Fluorescent-Antibody Study of Natural Finger-Like Zooloeae

Fluorescent-antibody techniques using Zoogloea ramigera 106 antiserum were used to study fresh activated sludge flocs and finger-like zoogloeae in the microbial film that developed over stored samples of activated sludge. Few cells in fresh activated sludge reacted positively with the fluorescein-labeled antiserum. Finger-like zoogloeae containing reactive cells were readily observed in the microbial film layer over stored activated sludge. Certain of the natural finger-like projections were entirely composed of cells that reacted positively to the labeled Z. ramigera 106 antiserum, whereas other projections were devoid of reactive cells.     

Restoration of the ability to settle bulking sludge by bacterial seeding in wastewater treatment

An attempt to restore the settling ability of denatured bulking sludge was under-taken by changing the microflora in waste treatment tanks. A cell suspension of mixed cultures of ten strains of bacteria, which were isolated from normal activated sludge from night soil plants, and a type culture Zoogloea ramigera IAM1236 was seeded into a laboratory-scale aeration tank containing bulking sludge collected from municipal night soil or a food processing (bean curd production) waste treatment plant. The tank was fed with synthetic wastewater or industrial waste and aerated for 22 days. After 5 days, the microflora in the sludge changed remarkably with the seeding of the bacterial culture; filamentous organisms disappeared and active protozoa (Vorticella sp., Epistylis sp., and Lecane sp.) appeared. The sludge became compact and settled rapidly. The SV₃₀ of the sludge temporarily increased, but in the end decreased from 97 to 20%. The CODcr value decreased from 300 to 20 ppm. In the tank without seeding, the sludge contained almost filamentous organisms only which floated and finally decomposed. The effects were confirmed by applied tests in 700-ton scale and 100-ton scale aeration tanks of municipal night soil and a food processing waste treatment plant, respectively.     

Remediation of Thiothrix spp. associated bulking problems by raw wastewater feeding: A full-scale experience

An industrial wastewater treatment plant (WWTP) in Australia has long suffered from bulking problems associated with the proliferation of Thiothrix spp. The WWTP consists of a covered anaerobic lagoon (CAL) followed by a sequencing batch reactor (SBR). The CAL functions as both an anaerobic digester and surge lagoon for the irregular flow of wastewater generated from the production of seasonal products. Chemical analysis of the raw influent showed it was composed of a mixture of organic acids, phenols and alcohols. The CAL effluent was characterised by high acetic acid and phenolic concentrations. An attempt was made to manipulate the SBR microbial community to improve settling by direct feeding small volumes of raw influent into the SBR. After raw feeding, the plant ceased bulking as the settled sludge volume reduced from 930 to 200 mL L^?1. 16S rRNA gene profiling and biovolumes of SBR samples revealed major changes in the microbial community. The Thiothrix spp. population decreased from 36.8% to 0.2%, and Zoogloea spp. dominated all samples after raw feeding. Therefore, direct feeding is proposed as a control method for industrial plants with surge/anaerobic lagoons in order to manage the bulking problems caused by Thiothrix spp. in downstream SBRs.     

Microbial Ecology of Activated Sludge: I. Dominant Bacteria

Over 300 bacterial strains were isolated from seven samples of activated sludge by plating on sewage agar. Gram-negative bacteria of the genera Zoogloea and Comamonas predominated. Many isolates (51%) showed sudanophilic inclusions of poly-β-hydroxybutyric acid, whereas 34% accumulated iodophilic material on media containing starch. A large number required either vitamins or amino acids, or both, for growth. None of the isolates tested for their ability to bring about changes in autoclaved sewage produced an effluent comparable in quality to the activated sludge control, although the Zoogloea did produce activated sludgelike flocs. A study of 150 bacterial strains isolated from raw sewage revealed that they differed from the sludge isolates in several respects. Coliforms, which constitute nearly a quarter of the sewage isolates, were rarely encountered in sludge.     

Isoprenoid quinones and fatty acids ofZoogloea

NineZoogloea strains including the type strain ofZ. ramigera (IAM 12136=ATCC 19544=N.C. Dondero 106) and newly isolated strains were investigated for isoprenoid quinone composition and whole-cell fatty acid profiles. Seven of the tested strains, having phenotypic properties typical ofZoogloea, were characterized by their production of both ubiquinone-8 and rhodoquinone-8 as major quinones, whereas the remaining two strains,Z. ramigera IAM 12669 (=K. Crabtree I-16-M) and IAM 12670 (=P.R. Dugan 115), formed ubiquinone-10 and ubiquinone-8, respectively, as the sole quinone. All rhodoquinone-producing strains contained palmitoleic acid and 3-hydroxy-decanoic acid as the major components of nonpolar and hydroxylated fatty acids, respectively. Marked differences were noted in the fatty acid composition between the strains with and without rhodoquinones. The chemotaxonomic data suggested that the rhodoquinonelacking strains should be excluded from the genusZoogloea. Since there have been no reliable taxonomic tools forZoogloea, rhodoquinone analysis may provide a new criterion of great promise for identifyingZoogloea strains.     

Use of Aromatic Compounds for Growth and Isolation of Zoogloea

Nine Zoogloea strains, were examined for their ability to utilize 35 aromatic compounds. Benzoate, m-toluate, and p-toluate, as well as phenol, o-cresol, m-cresol, and p-cresol, were utilized by eight strains. These strains exhibited meta cleavage of catechol and of methyl-substituted catechols. With the exception of L-tyrosine, none of the aromatic compounds tested supported growth of Z. ramigera ATCC 19623. A medium containing sodium m-toluate was used to isolate 37 zoogloea-forming bacteria from various polluted environments. The isolates were identified as strains of Zoogloea.     

Improved treatment of tannery wastewater using Zoogloea ramigera and its extracellular polymer in an activated sludge process

Summary When Zoogloea ramigera and its extracellular polymer were daily added to the laboratory scale activated sludge reactor treating tannery wastewater, more than 15% of the COD concentration (COD; 151 mg/l) and 32% of the turbidity (NTU; 9.2) were removed compared with a controlled reactor (COD; 336 mg/l, NTU; 43.5) operated without any additions.     

Isolation, Identification, and Metabolic Role of the Sudanophilic Granules of Zoogloea ramigera

Organisms isolated from activated sludge and identified as Zoogloea ramigera accumulated large amounts of sudanophilic granules as the cultures flocculated. The granules were extracted by chloroform and precipitated with ether from acid-hydrolyzed cells. Identification of the sudanophilic granules as poly-β-hydroxybutyric acid (PHB) was confirmed by physical, chemical, and infrared spectral analyses. The isolated polymer accounted for 12.0 to 50.5% of the dry weight of the cells. The polymer was not synthesized when the culture was grown in a growth-limiting concentration of organic substrate; it did accumulate when the culture was grown in medium enriched with carbon and energy sources. An increase in concentration of intracellular PHB was directly proportional to optical density and uptake of glucose. Aside from intracellular storage of PHB as endogenous metabolite, the accumulation of PHB is noted as a possible mechanism of flocculation.     

Structural investigation of the acidic polysaccharide secreted by Zoogloea ramigera 115

Batch-culture growth of Zoogloea ramigera 115 in a defined medium produced a weakly acidic polysaccharide containing glucose and galactose residues, and (S)-pyruvic acetal groups. Analytical results indicated that the polysaccharide does not have a simple repeating-unit. Mainly with the aid of Smith degradation of the native polysaccharide and oxidation and subsequent β-elimination of the methylated and then depyruvylated polysaccharide, some structural features of the polysaccharide were identified.     

Community Analysis of Ammonia and Nitrite Oxidizers during Start-Up of Nitritation Reactors

Partial nitrification of ammonium to nitrite under oxic conditions (nitritation) is a critical process for the effective use of alternative nitrogen removal technologies from wastewater. Here we investigated the conditions which promote establishment of a suitable microbial community for performing nitritation when starting from regular sewage sludge. Reactors were operated in duplicate under different conditions (pH, temperature, and dilution rate) and were fed with 50 mM ammonium either as synthetic medium or as sludge digester supernatant. In all cases, stable nitritation could be achieved within 10 to 20 days after inoculation. Quantitative in situ hybridization analysis with group-specific fluorescent rRNA-targeted oligonucleotides (FISH) in the different reactors showed that nitrite-oxidizing bacteria of the genus Nitrospira were only active directly after inoculation with sewage sludge (up to 4 days and detectable up to 10 days). As demonstrated by quantitative FISH and restriction fragment length polymorphism (RFLP) analyses of the amoA gene (encoding the active-site subunit of the ammonium monooxygenase), the community of ammonia-oxidizing bacteria changed within the first 15 to 20 days from a more diverse set of populations consisting of members of the Nitrosomonas communis and Nitrosomonas oligotropha sublineages and the Nitrosomonas europaea-Nitrosomonas eutropha subgroup in the inoculated sludge to a smaller subset in the reactors. Reactors operated at 30°C and pH 7.5 contained reproducibly homogeneous communities dominated by one amoA RFLP type from the N. europaea-N. eutropha group. Duplicate reactors at pH 7.0 developed into diverse communities and showed transient population changes even within the ammonia oxidizer community. Reactors at pH 7.5 and 25°C formed communities that were indistinguishable by the applied FISH probes but differing in amoA RFLP types. Communities in reactors fed with sludge digester supernatant exhibited a higher diversity and were constantly reinoculated with ammonium oxidizers from the supernatant. Therefore, such systems could be maintained at a higher dilution rate (0.75 day⁻¹ compared to 0.2 day⁻¹ for the synthetic wastewater reactors). Despite similar reactor performance with respect to chemical parameters, the underlying community structures were different, which may have an influence on stability during perturbations.     

Cost optimization of activated sludge systems

Activated sludge is a widely used aerobic biological waste-water treatment process. A rational approach to least cost design of an integrated system is described which includes the following processes: activated sludge reactor, final settling tanks, gravity thickening, and aerobic sludge digestion. Both capital and operation and maintenance costs are considered. Biological reactor design is based on microbial kinetic concepts and continuous culture of microorganisms theory. Biological solids retention time (θ_c) is utilized as the primary independent design variable to which system performance is related, e.g., effluent quality, ammonia oxidation, and excess sludge production. Liquid-biomass separation is based on the batch flux technique, a rational approach to design of gravity separators (final settling tanks). Trade-offs among reactor volume, clarifier size, recycle pumping capacity, thickener capacity, digester volume, air requirements, and sludge production are discussed. The optimum design is taken as the combination of these parameters within the acceptable design domain, determined by effluent quality criteria, that results in minimum cost. While the method described is general, design of a given treatment system depends on availability, from lab or pilot studies, of system specific numerical values for biological growth coefficients and biomass setting characteristics. A design example illustrates the approach.     

Effect of cadmium on composition and diversity of bacterial communities in activated sludges

Microbial communities of two kinds of activated sludge for removing carbon, nitrogen and phosphate (nutrient removal sludge) were identified and compared by combining cloning–denaturing gradient gel electrophoresis methods. The sludges were sampled in an anaerobic–anoxic–oxic system operating under the same conditions, except for one without the addition of cadmium (Cd0) and the other with addition of 5 mg cadmium l⁻¹ (Cd5). Bacteria in the phylum Proteobacteria were predominant in both Cd0 and Cd5 sludges (39.6% and 35.1% of total bacteria, respectively). However, bacteria in the class Betaproteobacteria were significantly more abundant in Cd0 than in Cd5 sludge (30.7% and 2.1%, respectively). Species related to nutrient removal, such as nitrifying bacteria (Nitrosomonas communis), floc-forming bacteria (Zoogloea ramigera) and phosphate-accumulating organisms (Rubrivivax gelatinosus), were the predominant species in Cd0 sludge, but were not found in Cd5 sludge. Cadmium was significantly toxic to the bacterial community in nutrient removal sludge, especially to the bacteria in the Betaproteobacteria. The comparison of microbial communities between these two kinds of sludge was further discussed in the paper.     

Characterization of sulfide-oxidizing microbial mats developed inside a full-scale anaerobic digester employing biological desulfurization

The microbial mats responsible for biological desulfurization from biogas in a full-scale anaerobic digester were characterized in terms of their structure, as well as their chemical and microbial properties. Filament-shaped elemental sulfur 100–500 μm in length was shown to cover the mats, which cover the entire headspace of the digester. This is the first report on filamentous sulfur production in a non-marine environment. The results of the analysis of the mats suggest that the key players in the sulfide oxidation and sulfur production in the bio-desulfurization in the headspace of the digester were likely to be two sulfide-oxidizing bacteria (SOB) species related to Halothiobacillus neapolitanus and Sulfurimonas denitrificans, and that the microbial community, cell density, activity for sulfide oxidation varied according to the environmental conditions at the various locations of the mats. Since the water and nutrients necessary for the SOB were provided by the digested sludge droplets deposited on the mats, and our results show that a higher rate of sulfide oxidation occurred with more frequent digested sludge deposition, the habitat of the SOB needs to be made in the lower part of the headspace near the liquid level of the digested sludge to maintain optimal conditions.     

Oxygen diffusion through zoogloeal flocs

The mechanism of oxygen transfer through a pure culture floc of Zoogloea ramigera I-16M has been described quantitatively. Oxygen uptake rates for both blended and nonblended floc particles indicated that, at a certain dissolved oxygen concentration, diffusion of oxygen through the floc matrix was the mechanism controlling the rate of oxygen utilization by the floc. This mechanism was quantitatively described by determining the oxygen diffusivity values for the floc. The diffusional distances of the floc particles along with the oxygen utilization rates of the floc were measured on floc grown under various conditions. Anoxic core equations were then used to calculate the oxygen diffusivity values for each experiment. These diffusivity values were then used to estimate the oxygen concentrations necessary in activated sludge plants.     

Application of adsorption isotherms to chromium adsorption onZ.ramigera

Summary Adsorption isotherms for the adsorption of chromium onZoogloea ramigera are developed. The rates were affected by the pH and temperature of adsorption medium. The biomass ofZ. ramigera at pH 2.0 where the optimum pH for biosorption lies exhibited the highest chromium adsorptive uptake capacity. In general, higher adsorptive uptake was observed at 25°C than 35°C and 45°C.     

Influence of polyaluminum chloride on microbial characteristics in anaerobic membrane bioreactors for sludge digestion

In this study, two parallel lab-scale anaerobic membrane bioreactors (AnMBRs), one of which was dosed with polyaluminum chloride (PAC) for membrane fouling control, were operated for treating excess activated sludge collected from a wastewater treatment plant (WWTP). The AnMBRs were inoculated with anaerobic digested sludge collected from an anaerobic digester of another WWTP. The microbial community of digested sludge and cake layer in AnMBRs, as well as that of excess sludge, was analyzed through polymerase chain reaction coupled with denaturing gradient gel electrophoresis (PCR-DGGE) and Illumina MiSeq. The dynamic variation of archaeal community in AnMBRs was not as obvious as that of bacterial community based on the PCR-DGGE results. Under the circumstance of stable operation, Cloacimonetes, Chloroflexi, Bacteroidetes, Proteobacteria, Firmicutes, and Ignavibacteriae were observed as the predominant phyla in digested sludge based on the Illumina results. In addition to that, the cake layer possessed similar predominant phyla with the digested sludge but owned a higher diversity. Furthermore, overlapping bacterial communities were discovered between the excess sludge and digested sludge. However, the abundance of aerobic bacteria was substantially reduced, while the abundance of anaerobic microorganisms like phylum Cloacimonetes and Smithella was enriched in digested sludge over time. Additional PAC dosing, on the one hand, affected the bioavailable substrate, thus further changing the microbial community structure; on the other hand, aluminum itself also affected specific microbial communities. Besides, PAC dosing indirectly influenced the bacterial diversity in AnMBR as well.

     

Thermochemical liquidization and anaerobic treatment of dewatered sewage sludge

Dewatered sewage sludge was thermochemically liquidized at 175°C and the liquidized sludge was separated by centrifugation to 57.7% (w/w) supernatant [moisture, 92.3%; volatile solid (VS), 7.0%] and 42.3% precipitate (moisture, 71.6%; VS, 18.9%). The supernatant was successfully anaerobically digested. Biogas yield from the supernatant at organic loading concentrations of 1.9–2.2 g VS/l during 9 days' incubation was 440 ml/g-added VS and digestion ratio was 66% (w/w). Biogas yield in the case of dewatered sewage sludge was 257% ml/g-added VS and digestion ratio was 45%. Digestion of the supernatant resulted in high biogas productivity and a high digestion ratio compared with that of the dewatered sewage sludge. Moreover, it was suggested that the precipitate can be incinerated without the need for any supplemental fuel.     

Microbial sulfate reduction at low (8 °C) temperature using waste sludge as a carbon and seed source

Biological treatment of sulfate and metal-containing wastewater (such as acid mine drainage) is a viable option due to lower cost and better sludge quality compared to conventional chemical treatment. Although several substrates can be used as carbon source, a low-cost substrate is required for large scale applications. This study was conducted to investigate the suitability of waste sludge as a carbon and seed source for sulfate reduction at 8 °C in batch bioassays. Around 7 mmol of sulfate was reduced when the waste sludge mixture (WS) (6700 mg SS l^?1) from primary and secondary settling tank was supplemented as a carbon and seed source. However, only 1.6 mmol of sulfate was reduced with anaerobic digester effluent (ADS) (5300 mg SS l^?1). The produced H₂S from 1 g VSS l^?1 WS and ADS oxidation can theoretically precipitate around 90 and 35 mg Fe²⁺, respectively. Both WS and ADS oxidized ethanol to acetate at similar rates. It appears that WS is a good candidate for carbon and start-up seed source of sulfate reduction at 8 °C, whereas sulfidogenic acetate oxidation was the limiting step. Denaturing gradient gel electrophoresis (DGGE) analysis of 16S rRNA genes showed that both sludge sources contain Desulfomicrobium apsheronum strain.     

Oxygen and nitrate reduction kinetics of a nonflocculating strain of Zoogloea ramigera

The oxygen and nitrate reduction kinetics of a nonflocculating strain of Zoogloea ramigera were determined. Axenic, nitrate-reducing bacterial suspensions were acclimated to various oxygen levels in a chemostat while measuring nitrate reduction in the presence of high ammonium nitrogen concentrations. Significant nitrate reduction was observed at oxygen concentrations up to 8 mg L^–1. Oxygen consumption was inhibited by oxygen concentrations in excess of 2 mg L^–1.