Marker-assisted introgression of five QTLs controlling fruit quality traits into three tomato lines revealed interactions between QTLs and genetic backgrounds

The evaluation of organoleptic quality of tomato fruit requires physical, chemical and sensory analyses, which are expensive and difficult to assess. Therefore, their practical use in phenotypic selection is difficult. In a previous study, the genetic control of several traits related to organoleptic quality of fresh-market tomato fruit was investigated. Five chromosome regions strongly involved in organoleptic quality attributes were then chosen to be introgressed into three different recipient lines through marker-assisted selection. A marker-assisted backcross (MABC) strategy was performed, as all the favorable alleles for quality traits were provided by the same parental tomato line, whose fruit weight (FW) and firmness were much lower than those of the lines commonly used to develop fresh market varieties. Three improved lines were obtained after three backcrossing and two selfing generations. The implementation of the MABC scheme is described. The three improved lines were crossed together and with the recipient lines in a half-diallel mating scheme, and the simultaneous effect of the five quantitative trait locus (QTL) regions was compared in different genetic backgrounds. Significant effects of the introgressed regions and of the genetic backgrounds were shown. Additive effects were detected for soluble solid and reducing sugar content in two genetic backgrounds. A partially dominant effect on titratable acidity was detected in only one genetic background. In contrast, additive to dominant unfavorable effects of the donor alleles were detected for FW and locule number in the three genetic backgrounds. Recessive QTL effects on firmness were only detected in the two firmest genetic backgrounds. Comparison of the hybrids in the half-diallel gave complementary information on the effects of: (1) the alleles at the selected regions, (2) the genetic backgrounds and (3) their interaction. Breeding efficiency strongly varied according to the recipient parent, and significant interactions between QTLs and genetic backgrounds were shown for all of the traits studied.     

Advanced backcross QTL analysis: a method for the simultaneous discovery and transfer of valuable QTLs from unadapted germplasm into elite breeding lines

Advanced backcross QTL analysis is proposed as a method of combining QTL analysis with variety development. It is tailored for the discovery and transfer of valuable QTL alleles from unadapted donor lines (e.g., land races, wild species) into established elite inbred lines. Following this strategy, QTL analysis is delayed until the BC2 or BC3 generation and, during the development of these populations, negative selection is exercised to reduce the frequency of deleterious donor alleles. Simulations suggest that advanced backcross QTL analysis will be effective in detecting additive, dominant, partially dominant, or overdominant QTLs. Epistatic QTLs or QTLs with gene actions ranging from recessive to additive will be detected with less power than in selfing generations. QTL-NILs can be derived from advanced backcross populations in one or two additional generations and utilized to verify QTL activity. These same QTL-NILs also represent commercial inbreds improved (over the original recurrent inbred line) for one or more quantitative traits. The time lapse from QTL discovery to construction and testing of improved QTL-NILs is minimal (1–2 years). If successfully employed, advanced backcross QTL analysis can open the door to exploiting unadapted and exotic germplasm for the quantitative trait improvement of a number of crop plants.     

Mapping of yield-related QTLs in pepper in an interspecific cross of <Emphasis Type="Italic">Capsicum annuum</Emphasis> and <Emphasis Type="Italic">C. frutescens</Emphasis>

An advanced backcross QTL study was performed in pepper using a cross between the cultivated species Capsicum annuum cv. Maor and the wild C. frutescens BG 2816 accession. A genetic map from this cross was constructed, based on 248 BC(2) plants and 92 restriction fragment length polymorphism (RFLP) markers distributed throughout the genome. Ten yield-related traits were analyzed in the BC(2) and BC(2)S(1) generations, and a total of 58 quantitative trait loci (QTLs) were detected; the number of QTLs per trait ranged from two to ten. Most of the QTLs were found in 11 clusters, in which similar QTL positions were identified for multiple traits. Unlike the high percentage of favorable QTL alleles discovered in wild species of tomato and rice, only a few such QTL alleles were detected in BG 2816. For six QTLs (10%), alleles with effects opposite to those expected from the phenotype were detected in the wild species. The use of common RFLP markers in the pepper and tomato maps enabled possible orthologous QTLs in the two species to be determined. The degree of putative QTL orthology for the two main fruit morphology traits-weight and shape-varied considerably. While all eight QTLs identified for fruit weight in this study could be orthologous to tomato fruit weight QTLs, only one out of six fruit shape QTLs found in this study could be orthologous to tomato fruit shape QTLs.     

QTL analysis of fruit quality in fresh market tomato: a few chromosome regions control the variation of sensory and instrumental traits

The organoleptic quality of tomato fruit involves a set of attributes (flavour, aroma, texture) that can be evaluated either by sensory analyses or by instrumental measures. In order to study the genetic control of this characteristic, a recombinant inbred line (RIL) population was developed from an intraspecific cross between a cherry tomato line with a good overall aroma intensity and an inbred line with medium flavour but bigger fruits. A total of 38 traits involved in organoleptic quality were evaluated. Physical traits included fruit weight, diameter, colour, firmness, and elasticity. Chemical traits were dry matter weight, titratable acidity, pH, and the contents of soluble solids, sugars, lycopene, carotene, and 12 aroma volatiles. A panel of trained assessors quantified sensory attributes: flavour (sweetness and sourness), aroma (overall aroma intensity, together with candy, lemon, citrus fruit, and pharmaceutical aromas) and texture (firmness, meltiness, mealiness, juiciness, and skin difficult to swallow). RILs showed a large range of variation. Molecular markers were used to map a total of 130 quantitative trait loci (QTL) for the 38 traits. They were mainly distributed in a few chromosome regions. Major QTLs (R(2) >30%) were detected for fruit weight, diameter, colour, firmness, meltiness, and for six aroma volatiles. The relationships between instrumental measures and sensory traits were analysed with regard to the QTL map. A special insight was provided about the few regions where QTLs are related to multiple traits. A few examples are shown to illustrate how the simultaneous analysis of QTL segregation for related traits may aid in understanding the genetic control of quality traits and pave the way towards QTL characterization.     

Genetic analysis of organoleptic quality in fresh market tomato. 1. Mapping QTLs for physical and chemical traits

Improving organoleptic quality is an important but complex goal for fresh market tomato breeders. A total of 26 traits involved in organoleptic quality variation were evaluated, in order to understand the genetic control of this characteristic. A recombinant inbred line (RIL) population was developed from an intraspecific cross between a cherry tomato line with a good overall aroma intensity and an inbred line with a common taste but with bigger fruits. Physical traits included fruit weight, diameter, color (L,a,b), firmness and elasticity. Chemical traits were dry matter weight, titratable acidity, pH, and the contents of soluble solids, sugars, lycopene, carotene and 12 aroma volatiles. RILs showed a large range of variation for most of the traits and many of them were transgressive. Some correlations between aroma volatiles were in accordance with the metabolic pathway they originated from. A total of 81 significant QTLs were detected for the 26 traits by simple and composite interval mapping. They were mainly distributed in a few regions on chromosomes 2, 3, 4, 8, 9, 11 and 12. Major QTLs (R²>30%) were detected for fruit weight, diameter, and color, and for six aroma volatiles. Co-localization of QTLs controlling correlated traits was mainly found on chromosome 2. QTLs for fruit weight and sugar content or dry matter weight were often co-localized. However, a QTL for soluble-solids content and dry matter weight have been detected on chromosome 9 in a region without fruit weight QTLs. QTLs for seven aroma volatiles, lycopene content and fruit color were also co-localized. The QTL localizations were compared with those detected in crosses between Lycopersicon esculentum and wild tomato species. Received: 19 January 2000 / Accepted: 26 May 2000     

Identification of QTLs for early blight ( Alternaria solani) resistance in tomato using backcross populations of a Lycopersicon esculentum x L. hirsutum cross

Most commercial cultivars of tomato, Lycopersicon esculentum Mill., are susceptible to early blight (EB), a devastating fungal ( Alternaria solani Sorauer) disease of tomato in the northern and eastern parts of the U.S. and elsewhere in the world. The disease causes plant defoliation, which reduces yield and fruit quality, and contributes to significant crop loss. Sources of resistance have been identified within related wild species of tomato. The purpose of this study was to identify and validate quantitative trait loci (QTLs) for EB resistance in backcross populations of a cross between a susceptible tomato breeding line (NC84173; maternal and recurrent parent) and a resistant Lycopersicon hirsutum Humb. and Bonpl. accession (PI126445). Sixteen hundred BC(1) plants were grown to maturity in a field in 1998. Plants that were self-incompatible, indeterminant in growth habit, and/or extremely late in maturity, were discarded in order to eliminate confounding effects of these factors on disease evaluation, QTL mapping, and future breeding research. The remaining 145 plants (referred to as the BC(1) population) were genotyped for 141 restriction fragment length polymorphism (RFLP) markers and 23 resistance gene analogs (RGAs), and a genetic linkage map was constructed. BC(1) plants were evaluated for disease symptoms throughout the season, and the area under the disease progress curve (AUDPC) and the final percent defoliation (disease severity) were determined for each plant. BC(1) plants were self-pollinated and produced BC(1)S(1) seed. The BC(1)S(1) population, consisting of 145 BC(1)S(1) families, was grown and evaluated for disease symptoms in replicated field trials in two subsequent years (1999 and 2000) and AUDPC and/or final percent defoliation were determined for each family in each year. Two QTL mapping approaches, simple interval mapping (SIM) and composite interval mapping (CIM), were used to identify QTLs for EB resistance in the BC(1) and BC(1)S(1) populations. QTL results were highly consistent across generations, years and mapping approaches. Approximately ten significant QTLs (LOD >/= 2.4, P 57% of the total phenotypic variation. All QTLs had the positive alleles from the disease-resistant parent. The good agreement between results of the BC(1) and 2 years of the BC(1)S(1) generations indicated the stability of the identified QTLs and their potential usefulness for improving tomato EB resistance using marker-assisted selection (MAS). Further inspections using SIM and CIM indicated that six of the ten QTLs had independent additive effects and together could account for up to 56.4% of the total phenotypic variation. These complementary QTLs, which were identified in two generations and 3 years, should be the most useful QTLs for MAS and improvement of tomato EB resistance using PI126445 as a gene resource. Furthermore, the chromosomal locations of 10 of the 23 RGAs coincided with the locations of three QTLs, suggesting possible involvement of these RGAs with EB resistance and a potential for identifying and cloning genes which confer EB resistance in tomato.     

Identification of quantitative trait loci associated with rice eating quality traits using a population of recombinant inbred lines derived from a cross between two temperate japonica cultivars

Improved eating quality is a major breeding target in japonica rice due to market demand. In this study, we performed genetic analysis to identify quantitative trait loci (QTLs) that control rice eating quality traits using 192 recombinant inbred lines (RILs) derived from a cross between two japonica cultivars, 'Suweon365' and 'Chucheongbyeo'. We evaluated the stickiness (ST) and overall evaluation (OE) of cooked rice using a sensory test, the glossiness of cooked rice (GCR) using a Toyo-taste meter, and measured the amylose content (AC), protein content (PC), alkali digestion value (ADV), and days to heading (DH) of the RILs in the years 2006 and 2007. Our analysis revealed 21 QTLs on chromosomes 1, 4, 6, 7, 8, and 11. QTLs on chromosomes 6, 7, and 8 were detected for three traits related to eating quality in both years. QTLs for ST and OE were identified by a sensory test in the same region of the QTLs for AC, PC, ADV, GCR and DH on chromosome 8. QTL effects on the GCR were verified using QTL-NILs (near-isogenic lines) of BC(3)F(4-6) in the Suweon365 background, a low eating quality variety, and some BC(1)F(3) lines. Chucheongbyeo alleles at QTLs on chromosomes 7 and 8 increased the GCR in the NILs and backcrossed lines. The QTLs identified by our analysis will be applicable to future marker-assisted selection (MAS) strategies for improving the eating quality of japonica rice.     

Mapping of QTLs for lycopene and other fruit traits in a Lycopersicon esculentum × L. pimpinellifolium cross and comparison of QTLs across tomato species

Quantitative trait loci (QTLs) for several fruit traits in tomato were mapped and characterized in a backcross population of an interspecific cross between Lycopersicon esculentum fresh-marker breeding line NC84173 and L. pimpinellifolium accession LA722. A molecular linkage map of this cross that was previously constructed based on 119 BC1 individuals and 151 RFLP markers was used for the QTL mapping. The parental lines and 119 BC1S1 families (self-pollinated progeny of BC1 individuals) were grown under field conditions at two locations, Rock Spring, PA, and Davis, CA, and fruits were scored for weight (FW), polar (PD) and equatorial diameters (ED), shape (FS), total soluble solids content (SSC), pH and lycopene content (LYC). For each trait, between 4 and 10 QTLs were identified with individual effects ranging between 4.4% and 32.9% and multilocus QTL effects ranging between 39% and 75% of the total phenotypic variation. Most QTL effects were predictable from the parental phenotypes, and several QTLs were identified that affected more than one trait. A few pairwise epistatic interactions were detected between QTL-linked and QTL-unlinked markers. Despite great differences between PA and CA growing conditions, the majority of FW QTLs (78%) and SSC QTLs (75%) in the two locations shared similar genomic positions. Almost all of the QTLs that were identified in the present study for FW and SSC were previously identified in six other studies that used different interspecific crosses of tomato; this indicates conservation of QTLs for fruit traits across tomato species. Altogether, the seven studies identified at least 28 QTLs for FW and 32 QTLs for SSC on the 12 tomato chromosomes. However, for each trait a few major QTLs were commonly identified in 4 or more studies; such ‘popular’ QTLs should be of considerable interest for breeding purposes as well as basic research towards cloning of QTLs. Notably, a majority of QTLs for increased SSC also contributed to decreased fruit size. Therefore, to significantly increase SSC of the cultivated tomato, some compromise in fruit size may be unavoidable. This revised version was published online in June 2006 with corrections to the Cover Date.     

RFLP mapping of QTLs conferring cold tolerance during seed germination in an interspecific cross of tomato

Most cultivars of tomato, Lycopersicon esculentum, are sensitive to low (chilling) temperatures (0–15 °C) during seed germination; however, genetic sources of cold (chilling) tolerance have been identified within the related wild species. The purpose of this study was to identify quantitative trait loci (QTLs) that contribute to cold tolerance during germination in tomato using a backcross population of an interspecific cross between a cold-sensitive tomato line (NC84173, recurrent parent) and a L. pimpinellifolium accession (LA722) that germinates rapidly under low temperatures. A total of 119 BC1 individuals were genotyped for 151 restriction fragment length polymorphism (RFLP) markers and a genetic linkage map was constructed. The parental lines and 119 BC1S1 families (self-pollinated progeny of the BC1 individuals) were evaluated for germination at a low temperature (11±0.5 °C). Germination was scored visually as radicle protrusion at 8 h intervals for 28 consecutive days. Germination response was analyzed by the survival analysis and the times to 25, 50 and 75% germination were calculated. In addition, a germination index (GI) was calculated as the weighted mean of the time from imbibition to germination for each family/line. Two QTL mapping techniques, interval mapping (using MAPMAKER/QTL) and single-point analysis (using QGENE), were used to identify QTLs. The results of both methods were similar and two chromosomal locations (3–5 putative QTLs) with significant effects on low temperature germination were identified. The L. pimpinellifolium accession had favorable QTL alleles on chromosomes 1 and NC84173 had favorable QTL alleles on chromosome 4. The percentage of phenotypic variation explained (PVE) by individual QTLs ranged from 11.9% to 33.4%. Multilocus analysis indicated that the cumulative action of all significant QTLs accounted for 43.8% of the total phenotypic variance. Digenic epistatic interactions were evident between two of the QTL-linked markers and two unlinked markers. Transgressive phenotypes were observed in the direction of cold sensitivity. The results indicate that low temperature germination of tomato seed can be improved by marker-assisted selection.     

Marker-assisted introgression of Trypanotolerance QTL in mice

A marker-assisted introgression (MAI) experiment was conducted to use genetic markers to transfer each of the three trypanotolerance QTL from a donor mouse strain, C57BL/6, into a recipient mouse strain, A/J. We used a backcross strategy that consisted of selecting two lines, each carrying two of the donor QTL alleles through the backcross (BC) phase. At the fourth BC generation, single-carrier animals were selected for the production of homozygous animal in the intercross phase. The QTL regions (QTLR) were located on chromosomes MMU1, MMU5, and MMU17. Groups of mice with different genotypes and the parental lines were subjected to a challenge with Trypanosoma congolense. The results show that trypanotolerance QTL was successfully moved into the recipient background genotype, yielding a longer survival time. The mean estimated survival time was 57.9, 49.5, and 46.8 days for groups of mice carrying the donor QTL on MMU1, MMU5, and MMU17 on A/J background. The mean estimated survival time was 29.7 days for the susceptible A/J line and 68.8 days for the resistant C57BL/6 line. The estimated QTLR effects are close to 30% smaller than those in the original mapping population which was likely caused by the difference in the background on which the effects of QTLR are tested. This is the first report of successful marker-assisted introgression of QTL in animals. It is experimental proof of the use of genetic markers for marker-assisted introgression in animal breeding.Institut National des Recherches Agricoles du Bénin, 01 BP 884 COTONOU, République du Bénin     

Mapping quantitative trait loci in inbred backcross lines of Lycopersicon pimpinellifolium (LA1589).

Although tomato has been the subject of extensive quantitative trait loci (QTLs) mapping experiments, most of this work has been conducted on transient populations (e.g., F2 or backcross) and few homozygous, permanent mapping populations are available. To help remedy this situation, we have developed a set of inbred backcross lines (IBLs) from the interspecific cross between Lycopersicon esculentum cv. E6203 and L. pimpinellifolium (LA1589). A total of 170 BC2F1 plants were selfed for five generations to create a set of homozygous BC2F6 lines by single-seed descent. These lines were then genotyped for 127 marker loci covering the entire tomato genome. These IBLs were evaluated for 22 quantitative traits. In all, 71 significant QTLs were identified, 15% (11/71) of which mapped to the same chromosomal positions as QTLs identified in earlier studies using the same cross. For 48% (34/71) of the detected QTLs, the wild allele was associated with improved agronomic performance. A number of new QTLs were identified including several of significant agronomic importance for tomato production: fruit shape, firmness, fruit color, scar size, seed and flower number, leaf curliness, plant growth, fertility, and flowering time. To improve the utility of the IBL population, a subset of 100 lines giving the most uniform genome coverage and map resolution was selected using a randomized greedy algorithm as implemented in the software package MapPop (http://www.bio.unc.edu/faculty/vision/lab/ mappop/). The map, phenotypic data, and seeds for the IBL population are publicly available (http://soldb.cit.cornell.edu) and will provide tomato geneticists and breeders with a genetic resource for mapping, gene discovery, and breeding.     

Marker-assisted introgression of blackmold resistance QTL alleles from wild Lycopersicon cheesmanii to cultivated tomato (L. esculentum) and evaluation of QTL phenotypic effects

Blackmold, caused by the fungus Alternaria alternata, is a major ripe fruit disease of processing tomatoes. Previously, we found blackmold resistance in a wild tomato (Lycopersicon cheesmanii) and quantitative trait loci (QTL) for resistance were mapped in an interspecific population. Five QTLs were selected for introgression from L. cheesmanii into cultivated tomato using marker-assisted selection (MAS). Restriction fragment length polymorphism and PCR-based markers flanking, and within, the chromosomal regions containing QTLs were used for MAS during backcross and selfing generations. BC₁ plants heterozygous at the QTLs, and subsequent BC₁S₁ and BC₁S₂ lines possessing different homozygous combinations of alleles at the target QTLs, were identified using DNA markers. Field experiments were conducted in 1998 (with 80 marker-selected BC₁S₂ lines) and 1999 (with 151 marker-selected BC₁S₂ and BC₁S₃ lines) at three California locations. Blackmold resistance was assessed during both years, and horticultural traits were evaluated in 1999. The BC₁S₂ and BC₁S₃ lines containing L. cheesmanii alleles at the QTLs were associated with a large genetic variance for resistance to blackmold and moderate heritability, suggesting that significant genetic gain may be achieved by selection in this genetic material. L. cheesmanii alleles at three of the five introgressed QTLs showed a significant, positive effect on blackmold resistance. A QTL on chromosome 2 had the largest positive effect on blackmold resistance, alone and in combination with other QTLs, and was also associated with earliness, a positive horticultural trait. The other four QTLs were associated primarily with negative horticultural traits. Fine mapping QTLs using near isogenic lines could help determine if such trait associations are due to linkage drag or pleiotropy.     

Advanced backcross QTL analysis in a cross between an elite processing line of tomato and its wild relative L. pimpinellifolium

Approximately 170 BC2 plants from a cross between an elite processing inbred (recurrent parent) and the wild species Lycopersicon pimpinellifolium LA1589 (donor parent) were analyzed with segregating molecular markers covering the entire tomato genome. Marker data were used to identify QTLs controlling a battery of horticultural traits measured on BC2F1 and BC3 families derived from the BC2 individuals. Despite its overall inferior appearance, L. pimpinellifolium was shown to possess QTL alleles capable of enhancing most traits important in processing tomato production. QTL-NIL lines, containing specific QTLs modifying fruit size and shape, were subsequently constructed and shown to display the transgressive phenotypes predicted from the original BC2 QTL analysis. The potential of exploiting unadapted and wild germplasm via advanced backcross QTL analysis for the enhancement of elite crop varieties is discussed.     

The construction of a substitution library of recombinant backcross lines in Brassica oleracea for the precision mapping of quantitative trait loci.

The currently available methods for locating quantitative trait loci (QTLs) and measuring their effects in segregating populations lack precision unless individual QTLs have very high heritabilities. The use of recombinant backcross lines containing short regions of donor chromosome introgressed into a constant recipient background permits QTLs to be located with greater precision. The present paper describes the use of molecular markers to introgress defined short regions of chromosome from a donor doubled haploid calabrese line of Brassica oleracea (var. italica) into a recipient short generation variety (Brassica oleracea var. alboglabra). We demonstrate that in just two or three generations of backcrossing, combined with selection for mapped molecular markers, the generation of a library of recombinant backcross lines is feasible. The possible use and refinement of these lines are discussed. Key words : backcrossing, Brassica oleracea, introgression, molecular markers, near-isogenic lines, QTL mapping, recombinant backcross lines, substitution lines.     

Fine mapping of QTLs of chromosome 2 affecting the fruit architecture and composition of tomato

Negative correlations between quality traits and fruit size may hamper the breeding of fresh market tomato varieties for better organoleptic qualities. In a recent QTL analysis, QTLs with large effects on fruit weight, locule number and several quality traits were detected in the distal 50 cM of chromosome 2, but favorable alleles for fruit weight and locule number were unfavorable to quality traits. Substitution mapping was undertaken to determine whether the effects were due to a single QTL or to several tightly linked QTLs. Several chromosomal segments were characterized using near-isogenic lines. Five of them appeared to be involved in one or several traits. Considering the five segments from the top to the bottom of the region, the QTLs detected in each segment controlled the variation of: (1) fruit weight, (2) soluble solids content and dry matter weight, (3) fruit weight, (4) locule number and (5) fruit weight, dry matter weight, total sugars, titratable acidity and soluble solids content. This last cluster illustrates an antagonism between fruit weight and four quality traits, as favorable alleles are not conferred by the same parent in both cases. Nevertheless, several antagonistic QTLs were separated from each other in the first four segments, holding the promise for marker-assisted improvement of fruit quality traits without compromising the fruit size.     

Marker-Assisted Introgression of Quantitative Trait Loci

The use of molecular markers for the introgression of one or several superior QTL alleles into a recipient line is investigated using analytic and simulation results. The positions of the markers devoted to the control of the genotype at the QTLs in a ``foreground selection' step are optimized given the confidence interval of the QTL position. Results demonstrate that using at least three markers per QTL allows a good control over several generations. Population sizes that should be recommended for various numbers of QTLs are calculated and are used to determine the limit in the number of QTLs that can be monitored simultaneously. If ``background selection' devoted to accelerate the return to the recipient parent genotype outside the QTL regions is applied, the positions of the markers devoted to the control of the QTLs have to be reconsidered. When several QTLs are monitored simultaneously, background selection among the limited number of individuals resulting from the foreground selection step accelerates the increase in genomic similarity with the recipient parent, with only limited costs. Background selection is even more efficient in a pyramidal backcross program where QTLs are first monitored one by one.     

Marker-assisted introgression of 4 Phytophthora capsici resistance QTL alleles into a bell pepper line: validation of additive and epistatic effects

The aim of the present study was to transfer resistance to P. capsici alleles at four quantitative trait loci (QTLs) from a small fruited pepper into a bell pepper recipient line using markers. The marker-assisted selection program was initiated from a doubled-haploid line issued from the mapping population and involved three cycles of marker-assisted backcross (MAB). Two populations, derived by selfing the plants selected after the first selection cycle, were genotyped and evaluated phenotypically for their resistance level. The additive and epistatic effects of the four resistance factors were re-detected and validated in these populations, indicating that introgression of 4 QTLs in this MAB program was successful. A decrease of the effect for the moderate-effect QTLs and of the epistatic interaction was observed. Phenotypic evaluations of horticultural traits were performed on sample of each backcross generation. The results indicated an efficient return to the recipient phenotype using this MAB strategy.     

QTL analysis of plant development and fruit traits in pepper and performance of selective phenotyping

A QTL analysis was performed to determine the genetic basis of 13 horticultural traits conditioning yield in pepper (Capsicum annuum). The mapping population was a large population of 297 recombinant inbred lines (RIL) originating from a cross between the large-fruited bell pepper cultivar ‘Yolo Wonder’ and the small-fruited chilli pepper ‘Criollo de Morelos 334’. A total of 76 QTLs were detected for 13 fruit and plant traits, grouped in 28 chromosome regions. These QTLs explained together between 7% (internode growth time) and 91% (fruit diameter) of the phenotypic variation. The QTL analysis was also performed on two subsets of 141 and 93 RILs sampled using the MapPop software. The smaller populations allowed for the detection of a reduced set of QTLs and reduced the overall percentage of trait variation explained by QTLs. The frequency of false positives as well as the individual effect of QTLs increased in reduced population sets as a result of reduced sampling. The results from the QTL analysis permitted an overall glance over the genetic architecture of traits considered by breeders for selection. Colinearities between clusters of QTLs controlling fruit traits and/or plant development in distinct pepper species and in related solanaceous crop species (tomato and eggplant) suggests that shared mechanisms control the shape and growth of different organs throughout these species.     

Morphological variation in tomato: a comprehensive study of quantitative trait loci controlling fruit shape and development

Variation in fruit morphology is a prevalent characteristic among cultivated tomato. The genetic and developmental mechanisms underlying similarities and differences in shape between the fruit of two elongated tomato varieties were investigated. Fruit from two F2 populations constructed from either Solanum lycopersicum cv. Howard German or cv. Banana Legs crossed with S. pimpinellifolium accession LA1589, and one BC1 population constructed with S. lycopersicum Howard German as the recurrent parent, were analysed for shape by using a new software program Tomato Analyzer. Quantitative trait loci (QTLs) controlling 15 individual shape attributes were mapped by both single and multitrait composite interval mapping in each population. In addition, principal components analysis and canonical discriminant analysis were conducted on these shape attributes to determine the greatest sources of variation among and between the populations. Individual principal components and canonical variates were subjected to QTL analysis to map regions of the genome influencing fruit shape in the cultivars. Common and unique regions, as well as previously known and novel QTLs, underlying fruit morphology in tomato were identified. Four major loci were found to control multiple fruit shape traits, principal components, and canonical variates in the populations. In addition, QTLs associated with the principal components better revealed regions of the genome that varied among populations than did the QTL associated with canonical variates. The QTL identified can be compared across additional populations of tomato and other fruit-bearing crop species.