Extracellular factors responsible for the adaptation ofPseudomonas fluorescens batch cultures to unfavorable conditions

The culture liquid filtrate of an exponential-phasePseudomonas fluorescens batch culture added to anotherP. fluorescens culture at the moment of inoculation was found (1) to prevent or diminish cell adsorption of the flask walls, (2) to enhance the intensity of cell respiration, (3) to shorten the period of adaptation of LB-grown cells to growth in glucose-containing mineral M9 medium, (4) to stimulate bacterial growth at supraoptimum temperature (36°C) and pH values (4.8 and 9.2), and (5) to decrease the death rate of bacteria at the supraoptimum growth temperature. These results were interpreted as indicating thatP. fluorescens cultures produce two types of regulatory exometabolites similar to those revealed earlier inEscherichia coli andBacillus subtilis cultures: the direct-action adaptogenic factorX ₁ capable of increasing bacterial resistance to unfavorable growth conditions (temperature and pH) and factor of accelerated adaptation to new media. Both factors are presumably low-molecular-weight hydrophilic nonprotein compounds.     

Pore Size Dependence on Growth Temperature Is a Common Characteristic of the Major Outer Membrane Protein OprF in Psychrotrophic and Mesophilic Pseudomonas Species

Pseudomonas species adapt well to hostile environments, which are often subjected to rapid variations. In these bacteria, the outer membrane plays an important role in the sensing of environmental conditions such as temperature. In previous studies, it has been shown that in the psychrotrophic strain P. fluorescens MF0, the major porin OprF changes its channel size according to the growth conditions and could affect outer membrane permeability. Studies of the channel-forming properties of OprFs from P. putida 01G3 and P. aeruginosa PAO1 in planar lipid bilayers generated similar results. The presence of a cysteine- or proline-rich cluster in the central linker region is not essential for channel size modulations. These findings suggest that OprF could adopt two alternative conformations in the outer membrane and that folding is thermoregulated. In contrast, no difference according to growth temperature was observed for structurally different outer membrane proteins, such as OprE3 from the Pseudomonas OprD family of specific porins. Our results are consistent with the fact that the decrease in channel size observed at low growth temperature is a particular feature of the OprF porin in various psychrotrophic and mesophilic Pseudomonas species isolated from diverse ecological niches. The ability to reduce outer membrane permeability at low growth temperature could provide these bacteria with adaptive advantages.     

Assessment of a chemostat-coupled modified Robbins device to study biofilms

The combination of a modified Robbins device (MRD) attached to the effluent line of a continuous cultivation vessel was assessed by the adhesion of planktonic bacteria maintained at a controlled growth rate. This combination of a chemostat and an MRD provides a large number of sample surfaces for monitoring both the formation and control of biofilms over extended periods of time. This apparatus was used to monitor the colonization of two soil isolates,Pseudomonas fluorescens (EX101) andPseudomonas putida (EX102) onto silastic rubber surfaces. At a similar _rel, both bacteria attached to the silastic, howeverP. fluorescens formed confluent, dense biofilms in less than 24 h, whereasP. putida adhered as single cells or microcolonies after the same period. The metabolic activity, measured by INT-formazan formation, was similar for both organisms with a peak at 6 h of colonization and a subsequent decrease after 24 h. Long term colonization studies ofP. fluorescens produced a population of greater than 9.5 log cfu cm^–2 at 28 days demonstrating the advantages of the chemostat-MRD association. This technique proved to be successful for studying bacterial adhesion and biofilm formation in tubular devices by bacterial populations at controlled and low growth rates.     

Some properties of thePseudomonas fluorescens adhesin and antiadhesin

Some properties of the adhesion-modifying factors ofPseudomonas fluorescens are described. Adhesin, which promotes the adhesion ofP. fluorescens cells, is a hydrophobic compound of a protein nature with a molecular mass of more than 10 kDa located either at the cell surface or in the medium. Antiadhesin, which suppresses the adhesion ofP. fluorescens cells, is a thermolabile hydrophobic compound of a nonprotein nature with a molecular mass of less than 3 kDa. Heating makes antiadhesin hydrophilic. The role of adhesin and antiadhesin in the adhesion and adaptation ofP. fluorescens cells is discussed.     

Temperature management strategy for efficient gene expression in a thermally inducible <Emphasis Type="Italic">Escherichia coli</Emphasis>/bacteriophage system

In a two-phase operation, E. coli containing λSNNU1 (Q ⁻ S ⁻) in the chromosome is typically cultured at 33°C and cloned gene expression is induced by elevating the temperature. At least 40°C is necessary for complete induction of cloned gene expression; however, temperatures above 40°C have been shown to inhibit cloned gene expression. This suggests that a three-phase operation, which has an induction phase between the growth and production phases, may result in higher gene expression. In this study, optimal temperature management strategies were investigated for the three-phase operation of cloned gene expression in thermally inducible E. coli/bacteriophage systems. The optimal temperature for the induction phase was determined to be 40°C. When the temperature of the production stage was 33°C, the optimal time period for the induction phase at 40°C was determined to be 60 min. In contrast, when the temperature of the production phase was 37°C, the optimal period for the induction phase at 40°C was 20∼30 min. When the three-phase temperature and temporal profile were set at a growth phase of 33°C, an induction phase at 40°C for 30 min, and a production phase at 37°C, the highest level of cloned gene expression was achieved.     

Extracellular factors affecting the adhesion ofPseudomonas fluorescens cells to glass surfaces

Two factors affecting the adhesionof Pseudomonas fluorescens to glass surfaces were revealed in the culture liquid (CL) of this bacterium. One of these factors, adhesin, which is responsible for cell adhesion, was found to be a protein substance located both at the cell surface and in the CL. Bacterial cells grown in rich LB medium were less adhesive than cells grown in minimal M9 medium. The adhesive capacity of cells was independent of the growth phase. The other factor, antiadhesin (AA), which reduces cell adhesion, was found only in the CL. AA concentration in the CL increased with the culture age.     

Effects of circadian rhythms of fluctuating temperature on growth and biochemical composition of <Emphasis Type="Italic">Ulva pertusa</Emphasis>

The marcoalga Ulva pertusa was cultured under (20 ± 2)°C, (20 ± 4)°C, (20 ± 6)°C, (20 ± 8)°C and (20 ± 10)°C circadian rhythms of fluctuating temperature conditions, and constant temperature of 20°C was used as the control. The growth rate of macroalga at (20 ± 2)°C, (20 ± 4)°C and (20 ± 6)°C were significantly higher than that at constant temperature of 20°C, while growth rate at (20 ± 8)°C and (20 ± 10)°C were significantly lower than that at constant temperature of 20°C. The growth rate of macroalga was a quadratic function of the thermal amplitude. Such a growth model can be described by G = β ₀ + β ₁(TA) + β ₂(TA)², where G represents the relative growth rate, TA is thermal amplitude in degree Celsius, β ₀ is the intercept on the G axis, and β ₁ and β ₂ are the regression coefficients. The optimal thermal amplitude for the growth of thallus at mean temperature of 20°C was estimated to be ± 3.69°C. Analysis of biochemical composition at the final stages of thaulls growth revealed that diel fluctuating temperature caused various influences (P < 0.05). The content of chlorophyll, protein and total solute carbohydrate at (20 ± 2)°C and (20 ± 4)°C were slightly higher than those at constant temperature of 20°C, however no statistically significant differences were found among them (P > 0.05). While osmolytes (total solute carbohydrate and free proline) at (20 ± 10)°C were significantly higher than that at 20°C (P < 0.05). Therefore, more chlorophyll and carbohydrate production might account for the enhancement in the growth of macroalga at the diel fluctuating temperatures in the present study. Handling editor: S. M. Thomaz     

Listeria monocytogenes LO28: Surface Physicochemical Properties and Ability To Form Biofilms at Different Temperatures and Growth Phases

The surface physicochemical properties of Listeria monocytogenes LO28 under different conditions (temperature and growth phase) were determined by use of microelectrophoresis and microbial adhesion to solvents. The effect of these parameters on adhesion and biofilm formation by L. monocytogenes LO28 on hydrophilic (stainless steel) and hydrophobic (polytetrafluoroethylene [PTFE]) surfaces was assessed. The bacterial cells were always negatively charged and possessed hydrophilic surface properties, which were negatively correlated with growth temperature. The colonization of the two surfaces, monitored by scanning electron microscopy, epifluorescence microscopy, and cell enumeration, showed that the strain had a great capacity to colonize both surfaces whatever the incubation temperature. However, biofilm formation was faster on the hydrophilic substratum. After 5 days at 37 or 20°C, the biofilm structure was composed of aggregates with a three-dimensional shape, but significant detachment took place on PTFE at 37°C. At 8°C, only a bacterial monolayer was visible on stainless steel, while no growth was observed on PTFE. The growth phase of bacteria used to inoculate surfaces had a significant effect only in some cases during the first steps of biofilm formation. The surface physicochemical properties of the strain are correlated with adhesion and surface colonization.     

Molecular and functional properties of the psychrophilic elongation factor G from the Antarctic Eubacterium <Emphasis Type="Italic">Pseudoalteromonas haloplanktis</Emphasis> TAC 125

The molecular and functional properties of the elongation factor (EF) G from the psychrophilic Antarctic eubacterium Pseudoalteromonas haloplanktis (Ph) were studied. PhEF-G catalyzed protein synthesis in vitro that was inhibited by fusidic acid, an antibiotic specifically acting on EF-G. The EF interacted with GDP only in the presence of P. haloplanktis ribosome and fusidic acid with an affinity similar to that displayed by Escherichia coli EF-G. The psychrophilic translocase elicited a ribosome-dependent GTPase that was competitively inhibited by GDP, the slowly hydrolyzable GTP analog GppNHp, and the protein synthesis inhibitor ppGDP. The temperature dependence of the activity of PhEF-G reached its maximum at least 26°C beyond the growth temperature of P. haloplanktis (4–20°C). The heat inactivation profile of the ribosome-dependent GTPase of PhEF-G gave a temperature for half inactivation (46°C), significantly lower than that for half denaturation measured by either UV- (57°C) or fluorescence-melting (62°C). This finding was attributed to a different effect of the temperature on the catalytic domain with respect to that elicited on the other domains constituting the EF, thus confirming the differential molecular flexibility present in psychrophilic enzymes. A molecular model, based on the 3D coordinates of a thermophilic EF-G, showed differences only in connecting loops. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Effects of temperature and water activity on <Emphasis Type="Italic">Lecanicillium</Emphasis> spp. conidia germination and growth,and mycosis of <Emphasis Type="Italic">Pissodes strobi</Emphasis>

Selecting entomopathogenic fungal isolates for use as biocontrol agents requires an assessment of their growth and virulence characteristics as affected by environmental conditions. Here we demonstrate a wide temperature and moisture range for colony growth, effective conidial germination and virulence against Pissodes strobi Peck (white pine weevil) of several isolates of Lecanicillium Gams and Zare, an entomopathogenic fungus distributed worldwide and indigenous to forests on Vancouver Island, British Columbia, Canada. In order to examine the potential Lecanicillium as a biological control agent, the pathogenicity of isolates collected from different geographical locations on P. strobi cadavers was assessed, and colony growth at different temperatures was evaluated. Colony growth was evident between 5 and 30°C, with optimal growth occurring at 25°C. Various combinations of water activity (0.55, 0.76, 0.85 and 0.99 a _w) and temperature (10, 15, 20, and 25°C) were also used to evaluate environmental impacts on conidial germination and cumulative mycosis of adult P. strobi. Certain Lecanicillium isolates displayed xerophilic (0.85 a _w) or psychrophilic (10°C) growth optima. Ultimately, identifying the abiotic limits of this entomopathogenic fungus will be used to determine which isolates have potential for future in situ biocontrol trials.     

Bacterial Ortholog of Mammalian Translocator Protein (TSPO) with Virulence Regulating Activity

The translocator protein (TSPO), previously designated as peripheral-type benzodiazepine receptor, is a protein mainly located in the outer mitochondrial membrane of eukaryotic cells. TSPO is implicated in major physiological functions and functionally associated with other proteins such as the voltage-dependent anionic channel, also designated as mitochondrial porin. Surprisingly, a TSPO-related protein was identified in the photosynthetic bacterium Rhodobacter sphaeroides but it was initially considered as a relict of evolution. In the present study we cloned a tspO gene in Pseudomonas fluorescens MF37, a non-photosynthetic eubacterium and we used bioinformatics tools to identify TSPO in the genome of 97 other bacteria. P. fluorescens TSPO was recognized by antibodies against mouse protein and by PK 11195, an artificial ligand of mitochondrial TSPO. As in eukaryotes, bacterial TSPO appears functionally organized as a dimer and the apparent Kd for PK 11195 is in the same range than for its eukaryotic counterpart. When P. fluorescens MF37 was treated with PK 11195 (10⁻⁵ M) adhesion to living or artificial surfaces and biofilm formation activity were increased. Conversely, the apoptotic potential of bacteria on eukaryotic cells was significantly reduced. This effect of PK11195 was abolished in a mutant of P. fluorescens MF37 deficient for its major outer membrane porin, OprF. The present results demonstrate the existence of a bacterial TSPO that shares common structural and functional characteristics with its mammalian counterpart. This protein, apparently involved in adhesion and virulence, reveals the existence of a possible new inter kingdom signalling system and suggests that the human microbiome should be involuntarily exposed to the evolutionary pressure of benzodiazepines and related molecules. This discovery also represents a promising opportunity for the development of alternative antibacterial strategies.     

Production and characterization of esterase and lipase from <Emphasis Type="Italic">Haloarcula marismortui</Emphasis>

The present study was conducted to investigate the capability of Haloarcula marismortui to synthesize esterases and lipases, and the effect of physicochemical conditions on the growth and the production of esterases and lipases. Finally, the effect of NaCl concentration and temperature on esterase and lipase activities was studied using intracellular crude extracts. In order to confirm the genomic prediction about the esterase and lipase synthesis, H. marismortui was cultured on a rich medium and the crude extracts (intra- or extracellular) obtained were assayed for both activities using p-nitrophenyl esters and triacylglycerides as substrates. Studies on the kinetics of growth and production of esterase and lipase of H. marismortui were performed, reaching a maximum growth rate of 0.053 h⁻¹ and maximal productions of intracellular esterase and lipase of 2.094 and 0.722 U l⁻¹ using p-nitrophenyl valerate and p-nitrophenyl laurate, respectively. Both enzymes were produced as growth-associated metabolites. The effects of temperature, pH, and NaCl concentration on the growth rate and production of enzymes were studied by using a Box–Behnken response surface design. The three response variables were significantly influenced by the physicochemical factors and an interaction effect between temperature and NaCl concentration was also evidenced. The surface response method estimated the following maximal values for growth rate and productions of esterase and lipase: 0.086 h⁻¹ (at 42.5°C, pH 7.4, and 3.6 mol l⁻¹ NaCl), 2.3 U l⁻¹ (at 50°C, pH 7.5, and 4.3 mol l⁻¹ NaCl), and 0.58 U l⁻¹ (at 50°C, pH 7.6, and 4.5 mol l⁻¹ NaCl), respectively. Esterases were active at different salt concentrations, showing two optimal activities (at 0.5 and 5 mol l⁻¹ NaCl), which suggested the presence of two different esterases. Interestingly, in the absence of salt, esterase retained 50% residual activity. Esterases and lipase activities were maximal at 45°C and inactive at 75°C. This study represents the first report evidencing the synthesis of esterase and lipase by H. marismortui.     

The effect of temperature on growth characteristics and competitions of <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis> and <Emphasis Type="Italic">Oscillatoria mougeotii</Emphasis> in a shallow,eutrophic lake simulator system

Blue-green algal blooms formed by Microcystis and Oscillatoria often occur in shallow eutrophic lakes, such as Lake Taihu (China) and Lake Kasumigaura (Japan). Growth characteristics and competitions between Microcystis aeruginosa and Oscillatoria mougeotii were investigated using lake simulator systems (microcosms) at various temperatures. Oscillatoria was the superior competitor, which suppressed Microcystis, when temperature was <20°C, whereas the opposite phenomenon occurred at 30°C. Oscillatoria had a long exponential phase (20 day) and a low growth rate of 0.22 day⁻¹ and 0.20 day⁻¹ at 15°C and 20°C, respectively, whereas Microcystis had a shorter exponential phase (2–3 days) at 30°C and a higher growth rate (0.86 day⁻¹). Interactions between the algae were stronger and more complex in the lake simulator system than flask systems. Algal growth in the lake simulator system was susceptible to light attenuation and pH change, and algae biomasses were lower than those in flasks. The outcome of competition between Microcystis and Oscillatoria at different temperatures agrees with field observations of algal communities in Lake Taihu, indicating that temperature is a significant factor affecting competition between Microcystis and Oscillatoria in shallow, eutrophic lakes.     

Listeria monocytogenes LO28: surface physicochemical properties and ability to form biofilms at different temperatures and growth phases

The surface physicochemical properties of Listeria monocytogenes LO28 under different conditions (temperature and growth phase) were determined by use of microelectrophoresis and microbial adhesion to solvents. The effect of these parameters on adhesion and biofilm formation by L. monocytogenes LO28 on hydrophilic (stainless steel) and hydrophobic (polytetrafluoroethylene [PTFE]) surfaces was assessed. The bacterial cells were always negatively charged and possessed hydrophilic surface properties, which were negatively correlated with growth temperature. The colonization of the two surfaces, monitored by scanning electron microscopy, epifluorescence microscopy, and cell enumeration, showed that the strain had a great capacity to colonize both surfaces whatever the incubation temperature. However, biofilm formation was faster on the hydrophilic substratum. After 5 days at 37 or 20 degrees C, the biofilm structure was composed of aggregates with a three-dimensional shape, but significant detachment took place on PTFE at 37 degrees C. At 8 degrees C, only a bacterial monolayer was visible on stainless steel, while no growth was observed on PTFE. The growth phase of bacteria used to inoculate surfaces had a significant effect only in some cases during the first steps of biofilm formation. The surface physicochemical properties of the strain are correlated with adhesion and surface colonization.     

Exposure of Fischerella [Mastigocladus] to high and low temperature extremes: strain evaluation for a thermal mitigation process

In conjunction with a proposed algal cultivation scheme utilizing thermal effluent, twelve Fischerella strains were tested for tolerance to temperatures above and below their growth range. Exposure to 65 °C or 70 °C for 30 min caused bleaching and death of most or all cells. Effects of 60 °C exposure for periods of up to 2 h ranged from undetectable to severe for the various strains. Chlorophyll a content typically decreased 21–22% immediately following 60 °C or 65 °C (1 h) exposure. However, the 60 °C-shocked cultures regained normal Chl a content after 24 h at 45 °C, whereas Chl a in 65 °C-shocked cultures immediately lost visible autofluorescence and was later degraded. Exposure to 15 °C virtually stopped growth of all strains during a 48 h exposure period. Most strains grew as rapidly as 45 °C controls when restored to 45 °C, while a few strains recovered more slowly. Comparison with dark-incubated controls indicated that photooxidative damage did not occur during cold shock. Certain strains exhibited relatively rapid recovery from both heat and cold exposure, thus meeting the temperature tolerance criteria for the proposed algal cultivation process.     

Temperature dependence for development of the whitefly predator <Emphasis Type="Italic">Clitostethus arcuatus</Emphasis> (Rossi)

This work aimed to study the biology of Clitostethus arcuatus (Rossi) (Coleoptera: Coccinellidae) under different temperatures and evaluate the optimum temperature for its mass rearing. Studies were carried out in the laboratory at four constant temperatures (15°C, 20°C, 25°C and 30°C), 75 ± 5% relative humidity and a photoperiod of 16 h light:8 h dark, in which C. arcuatus was fed ad libitum with nymphs of all instar of Aleyrodes proletella L. (Homoptera: Aleyrodidae) on Brassicae oleracea L. (var. Costata). The following biological parameters were evaluated: development time and survival rates of pre-imaginal stages, adult longevity (female and male), length of the pre-oviposition and oviposition periods, fecundity, fertility and percentage of egg hatching. Population growth parameters, the lower development threshold and the sum of effective temperatures were estimated. Temperatures ranging from 20°C to 30°C were suitable for the development of C. arcuatus, suggesting that this species is well adapted to the temperatures usually found inside greenhouses or in open fields in temperate regions. Although the intrinsic rate of natural increase and doubling time were similar at 25°C and 30°C, the temperature of 25°C was shown to be the most suitable for mass rearing and development of populations under field conditions, since the percentage of egg hatching and the accumulated survival rates of the pre-imaginal stages were the highest. Considering the estimated lower threshold for pre-imaginal development (7.9°C) and the sum of effective temperatures [293.6 degree-days (°D)], it is predicted for Ponta Delgada (Azores, Portugal) that the first adults of C. arcuatus should emerge by the first fortnight of February and that up to 12 generations per year can occur.     

Adhesion of a <Emphasis Type="Italic">Pseudomonas putida</Emphasis> strain isolated from a paper machine to cellulose fibres

The adhesion to cellulose fibres of a strain of Pseudomonas putida isolated from a paper machine was studied under different environmental conditions. The physicochemical properties of both P. putida cells and cellulose fibres were also determined to better understand the adhesion phenomenon. Adhesion was rapid (1 min) and increased with time, cell concentration and temperature (from 25 to 40°C), indicating that bacterial adhesion to cellulose fibres is essentially governed by a physicochemical process. The P. putida cell surface was negatively charged, as shown by electrophoretic mobility measurements, and was hydrophilic due to a strong electron-donor character, as shown by the microbial adhesion to solvents method. Cellulose fibres were shown to be hydrophilic by contact angle measurements using the capillary rise method. These results suggest the importance of Lewis acid-base interactions in the adhesion process. In various ionic solutions (NaCl, KCl, CaCl₂ and MgCl₂), adhesion increased with increasing ionic strength up to 10–100 mM, indicating that, at low ionic strength, electrostatic interactions were involved in the adhesion process. An increase in the C/N ratio of the growth medium (from 5 to 90) decreased adhesion but this could not be related to changes in physicochemical properties, suggesting that other factors may be involved. In practice, temperature, ionic strength and nitrogen concentration must be taken into consideration to reduce bacterial contamination in the paper industry.     

Identification and characterization of a novel nitrilase from <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> Pf-5

Nitrile groups are catabolized to the corresponding acid and ammonia through one-step reaction involving a nitrilase. Here, we report the use of bioinformatic and biochemical tools to identify and characterize the nitrilase (NitPf5) from Pseudomonas fluorescens Pf-5. The nitPf5 gene was identified via sequence analysis of the whole genome of P. fluorescens Pf-5 and subsequently cloned and overexpressed in Escherichia coli. DNA sequence analysis revealed an open-reading frame of 921 bp, capable of encoding a polypeptide of 307 amino acids residues with a calculated isoelectric point of pH 5.4. The enzyme had an optimal pH and temperature of 7.0°C and 45°C, respectively, with a specific activity of 1.7 and 1.9 μmol min⁻¹ mg protein⁻¹ for succinonitrile and fumaronitrile, respectively. The molecular weight of the nitrilase as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration chromatography was 33,000 and 138,000 Da, respectively, suggesting that the enzyme is homotetrameric. Among various nitriles, dinitriles were the preferred substrate of NitPf5 with a K _m = 17.9 mM and k _cat/K _m = 0.5 mM⁻¹ s⁻¹ for succinonitrile. Homology modeling and docking studies of dinitrile and mononitrile substrate into the active site of NitPf5 shed light on the substrate specificity of NitPf5. Although nitrilases have been characterized from several other sources, P. fluorescens Pf-5 nitrilase NitPf5 is distinguished from other nitrilases by its high specific activity toward dinitriles, which make P. fluorescens NitPf5 useful for industrial applications, including enzymatic synthesis of various cyanocarboxylic acids.     

Genetic and physiological alterations occurring in a yeast population continuously propagated at increasing temperatures with cell recycling

This work investigated the effects of increasing temperature from 30°C to 47°C on the physiological and genetic characteristics of Saccharomyces cerevisiae strain 63M after continuous fermentation with cell recycling in a system of five reactors in series. Steady state was attained at 30°C, and then the temperature of the system was raised so it ranged from 35°C in the last reactor to 43°C in the first reactor or feeding reactor with a 2°C difference between reactors. After 15 days at steady state, the temperature was raised from 37°C to 45°C for 25 days at steady state, then from 39°C to 47°C for 20 days at steady state. Starter strain 63M was a hybrid strain constructed to have a MAT a/α, LYS/lys, URA/ura genotype. This hybrid yeast showed vigorous growth on plates at 40°C, weak growth at 41°C, positive assimilation of melibiose, positive fermentation of galactose, raffinose and sucrose. Of 156 isolates obtained from this system at the end of the fermentation process, only 17.3% showed the same characteristics as starter strain 63M. Alterations in mating type reaction and in utilization of raffinose, melibiose, and sucrose were identified. Only 1.9% of the isolates lost the ability to grow at 40°C. Isolates showing requirements for lysine and uracil were also obtained. In addition, cell survival was observed at 39–47°C, but no isolates showing growth above 41°C were obtained.     

Hydrophobicity and surface electrostatic charge of conidia of the mycoparasitic <Emphasis Type="Italic">Trichoderma</Emphasis> species

The present investigation was done to understand the fungal-fungal interactions mechanisms based on level of nonspecific adhesion of a potential fungal mycoparasite (Trichoderma) to their fungal host (Macrophomina phaseolina). The relative cell surface hydrophobicity (CSH) and cell surface electrostatic charge (CSEC) of 29 isolates of Trichoderma species, analyzed by bacterial adhesion to hydrocarbon (BATH), hydrophobic interaction chromatography (HIC), microelectrophoresis and contact angle, revealed a large degree of variability. CSH and CSEC of conidia depended on culture age, pH and temperature. Maximum CSH and CSEC were recorded in 25–28 °C range, and both declined significantly with increasing temperature. Isolate Trichoderma hazianum (Th)-23/98 expressed surface hydrophobicity at 25–28 °C and hydrophilicity at 40 °C. Surface hydrophobicity of the isolate was susceptible to various proteases (trypsin, pepsin, proteinase k and a-chymotrypsin) and inhibitors (SDS, mercaptoethanol and Triton X-100) and a significant reduction in CSH was recorded in hydrophobic conidia. Hydrophilic conidia remained more or less unaffected by such treatments. SDS-PAGE analysis of the hydrophobic and hydrophilic conidia exhibited several protein bands in the 25 to 61 kDa range. However, each protein population contained one protein that was not observed in the other population. For hydrophobic conidia, the unique protein had an apparent molecular mass of 49 kDa, while the unique protein associated with hydrophilic conidia had a molecular mass of 61 kDa. Our findings suggest that CSH and CSEC of mycoparasitic Trichoderma may contribute to non-specific adhesion on to the sclerotial surfaces of Macrophomina phaseolina that may be influenced by growth and environmental conditions.