Quantification of DNA sequences obtained by polymerase chain reaction using a bioluminescent adsorbent.

We studied various parameters affecting the sensitivity of assays that use nucleic acid hybridization in solution followed by capture of the hybrid on a solid phase. Sensitivity is limited not only by nonspecific binding of the detection components but also by reannealing of the target or probe to itself. To perform sensitive assays, the probe concentration must be low enough to reduce high nonspecific binding. Under these conditions, however, the strand displacement reaction or the reannealing of the target to itself drastically decreases the hybridization yield, particularly when the target and the probes are different sizes. To improve DNA detection, we propose a sandwich method based on hybridization of oligonucleotides with a single-strand DNA obtained by polymerase chain reaction under asymmetric conditions. The assay can be performed in one step using a bioluminescent detection procedure which does not require any separation step. The specificity of the method is sufficient to perform a rapid detection and quantification of papillomavirus in biological samples.     

Computer simulation study of molecular recognition in model DNA microarrays

DNA microarrays have been widely adopted by the scientific community for a variety of applications. To improve the performance of microarrays there is a need for a fundamental understanding of the interplay between the various factors that affect microarray sensitivity and specificity. We use lattice Monte Carlo simulations to study the thermodynamics and kinetics of hybridization of single-stranded target genes in solution with complementary probe DNA molecules immobilized on a microarray surface. The target molecules in our system contain 48 segments and the probes tethered on a hard surface contain 8-24 segments. The segments on the probe and target are distinct and each segment represents a sequence of nucleotides ( approximately 11 nucleotides). Each probe segment interacts exclusively with its unique complementary target segment with a single hybridization energy; all other interactions are zero. We examine how the probe length, temperature, or hybridization energy, and the stretch along the target that the probe segments complement, affect the extent of hybridization. For systems containing single probe and single target molecules, we observe that as the probe length increases, the probability of binding all probe segments to the target decreases, implying that the specificity decreases. We observe that probes 12-16 segments ( approximately 132-176 nucleotides) long gave the highest specificity and sensitivity. This agrees with the experimental results obtained by another research group, who found an optimal probe length of 150 nucleotides. As the hybridization energy increases, the longer probes are able to bind all their segments to the target, thus improving their specificity. The hybridization kinetics reveals that the segments at the ends of the probe are most likely to start the hybridization. The segments toward the center of the probe remain bound to the target for a longer time than the segments at the ends of the probe.     

Quantitative and qualitative analysis of amplified DNA sequences by a competitive hybridization assay.

The presence of allelic sequence variations in DNA fragments can be easily detected by measuring the extent of DNA strand exchange between test double-stranded PCR products (target) and labeled standard double-stranded PCR products (probe). Under selected hybridization conditions, sequences identical to the probe decreased the formation of double-labeled hybrid, whereas differing sequences were not efficient enough to compete with the regeneration of the probe. A single base substitution in the target DNA increased the percentage of remaining double-labeled probe. A general procedure involving denaturation and hybridization in solution under different temperature conditions or using different probes enabled sequence identification. The degree of regeneration of double-labeled probe was determined using a bioluminescent assay. We evaluated the specificity of this method with two probes (108 and 131 bp) and several targets with different base substitutions.     

Time-resolved detection probe for homogeneous nucleic acid analyses in one-step format

We report here an extension of homogeneous assays based on fluorescence intensity and lifetime measuring on DNA hybridization. A novel decay probe that allows simple one-step nucleic acid detection with subnanomolar sensitivity, and is suitable for closed-tube applications, is introduced. The decay probe uses fluorescence resonance energy transfer (FRET) between a europium chelate donor and an organic fluorophore acceptor. The substantial change in the acceptor emission decay time on hybridization with the target sequence allows the direct separation of the hybridized and unhybridized probe populations in a time-resolved measurement. No additional sample manipulation or self-hybridization of the probes is required. The wavelength and decay time of a decay probe can be adjusted according to the selection of probe length and acceptor fluorophore, thereby making the probes applicable to multiplexed assays. Here we demonstrate the decay probe principle and decay probe-based, one-step, dual DNA assay using celiac disease-related target oligonucleotides (single-nucleotide polymorphisms [SNPs]) as model analytes. Decay probes showed specific response for their complementary DNA target and allowed good signal deconvolution based on simultaneous optical and temporal filtering. This technique potentially could be used to further increase the number of simultaneously detected DNA targets in a simple one-step homogeneous assay.     

Hybridization assay of hepatitis B virus by QCM peptide nucleic acid biosensor

Although the analyses of HBV genomic DNA have traditionally been performed with commercial techniques, the high cost and long time consumed have hindered their applications in routinely diagnosis and prognosis of infection. We construct peptide nucleic acid (PNA) piezoelectric biosensor for real-time monitoring of hybridization of hepatitis B virus (HBV) genomic DNA. The PNA probe can combine to target DNA sequences more effectively and specifically than a DNA probe. The PNA probe was designed and immobilized on the surface of the biosensor to substitute the conventional DNA probe for direct detection of HBV genomic DNA without previous amplification by PCR. The hybridization assay was completed in 50 min. The detection limit was 8.6 pg/L and the clinical specificity was 94.44% compared with real time-PCR (RT-PCR). The PNA probe was able to distinguish sequences that differ only in one base. Detection sensitivity can be improved and detection time can be decreased by adding RecA protein-coated complementary ssDNA which complement to HBV gene regions. The QCM system we designed has the advantages of being rapid, label-free and highly sensitive and can be a useful supplement to commercial assay methods in clinical chemistry.     

Nonenzymatic autoligation in direct three-color detection of RNA and DNA point mutations

Enzymatic ligation methods are useful in diagnostic detection of DNA sequences. Here we describe the investigation of nonenzymatic phosphorothioate-iodide DNA autoligation chemistry as a method for detection and identification of both RNA and DNA sequences. Combining ligation specificity with the hybridization specificity of the ligated product is shown to yield discrimination of a point mutation as high as >10(4)-fold. Unlike enzymatic ligations, this reaction is found to be equally efficient on RNA or DNA templates. The reaction is also shown to exhibit a significant level of self-amplification, with the template acting in catalytic fashion to ligate multiple pairs of probes. A strategy for fluorescence labeling of three autoligating energy transfer (ALET) probes and directly competing them for autoligation on a target sequence is described. The method is tested in several formats, including solution phase, gel, and blot assays. The ALET probe design offers direct RNA detection, combining high sequence specificity with an easily detectable color change by fluorescence resonance energy transfer (FRET).     

Identification of Aeromonas hydrophila hybridization group 1 by PCR assays.

Synthetic oligonucleotide primers of 24 and 23 bases were used in a PCR assay to amplify a sequence of the lip gene, which encodes a thermostable extracellular lipase of Aeromonas hydrophila. A DNA fragment of approximately 760 bp was amplified from both sources, i.e., lysed A. hydrophila cells and isolated DNA. The amplified sequence was detected in ethidium bromide-stained agarose gels or by Southern blot analysis with an internal HindIII-BamHI 356-bp fragment as a hybridization probe. With A. hydrophila cells, the sensitivity of the PCR assay was < 10 CFU, and with the isolated target, the lower detection limit was 0.89 pg of DNA. Primer specificity for A. hydrophila was determined by the PCR assay with cells of 50 strains of bacteria, including most of the 14 currently recognized DNA hybridization groups of Aeromonas spp. as well as other human and environmental Aeromonas isolates. Detection of A. hydrophila by PCR amplification of DNA has great potential for rapid identification of this bacterium because it has proved to be highly specific.     

Robust Detection of Rare Species Using Environmental DNA: The Importance of Primer Specificity

Environmental DNA (eDNA) is being rapidly adopted as a tool to detect rare animals. Quantitative PCR (qPCR) using probe-based chemistries may represent a particularly powerful tool because of the method’s sensitivity, specificity, and potential to quantify target DNA. However, there has been little work understanding the performance of these assays in the presence of closely related, sympatric taxa. If related species cause any cross-amplification or interference, false positives and negatives may be generated. These errors can be disastrous if false positives lead to overestimate the abundance of an endangered species or if false negatives prevent detection of an invasive species. In this study we test factors that influence the specificity and sensitivity of TaqMan MGB assays using co-occurring, closely related brook trout (Salvelinus fontinalis) and bull trout (S. confluentus) as a case study. We found qPCR to be substantially more sensitive than traditional PCR, with a high probability of detection at concentrations as low as 0.5 target copies/µl. We also found that number and placement of base pair mismatches between the Taqman MGB assay and non-target templates was important to target specificity, and that specificity was most influenced by base pair mismatches in the primers, rather than in the probe. We found that insufficient specificity can result in both false positive and false negative results, particularly in the presence of abundant related species. Our results highlight the utility of qPCR as a highly sensitive eDNA tool, and underscore the importance of careful assay design.     

用反向斑点杂交方法检测猪常见致病菌

目的:建立检测猪常见致病菌的反向斑点杂交方法。方法:将23S rRNA基因芯片用的针对12种细菌的25～30 mer探针加长到30～38 mer,2对通用引物序列不变。用地高辛标记下游引物,以尼龙膜为载体制备膜芯片,检验探针/膜杂交的特异性和敏感性;另外设计1条大肠杆菌K88基因探针、一段带K88探针的报告基因和1对报告基因的反向PCR引物,在PCR体系中增加封口的K88报告基因和反向引物对,被检样品扩增后进行膜杂交。结果:修改的13条探针与参考目标菌株在膜上成特异性杂交,对52个参考菌株和野外分离株的检测准确率为92%;膜杂交的敏感性与玻片芯片接近,最小检出量为100 fg DNA;在尼龙膜上增加K88探针,与3重PCR产物杂交,可以检测到大肠杆菌K88毒力基因。结论:建立的反向斑点杂交方法简便快速,检测成本低,可用于仪器设备不足的实验室,同时可以加入检测如大肠杆菌K88等致病基因,提高基于保守基因的芯片的诊断能力。     

A sensitive nonisotopic hybridization assay for HIV-1 DNA

We have developed a microtiter-based sandwich hybridization assay for the detection of low copy number HIV-1 sequences. The assay employs a capture DNA sequence covalently coupled to microtiter wells through linker arms. The detection probe is a biotin-labeled DNA fragment derived from sequences adjacent to the capture sequence. After hybridization in the presence of sample nucleic acid, the detection probe remains bound only if the sample contained complementary sequences spanning the junction between capture and detection probes. The amount of detection probe bound is quantified by incubation with a peroxidase-streptavidin conjugate and a colorimetric peroxidase substrate. This assay has been combined with enzymatic target amplification to achieve sensitive detection of HIV-1 in patient samples. Following amplification of HIV-1 DNA using the polymerase chain reaction technique, a 190-bp product is produced. This product is easily and specifically quantified using the sandwich hybridization assay. The resulting test can detect one HIV-1-infected cell in 10(5) cells or about 30 molecules of HIV-1 DNA.     

Multiplexed homogeneous proximity ligation assays for high-throughput protein biomarker research in serological material

A high throughput protein biomarker discovery tool has been developed based on multiplexed proximity ligation assays in a homogeneous format in the sense of no washing steps. The platform consists of four 24-plex panels profiling 74 putative biomarkers with sub-pm sensitivity each consuming only 1 μl of human plasma sample. The system uses either matched monoclonal antibody pairs or the more readily available single batches of affinity purified polyclonal antibodies to generate the target specific reagents by covalently linking with unique nucleic acid sequences. These paired sequences are united by DNA ligation upon simultaneous target binding forming a PCR amplicon. Multiplex proximity ligation assays thereby converts multiple target analytes into real-time PCR amplicons that are individually quantified using microfluidic high capacity qPCR in nano liter volumes. The assay shows excellent specificity, even in multiplex, by its dual recognition feature, its proximity requirement, and most importantly by using unique sequence specific reporter fragments on both antibody-based probes. To illustrate the potential of this protein detection technology, a pilot biomarker research project was performed using biobanked plasma samples for the detection of colorectal cancer using a multivariate signature.     

Development and utility of an internal threshold control (ITC) real-time PCR assay for exogenous DNA detection

Sensitive and specific tests for detecting exogenous DNA molecules are useful for infectious disease diagnosis, gene therapy clinical trial safety, and gene doping surveillance. Taqman real-time PCR using specific sequence probes provides an effective approach to accurately and quantitatively detect exogenous DNA. However, one of the major challenges in these analyses is to eliminate false positive signals caused by either non-targeted exogenous or endogenous DNA sequences, or false negative signals caused by impurities that inhibit PCR. Although multiplex Taqman PCR assays have been applied to address these problems by adding extra primer-probe sets targeted to endogenous DNA sequences, the differences between targets can lead to different detection efficiencies. To avoid these complications, a Taqman PCR-based approach that incorporates an internal threshold control (ITC) has been developed. In this single reaction format, the target sequence and ITC template are co-amplified by the same primers, but are detected by different probes each with a unique fluorescent dye. Sample DNA, a prescribed number of ITC template molecules set near the limit of sensitivity, a single pair of primers, target probe and ITC probe are added to one reaction. Fluorescence emission signals are obtained simultaneously to determine the cycle thresholds (Ct) for amplification of the target and ITC sequences. The comparison of the target Ct with the ITC Ct indicates if a sample is a true positive for the target (i.e. Ct less than or equal to the ITC Ct) or negative (i.e. Ct greater than the ITC Ct). The utility of this approach was demonstrated in a nonhuman primate model of rAAV vector mediated gene doping in vivo and in human genomic DNA spiked with plasmid DNA.     

PCR assay for discriminating between infectious hypodermal and hematopoietic necrosis virus (IHHNV) and virus-related sequences in the genome of Penaeus monodon

We developed a PCR assay that can detect infectious hypodermal and hematopoietic necrosis virus (IHHNV) but that does not react with IHHNV-related sequences in the genome of Penaeus monodon from Africa and Australia. IHHNV is a single-stranded DNA virus that has caused severe mortality and stunted growth in penaeid shrimp. Recently, IHHNV-related sequences were found in the genome of some stocks of P. monodon from Africa and Australia. These virus-related sequences have a high degree of similarity (86 and 92% identities in nucleotide sequence) to the viral genome, which has often generated false-positive reactions during PCR screening of these stocks. For this assay, a pair of IHHNV primers (IHHNV309F/R) was selected. The sequences of these primers match (100% of nucleotides) the target sequence in IHHNV, but mismatch 9 or 12 nucleotides of the genomic IHHNV-related sequences. This PCR assay was tested with various IHHNV isolates and with a number of samples of shrimp DNA that contained IHHNV-related sequences. This assay can reliably distinguish IHHNV DNA from shrimp DNA: it only detects IHHNV. Also, this pair of primers was included in a duplex PCR to detect IHHNV and simultaneously determine the presence of an IHHNV-related sequence. Using these primers, the PCR assay has a sensitivity equivalent to a PCR assay commonly used for detecting IHHNV in Litopenaeus vannamei, and can be used for routine detection.     

Design of a sandwich-mode amperometric biosensor for detection of PML/RARα fusion gene using locked nucleic acids on gold electrode

In this study, a novel DNA electrochemical probe (locked nucleic acid, LNA) was designed and involved in constructing an electrochemical DNA biosensor for detection of promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα) fusion gene in acute promyelocytic leukemia for the first time. This biosensor was based on a 'sandwich' sensing mode, which involved a pair of LNA probes (capture probe immobilized at electrode surface and biotinyl reporter probe as an affinity tag for streptavidin-horseradish peroxidase (streptavidin-HRP). Since biotin can be connected with streptavidin-HRP, this biosensor offered an enzymatically amplified electrochemical current signal for the detection of target DNA. In the simple hybridization system, DNA fragment with its complementary DNA fragment was evidenced by amperometric detection, with a detection limit of 74 fM and a linear response range of 0.1-10 pM for synthetic PML/RARα fusion gene in acute promyelocytic leukemia (APL). Otherwise, the biosensor showed an excellent specificity to distinguish the complementary sequence and different mismatch sequences. The new pattern also exhibited high sensitivity and selectivity in mixed hybridization system.     

Detection of Fusarium culmorum in wheat by a surface plasmon resonance-based DNA sensor

A surface plasmon resonance (SPR) sensor based on DNA hybridization has been developed for the detection of Fusarium culmorum, a fungal pathogen of cereals. A 0.57 kbp DNA fragment of F. culmorum was amplified by specific primers and a 25-mer oligonucleotide probe was selected within the sequence of the PCR amplicon. After biotinilation, the probe was immobilized on a streptavidin sensor chip and tested for biospecific interaction with PCR products of F. culmorum. The effect of denaturating agents (formamide and urea) and ionic strength (NaCl) on hybridization efficiency of double-stranded PCR products with the immobilized probe and the specificity of the probe were investigated. The SPR biosensor was successfully used for the detection of F. culmorum in culture material of different strains and in naturally infected wheat samples. Tested on fungal cultures, it showed a good selectivity for F. culmorum against other species of either Fusarium or other fungal genera. A background signal was observed in wheat samples strictly depending on the DNA amount of the testing matrix. Testing 30 ng of durum wheat DNA the detection limit was 0.06 pg of F. culmorum DNA. The developed PCR-SPR assay allowed to detect F. culmorum with sensitivity and specificity higher than gel-electrophoresis analysis.     

两种DNA探针杂交检测结核分支杆菌方法的研究

为改进结核杆菌DNA探针的特异性与实用性,研制了以生物素标记的两种对结核分支杆菌特异的DNA探针:一个5’端标记的20bp的寡核苷酸探针和一个采用PCR方法合成的188bp长链探针。两种探针分别与结核分支杆菌的全染色体DNA,以及基因组上IS6110序列的一段317bp的PCR扩增产物进行斑点杂交,以碱性磷酸酶(AP)催化的染色反应检测,测试了两个探针的敏感性和特异性。系统地比较研究了两种探针杂交检测条件:探针的浓度选择,杂交温度与洗膜温度的选择,以及杂交与洗膜温度对检测的敏感性与特异性的影响。寡核苷酸探针和188bp探针杂交检测纯化结核分支杆菌基因组DNA的敏感性分别为100ng与6ng,杂交检测PCR产物的敏感性分别是400pg与50pg。两探针的最佳杂交浓度均为40～160ng/ml,最佳杂交温度分别是42℃与68℃,最佳洗膜温度分别是60℃与60～68℃之间。两种探针均仅与结核分支杆菌及BCG有杂交信号,而与其它受试分支杆菌及非分支杆菌杂交结果都呈阴性。它们的特异性都很强,但188bp探针的敏感性约是寡核苷酸探针的7～16倍,而且188bp探针检测本底较低,是检测结核分支杆菌的较佳选择     

Real-time PCR detection of Brucella abortus: a comparative study of SYBR green I, 5'-exonuclease,and hybridization probe assays

Real-time PCR provides a means of detecting and quantifying DNA targets by monitoring PCR product accumulation during cycling as indicated by increased fluorescence. A number of different approaches can be used to generate the fluorescence signal. Three approaches-SYBR Green I (a double-stranded DNA intercalating dye), 5'-exonuclease (enzymatically released fluors), and hybridization probes (fluorescence resonance energy transfer)-were evaluated for use in a real-time PCR assay to detect Brucella abortus. The three assays utilized the same amplification primers to produce an identical amplicon. This amplicon spans a region of the B. abortus genome that includes portions of the alkB gene and the IS711 insertion element. All three assays were of comparable sensitivity, providing a linear assay over 7 orders of magnitude (from 7.5 ng down to 7.5 fg). However, the greatest specificity was achieved with the hybridization probe assay.     

Quantitative PCR in the diagnosis of Leishmania

Polymerase chain reaction (PCR) is a sensitive and rapid method for the diagnosis of canine Leishmania infection and can be performed on a variety of biological samples, including peripheral blood, lymph node, bone marrow and skin. Standard PCR requires electrophoretic analysis of the amplification products and is usually not suitable for quantification of the template DNA (unless competitor-based or other methods are developed), being of reduced usefulness when accurate monitoring of target DNA is required. Quantitative real-time PCR allows the continuous monitoring of the accumulation of PCR products during the amplification reaction. This allows the identification of the cycle of near-logarithmic PCR product generation (threshold cycle) and, by inference, the relative quantification of the template DNA present at the start of the reaction. Since the amplification product are monitored in "real-time" as they form cycle-by-cycle, no post-amplification handling is required. The absolute quantification is performed according either to an internal standard co-amplified with the sample DNA, or to an external standard curve obtained by parallel amplification of serial known concentrations of a reference DNA sequence. From the quantification of the template DNA, an estimation of the relative load of parasites in the different samples can be obtained. The advantages compared to standard and semi-quantitative PCR techniques are reduction of the assay's time and contamination risks, and improved sensitivity. As for standard PCR, the minimal components of the quantitative PCR reaction mixture are the DNA target of the amplification, an oligonucleotide primer pair flanking the target sequence, a suitable DNA polymerase, deoxynucleotides, buffer and salts. Different technologies have been set up for the monitoring of amplification products, generally based on the use of fluorescent probes. For instance, SYBR Green technology is a non-specific detection system based on a fluorescent dsDNA intercalator and it is applicable to all potential targets. TaqMan technology is more specific since performs the direct assessment of the amount of amplified DNA using a fluorescent probe specific for the target sequence flanked by the primer pair. This probe is an oligonucleotide labelled with a reporter dye (fluorescent) and a quencher (which absorbs the fluorescent signal generated by the reporter). The thermic protocol of amplification allows the binding of the fluorescent probe to the target sequence before the binding of the primers and the starting of the polymerization by Taq polymerase. During polymerization, 5'-3' exonuclease activity of Taq polymerase digests the probe and in this way the reporter dye is released from the probe and a fluorescent signal is detected. The intensity of the signal accumulates at the end of each cycle and is related to the amount of the amplification product. In recent years, quantitative PCR methods based either on SYBR Green or TaqMan technology have been set up for the quantification of Leishmania in mouse liver, mouse skin and human peripheral blood, targeting either single-copy chromosomal or multi-copy minicircle sequences with high sensitivity and reproducibility. In particular, real-time PCR seems to be a reliable, rapid and noninvasive method for the diagnosis and follow up of visceral leishmaniasis in humans. At present, the application of real-time PCR for research and clinical diagnosis of Leishmania infection in dogs is still foreseable. As for standard PCR, the high sensitivity of real-time PCR could allow the use of blood sampling that is less invasive and easily performed for monitoring the status of the dogs. The development of a real-time PCR assay for Leishmania infantum infection in dogs could support the standard and optimized serological and PCR methods currenly in use for the diagnosis and follow-up of canine leishmaniasis, and perhaps prediction of recurrences associated with tissue loads of residual pathogens after treatment. At this regard, a TaqMan Real Time PCR method developed for the quantification of Leishmania infantum minicircle DNA in peripheral blood of naturally infected dogs sampled before and at different time points after the beginning of a standard antileishmanial therapy will be illustrated.     

Efficient identification of DNA hybridization partners in a sequence database

MOTIVATION: The specific hybridization of complementary DNA molecules underlies many widely used molecular biology assays, including the polymerase chain reaction and various types of microarray analysis. In order for such an assay to work well, the primer or probe must bind to its intended target, without also binding to additional sequences in the reaction mixture. For any given probe or primer, potential non-specific binding partners can be identified using state-of-the-art models of DNA binding stability. Unfortunately, these models rely on dynamic programming algorithms that are too slow to apply on a genomic scale. RESULTS: We present an algorithm that efficiently scans a DNA database for short (approximately 20-30 base) sequences that will bind to a query sequence. We use a filtering approach, in which a series of increasingly stringent filters is applied to a set of candidate k-mers. The k-mers that pass all filters are then located in the sequence database using a precomputed index, and an accurate model of DNA binding stability is applied to the sequence surrounding each of the k-mer occurrences. This approach reduces the time to identify all binding partners for a given DNA sequence in human genomic DNA by approximately three orders of magnitude, from two days for the ENCODE regions to less than one minute for typical queries. Our approach is scalable to large DNA sequences. Our method can scan the human genome for medium strength binding sites to a candidate PCR primer in an average of 34.5 minutes. AVAILABILITY: Software implementing the algorithms described here is available at http://noble.gs.washington.edu/proj/dna-binding.