In vitro selection of RNA aptamers that bind to colicin E3 and structurally resemble the decoding site of 16S ribosomal RNA

Colicin E3 is a ribonuclease that specifically cleaves at the site after A1493 of 16S rRNA in Escherichia coli ribosomes, thus inactivating translation. To analyze the interaction between colicin E3 and 16S rRNA, we used in vitro selection to isolate RNA ligands (aptamers) that bind to the C-terminal ribonuclease domain of colicin E3, from a degenerate RNA pool. Although the aptamers were not digested by colicin E3, they specifically bound to the protein (K(d) = 2-14 nM) and prevented the 16S rRNA cleavage by the C-terminal ribonuclease domain. Among these aptamers, aptamer F2-1 has a sequence similar to that of the region around the cleavage site from residue 1484 to 1506, including the decoding site, of E. coli 16S rRNA. The secondary structure of aptamer F2-1 was determined by the base pair covariation among the variants obtained by a second in vitro selection, using a doped RNA pool based on the aptamer F2-1 sequence. The sequence and structural similarities between the aptamers and 16S rRNA provide insights into the recognition of colicin E3 by this specific 16S rRNA region.     

Purification and molecular properties of a new colicin.

The process of isolation and purification of a new colicin isolated from a Citrobacter strain is described. Escherichia coli sensitive cells are protected by vitamin B12 from the action of this bacteriocin; this suggests that it belongs to the E group of colicins. Therefore, we have called it colicin E4. It has a molecular weight of 56 000 and two molecular forms of isoelectric points 9.4 and 8.2 are separated in electrofocusing on polyacrylamide gels. It has a sedimentation coefficient of 3.4 S and the absorption coefficient A1(280%) nm is 6.23 cm(-1). Using an antibody raised against pure colicin E4, no cross-reaction was detected against colicins A, E1 or K. The physiological effect of colicin E4 on sensitive cells is very similar to that of colicins E1, K or I which disrupt the energized membrane state.     

Translocation of colicin E1 through cytoplasmic membrane of Escherichia coli

The product of the malE—lacZ gene fusion was reported to compete with some proteins including outer membrane lipoprotein in the protein translocation across the Echerichia coli membrane. The fusion product also inhibited colicin E1 export. Furthermore, globomycin, which accumulated prolipoprotein in the membrane, inhibited the translocation of colicin E1 in the wild-type cells, but not in lipoprotein-negative mutant cells. Since colicin E1 contains the internal signal-like sequence [Proc. Natl. Acad. Sci. USA (1982) 79, 2827–2831], these results suggest that colicin E1 is exported by the aid of this sequence at a common site for maltose-binding protein and lipoprotein translocation.     

A hybrid toxin from bacteriophage f1 attachment protein and colicin E3 has altered cell receptor specificity.

A hybrid protein was constructed in vitro which consists of the first 372 amino acids of the attachment (gene III) protein of filamentous bacteriophage f1 fused, in frame, to the carboxy-terminal catalytic domain of colicin E3. The hybrid toxin killed cells that had the F-pilus receptor for phage f1 but not F- cells. The activity of the hybrid protein was not dependent upon the presence of the colicin E3 receptor, BtuB protein. The killing activity was colicin E3 specific, since F+ cells expressing the colicin E3 immunity gene were not killed. Entry of the hybrid toxin was also shown to depend on the products of tolA, tolQ, and tolR which are required both for phage f1 infection and for entry of E colicins. TolB protein, which is required for killing by colicin E3, but not for infection by phage f1, was also found to be necessary for the killing activity of the hybrid toxin. The gene III protein-colicin E3 hybrid was released from producing cells into the culture medium, although the colicin E3 lysis protein was not present in those cells. The secretion was shown to depend on the 18-amino-acid-long gene III protein signal sequence. Deletion of amino acids 3 to 18 of the gene III moiety of the hybrid protein resulted in active toxin, which remained inside producing cells unless it was mechanically released.     

Interaction of 125I-Labeled Colicin E1 with Escherichia coli

Colicin E1 protein was labeled with ¹²⁵I to specific activities of up to 2 × 10⁸ cpm/mg of protein and with no loss of the colicin biological activity. The labeled colicin bound to colicin E1-sensitive, tolerant, and immune E1-colicinogenic Escherichia coli. An E. coli mutant resistant to colicin E1 exhibited a much lower colicin-binding capacity. The average number of bound colicin molecules per sensitive cell increased as a function of the colicin concentration in the colicin cell interaction mixture and continued to increase even after loss of viability of the entire culture. Up to 2,400 colicin E1 molecules bound per cell, but saturation was not reached. Binding kinetics showed that maximum binding occurred within 2 to 5 min of colicin addition. Survival and binding assays indicated that one colicin killing unit corresponded to an average of about 100 colicin molecules bound per bacterial cell. This number, however, decreased to about 8 in more extensively washed cells. Trypsin digestion of the colicin-treated cells removed the majority of the cell-bound colicin, but in general provided little rescue from colicin killing. At low colicin concentrations, a linear relationship existed between survival and the number of trypsin-inaccessible colicin molecules. Under these circumstances and in agreement with single-hit kinetics, the relationship between the number of colicin killing units and the number of trypsin-inaccessible colicin molecules was close to 1. After trypsin digestion, cells that were nearly saturated with colicin retained about 200 trypsin-inaccessible colicin molecules per cell. The trypsin-inaccessible colicin might represent those colicin molecules that bound to the specific E colicin receptors of E. coli cells.     

Factors necessary for the export process of colicin E1 across cytoplasmic membrane of Escherichia coli

Factors necessary for the export process of colicin E1 across the cytoplasmic membrane of Escherichia coli were investigated. beta-Galactosidase activities from gene fusions between the colicin E1 and lacZ genes were recovered in the inner membrane fraction of E. coli when the region containing the internal signal-like sequence of colicin E1 [M. Yamada et al. (1982) Proc. Natl Acad. Sci. USA 79, 2827-2831] was present, but were found in the soluble fraction when the region was eliminated. The colicin E1 export was reduced upon insertion mutation in a gene that is located downstream from the colicin E1 gene in the same operon and responsible for mitomycin-C-induced killing of the host cell. A frame shift mutation of the colicin E1 plasmid was constructed to direct the protein which had lost the COOH-terminal 13 residues of original colicin E1 and was altered in 6 residues of the new COOH-terminal portion. The aberrant colicin E1 that was inducibly synthesized remained inside the cells. These results indicate that colicin E1 is exported with the aid of a product of the downstream gene and that the COOH-terminal portion is necessary for the export. The binding of colicin E1 to the cytoplasmic membrane through the internal signal-like sequence may be a step in the protein export process.     

Effect of base substitutions in the colicin E1 gene on colicin E1 export and bacteriocin activity

Summary Base substitutions have been introduced into the segment of the colicin E1 gene corresponding to the polypeptide region between the 404th and the 502nd residues which was considered to participate in colicin E1 export and bacteriocin activity. The methods used were in vitro localized mutagenesis with sodium bisulphite and in vivo mutagenesis using either nitrosoguanidine or ethyl methane sulphonate. Cells carrying mutagenized plasmids were screened by their inability to form a clear zone on a lawn of colicin E1 sensitive cells. Mutation sites were determined from the nucleotide sequence analysis and the altered amino acid residues were reduced. The mutant proteins were analysed for their ability to be exported to the periplasmic space and for their bacteriocin activity. Out of eight mutants obtained, three had a single amino acid replacement. Mutant proteins that had Ser and Glu in place of Pro-462 and Gly-502, respectively, showed a decrease in both the export and the bacteriocin activity. A mutant protein having Arg in place of Gly-439 showed a decrease only in the bacteriocin activity. These results suggest that the target region of colicin E1 contributes to the export as well as the bacteriocin activity but the two functions are supported in part by different amino acid residues of the protein.     

Colicin E3 is an endonuclease.

It was confirmed by polyacrylamide gel electrophoresis that isolated 16S rRNA was cleaved by the active component (protein A) or the active fragment (T2A) of colicin E3. However, the degradation was random, in contrast with the specific cleavage observed in the interaction of colicin E3 with ribosomes. Furthermore, the active component and the active fragment had low activities, and far greater amounts of these materials were required for degradation of the isolated rRNA than for ribosome inactivation. The degradation of rRNA cannot be due to contaminating ribonuclease(s), but is due to colicin E3 itself, because of the following facts. (1) Protein B of colicin E3, which specifically inhibits the ribosome-inactivating activity of colicin E3, inhibited the degradation of rRNA. (2) Protein B of colicin E2, which inhibits the action of colicin E2 but not of colicin E3, failed to inhibit the degradation of rRNA. (3) The activity appeared in the peak of protein A or fragment T2A, respectively, when they were rechromatographed on Sephadex G-75.     

A 76-residue polypeptide of colicin E9 confers receptor specificity and inhibits the growth of vitamin B12-dependent Escherichia coli 113/3 cells

The mechanism by which E colicins recognize and then bind to BtuB receptors in the outer membrane of Escherichia coli cells is a poorly understood first step in the process that results in cell killing. Using N- and C-terminal deletions of the N-terminal 448 residues of colicin E9, we demonstrated that the smallest polypeptide encoded by one of these constructs that retained receptor-binding activity consisted of residues 343-418. The results of the in vivo receptor-binding assay were supported by an alternative competition assay that we developed using a fusion protein consisting of residues 1-497 of colicin E9 fused to the green fluorescent protein as a fluorescent probe of binding to BtuB in E. coli cells. Using this improved assay, we demonstrated competitive inhibition of the binding of the fluorescent fusion protein by the minimal receptor-binding domain of colicin E9 and by vitamin B12. Mutations located in the minimum R domain that abolished or reduced the biological activity of colicin E9 similarly affected the competitive binding of the mutant colicin protein to BtuB. The sequence of the 76-residue R domain in colicin E9 is identical to that found in colicin E3, an RNase type E colicin. Comparative sequence analysis of colicin E3 and cloacin DF13, which is also an RNase-type colicin but uses the IutA receptor to bind to E. coli cells, revealed significant sequence homology throughout the two proteins, with the exception of a region of 92 residues that included the minimum R domain. We constructed two chimeras between cloacin DF13 and colicin E9 in which (i) the DNase domain of colicin E9 was fused onto the T+R domains of cloacin DF13; and (ii) the R domain and DNase domain of colicin E9 were fused onto the T domain of cloacin DF13. The killing activities of these two chimeric colicins against indicator strains expressing BtuB or IutA receptors support the conclusion that the 76 residues of colicin E9 confer receptor specificity. The minimum receptor-binding domain polypeptide inhibited the growth of the vitamin B12-dependent E. coli 113/3 mutant cells, demonstrating that vitamin B12 and colicin E9 binding is mutually exclusive.     

Mechanism of export of colicin E1 and colicin E3.

The mechanism of export of colicins E1 and E3 was examined. Neither colicin E1, colicin E3, Nor colicin E3 immunity protein appears to be synthesized as a precursor protein with an amino-terminal extension. Instead, the colicins, as well as the colicin E3 immunity protein, appear to leave the cells where they are made, long after their synthesis, by a nonspecific mechanism which results in increased permeability of the producing cells. Induction of ColE3-containing cells with mitomycin C leads to actual lysis of those cells, as some time after synthesis of the colicin E3 and its immunity protein has been completed. Induction of ColE1-containing cells results in increased permeability of the cells, but not in actual lysis, and most of the colicin E1 produced never leaves the producing cells. Intracellular proteins such as elongation factor G can be found outside of colicinogenic cells after mitomycin C induction, along with the colicin. Until substantial increases in permeability occur, most of the colicin remains cell associated, in the soluble cytosol, rather than in a membrane-associated form.     

Barley aleurone layers secrete a nuclease in response to gibberellic Acid : purification and partial characterization of the associated ribonuclease, deoxyribonuclease, and 3'-nucleotidase activities

Incubation of barley (Hordeum vulgare L. cv Himalaya) half-seeds with gibberellic acid enhances the secretion of ribonuclease and deoxyribonuclease from aleurone tissue (MJ Chrispeels, JE Varner 1967 Plant Physiol 42: 398-406; L Taiz, JE Starks 1977 Plant Physiol 60: 182-189). These activities were over 50-fold greater in medium of half-seeds incubated with gibberellic acid than in control medium. Ribonuclease and deoxyribonuclease activities initially appeared in the medium 24 to 48 hours after hormone induction and increased for up to 96 hours. Both activities had a pH optimum of 6.0 and a temperature optimum of 55°C. When the medium from gibberellic acid-treated half-seeds was analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis, the major ribonuclease and deoxyribonuclease activity bands comigrated. The two enzyme activities remained associated throughout a 2,700-fold purification employing ammonium sulfate fractionation, Heparin-Agarose affinity chromatography, and Reactive Blue 2-Agarose affinity chromatography. Also accompanying the ribonuclease and deoxyribonuclease activities throughout purification was the ability to hydrolyze the 3′-phosphoester linkage of 3′-AMP. The purified protein was composed of a single polypeptide with an apparent molecular weight of 36 kilodaltons as determined by sodium dodecyl sulfate polyacrylamide gel electrophoresis. It is concluded that in response to gibberellic acid, barley aleurone tissue secretes a nuclease having ribonuclease, deoxyribonuclease, and 3′-nucleotidase activities.     

The effect of nonreceptor adsorption on the lethal action of colicin E1

The survivability of Escherichia coli K12s cells has been studied after treatment with 125I-labeled colicin E1. It has been shown that for low amounts of adsorbed colicin the survivability follows single-hit kinetics. When the number of colicin molecules adsorbed exceeds approx. 50 per cell, deviation from single-hit kinetics occurs towards higher survivability. Colicin E1 adsorbed nonreceptorwise by the cell's surface has been shown to inhibit the lethal action of colicin E1 molecules adsorbed at specific receptors. This fact has been used in accounting for the elevated survivability of cells at high colicin doses. The functional significance of the phenomenon is discussed.     

The nucleotide sequence surrounding the promoter region of colicin E1 gene

The nucleotide sequence of 570 bp, covering the N-terminal portion of the colicin E1 gene, was determined. The sequence of the N-terminal four amino acids of the colicin E1 protein, determined by manual Edman degradation, agreed with that predicted from the nucleotide sequence. From analysis of the 5'-terminal sequences of RNAs synthesized in vitro, the promoter and operator regions of the colicin E1 gene were assigned. These data indicate the existence of two promoters, one of which is located in the coding region for colicin E1. DNA sequence homology of 16 bp was found between the putative operator regions of the colicin E1 and recA genes.     

Immunity protein is not required for the bactericidal activity of colicin E3

Plasmid pLAX3, carrying the colicin E3 gene, was used to direct the in vitro synthesis of a colicin E3* molecule totally devoid of its immunity protein. We established that this molecule is able to kill sensitive Escherichia coli cells in the total absence of immunity protein. Therefore, all of the information required for colicin E3 action is located on the colicin polypeptide itself. Furthermore, our studies indicated that immunity protein protects the C-terminal enzymatic part of native colicin E3 protein against proteolytic degradation before or during its translocation across the cell envelope. These results are discussed in relation to the mode of entry of colicin E3 into bacterial cells.     

Colicin A receptor: role of two Escherichia coli outer membrane proteins (OmpF protein and btuB gene product) and lipopolysaccharide.

ompF cells were completely resistant to colicin A, whereas btuB cells were partially resistant. The OmpF protein, in the presence of added lipopolysaccharide, inactivated colicin A. This inactivation was enhanced by added btuB gene product, btuB gene product with lipopolysaccharide did not inactivate colicin A. These data, together with the observation that vitamin B12 protected btuB+ cells from the killing effect of colicin A, suggest that the colicin A receptor in Escherichia coli K-12 is composed of the OmpF protein, the btuB gene product, and lipopolysaccharide.     

Synthesis and functioning of the colicin E1 lysis protein: comparison with the colicin A lysis protein.

The colicin E1 lysis protein, CelA, was identified as a 3-kDa protein in induced cells of Escherichia coli K-12 carrying pColE1 by pulse-chase labeling with either [35S]cysteine or [3H]lysine. This 3-kDa protein was acylated, as shown by [2-3H]glycerol labeling, and seemed to correspond to the mature CelA protein. The rate of modification and processing of CelA was different from that observed for Cal, the colicin A lysis protein. In contrast to Cal, no intermediate form was detected for CelA, no signal peptide accumulated, and no modified precursor form was observed after globomycin treatment. Thus, the rate of synthesis would not be specific to lysis proteins. Solubilization in sodium dodecyl sulfate of the mature forms of both CelA and Cal varied similarly at the time of colicin release, indicating a change in lysis protein structure. This particular property would play a role in the mechanism of colicin export. The accumulation of the signal peptide seems to be a factor determining the toxicity of the lysis proteins since CelA provoked less cell damage than Cal. Quasi-lysis and killing due to CelA were higher in degP mutants than in wild-type cells. They were minimal in pldA mutants.     

Ribosomal-type ribonucleic acid from rodent mitochondria

1. Highly purified mitochondria containing 3.0mug of RNA/mg of mitochondrial protein were prepared from rat liver by differential centrifugation. 2. RNA, labelled with [(32)P]P(i) or [(3)H]orotate, was isolated from these mitochondria by a phenol extraction method. The RNA sedimented at 15S and 13S on sucrose density gradients. Its nucleotide composition was 23% uridylate, 30% adenylate, 22% guanylate and 25% cytidylate. 3. RNA from mouse L cells was labelled with [(3)H]-uridine in the presence of 0.1mug of actinomycin D/ml to suppress the synthesis of cytoplasmic rRNA. The RNA isolated from crude L-cell mitochondria by a cold-phenol-sodium dodecyl sulphate method had components sedimenting at 15S and 12.5S. These components had an electrophoretic mobility on agarose-acrylamide gels of 21 and 12S(E) compared with 28 and 18S(E) for cytoplasmic rRNA. The nucleotide composition was 26% uridylate, 34% adenylate, 18% guanylate and 22% cytidylate. 4. RNA extracted from crude L-cell mitochondria by a hotphenol-sodium dodecyl sulphate method had an additional component sedimenting at 21S and having an electrophoretic mobility of 18S(E). It was probably DNA because of its sensitivity to deoxyribonuclease and its insensitivity to ribonuclease and alkali. It was present in nuclear fragments contaminating the crude mitochondrial fraction and could be removed by deoxyribonuclease or isopycnic-gradient centrifugation.     

Obligatory coupling of colicin release and lysis in mitomycin-treated Col+ Escherichia coli

Previous work has shown that Escherichia coli K12 strains carrying the small, high copy number ColE2-P9 plasmid produce large amounts of colicin and then lyse and release colicin when grown in broth culture containing mitomycin C. Strains carrying the larger, low copy number ColIa-CA53 plasmid produced much less colicin and did not lyse or discharge more than 15% of their colicin when grown under the same conditions. Naturally-occurring Col+ strains and E. coli K12 derivatives carrying different Col plasmids could be classified either as ColE2+-like or ColIa+-like according to whether or not they produced large amounts of colicin and lysed and discharged colicin when grown in the presence of mitomycin, and also by the size and presumed copy number of the Col plasmid they carried. Strains carrying multiple copies of the cloned colicin Ia structural gene produced large amounts of colicin but did not lyse or release colicin when grown in the presence of mitomycin. This result rules out the possibility that high level accumulation of colicin is sufficient to cause lysis. Conditions were sought under which colicin Ia could be released from the producing cells. It was found that mitomycin-treated cultures of strains carrying both ColE2 and ColIa plasmids released both colicins when they lysed, although colicin Ia release occurred later than colicin E2 release. It was also noted that colicin Ia-laden cells released their colicin when diluted into fresh culture medium.     

Inhibition of a ribosome-inactivating ribonuclease: the crystal structure of the cytotoxic domain of colicin E3 in complex with its immunity protein

BACKGROUND: The cytotoxicity of most ribonuclease E colicins towards Escherichia coli arises from their ability to specifically cleave between bases 1493 and 1494 of 16S ribosomal RNA. This activity is carried by the C-terminal domain of the colicin, an activity which if left unneutralised would lead to destruction of the producing cell. To combat this the host E. coli cell produces an inhibitor protein, the immunity protein, which forms a complex with the ribonuclease domain effectively suppressing its activity. RESULTS: We have solved the crystal structure of the cytotoxic domain of the ribonuclease colicin E3 in complex with its immunity protein, Im3. The structure of the ribonuclease domain, the first of its class, reveals a highly twisted central beta-sheet elaborated with a short N-terminal helix, the residues of which form a well-packed interface with the immunity protein. CONCLUSIONS: The structure of the ribonuclease domain of colicin E3 is novel and forms an interface with its inhibitor which is significantly different in character to that reported for the DNase colicin complexes with their immunity proteins. The structure also gives insight into the mode of action of this class of enzymatic colicins by allowing the identification of potentially catalytic residues. This in turn reveals that the inhibitor does not bind at the active site but rather at an adjacent site, leaving the catalytic centre exposed in a fashion similar to that observed for the DNase colicins. Thus, E. coli appears to have evolved similar methods for ensuring efficient inhibition of the potentially destructive effects of the two classes of enzymatic colicins.