Thermal stability and conformation of DNA and proteins under the confined condition in the matrix of hydrogels

Spatially confined environments are seen in biological systems and in the fields of biotechnology and nanotechnology. The confinement restricts the conformational space of polymeric molecules and increasing the degree of molecular crowding. Here, we developed preparation methods for agarose and polyacrylamide gels applicable to UV spectroscopy that can evaluate the confinement effects on DNA and protein structures. Measurements of UV absorbance and CD spectra showed no significant effect of the confinement in the porous media of agarose gels on the base-pair stability of DNA polynucleotides [poly(dA)/poly(dT)] and oligonucleotides (hairpin, duplex, and triplex structures). On the other hand, a highly confined environment created by polyacrylamide gels at high concentrations increased the stability of polynucleotides while leaving that of oligonucleotides unaffected. The changes in the base-pair stability of the polynucleotides were accompanied by the perturbation of the helical conformation. The polyacrylamide gels prepared in this study were also used for the studies on proteins (lysozyme, bovine serum albumin, and myoglobin). The effects on the proteins were different from the effects on DNA structures, suggesting different nature of interactions within the gel. The experimental methods and results are useful to understand the physical properties of nucleic acids and proteins under confined conditions.     

Rapid agarose gel electrophoretic mobility shift assay for quantitating protein: RNA interactions

Interactions between proteins and nucleic acids are frequently analyzed using electrophoretic mobility shift assays (EMSAs). This technique separates bound protein:nucleic acid complexes from free nucleic acids by electrophoresis, most commonly using polyacrylamide gels. The current study utilizes recent advances in agarose gel electrophoresis technology to develop a new EMSA protocol that is simpler and faster than traditional polyacrylamide methods. Agarose gels are normally run at low voltages (∼10 V/cm) to minimize heating and gel artifacts. In this study we demonstrate that EMSAs performed using agarose gels can be run at high voltages (≥20 V/cm) with 0.5 × TB (Tris-borate) buffer, allowing for short run times while simultaneously yielding high band resolution. Several parameters affecting band and image quality were optimized for the procedure, including gel thickness, agarose percentage, and applied voltage. Association of the siRNA-binding protein p19 with its target RNA was investigated using the new system. The agarose gel and conventional polyacrylamide gel methods generated similar apparent binding constants in side-by-side experiments. A particular advantage of the new approach described here is that the short run times (5–10 min) reduce opportunities for dissociation of bound complexes, an important concern in non-equilibrium nucleic acid binding experiments.     

Use of "submarine" gel electrophoresis for running multiple two-dimensional protein gels

An apparatus commonly used for the electrophoresis of submerged agarose gels was used to separate proteins in the second dimension, after isoelectric focusing in the first dimension. Multiple second-dimension gels were stacked one above the other and run horizontally, submerged in the sodium dodecyl sulfate-containing Laemmli buffer system. The reproducibility of the gels run under these conditions is remarkable and eliminates the need for individual vertical electrophoresis units for routine analysis. The units for submerged horizontal gel electrophoresis are easily made or are inexpensively available commercially.     

Solid-state NMR structure determination

Biological applications of solid-state NMR (SS-NMR) have been predominantly in the area of model membrane systems. Increasingly the focus has been membrane peptides and proteins. SS-NMR is able to provide information about how the peptides or proteins interact with the lipids or other peptides/proteins in the membrane, their effect on the membrane and the location of the peptides or proteins relative to the membrane surface. Recent developments in biological SS-NMR have been made possible by improvements in labelling and NMR techniques. This review discusses aligned systems and magic angle spinning techniques, bilayers and bicelles, and measurement of chemical shift anisotropy and dipolar coupling. A number of specific experiments such as cross polarization, rotational resonance, REDOR, PISEMA, MAOSS and multidimensional experiments are described. In addition to 2H, 13C and 15N, recent solid-sate 1H, 19F and 17O NMR work is discussed. Several examples of the use of SS-NMR to determine the structure of membrane peptides and proteins are given.     

Polyacrylamide lamination enables mass spectrometry compatible staining and in-gel digestion of proteins separated by agarose IEF

Agarose IEF enables the separation of large proteins and protein complexes. A complication of agarose gels attached onto polyester support is the lack of sensitive protein staining methods compatible with protein analysis and identification protocols. In this study, agarose IEF gels were used to separate the proteins, followed by layering the agarose with polyacrylamide. The formed laminate gels were seamless and durable and they were readily detached from the polyester. The gels were amenable to MS compatible staining. The sensitivity obtained with the acidic silver staining method was 20-50 ng/band of myoglobin. Laminated agarose was a suitable matrix for in-gel digestion based generation of tryptic peptides for MALDI-MS.     

On the occurrence of ternary complexes in agarose gels as studied by the contrast variation method

The contrast variation method by isotopic labelling as used in small-angle neutron scattering experiments is applied to the case of agarose systems (sol and gels) in order to cast some light on the occurrence of complexes (crystallosolvates). This approach proves to be helpful for giving further support to the existence of ternary complexes in agarose/water/DMSO gels and in agarose/DMSO sols. The results are discussed in the light of temperature-composition phase diagrams established previously.     

A vertical submarine electrophoresis apparatus for polyacrylamide minigels

A vertical submarine electrophoresis apparatus for use with minislab polyacrylamide gels is described. The design allows polyacrylamide gels to be run with the same ease and convenience that agarose gels are run with horizontal submarine apparatuses. The vertical submarine features a single buffer chamber with a restriction between the upper and the lower portions of the chamber. Acrylamide gels, cast between 9 X 10-cm glass slides, are inserted into the restriction and are completely immersed in buffer. Thus, current flows primarily through the gel itself, but some current flows through the buffer in the restriction surrounding the gel. Because water-tight separation of buffer chambers is not necessary, time-consuming and/or expensive procedures such as sealing with agarose or using fragile notched glass plates are eliminated. The apparatus can be set up to run a gel in less than 30 s. It is versatile in that gels of varying thickness (0.5, 0.8, 1.5, and 3 mm) can be run on a single apparatus. The apparatus has been used for sodium dodecyl sulfate gels, low ionic strength native gels for nucleoprotein complexes, and composite acrylamide-agarose gels.     

Glycidol-modified gels for molecular-sieve chromatography. Surface hydrophilization and pore size reduction

Divinyl sulfone-crosslinked agarose gels were made hydrophilic by coupling glycidol to the agarose chains. The concentration of glycidol in the reaction mixture determines the pore size of the gels (the glycidol molecules probably form polymers, the degree of polymerization increasing with the glycidol concentration). Gels prepared with moderate glycidol concentrations are still porous enough to be used for separation of proteins and peptides. Gels with a high degree of glycidol polymerization are suited for desalting of low-molecular-weight compounds, for instance peptides.     

RNA molecular weight determination by agarose gel electrophoresis using formaldehyde as denaturant: comparison of RNA and DNA molecular weight markers

Reliable molecular weight measurements of RNA molecules as large as 4.0 X 10(6) dalton can be made on agarose gels containing 2.2 M formaldehyde as denaturant (Lehrach et al., 1977). Both eucaryotic and procaryotic ribosomal RNAs have generally been used as molecular weight markers. However, Maniatis et al. (1982) have suggested the use of restriction fragments of DNA as convenient molecular weight markers for RNA samples run in formaldehyde/agarose gels. This communication compares RNA and DNA molecular weight markers run under identical conditions.     

Rapid re-amplification of PCR products purified in low melting point agarose gels

A rapid, simple method is described for performing sequential amplifications of purified products produced by the PCR. After the initial amplification, an aliquot of the reaction is run on a low melting point agarose gel. A Pasteur pipet is used to punch out a gel plug from the amplified band. The DNA in this plug is then used directly as the template for a second round of amplification. Relatively large amounts of agarose can be tolerated without noticeable effects on amplification. Use of a composite gel made from agarose and linear polyacrylamide increases the ease and utility of this technique. These gels are simple to cast, easier to handle and permit several replicate plugs to be obtained from a single band. This method is well suited to experiments which use "nested" primers to increase the sensitivity and specificity of amplification or any method in which PCR amplification follows DNA purification by electrophoresis in LMP agarose gels.     

Label-free quantitation, an extension to 2DB

Determining the differential expression of proteins under different conditions is of major importance in proteomics. Since mass spectrometry-based proteomics is often used to quantify proteins, several labelling strategies have been developed. While these are generally more precise than label-free quantitation approaches, they imply specifically designed experiments which also require knowledge about peptides that are expected to be measured and need to be modified. We recently designed the 2DB database which aids storage, analysis, and publication of data from mass spectrometric experiments to identify proteins. This database can aid identifying peptides which can be used for quantitation. Here an extension to the database application, named MSMAG, is presented which allows for more detailed analysis of the distribution of peptides and their associated proteins over the fractions of an experiment. Furthermore, given several biological samples in the database, label-free quantitation can be performed. Thus, interesting proteins, which may warrant further investigation, can be identified en passant while performing high-throughput proteomics studies.     

Proteomic analysis of redox- and ErbB2-dependent changes in mammary luminal epithelial cells using cysteine- and lysine-labelling two-dimensional difference gel electrophoresis

Differential protein expression analysis based on modification of selected amino acids with labelling reagents has become the major method of choice for quantitative proteomics. One such methodology, two-dimensional difference gel electrophoresis (2-D DIGE), uses a matched set of fluorescent N-hydroxysuccinimidyl (NHS) ester cyanine dyes to label lysine residues in different samples which can be run simultaneously on the same gels. Here we report the use of iodoacetylated cyanine (ICy) dyes (for labelling of cysteine thiols, for 2-D DIGE-based redox proteomics. Characterisation of ICy dye labelling in relation to its stoichiometry, sensitivity and specificity is described, as well as comparison of ICy dye with NHS-Cy dye labelling and several protein staining methods. We have optimised conditions for labelling of nonreduced, denatured samples and report increased sensitivity for a subset of thiol-containing proteins, allowing accurate monitoring of redox-dependent thiol modifications and expression changes. Cysteine labelling was then combined with lysine labelling in a multiplex 2-D DIGE proteomic study of redox-dependent and ErbB2-dependent changes in epithelial cells exposed to oxidative stress. This study identifies differentially modified proteins involved in cellular redox regulation, protein folding, proliferative suppression, glycolysis and cytoskeletal organisation, revealing the complexity of the response to oxidative stress and the impact that overexpression of ErbB2 has on this response.     

Biomolecular phase separation through the lens of sodium‐23 NMR

Phase separation is a fundamental physicochemical process underlying the spatial arrangement and coordination of cellular events. Detailed characterization of biomolecular phase separation requires experimental access to the internal environment of dilute and especially condensed phases at high resolution. In this study, we take advantage from the ubiquitous presence of sodium ions in biomolecular samples and present the potentials of ²³Na NMR as a proxy to report the internal fluidity of biomolecular condensed phases. After establishing the temperature and viscosity dependence of ²³Na NMR relaxation rates and translational diffusion coefficient, we demonstrate that ²³Na NMR probes of rotational and translational mobility of sodium ions are capable of capturing the increasing levels of confinement in agarose gels in dependence of agarose concentration. The ²³Na NMR approach is then applied to a gel‐forming phenylalanine‐glycine (FG)‐containing peptide, part of the nuclear pore complex involved in controlling the traffic between cytoplasm and cell nucleus. It is shown that the ²³Na NMR together with the ¹⁷O NMR provide a detailed picture of the sodium ion and water mobility within the interior of the FG peptide hydrogel. As another example, we study phase separation in water‐triethylamine (TEA) mixture and provide evidence for the presence of multiple microscopic environments within the TEA‐rich phase. Our results highlight the potentials of ²³Na NMR in combination with ¹⁷O NMR in studying biological phase separation, in particular with regards to the molecular properties of biomolecular condensates and their regulation through various physico‐ and biochemical factors.     

Electrophoresis, crossed immunoelectrophoresis, and isoelectric focusing in agarose gels with reduced electroendosmotic flow

An ion exchange method using QAE-Sephadex for preparation of agarose with a low electroendosmotic flow and reduced adsorption properties is described. The successful use of such agarose for the separation of highly cationic proteins is illustrated.A method for isoelectric focusing of proteins in gels made from a mixture of purified agarose and a water-soluble non-cross-linked acrylamide polymer is described. This method can be combined with immunochemical identification by electrophoresis of the separated components into antibody-containing agarose gels, also containing such a polymer of acrylamide.     

The Advanced Properties of Circularized MSP Nanodiscs Facilitate High-resolution NMR Studies of Membrane Proteins

Membrane mimetics are essential for structural and functional studies of membrane proteins. A promising lipid-based system are phospholipid nanodiscs, where two copies of a so-called membrane scaffold protein (MSP) wrap around a patch of lipid bilayer. Consequently, the size of a nanodisc is determined by the length of the MSP. Furthermore, covalent MSP circularization was reported to improve nanodisc stability. However, a more detailed comparative analysis of the biophysical properties of circularized and linear MSP nanodiscs for their use in high-resolution NMR has not been conducted so far. Here, we analyze the membrane fluidity and temperature-dependent size variability of circularized and linear nanodiscs using a large set of analytical methods. We show that MSP circularization does not alter the membrane fluidity in nanodiscs. Further, we show that the phase transition temperature increases for circularized versions, while the cooperativity decreases. We demonstrate that circularized nanodiscs keep a constant size over a large temperature range, in contrast to their linear MSP counterparts. Due to this size stability, circularized nanodiscs are beneficial for high-resolution NMR studies of membrane proteins at elevated temperatures. Despite their slightly larger size as compared to linear nanodiscs, 3D NMR experiments of the voltage-dependent anion channel 1 (VDAC1) in circularized nanodiscs have a markedly improved spectral quality in comparison to VDAC1 incorporated into linear nanodiscs of a similar size. This study provides evidence that circularized MSP nanodiscs are a promising tool to facilitate high-resolution NMR studies of larger and challenging membrane proteins in a native lipid environment.     

Preparative isoelectric focusing in agarose

The use of agarose gels as supporting media for flat-bed preparative isoelectric focusing was applied to the fractionation of serum proteins in the pH range 3.5–6, and red cell hemolysates in the pH range 3–8. The agarose gels are easy to prepare, give linear pH gradients, and do not appear to produce molecular sieving effects. Up to 1 g serum proteins can be loaded on the gels, with recoveries between 68 and 82%. Nucleoside phosphorylase from red cell lysates was recovered with 76% yield, indicating that no appreciable denaturation of this enzyme had occurred. Preparative isoelectric focusing in agarose gels provides a useful alternative to existing techniques of preparative isoelectric focusing in sucrose gradients or granulated gels.     

Electrophoretic mobility of high-molecular-weight, double-stranded DNA on agarose gels.

A new theoretical model for the migration of high-molecular-weight, double-stranded DNA on agarose gels is presented. This leads to the prediction that under certain conditions of electrophoresis, a linear relationship will exist between the molecular weight of a DNA molecule, raised to the (-2/3) power, and its electrophoretic mobility. Agarose gel electrophoresis of the fragments of bacteriophage lambda DNA produced by several restriction endonucleases confirms this relationship, and establishes some of the limits on its linearity. For this work, a polyacrylamide slab gel apparatus was modified for use with agarose gels. This apparatus has several advantages over others commercially available for agarose gel electrophoresis, including the abilities to run a larger number of samples at one time, to use lower-concentration gels, and to maintain better temperature stability across the width of the gel. The validation of the relationship developed here between molecular weight and electrophoretic mobility should make this a useful method for determining the molecular weights of DNA fragments.     

Protein stability in nanocages: a novel approach for influencing protein stability by molecular confinement

Confinement of a protein in a small inert space and microviscosity are known to increase its thermodynamic stability in a way similar to the mechanisms that stabilize protein fold in the cell. Here, to examine the influence of confinement on protein stability we choose four test cases of single domain proteins characterized by a wide range of melting temperatures, from approximately 73 degrees C of titin I27 to approximately 36 degrees C of yeast frataxin. All proteins are stabilized when confined in the gel, the most dramatic stabilization being that of yeast frataxin, whose melting temperature increased by almost 5 degrees C in the gel. In addition to being simple to use, this approach allows us to change the viscosity of the solvent without changing its composition or altering the structure of the proteins. The dimensions of the pores of the gels fall in the nanometer range, hence they are similar to those of the chaperone cavity. This method could therefore be used as a novel and powerful approach for protein folding studies.     

Biosynthesis of isotopically labeled gramicidins and tyrocidins by Bacillus brevis

The three-dimensional structure of bilayer-associated gramicidin A is available from a structural data base. This and related peptides are, therefore, ideal model compounds to use during the implementation and development of new NMR techniques for the structural investigations of membrane proteins. As these methods rely on the isotopic labelling of single, selected or all sites, we have, investigated and optimised biochemical protocols using different strains of the Gram-positive bacterium Bacillus brevis. With newly developed schemes for isotopic labelling large amounts of gramicidin and tyrocidin enriched with stable isotopes such as ¹⁵N or ¹⁵N/¹³C have been obtained at low cost. A variety of analytical and spectroscopic techniques, including HPLC, mass spectrometry and NMR spectroscopy are used to characterise the resulting products.