The Life Cycle of Chlorine, Part II: Conversion Processes and Use in the European Chemical Industry

The major purpose of this article is to construct a plausible emissions profile for the European chemical industry from process data and mass balance considerations.' In it we describe this industry and its major conversion processes and emissions. Four major process chains, beginning with methane, ethylene, propylene, and benzene are analyzed, along with five important stand-alone processes. A self-consistent version of the industry is constructed for 1992, based on data from a variety of sources.
In 1992 Europe consumed 9,297 metric kilotons as measured by weight of chlorine (kMT[CI]) of salt and 2 I I kMT(CI) of recycled hydrochloric acid (HCI) to produce 86 I0 kMT of virgin elemental chlorine, plus 278 kMT(CI) of virgin by-product HCI. Total chlorine input to the industry was 8,689 kMT including I2 kMT(CI) of recycled chlorinated hydrocarbons (CHCs) and (net) 79 kMT(CI) of HCI. Shipments of chlorine and HCI to other sectors was 1,367 kMT(CI), while 7,322 kMT(CI) was embodied in products or lost within the sector: Of this subtotal, 350 kMT(CI) was used to manufacture identified inorganic chemicals, 5,694 kMT(CI) for identified organic chemicals, and 1,278 kMT(CI) for "other unspecified" chemicals.
We estimate that products account for 41.6% of inputs (measured at the "fence"), while wastes account for 24.7%     

Life Cycle Assessment of a Magazine,Part II: A Comparison of Print and Tablet Editions

The rapid development of information and communications technology (ICT) is providing new ways to access media content. Electronic media are sometimes more advantageous from an environmental perspective than paper‐based media solutions, but ICT‐based media can also bring environmental burdens. This study compared the potential environmental impacts in a life cycle perspective of a print edition of a magazine and that of its electronic edition read on a tablet device. Important objectives were to identify activities giving rise to the main environmental impacts for both the print and tablet editions, determine the key factors influencing these impacts, and address data gaps and uncertainties. A detailed assessment of the tablet edition is provided in a previous article (part 1), whereas this article compares it with the print edition. The methodology used was life cycle assessment and the environmental impacts assessed included climate change, cumulative energy/exergy demand, metal depletion, photochemical oxidant formation, particulate matter formation, terrestrial acidification, freshwater eutrophication, marine eutrophication, and fossil depletion. Use of different functional units to compare the print and tablet editions of the magazine resulted in different relative environmental impacts. In addition, emerging (low number of readers and low reading time per copy) and mature (higher number of readers and higher reading time per copy) tablet editions yielded varying results. The emerging tablet edition resulted in higher potential environmental impacts per reader than the print edition, but the mature tablet edition yielded lower impacts per reader in half the impact categories assessed. This illustrates the importance of spreading the environmental impacts over a large number of readers. The electricity mix used in product system processes did not greatly affect the results of tablet/print comparisons, but overall number of readers for the tablet edition, number of readers per copy for the print edition, file size, and degree of use of the tablet device proved crucial for the comparison results.     

The Energetic Metabolism of Societies: Part II: Empirical Examples

Part I of this set of articles proposed methods to account for the energetic metabolism of societies. In this second part, the methods explicated in Part I are used to analyze the energy flows of societies with different "modes of subsistence": hunter-gatherers, a contemporary agricultural society in southeastern Asia, and a contemporary industrial society (Austria). The empirical examples are used to demonstrate differences in the "characteristic metabolism" of different modes of sub-sistence. The energy system of hunter-gatherers can be described as an "uncontrolled solar energy system," based mainly upon harvesting biomass without attending to its reproduction. Hunter-gatherers use only about 0.001% to 0.01% of the net primary production (NPP) of the territory they inhabit. Agricultural societies harness NPP to a much higher extent: Although agriculture often reduces NPP, the amount of biomass that agricultural societies use is much higher (about 20% of potential NPP). Because ecological energy flows are the main source of energy for agricultural societies, NPP strictly limits the energetic metabolism of agricultural societies. Industrial society uses area-independent energy sources (fossil and nuclear energy), which, however, result in new sustainability problems, such as greenhouse gas emissions. By providing methods to account for changes in energy flows, the metabolism approach proves itself to be a useful concept for analyzing society-environment interactions. The article demonstrates the difference between the metabolism approach and conventional energy statistics and discusses the significance of the proposed approach for sustainable development.     

The Life Cycle of Chlorine, Part III

In the two previous articles in this series we reviewed the major processes of chlorine production (Part I) and its intermediate uses and waste products in the production of other chemicals (Part 11). In this article I consider some of the final applications of chlorine (e.g., for water treatment and pulp bleaching) and the uses of the most important chlorinated compounds such as solvents, chlorofluorocarbons, and the plastic polyvinyl chloride in the industrial economy. I summarize known evidence regarding their environmental fates. The special case of persistent long-lived toxic compounds (e.g., pesticides) will be discussed in a subsequent article.