Intracellular trafficking of polyamidoamine-poly(ethylene glycol) block copolymers in DNA delivery

The delivery of nucleic acids has the potential to revolutionize medicine by allowing previously untreatable diseases to be clinically addressed. Viral delivery systems have shown immunogenicity and toxicity dangers, but synthetic vectors have lagged in transfection efficiency. Previously, we developed a modular, linear-dendritic block copolymer architecture with high gene transfection efficiency compared to commercial standards. This rationally designed system makes use of a cationic dendritic block to condense the anionic DNA and forms complexes with favorable endosomal escape properties. The linear block provides biocompatibility and protection from serum proteins, and can be functionalized with a targeting ligand. In this work, we quantitate performance of this system with respect to intracellular barriers to gene delivery using both high-throughput and traditional approaches. An image-based, high-throughput assay for endosomal escape is described and applied to the block copolymer system. Nuclear entry is demonstrated to be the most significant barrier to more efficient delivery and will be addressed in future versions of the system.     

Arginine-rich cross-linking peptides with different SV40 nuclear localization signal content as vectors for intranuclear DNA delivery

The major barriers for intracellular DNA transportation by cationic polymers are their toxicity, poor endosomal escape and inefficient nuclear uptake. Therefore, we designed novel modular peptide-based carriers modified with SV40 nuclear localization signal (NLS). Core peptide consists of arginine, histidine and cysteine residues for DNA condensation, endosomal escape promotion and interpeptide cross-linking, respectively. We investigated three polyplexes with different NLS content (10?mol%, 50?mol% and 90?mol% of SV40 NLS) as vectors for intranuclear DNA delivery. All carriers tested were able to condense DNA, to protect it from DNAase I and were not toxic to the cells. We observed that cell cycle arrest by hydroxyurea did not affect transfection efficacy of NLS-modified carriers which we confirmed using quantitative confocal microscopy analysis. Overall, peptide carrier modified with 90?mol% of SV40 NLS provided efficient transfection and nuclear uptake in non-dividing cells. Thus, incorporation of NLS into arginine-rich cross-linking peptides is an adequate approach to the development of efficient intranuclear gene delivery vehicles.     

Recent advances in rational gene transfer vector design based on poly(ethylene imine) and its derivatives

The continually increasing wealth of knowledge about the role of genes involved in acquired or hereditary diseases renders the delivery of regulatory genes or nucleic acids into affected cells a potentially promising strategy. Apart from viral vectors, non-viral gene delivery systems have recently received increasing interest, due to safety concerns associated with insertional mutagenesis of retro-viral vectors. Especially cationic polymers may be particularly attractive for the delivery of nucleic acids, since they allow a vast synthetic modification of their structure enabling the investigation of structure-function relationships. Successful clinical application of synthetic polycations for gene delivery will depend primarily on three factors, namely (1) an enhancement of the transfection efficiency, (2) a reduction in toxicity and (3) an ability of the vectors to overcome numerous biological barriers after systemic or local administration. Among the polycations presently used for gene delivery, poly(ethylene imine), PEI, takes a prominent position, due to its potential for endosomal escape. PEI as well as derivatives of PEI currently under investigation for DNA and RNA delivery will be discussed.This review focuses on structure-function relationships and the physicochemical aspects of polyplexes which influence basic characteristics, such as complex formation, stability or in vitro cytotoxicity, to provide a basis for their application under in vivo conditions. Rational design of optimized polycations is an objective for further research and may provide the basis for a successful cationic polymer-based gene delivery system in the future.     

Enhancement of transfection by physical concentration of DNA at the cell surface

Efficient DNA transfection is critical for biological research and new clinical therapies, but the mechanisms responsible for DNA uptake are unknown. Current nonviral transfection methods, empirically designed to maximize DNA complexation and/or membrane fusion, are amenable to enhancement by a variety of chemicals. These chemicals include particulates, lipids, and polymer complexes that optimize DNA complexation/condensation, membrane fusion, endosomal release, or nuclear targeting, which are the presumed barriers to gene delivery. Most chemical enhancements produce a moderate increase in gene delivery and a limited increase in gene expression. As a result, the efficiency of transfection and level of gene expression after nonviral DNA delivery remain low, suggesting the existence of additional unidentified barriers. Here, we tested the hypothesis that DNA transfection efficiency is limited by a simple physical barrier: low DNA concentration at the cell surface. We used dense silica nanoparticles to concentrate DNA-vector (i.e. DNA-transfection reagent) complexes at the surface of cell monolayers; manipulations that increased complex concentration at the cell surface enhanced transfection efficiency by up to 8.5-fold over the best commercially available transfection reagents. We predict that manipulations aimed at optimizing DNA complexation or membrane fusion have a fundamental physical limit; new methods designed to increase transfection efficiency must increase DNA concentration at the target cell surface without adding to the toxicity.     

Modified branched peptides with a histidine-rich tail enhance in vitro gene transfection

Successful gene therapy depends on the development of efficient, non-toxic gene delivery systems. To accomplish this objective, our laboratory has focused on solid-phase synthesized peptide carriers, in which the amino acid sequence can be varied precisely to augment intracellular DNA transport. We previously determined that linear and branched co-polymers of histidine and lysine in combination with liposomes enhanced the efficiency of gene transfection. In this study, we have modified two branched histidine-lysine (HK) peptides by adding a histidine-rich tail. In a variety of cell lines, this histidine-rich tail markedly improved transfection efficiency, presumably by increasing the buffering capacity of the polymer. One polymer with a histidine-rich tail, H²K4bT, compared favorably with the commonly used transfection agents. Together with modification of our transfection protocol, these improved HK peptides alone, without liposomes, are the effective carriers of plasmids into a variety of cells. We anticipate that branched HK peptides will continue to be developed as carriers of nucleic acids for in vitro and in vivo applications.     

Extracellular barriers to in Vivo PEI and PEGylated PEI polyplex-mediated gene delivery to the liver

Polyplex-mediated gene therapy is a promising alternative to viral gene therapy. One challenge to these synthetic carriers is reduced transfection efficiencies in vivo compared to those achieved in vitro. Many of the intracellular barriers to gene delivery have been elucidated, but similar quantification of extracellular barriers to gene delivery remains a need. In this study, the unpackaging of polyplexes by serum proteins, soluble glycosaminoglycans, and an extracellular matrix extract was demonstrated by a YOYO-1 fluorescence quenching assay. Additionally, exposing polyplexes to serum or proteoglycans before in vitro transfection caused decreased cellular uptake of DNA. Lastly, PEI polyplexes and PEGylated PEI polyplexes were injected into the portal vein of mice, and the intrahepatic distributions of labeled DNA and polymer were assessed by confocal microscopy. PEI polyplexes delivered DNA to the liver, but extensive vector unpackaging was observed, with PEI primarily colocalized with the extracellular matrix. PEGylated polyplexes mediated less DNA delivery to the liver, possibly due to premature vector unpackaging in the blood. Through this work, both the blood and the extracellular matrix have been determined to be significant extracellular barriers to polyplex-mediated in vivo gene delivery to the liver.     

Transfection of Infectious RNA and DNA/RNA Layered Vectors of Semliki Forest Virus by the Cell-Penetrating Peptide Based Reagent PepFect6

Viral vectors have a wide variety of applications ranging from fundamental studies of viruses to therapeutics. Recombinant viral vectors are usually constructed using methods of reverse genetics to obtain the genetic material of the viral vector. The physicochemical properties of DNA and RNA make them unable to access cells by themselves, and they require assistance to achieve intracellular delivery. Non-viral delivery vectors can be used for this purpose if they enable efficient intracellular delivery without interfering with the viral life cycle. In this report, we utilize Semliki Forest virus (genus alphavirus) based RNA and DNA vectors to study the transfection efficiency of the non-viral cell-penetrating peptide-based delivery vector PepFect6 in comparison with that of the cationic liposome-based Lipofectamine 2000, and assess their impact on viral replication. The optimal conditions for transfection were determined for both reagents. These results demonstrate, for the first time, the ability of PepFect6 to transport large (13-19 kbp) constructs across the cell membrane. Curiously, DNA molecules delivered using the PepFect6 reagent were found to be transported to the cell nucleus approximately 1.5 hours later than DNA molecules delivered using the Lipofectamine 2000 reagent. Finally, although both PepFect6 and Lipofectamine 2000 reagents can be used for alphavirus research, PepFect6 is preferred because it does not induce changes in the normal cellular phenotype and it does not affect the normal replication-infection cycle of viruses in previously transfected cells.     

Systemic Agrobacterium tumefaciens-mediated transfection of viral replicons for efficient transient expression in plants

Plant biotechnology relies on two approaches for delivery and expression of heterologous genes in plants: stable genetic transformation and transient expression using viral vectors. Although much faster, the transient route is limited by low infectivity of viral vectors carrying average-sized or large genes. We have developed constructs for the efficient delivery of RNA viral vectors as DNA precursors and show here that Agrobacterium-mediated delivery of these constructs results in gene amplification in all mature leaves of a plant simultaneously (systemic transfection). This process, called "magnifection", can be performed on a large scale and with different plant species. This technology combines advantages of three biological systems (the transfection efficiency of A. tumefaciens, the high expression yield obtained with viral vectors, and the post-translational capabilities of a plant), does not require genetic modification of plants and is faster than other existing methods.     

聚乙烯亚胺转基因影响因素的测定及其优化

聚乙烯亚胺 (PEI)为阳离子多聚物 ,可浓缩DNA形成纳米级颗粒 ,作为基因释放载体转染真核细胞 .选用Mr2 5 0 0 0 ,分枝状的聚乙烯亚胺转染质粒 ,比较多种转基因效率的影响因素 .通过MTT法测定PEI对COS 7细胞的细胞毒性 .利用电泳阻滞实验测定PEI与DNA形成复合物时所需的比例 .通过PEI转染增强型绿色荧光蛋白的pEGFP质粒、编码β 半乳糖苷酶的pSVβ质粒 ,探索氯喹、白蛋白、血清、盐离子浓度、质粒剂量、细胞数量等对聚乙烯亚胺转基因效率的影响 .实验发现 ,PEI对细胞的毒性作用与剂量相关 .PEI DNA的N P比在 3 0以上方可完全结合DNA .溶酶体抑制剂氯喹可增加转染效率 .培养液中的白蛋白、血清会降低转染效率 .生理盐溶液作为配制PEI DNA复合物的溶媒 ,转染效率高于 5 %葡萄糖作为溶媒 .随着转染质粒剂量的增加 ,转染效率呈剂量依赖正效应 .聚乙烯亚胺是有效的体外真核细胞转染剂 ,可用于合成更复杂的基因释放载体 .     

Cationic lipid-mediated nucleic acid delivery: beyond being cationic

Realization of the potential of nucleic acids as drugs is intricately linked to their in vivo delivery. Cationic lipids demonstrated tremendous potential as safe, efficient and scalable in vitro carriers of nucleic acids. For in vivo delivery of nucleic acids, the extant two component liposomal preparations consisting of cationic lipids and nucleic acids have been largely found to be insufficient. Being a soft matter, liposomes readily respond to many physiological variables leading to complex component and morphological changes, thus confounding the efforts in a priori identification of a “competent” formulation. In the recent past many chemical moieties that provide advantage in facing the challenges of barriers in vivo, were incorporated into cationic lipids to improve the transfection efficiency. The cationic lipids, essential for DNA condensation and protection, definitely require additional components to be efficient in vivo. In addition, formulations of cationic lipid carriers with non-lipidic components, mainly peptides, have demonstrated success in in vivo transfection. The present review describes some recent successes of in vivo nucleic acid delivery by cationic lipids.     

Physicochemical properties of polymers: An important system to overcome the cell barriers in gene transfection

Delivery of the macromolecules including DNA, miRNA, and antisense oligonucleotides is typically mediated by carriers due to the large size and negative charge. Different physical (e.g., gene gun or electroporation), and chemical (e.g., cationic polymer or lipid) vectors have been already used to improve the efficiency of gene transfer. Polymer‐based DNA delivery systems have attracted special interest, in particular via intravenous injection with many intra‐ and extracellular barriers. The recent progress has shown that stimuli‐responsive polymers entitled as multifunctional nucleic acid vehicles can act to target specific cells. These nonviral carriers are classified by the type of stimulus including reduction potential, pH, and temperature. Generally, the physicochemical characterization of DNA‐polymer complexes is critical to enhance the transfection potency via protection of DNA from nuclease digestion, endosomal escape, and nuclear localization. The successful clinical applications will depend on an exact insight of barriers in gene delivery and development of carriers overcoming these barriers. Consequently, improvement of novel cationic polymers with low toxicity and effective for biomedical use has attracted a great attention in gene therapy. This article summarizes the main physicochemical and biological properties of polyplexes describing their gene transfection behavior, in vitro and in vivo. In this line, the relative efficiencies of various cationic polymers are compared. © 2015 Wiley Periodicals, Inc. Biopolymers 103: 363–375, 2015.     

A pH-sensitive polymer that enhances cationic lipid-mediated gene transfer.

The efficient release of nonviral gene carriers from endosomes is an important step for the successful delivery of DNA into the cell nucleus. A synthetic pH-sensitive anionic polymer, poly(propylacrylic acid) (PPAA), was designed to aid in endosomal escape of nonviral vectors and improve the transfection efficiencies with these vectors. Transfection of NIH3T3 fibroblasts with ternary physical mixtures of the cationic lipid DOTAP, pCMVbeta plasmid DNA, and PPAA showed marked enhancement of both gene expression levels and fraction of cells transfected compared to binary control mixtures of DOTAP and DNA. PPAA also significantly improved the serum-stability of DOTAP/DNA vectors. The DOTAP/DNA/PPAA vectors maintained high levels of transfection in media containing up to 50% serum. The striking enhancement of transfection efficiency with cationic lipid/DNA/PPAA mixtures, along with the enhanced serum-stability, suggests that PPAA may provide significant improvements for the in vivo intracellular delivery of drugs such as DNA, oligonucleotides, proteins, and peptides.     

Nature as a source of inspiration for cationic lipid synthesis

Synthetic gene delivery systems represent an attractive alternative to viral vectors for DNA transfection. Cationic lipids are one of the most widely used non-viral vectors for the delivery of DNA into cultured cells and are easily synthesized, leading to a large variety of well-characterized molecules. This review discusses strategies for the design of efficient cationic lipids that overcome the critical barriers of in vitro transfection. A particular focus is placed on natural hydrophilic headgroups and lipophilic tails that have been used to synthesize biocompatible and non-toxic cationic lipids. We also present chemical features that have been investigated to enhance the transfection efficiency of cationic lipids by promoting the escape of lipoplexes from the endosomal compartment and DNA release from DNA-liposome complexes. Transfection efficiency studies using these strategies are likely to improve the understanding of the mechanism of cationic lipid-mediated gene delivery and to help the rational design of novel cationic lipids.     

Functionalization with C-terminal cysteine enhances transfection efficiency of cell-penetrating peptides through dimer formation

Cell-penetrating peptides have the ability to stimulate uptake of macromolecular cargo in mammalian cells in a non-toxic manner and therefore hold promise as efficient and well tolerated gene delivery vectors. Non-covalent peptide-DNA complexes ("peptiplexes") enter cells via endocytosis, but poor peptiplex stability and endosomal entrapment are considered as main barriers to peptide-mediated delivery. We explore a simple, yet highly efficient, strategy to improve the function of peptide-based vectors, by adding one terminal cysteine residue. This allows the peptide to dimerize by disulfide bond formation, increasing its affinity for nucleic acids by the "chelate effect" and, when the bond is reduced intracellularly, letting the complex dissociate to deliver the nucleic acid. By introducing a single C-terminal cysteine in the classical CPP penetratin and the penetratin analogs PenArg and EB1, we show that this minor modification greatly enhances the transfection capacity for plasmid DNA in HEK293T cells. We conclude that this effect is mainly due to enhanced thermodynamic stability of the peptiplexes as endosome-disruptive chloroquine is still required for transfection and the effect is more pronounced for peptides with lower inherent DNA condensation capacity. Interestingly, for EB1, addition of one cysteine makes the peptide able to mediate transfection in absence of chloroquine, indicating that dimerisation can also improve endosomal escape properties. Further, the cytotoxicity of EB1 peptiplexes is considerably reduced, possibly due to lower concentration of free peptide dimer resulting from its stronger binding to DNA.     

Controlled delivery of plasmid DNA and siRNA to intracellular targets using ketalized polyethylenimine

A new polyethylenimine (PEI)-derived biodegradable polymer was synthesized as a nonviral gene carrier. Branches of PEI were ketalized, and capabilities of nucleic acid condensation and delivery efficiency of the modified polymers were compared with ones of unketalized PEI. Ketalized PEI was able to efficiently compact both plasmid DNA and siRNA into nucleic acids/ketalized PEI polyplexes with a range of 80-200 nm in diameter. Nucleic acids were efficiently dissociated from the polyplexes made of ketalized PEI upon hydrolysis. In vitro study also demonstrated that ketalization enhanced transfection efficiency of the polyplexes while reducing cytotoxicity, even at high N/ P ratios. Interestingly, transfection efficiency was found to be inversely proportional to molecular weights of ketalized PEI, while RNA interference was observed in the opposite way. This study implies that selective delivery of plasmid DNA and siRNA to the nucleus and the cytoplasm can be achieved by tailoring the structures of polymeric gene carriers.     

Tumor-targeted gene delivery using molecularly engineered hybrid polymers functionalized with a tumor-homing peptide

Before gene therapy can be used in clinical settings, safe and efficient DNA delivery systems must be developed to overcome a range of extra- and intracellular transport barriers. As a step toward the development of a modular, multifunctional gene delivery system to overcome these diverse barriers, we have developed a family of linear-dendritic "hybrid" polymers which contain functionalities for tissue targeting, minimization of nonspecific interactions, endosomal buffering, and DNA binding. Here, we demonstrate the rapid three-step, room-temperature, aqueous synthesis of hybrid polymers, as well as the functionalization of these polymers with a peptide targeting ligand that specifically binds to glucose-regulated protein-78 kDa (GRP-78), a clinically relevant tumor antigen identified in human cancer patients. These polymer systems can condense plasmid DNA into small nanoparticle structures (<210 nm) and transfect cells expressing GRP-78 with efficiencies that exceed that of branched polyethylenimine (bPEI), one of the best commercially available polymers for in vitro transfections. The synthetic approach described here may be useful for the rapid synthesis and optimization of polymer gene delivery systems bearing a range of diverse functional domains, and the specific GRP-78-targeted systems developed in this study may potentially have clinical applications in cancer gene therapy.     

Charge density and molecular weight of polyphosphoramidate gene carrier are key parameters influencing its DNA compaction ability and transfection efficiency

A series of polyphosphoramidates (PPAs) with different molecular weights (MWs) and charge densities were synthesized and examined for their DNA compaction ability and transfection efficiency. A strong correlation was observed between the transfection efficiency of PPA/DNA nanoparticles and the MW and net positive charge density of the PPA gene carriers in three different cell lines (HeLa, HEK293, and HepG2 cells). An increase in MW and net positive charge density of PPA carrier yielded higher DNA compaction capacity, smaller nanoparticles with higher surface charges, and higher complex stability against challenges by salt and polyanions. These favorable physicochemical properties of nanoparticles led to enhanced transfection efficiency. PPA/DNA nanoparticles with the highest complex stability showed comparable transfection efficiency as PEI/DNA nanoparticles likely by compensating the low buffering capacity with higher cellular uptake and affording higher level of protection to DNA in endolysosomal compartment. The differences in transfection efficiency were not attributed by any difference in cytotoxicity among the carriers, as all nanoparticles showed a minimal level of cytotoxicity under the transfection conditions. Using PPA as a model system, we demonstrated the structural dependence of transfection efficiency of polymer gene carrier. These results offer more insights into nanoparticle engineering for nonviral gene delivery.     

Structures of lipid-DNA complexes: supramolecular assembly and gene delivery

Recently, there has been a flurry of experimental work on understanding the supramolecular assemblies that are formed when cationic liposomes (CLs) are mixed with DNA. From a biomedical point of view, CLs (vesicles) are empirically known to be carriers of genes (sections of DNA) in nonviral gene delivery applications. Although viral-based carriers of DNA are presently the most common method of gene delivery, nonviral synthetic methods are rapidly emerging as alternative carriers, because of their ease of production and nonimmunogenicity (viral carriers very often evoke an undesirable and potentially lethal immune response). At the moment, cationic-lipid-based carriers have emerged as the most popular nonviral method to deliver genes in therapeutic applications, for example, CL carriers are used extensively in clinical trials worldwide. However, because the mechanism of transfection (the transfer of DNA into cells by CL carriers, followed by expression) of CL--DNA complexes remains largely unknown, the measured efficiencies are, at present, very low. The low transfection efficiencies of current nonviral gene delivery methods are the result of poorly understood transfection-related mechanisms at the molecular and self-assembled levels. Recently, work has been carried out on determining the supramolecular structures of CL--DNA complexes by the quantitative technique of synchrotron X-ray diffraction. When DNA is mixed with CLs (composed of mixtures of cationic DOTAP and neutral DOPC lipids), the resulting CL--DNA complex consists of a multilamellar structure (L(alpha)(C)) comprising DNA monolayers sandwiched between lipid bilayers. The existence of a different columnar inverted hexagonal (H(II)(C)) phase in CL--DNA complexes was also demonstrated using synchrotron X-ray diffraction. Ongoing functional studies and optical imaging of cells are expected to clarify the relationship between the supramolecular structures of CL--DNA complexes and transfection efficiency.