Characterization of bacterial proteases with a panel of fluorescent peptide substrates

Bacteria produce a range of proteolytic enzymes. In an attempt to detect and identify bacteria on the basis of their protease activity, a panel of protease substrates was investigated. Peptides conjugated to the fluorophore 7-amino-4-methylcoumarin (AMC) are well-established substrates for measuring protease activity. Although peptide-AMC substrates are generally not specific for a single protease, a unique pattern can be achieved for both highly specific enzymes and those with a broader substrate range by comparing different peptide substrates. The panel of 7 peptide-AMC substrates chosen exhibited a unique pattern for nine microbial proteases. The selected peptides were used to determine protease activity in cultured strains of Pseudomonas aeruginosa and Staphylococcus aureus. A signal pattern obtained with peptides with arginine, lysine, and tyrosine in the P1 position characterized the bacterial protease activities in these samples. The kinetic parameters for the three best substrates for the P. aeruginosa sample were calculated. Further information about substrate specificity was gained by the selective use of protease inhibitors. The results presented show that peptide-AMC substrates provide a simple and sensitive tool to characterize protease activity in microbiological samples and that they have the potential to identify and distinguish different bacterial species.     

Proteomic techniques and activity-based probes for the system-wide study of proteolysis

Proteolysis constitutes a major post-translational modification but specificity and substrate selectivity of numerous proteases have remained elusive. In this review, we highlight how advanced techniques in the areas of proteomics and activity-based probes can be used to investigate i) protease active site specificity; ii) protease in vivo substrates; iii) protease contribution to proteome homeostasis and composition; and iv) detection and localization of active proteases. Peptide libraries together with genetical or biochemical selection have traditionally been used for active site profiling of proteases. These are now complemented by proteome-derived peptide libraries that simultaneously determine prime and non-prime specificity and characterize subsite cooperativity. Cell-contextual discovery of protease substrates is rendered possible by techniques that isolate and quantitate protein termini. Here, a novel approach termed Terminal Amine Isotopic Labeling of Substrates (TAILS) provides an integrated platform for substrate discovery and appropriate statistical evaluation of terminal peptide identification and quantification. Proteolytically generated carboxy-termini can now also be analyzed on a proteome-wide level. Proteolytic regulation of proteome composition is monitored by quantitative proteomic approaches employing stable isotope coding or label free quantification. Activity-based probes specifically recognize active proteases. In proteomic screens, they can be used to detect and quantitate proteolytic activity while their application in cellular histology allows to locate proteolytic activity in situ. Activity-based probes – especially in conjunction with positron emission tomography – are also promising tools to monitor proteolytic activities on an organism-wide basis with a focus on in vivo tumor imaging. Together, this array of methodological possibilities enables unveiling physiological protease substrate repertoires and defining protease function in the cellular- and organism-wide context.     

Quantitative Förster resonance energy transfer analysis for kinetic determinations of SUMO-specific protease

Förster resonance energy transfer (FRET) technology has been widely used in biological and biomedical research, and it is a very powerful tool for elucidating protein interactions in either dynamic or steady state. SUMOylation (the process of SUMO [small ubiquitin-like modifier] conjugation to substrates) is an important posttranslational protein modification with critical roles in multiple biological processes. Conjugating SUMO to substrates requires an enzymatic cascade. Sentrin/SUMO-specific proteases (SENPs) act as an endopeptidase to process the pre-SUMO or as an isopeptidase to deconjugate SUMO from its substrate. To fully understand the roles of SENPs in the SUMOylation cycle, it is critical to understand their kinetics. Here, we report a novel development of a quantitative FRET-based protease assay for SENP1 kinetic parameter determination. The assay is based on the quantitative analysis of the FRET signal from the total fluorescent signal at acceptor emission wavelength, which consists of three components: donor (CyPet–SUMO1) emission, acceptor (YPet) emission, and FRET signal during the digestion process. Subsequently, we developed novel theoretical and experimental procedures to determine the kinetic parameters, k_cat, K_M, and catalytic efficiency (k_cat/K_M) of catalytic domain SENP1 toward pre-SUMO1. Importantly, the general principles of this quantitative FRET-based protease kinetic determination can be applied to other proteases.     

Evaluation of a FRET-Peptide Substrate to Predict Virulence in Pseudomonas aeruginosa

Pseudomonas aeruginosa produces a number of proteases that are associated with virulence and disease progression. A substrate able to detect P. aeruginosa-specific proteolytic activity could help to rapidly alert clinicians to the virulence potential of individual P. aeruginosa strains. For this purpose we designed a set of P. aeruginosa-specific fluorogenic substrates, comprising fluorescence resonance energy transfer (FRET)-labeled peptides, and evaluated their applicability to P. aeruginosa virulence in a range of clinical isolates. A FRET-peptide comprising three glycines (3xGly) was found to be specific for the detection of P. aeruginosa proteases. Further screening of 97 P. aeruginosa clinical isolates showed a wide variation in 3xGly cleavage activity. The absence of 3xGly degradation by a lasI knock out strain indicated that 3xGly cleavage by P. aeruginosa could be quorum sensing (QS)-related, a hypothesis strengthened by the observation of a strong correlation between 3xGly cleavage, LasA staphylolytic activity and pyocyanin production. Additionally, isolates able to cleave 3xGly were more susceptible to the QS inhibiting antibiotic azithromycin (AZM). In conclusion, we designed and evaluated a 3xGly substrate possibly useful as a simple tool to predict virulence and AZM susceptibility.     

Selectivity profiling of DegP substrates and inhibitors

Protein quality control factors are involved in many key physiological processes and severe human diseases that are based on misfolding or amyloid formation. Prokaryotic representatives are often virulence factors of pathogenic bacteria. Therefore, protein quality control factors represent a novel class of drug targets. The bacterial serine protease DegP, belonging to the widely conserved family of HtrA proteases, exhibits unusual structural and functional plasticity that could be exploited by small molecule modulators. However, only one weak synthetic peptide substrate and no inhibitors are available to date. We report the identification of a potent heptameric pNA-substrate and chloromethyl ketone based inhibitors of DegP. In addition, specificity profiling resulted in the identification of one strong inhibitor and a potent substrate for subtilisin as well as a number of specific elastase substrates and inhibitors.     

Determination of protease cleavage site motifs using mixture-based oriented peptide libraries.

The number of known proteases is increasing at a tremendous rate as a consequence of genome sequencing projects. Although one can guess at the functions of these novel enzymes by considering sequence homology to known proteases, there is a need for new tools to rapidly provide functional information on large numbers of proteins. We describe a method for determining the cleavage site specificity of proteolytic enzymes that involves pooled sequencing of peptide library mixtures. The method was used to determine cleavage site motifs for six enzymes in the matrix metalloprotease (MMP) family. The results were validated by comparison with previous literature and by analyzing the cleavage of individually synthesized peptide substrates. The library data led us to identify the proteoglycan neurocan as a novel MMP-2 substrate. Our results indicate that a small set of libraries can be used to quickly profile an expanding protease family, providing information applicable to the design of inhibitors and to the identification of protein substrates.     

Profiling serine protease substrate specificity with solution phase fluorogenic peptide microarrays

A novel microarray-based proteolytic profiling assay enabled the rapid determination of protease substrate specificities with minimal sample and enzyme usage. A 722-member library of fluorogenic protease substrates of the general format Ac-Ala-X-X-(Arg/Lys)-coumarin was synthesized and microarrayed, along with fluorescent calibration standards, in glycerol nanodroplets on microscope slides. The arrays were then activated by deposition of an aerosolized enzyme solution, followed by incubation and fluorometric scanning. The specificities of human blood serine proteases (human thrombin, factor Xa, plasmin, and urokinase plasminogen activator) were examined. The arrays provided complete maps of protease specificity for all of the substrates tested and allowed for detection of cooperative interactions between substrate subsites. The arrays were further utilized to explore the conservation of thrombin specificity across species by comparing the proteolytic fingerprints of human, bovine, and salmon thrombin. These enzymes share nearly identical specificity profiles despite approximately 390 million years of divergent evolution. Fluorogenic substrate microarrays provide a rapid way to determine protease substrate specificity information that can be used for the design of selective inhibitors and substrates, the study of evolutionary divergence, and potentially, for diagnostic applications.     

Robust substrate profiling method reveals striking differences in specificities of serum and lung fluid proteases

Proteases are candidate biomarkers and therapeutic targets for many diseases. Sensitive and robust techniques are needed to quantify proteolytic activities within the complex biological milieu. We hypothesized that a combinatorial protease substrate library could be used effectively to identify similarities and differences between serum and bronchoalveolar lavage fluid (BALF), two body fluids that are clinically important for developing targeted therapies and diagnostics. We used a concise library of fluorogenic probes to map the protease substrate specificities of serum and BALF from guinea pigs. Differences in the proteolytic fingerprints of the two fluids were striking: serum proteases cleaved substrates containing cationic residues and proline, whereas BALF proteases cleaved substrates containing aliphatic and aromatic residues. Notably, cleavage of proline-containing substrates dominated all other protease activities in both human and guinea pig serum. This substrate profiling approach provides a foundation for quantitative comparisons of protease specificities between complex biological samples.     

Substrate specifity profiling of the Aspergillus fumigatus proteolytic secretome reveals consensus motifs with predominance of Ile/Leu and Phe/Tyr

Background

The filamentous fungus Aspergillus fumigatus (AF) can cause devastating infections in immunocompromised individuals. Early diagnosis improves patient outcomes but remains challenging because of the limitations of current methods. To augment the clinician''s toolkit for rapid diagnosis of AF infections, we are investigating AF secreted proteases as novel diagnostic targets. The AF genome encodes up to 100 secreted proteases, but fewer than 15 of these enzymes have been characterized thus far. Given the large number of proteases in the genome, studies focused on individual enzymes may overlook potential diagnostic biomarkers.

Methodology and Principal Findings

As an alternative, we employed a combinatorial library of internally quenched fluorogenic probes (IQFPs) to profile the global proteolytic secretome of an AF clinical isolate in vitro. Comparative protease activity profiling revealed 212 substrate sequences that were cleaved by AF secreted proteases but not by normal human serum. A central finding was that isoleucine, leucine, phenylalanine, and tyrosine predominated at each of the three variable positions of the library (44.1%, 59.1%, and 57.0%, respectively) among substrate sequences cleaved by AF secreted proteases. In contrast, fewer than 10% of the residues at each position of cleaved sequences were cationic or anionic. Consensus substrate motifs were cleaved by thermostable serine proteases that retained activity up to 50°C. Precise proteolytic cleavage sites were reliably determined by a simple, rapid mass spectrometry-based method, revealing predominantly non-prime side specificity. A comparison of the secreted protease activities of three AF clinical isolates revealed consistent protease substrate specificity fingerprints. However, secreted proteases of A. flavus, A. nidulans, and A. terreus strains exhibited striking differences in their proteolytic signatures.

Conclusions

This report provides proof-of-principle for the use of protease substrate specificity profiling to define the proteolytic secretome of Aspergillus fumigatus. Expansion of this technique to protease secretion during infection could lead to development of novel approaches to fungal diagnosis.     

Screening of potential a disintegrin and metalloproteinase with thrombospondin motifs-4 inhibitors using a collagen model fluorescence resonance energy transfer substrate

The major components of the cartilage extracellular matrix are type II collagen and aggrecan. Type II collagen provides cartilage with its tensile strength, whereas the water-binding capacity of aggrecan provides compressibility and elasticity. Aggrecan breakdown leads to an increase in proteolytic susceptibility of articular collagen; hence, aggrecan may also have a protective effect on type II collagen. Given their role in aggrecan degradation and differing substrate specificity profiles, the pursuit of inhibitors for both aggrecanase 1 (a disintegrin and metalloproteinase with thrombospondin motifs-4 [ADAMTS-4]) and aggrecanase 2 (ADAMTS-5) is desirable. We previously described collagen model fluorescence resonance energy transfer (FRET) substrates for aggrecan-degrading members of the ADAMTS family. These FRET substrate assays are also fully compatible with multiwell formats. In the current study, a collagen model FRET substrate was examined for inhibitor screening of ADAMTS-4. ADAMTS-4 was screened against a small compound library (n=960) with known pharmacological activity. Five compounds that inhibited ADAMTS-4>60% at a concentration of 1muM were identified. A secondary screen using reversed-phase high-performance liquid chromatography (RP-HPLC) was developed and performed for verification of the five potential inhibitors. Ultimately, piceatannol was confirmed as a novel inhibitor of ADAMTS-4, with an IC(50) value of 1muM. Because the collagen model FRET substrates have distinct conformational features that may interact with protease secondary substrate sites (exosites), nonactive site-binding inhibitors can be identified via this approach. Selective inhibitors for ADAMTS-4 would allow a more definitive evaluation of this protease in osteoarthritis and also represent a potential next generation in metalloproteinase therapeutics.     

Evaluation of the CFP-substrate-YFP system for protease studies: advantages and limitations

A protease can be defined as an enzyme capable of hydrolyzing peptide bonds. Thus, characterization of a protease involves identification of target peptide sequences, measurement of activities toward these sequences, and determination of kinetic parameters. Biological protease substrates based on fluorescent protein pairs, which allow for use of fluorescence resonance energy transfer (FRET), have been recently developed for in vivo protease activity detection and represent a very interesting alternative to chemical substrates for in vitro protease characterization. Here, we analyze a FRET system consisting of cyan and yellow fluorescent proteins (CFP and YFP, respectively), which are fused by a peptide linker serving as protease substrate. Conditions for CFP-YFP fusion protein production in Escherichia coli and purification of proteins were optimized. FRET between CFP and YFP was found to be optimum at a pH between 5.5 and 10.0, at low concentrations of salt and a temperature superior to 25 degrees C. For efficient FRET to occur, the peptide linker between CFP and YFP can measure up to 25 amino acids. The CFP-substrate-YFP system demonstrated a high degree of resistance to nonspecific proteolysis, making it suitable for enzyme kinetic analysis. As with chemical substrates, substrate specificity of CFP-substrate-YFP proteins was tested towards different proteases and kcat/Km values were calculated.     

Improved proteolytic stability of chicken cathelicidin-2 derived peptides by D-amino acid substitutions and cyclization

A truncated version of host defense peptide chicken cathelicidin-2, C1-15, possesses potent, broad spectrum antibacterial activity. A variant of this peptide, F_2,5,12W, which contains 3 phenylalanine to tryptophan substitutions, possesses improved antibacterial activity and lipopolysaccharide (LPS) neutralizing activity compared to C1-15. In order to improve the proteolytic resistance of both peptides we engineered novel chicken cathelicidin-2 analogs by substitution of l- with d-amino acids and head-to-tail cyclization. Both cyclic and d-amino acid variants showed enhanced stability in human serum compared to C1-15 and F_2,5,12W. The d-amino acid variants were fully resistant to proteolysis by trypsin and bacterial proteases. Head-to-tail cyclization of peptide F_2,5,12W resulted in a 3.5-fold lower cytotoxicity toward peripheral blood mononuclear cells. In general, these modifications did not influence antibacterial and LPS neutralization activities. It is concluded that for the development of novel therapeutic compounds based on chicken cathelicidin-2 d-amino acid substitutions and cyclization must be considered. These modifications increase the stability and lower cytotoxicity of the peptides without altering their antimicrobial potency.     

A broad-spectrum fluorescence-based peptide library for the rapid identification of protease substrates

Identification of peptide substrates for proteases can be a major undertaking. To overcome issues such as feasibility and deconvolution, associated with large peptide libraries, a 'small but smart' generic fluorescence resonance energy transfer rapid endopeptidase profiling library (REPLi) was synthesised as a tool for rapidly identifying protease substrates. Within a tripeptide core, flanked by Gly residues, similar amino acids were paired giving rise to a relatively small library of 3375 peptides divided into 512 distinct pools each containing only 8 peptides. The REPLi was validated with trypsin, pepsin, the matrix metalloprotease (MMP)-12 and MMP-13 and calpains-1 and -2. In the case of calpain-2, a single iteration step involving LC-MS, provided the definitive residue specificity from which a highly sensitive fluorogenic substrate, (FAM)-Gly-Gly-Gly-Gln-Leu-Tyr-Gly-Gly-DPA-Arg-Arg-Lys-(TAMRA), was then designed. The thorough validation of this 'small but smart' peptide library with representatives from each of the four mechanistic protease classes indicates that the REPLi will be useful for the rapid identification of substrates for multiple proteases.     

A dual-purpose synthetic colloidal platform for protease mapping: substrate profiling for Dengue and West Nile virus proteases

In a proof of concept study, we created a small focused fluorescent hexapeptide library onto 14 multiplexed barcoded sets of silica particles to probe the substrate recognition specificity of West Nile and Dengue virus proteases. A flow cytometric analysis demonstrated that the optical signature of each bead population remained distinguishable throughout the solid-phase peptide synthesis and proteolytic assay. As expected, both proteases displayed a narrow specificity for lysine and arginine residues in the P₁ and P₂ substrate positions. This open-ended platform enables the fast and simultaneous identification of peptide substrates and is applicable to other proteases.     

Substrate-Driven Mapping of the Degradome by Comparison of Sequence Logos

Sequence logos are frequently used to illustrate substrate preferences and specificity of proteases. Here, we employed the compiled substrates of the MEROPS database to introduce a novel metric for comparison of protease substrate preferences. The constructed similarity matrix of 62 proteases can be used to intuitively visualize similarities in protease substrate readout via principal component analysis and construction of protease specificity trees. Since our new metric is solely based on substrate data, we can engraft the protease tree including proteolytic enzymes of different evolutionary origin. Thereby, our analyses confirm pronounced overlaps in substrate recognition not only between proteases closely related on sequence basis but also between proteolytic enzymes of different evolutionary origin and catalytic type. To illustrate the applicability of our approach we analyze the distribution of targets of small molecules from the ChEMBL database in our substrate-based protease specificity trees. We observe a striking clustering of annotated targets in tree branches even though these grouped targets do not necessarily share similarity on protein sequence level. This highlights the value and applicability of knowledge acquired from peptide substrates in drug design of small molecules, e.g., for the prediction of off-target effects or drug repurposing. Consequently, our similarity metric allows to map the degradome and its associated drug target network via comparison of known substrate peptides. The substrate-driven view of protein-protein interfaces is not limited to the field of proteases but can be applied to any target class where a sufficient amount of known substrate data is available.     

Longer wavelength fluorescence resonance energy transfer depsipeptide substrates for hepatitis C virus NS3 protease

Maturation of the hepatitis C virus (HCV) polyprotein occurs by a series of proteolytic processes catalyzed by host cell proteases and the virally encoded proteases NS2 and NS3. Although several peptidomimetic inhibitors of NS3 protease have been published, only a few small molecule inhibitors have been reported. In an effort to improve screening efficiency by minimizing the spectral interference of various test compounds, a substrate that contains the longer wavelength fluorescence resonance energy transfer (FRET) pair, TAMRA/QSY-7, was devised. For the optimized substrate T-Abu-Q, with sequence Ac-Asp-Glu-Lys(TAMRA)-Glu-Glu-Abu-Psi(COO)Ala-Ser-Lys(QSY-7)-amide, the kinetic parameters with HCV NS3 protease are K(m)=30 microM, k(cat)=0.6s(-1), and k(cat)/K(m)=20,100s(-1)M(-1). We show that this substrate is suitable for inhibitor analysis and mechanistic studies so long as the substrate concentration is low enough (0.5 microM) to avoid complications from high inner filter effects. The substrate is especially useful with ultra-high-density screening formats, such as microarrayed compound screening technology, because there is less spectral interference from the compounds being tested than with more traditional (EDANS/DABCYL) FRET protease substrates. The merits of the new substrate, as well as potential applications of this FRET pair to other protease substrates, are discussed.     

Biochemical and Structural Characterization of SplD Protease from Staphylococcus aureus

Staphylococcus aureus is a dangerous human pathogen. A number of the proteins secreted by this bacterium are implicated in its virulence, but many of the components of its secretome are poorly characterized. Strains of S. aureus can produce up to six homologous extracellular serine proteases grouped in a single spl operon. Although the SplA, SplB, and SplC proteases have been thoroughly characterized, the properties of the other three enzymes have not yet been investigated. Here, we describe the biochemical and structural characteristics of the SplD protease. The active enzyme was produced in an Escherichia coli recombinant system and purified to homogeneity. P1 substrate specificity was determined using a combinatorial library of synthetic peptide substrates showing exclusive preference for threonine, serine, leucine, isoleucine, alanine, and valine. To further determine the specificity of SplD, we used high-throughput synthetic peptide and cell surface protein display methods. The results not only confirmed SplD preference for a P1 residue, but also provided insight into the specificity of individual primed- and non-primed substrate-binding subsites. The analyses revealed a surprisingly narrow specificity of the protease, which recognized five consecutive residues (P4-P3-P2-P1-P1’) with a consensus motif of R-(Y/W)-(P/L)-(T/L/I/V)↓S. To understand the molecular basis of the strict substrate specificity, we crystallized the enzyme in two different conditions, and refined the structures at resolutions of 1.56 Å and 2.1 Å. Molecular modeling and mutagenesis studies allowed us to define a consensus model of substrate binding, and illustrated the molecular mechanism of protease specificity.     

Global Regulator MorA Affects Virulence-Associated Protease Secretion in Pseudomonas aeruginosa PAO1

Bacterial invasion plays a critical role in the establishment of Pseudomonas aeruginosa infection and is aided by two major virulence factors – surface appendages and secreted proteases. The second messenger cyclic diguanylate (c-di-GMP) is known to affect bacterial attachment to surfaces, biofilm formation and related virulence phenomena. Here we report that MorA, a global regulator with GGDEF and EAL domains that was previously reported to affect virulence factors, negatively regulates protease secretion via the type II secretion system (T2SS) in P. aeruginosa PAO1. Infection assays with mutant strains carrying gene deletion and domain mutants show that host cell invasion is dependent on the active domain function of MorA. Further investigations suggest that the MorA-mediated c-di-GMP signaling affects protease secretion largely at a post-translational level. We thus report c-di-GMP second messenger system as a novel regulator of T2SS function in P. aeruginosa. Given that T2SS is a central and constitutive pump, and the secreted proteases are involved in interactions with the microbial surroundings, our data broadens the significance of c-di-GMP signaling in P. aeruginosa pathogenesis and ecological fitness.     

Characterization of a proton pumping transmembrane protein incorporated into a supported three-dimensional matrix of proteoliposomes

A highly sensitive assay based on new internally quenched fluorogenic peptide substrates has been developed for monitoring protease activities. These novel substrates comprise an Edans (5-(2-aminoethylamino)-1-naphthalenesulfonic acid) group at the C terminus and a Dabsyl (4-(dimethylamino)azobenzene-4'-sulfonyl chloride) fluorophore at the N terminus of the peptide chains. The Edans fluorescence increases upon peptide hydrolysis by Pseudomonas aeruginosa proteases, and this increase is directly proportional to the amount of substrate cleaved, i.e., protease activity. The substrates Dabsyl-Ala-Ala-Phe-Ala-Edans and Dabsyl-Leu-Gly-Gly-Gly-Ala-Edans were used for testing the peptidasic activities of P. aeruginosa elastase and LasA protease, respectively. Elastase and LasA kinetic parameters were calculated and a sensitive assay was designed for the detection of P. aeruginosa proteases in bacterial supernatants. The sensitivity and the small sample requirements make the assay suitable for high-throughput screening of biological samples. Furthermore, this P. aeruginosa protease assay improves upon existing assays because it is simple, it requires only one step, and even more significantly it is enzyme specific.     

Proteolysis to Identify Protease Substrates: Cleave to Decipher

Proteolysis is an irreversible post‐translational modification process, characterized by highly precise yet stable cleavage of proteins. Downstream events in signaling processes are reliant on proteolysis triggered by the protease activity. Studies indicate that abnormal proteolytic activity may lead to the manifestation of diseased conditions. Therefore, characterization of proteases may provide clues to understand their role in fundamental cellular processes like cellular growth, differentiation, apoptosis, and survival. The relevance of proteases and their substrates as clinical targets are being studied. Understanding the mechanism of proteolytic activity, the identity, and the role of repertoire of its substrates in a physiological pathway has opened avenues for novel drug designing. However, only a limited knowledge of protease substrates is currently available. In this review, the authors recapitulate the library screening, proteomics, and bioinformatics based approaches that have been employed for the identification of protease substrates.