer through atom transfer radical polymerization

Regioselective copolymerization of N-isopropylacrylamide (NIPAM) onto cellulose was achieved by atom transfer radical polymerization (ATRP) using a regioselectively modified 6- O-bromoisobutyryl-2,3-di- O-methyl cellulose macroinitiator. Varying the ratio of NIPAM to macroinitiator to ligand to transition metal in a Cu(I)Br/ N, N, N', N', N'-pentamethyldiethylenetriamine (PMDETA) catalyst system affected graft yield and degree of polymerization. ATRP proceeded to completion without any trace of the macroinitiator, and a degree of polymerization (DP) of polyNIPAM up to 46.3 was obtained. Increasing the DP of the NIPAM component increased both the thermal decomposition temperature and the glass transition temperature of the copolymer. The grafting of NIPAM also affected the solubility properties of the methylcellulose. The 6- O-polyNIPAM-2,3-di- O-methyl cellulose formed a stable suspension in water at room temperature and underwent a hydrophillic-to-hydrophobic transition and copolymer precipitation when the temperature was raised above 30 degrees C.     

Syntheses and characterisation of graft copolymers of maize starch and methacrylonitrile

Grafting of methacrylonitrile (MAN) onto dried maize starch using ceric ammonium nitrate (CAN) as an initiator has been studied gravimetrically under nitrogen atmosphere in aqueous medium. The percentage grafting is favoured by increasing monomer concentration and reaction time but is affected by higher concentration of initiator and high temperature. No grafting was observed beyond 45°C. The optimum conditions established for grafting were: [CAN]=0.002 mol/l which was added in molar nitric acid; [MAN]=0.755 mol/l; reaction time, 180 min; and temperature, 35°C. The graft copolymers were analyzed by infrared spectroscopy and acid hydrolysis. The grafting of methacrylonitrile onto starch does not alter the thermal stability of starch. The crystalline region of starch was also involved in grafting. Scanning electron microscopy showed a thick polymer coating of grafted PMAN on the starch surface.     

Graft copolymerization of ethyl acrylate onto cellulose using ceric ammonium nitrate as initiator in aqueous medium

Ceric ammonium nitrate (CAN) in the presence of nitric acid has been used as efficient initiator for graft copolymerization of the ethyl acrylate onto cellulose at 35.0 +/- 0.1 degrees C. Graft copolymerization of ethyl acrylate onto cellulose has taken place through the radical initiation process. The graft yield and other grafting parameters have been evaluated by varying concentration of ethyl acrylate from 2.5 x 10(-1) to 15.0 x 10(-1) mol dm(-3) and ceric ammonium nitrate from 5.0 x 10(-3) to 25.0 x 10(-3) mol dm(-3) at constant concentration of the nitric acid (8.0 x 10(-2) mol dm(-3)). The rate of graft copolymerization has shown 1.5 order with respect to the concentration of the ceric ammonium nitrate. The graft copolymerization data obtained at different temperatures were used to calculate the energy of activation, which has been found to be 28.9 kJ mol(-1) within the temperature range from 20 to 50 degrees C. The effect of addition of cationic and anionic surfactants on graft copolymerization has also been studied. On the basis of the experimental observations, reaction steps have been proposed and a suitable rate expression for graft copolymerization has been derived.     

Synthesis and characterization of a brush-like copolymer of polylactide grafted onto chitosan

A brush-like poly(DL)-lactide grafted onto chitosan as the backbone was investigated. The graft copolymerization was carried out with triethylaluminum as catalyst in toluene at 70 degrees C. It was found that a greater lactide content in the feeding ratio results in a higher grafting percentage. FTIR spectrometry, (1)H NMR, DSC scanning, and wide-angle X-ray scattering, respectively, are used to characterize these branch copolymers. A copolymer has a definite melting point when the molar feeding ratio of lactide to chitosan is more than 10:1, and the deltaH of the copolymers increases with the feed ratio of lactide to chitosan in feeding.     

Synthesis and properties of a water soluble graft (chitosan-g-2-acrylamidoglycolic acid) copolymer

The present paper reports the graft copolymerization of 2-acrylamidoglycolic acid onto chitosan by using potassium bromate/silver nitrate as an efficient redox initiator in an inert atmosphere. The effect of reaction conditions on grafting parameters i.e. grafting ratio, efficiency, conversion, add on, homopolymer and rate of grafting has been studied. Experimental results show that maximum grafting has been obtained at 0.4 g dm(-3) concentration of chitosan, 8.0×10(-2) mol dm(-3) concentration of 2-acrylamidoglycolic acid and 1.0×10(-3) mol dm(-3) concentration of hydrogen ion. It has also been observed that grafting ratio, add on, conversion, efficiency and rate of grafting increase up to 3.2×10(-3) mol dm(-3) of silver nitrate and 1.7×10(-2) mol dm(-3) of potassium bromate. Time (120 min) and temperature (40°C) were kept constant during reaction. The physicochemical properties of graft copolymer synthesized have been performed in terms of water swelling, metal ion sorption, flocculation and resistance to biodegradability with respect to the chitosan as a parent polymer. The graft copolymer has been characterized by Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis.     

Preparation of chitosan-g-polycaprolactone copolymers through ring-opening polymerization of epsilon-caprolactone onto phthaloyl-protected chitosan

The new biodegradable chitosan graft copolymer, chitosan-g-polycaprolactone, was synthesized by the ring-opening graft copolymerization of epsilon-caprolactone onto phthaloyl-protected chitosan (PHCS) at the hydroxyl group in the presence of tin(II) 2-ethylhexanoate catalyst via a protection-graft-deprotection procedure. Toluene acted as a swelling agent in this heterogeneous system. The grafting reactions were conducted with various PHCS/monomer/toluene feed ratios to obtain chitosan-g-polycaprolactone copolymers with various polycaprolactone contents. The chemical structure of the chitosan-g-polycaprolactone was characterized by Fourier transform infrared and one- and two-dimensional NMR spectroscopy. After deprotection, the phthaloyl group was removed and the amino group was regenerated. Thus the obtained chitosan-g-polycaprolactone was an amphoteric hybrid with a large amount of free amino groups and hydrophobic polycaprolactone side chains. Some properties of the final product were also investigated, such as crystallinity, thermal property, and solubility.     

The effect of ions on the enzymatically induced synthesis of lignin graft copolymers

The effect of different ions which are constituents of technical lignin sulfonates (LS) on chemo-enzymatic graft co-polymerization was determined. The application of the iron chelator desferrioxamine in the initial reaction mixture revealed that iron impurities of LS which catalyzed a Fenton-like reaction were crucial for the initiation of grafting, whereas calcium or chloride ions showed no such effect. The addition of laccase (ATCC 11235) to the reaction mixture which contained desferrioxamine caused a significantly higher yield compared to the control; this indicates a crucial effect of laccase with regard to the initiation of copolymerization. The involvement of laccase in the initiation of the graft copolymerization was additionally confirmed by the application of low molecular weight phenolics instead of LS. In the presence of the lignin-like substrates, 3,4-dihydroxybenzoic acid and guaiacol, the rate of the decomposition of t-butylhydroperoxide was significantly enhanced by laccase. It can be assumed that the enzymatically generated phenoxy radicals mediate the production of oxygen centered radicals (alkoxy or peroxy) which initiate grafting.     

Xanthan-g-poly(acrylamide): Microwave-assisted synthesis,characterization and in vitro release behavior

Xanthan-g-poly(acrylamide) was synthesized employing microwave-assisted and ceric-induced graft copolymerization, and was characterized by FT-IR, DSC, XRD and SEM studies. Matrix tablets of diclofenac sodium were formulated using graft copolymer as the matrix by direct compression technique. Release behavior of the graft copolymer was evaluated using USP type-II dissolution apparatus in 900 ml of phosphate buffer (pH 6.8), maintained at 37 °C and at 50 rpm. Microwave-assisted grafting provided graft copolymer with higher % grafting in a shorter time in comparison to the ceric-induced grafting. The % grafting was found to increase with the increase in the power of microwave and/or time of exposure. The matrix tablets were found to release the drug by zero-order kinetics, and the faster release of drug was observed from the graft copolymer matrix as compared to the xanthan gum matrix. It was observed that grafting reduces the swelling, but increases the erosion of xanthan gum.     

Synthesis of graft copolymer (CgOH-g-AGA): Physicochemical properties, characterization and application

A graft copolymer of κ-carrageenan and 2-acrylamidoglycolic acid (CgOH-g-AGA) was synthesized via free radical polymerization initiated by potassium peroxymonosulphate/malonic acid redox pair. For affording maximum percentage of grafting, optimum conditions were determined by varying the concentrations of κ-carrageenan, 2-acrylamidoglycolic acid, potassium peroxymonosulphate, malonic acid, hydrogen ion, time and temperature. The swelling, metal ion uptake and flocculation studies were investigated with water, three metals (Ni(2+), Pb(2+) and Zn(2+)) solutions, coal (coking and non-coking) suspensions, respectively. Both, polymer backbone and its corresponding graft copolymer samples were characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis.     

Graft copolymerization of acrylic acid to cassava starch-Evaluation of the influences of process parameters by an experimental design method

The graft copolymerization of cassava starch with acrylic acid was investigated using a free radical initiator system (Fe(2+)/H(2)O(2) redox system) in water. A comprehensive understanding of the important variables and their interaction has been obtained by applying an experimental design method. In this approach, two ('high' and 'low') values of selected variables are considered. Important result parameters are add-on and the grafting efficiency. Out of eight reaction variables, it was found that only temperature, starch concentration and the starch to monomer ratio have a pronounced influence on these response parameters. Moderate reaction temperature (40°C) and high starch concentration (10%) give relatively good results of add-on and grafting efficiency. A low starch to monomer ratio favors add-on but decreases grafting efficiency. These findings can be used to optimize the production of cassava starch-acrylate copolymers and to gain insight in the process-product property interactions, for various applications.     

Graft copolymers of starch and its application in textiles

The graft copolymerization of styrene (ST), methyl methacrylate (MMA)/butyl acrylate (BA) with starch was carried chemically using ferrous ion-peroxide redox system. The grafting was performed at 60 °C and the monomer ratios of ST/MMA and ST/BA was varied with their % composition as 80/20, 50/50 and 20/80 parts by weight. The effect of initiator concentration, starch concentration and the monomer ratio on the grafting efficiency was studied. The grafted starch granules (GSG) were further analyzed for their particle size, bulk density and by sizing on cotton yarn for its physico-mechanical properties such as tensile strength, elongation at break, etc. The rheological properties of the resulting granular product in water as well as the starch graft copolymer emulsion were studied.     

Synthesis of partly debranched starch-g-poly(2-acryloyloxyethyl trimethyl ammonium chloride) catalyzed by horseradish peroxidase and the effect on adhesion to polyester/cotton yarn

We performed a dual-modification of starch via debranching and graft copolymerization to improve its adhesion to fibers. We synthesized the partly debranched starch-g-poly(2-acryloyloxyethyl trimethyl ammonium chloride) (PDS-g-PATAC) using horseradish peroxidase in the presence of hydrogen peroxide and acetylacetone. PDSs of different molecular structures were prepared by debranching waxy cornstarch for different periods of time. With increasing debranching time, the degree of hydrolysis of PDS increased from 0.85 % (10 min) to 1.13 % (30 min), while the degree of branching decreased from 8.37 % to 7.99 %. Fourier transform infrared analysis confirmed that ATAC units had been successfully grafted onto the starch (debranched or not debranched). The degree of substitution (DS) and grafting ratio (GR) of the PDS-g-PATACs were characterized by ¹H nuclear magnetic resonance. The DS and GR of grafted starches positively related with debranching time. Thermogravimetry-differential thermogravimetry analysis showed that grafted starch had lower thermal stability than ungrafted starch. The adhesion of PDS-g-PATAC to polyester/cotton yarns was evaluated. The PATAC chains grafted onto the starch enhanced the adhesion of starch to polyester/cotton yarn. The grafted starch produced from the copolymerization of PDS (after debranching for 10 min), exhibited the strongest adhesion to polyester/cotton yarn with a resulting tensile strength of 98.20 N.