Function of a Low Molecular Weight Peptide from <Emphasis Type="Italic">Trichoderma pseudokoningii</Emphasis> S38 During Cellulose Biodegradation

The biochemical mechanism for cellulose decomposition by a low molecular weight peptide, named short fiber generating factor (SFGF), derived from the culture supernatant of a cellulolytic fungus Trichoderma pseudokoningii S-38, was determined. Sufficient information obtained by biochemical and biophysical studies and combined with observation with a scanning electron microscope provided further evidence for the earlier studies that the SFGF had a high capacity for chelating and reducing ferric ions, and could produce free radical by reduction of Fe³⁺ to Fe²⁺ in the presence of oxygen molecule. These studies suggested that the effect of SFGF on cellulose is directly related to an oxidative reaction and is different from the hydrolysis of cellulose by cellulases. The alcoholic hydroxyl groups in cellulose can be oxidized by SFGF, which leads to destruction of the hydrogen bond network in cellulose and cleavage of glycosidic linkages. Both effects led to the de-polymerization of cellulose and the formation of short fibers, and increase of reducing groups in residual cellulose, then the cellulose substrates became more susceptible for hydrolysis by cellulases. Received: 8 May 2002 / Accepted: 22 July 2002     

Function and mechanism of a low-molecular-weight peptide produced by Gloeophyllum trabeum in biodegradation of cellulose

A special low-molecular-weight peptide named Gt factor, was isolated and purified via HPLC from the culture extract of the brown-rot fungus Gloeophyllum trabeum. It had high-affinity Fe(3+)-chelating ability and could reduce Fe(3+) to Fe(2+). In the presence of O(2), it could produce hydroxyl radicals HO*. The effects of Gt factor on cellulose degradation suggested that Gt factor could disrupt inter- and intra- hydrogen bonds in cellulose chains by a HO*-involved mechanism. This resulted in depolymerization of cellulose chains, which produced more reducing and non-reducing ends, thus making cellulose accessible for further degradation. This pathway was quite different from the hydrolytic processes driven by cellulases, and Gt factor might play an important role in the early stage of cellulose depolymerization by brown-rot fungi.     

Trichoderma reesei cellulases

Recent advances in the delineation of the biochemical mechanisms of cellulose hydrolysis, strain improvement, molecular cloning and process engineering are bringing T. reesei cellulases closer to being a commercially viable route to cellulose hydrolysis.     

The processive endoglucanase EngZ is active in crystalline cellulose degradation as a cellulosomal subunit of Clostridium cellulovorans

Clostridium cellulovorans produces an efficient enzyme complex for the degradation of lignocellulosic biomass. In our previous study, we detected and identified protein spots that interacted with a fluorescently labeled cohesin biomarker via two-dimensional gel electrophoresis. One novel, putative cellulosomal protein (referred to as endoglucanase Z) contains a catalytic module from the glycosyl hydrolase family (GH9) and demonstrated higher levels of expression than other cellulosomal cellulases in Avicel-containing cultures. Purified EngZ had optimal activity at pH 7.0, 40°C, and the major hydrolysis product from the cellooligosaccharides was cellobiose. EngZ's specific activity toward crystalline cellulose (Avicel and acid-swollen cellulose) was 10-20-fold higher than other cellulosomal cellulase activities. A large percentage of the reducing ends that were produced by this enzyme from acid-swollen cellulose were released as soluble sugar. EngZ has the capability of reducing the viscosity of Avicel at an intermediate-level between exo- and endo-typing cellulases, suggesting that it is a processive endoglucanase. In conclusion, EngZ was highly expressed in cellulolytic systems and demonstrated processive endoglucanase activity, suggesting that it plays a major role in the hydrolysis of crystalline cellulose and acts as a cellulosomal enzyme in C. cellulovorans.     

Treatment of cotton with an alkaline Bacillus spp cellulase: activity towards crystalline cellulose

We analysed the influence of several enzymatic treatment processes using an alkaline cellulase enzyme from Bacillus spp. on the sorption properties of cotton fabrics. Although cellulases are commonly applied in detergent formulations due to their anti-redeposition and depilling benefits, determining the mechanism of action of alkaline cellulases on cotton fibres requires a deeper understanding of the morphology and structure of cotton fibres in terms of fibre cleaning. The accessibility of cellulose fibres was studied by evaluating the iodine sorption value and by fluorescent-labelled enzyme microscopy; the surface morphology of fabrics was analysed by scanning microscopy. The action of enzyme hydrolysis over short time periods can produce fibrillation on cotton fibre surface without any release of cellulosic material. The results indicate that several short consecutive treatments were more effective in increasing the fibre accessibility than one long treatment. In addition, no detectable hydrolytic activity, in terms of reducing sugar production, was found.     

Enhancing the enzymatic hydrolysis of lignocellulosic biomass by increasing the carboxylic acid content of the associated lignin

To assess the effects that the physical and chemical properties of lignin might have on the enzymatic hydrolysis of pretreated lignocellulosic substrates, protease treated lignin (PTL) and cellulolytic enzyme lignin (CEL) fractions, isolated from steam and organosolv pretreated corn stover, poplar, and lodgepole pine, were prepared and characterized. The adsorption of cellulases to the isolated lignin preparations corresponded to a Langmuir adsorption isotherm. It was apparent that, rather than the physical properties of the isolated lignin, the carboxylic acid functionality of the isolated lignin, as determined by FTIR and NMR spectroscopy, had much more of an influence when lignin was added to typical hydrolysis of pure cellulose (Avicel). An increase in the carboxylic content of the lignin preparation resulted in an increased hydrolysis yield. These results suggested that the carboxylic acids within the lignin partially alleviate non-productive binding of cellulases to lignin. To try to confirm this possible mechanism, dehydrogenative polymers (DHP) of monolignols were synthesized from coniferyl alcohol (CA) and ferulic acid (FA), and these model compounds were added to a typical enzymatic hydrolysis of Avicel. The DHP from FA, which was enriched in carboxylic acid groups compared with the DHP from CA, adsorbed a lower mount of cellulases and did not decrease hydrolysis yields when compared to the DHP from CA, which decreased the hydrolysis of Avicel by 8.4%. Thus, increasing the carboxylic acid content of the lignin seemed to significantly decrease the non-productive binding of cellulases and consequently increased the enzymatic hydrolysis of the cellulose.     

Short-fibre formation during cellulose degradation by cellulolytic fungi

Summary All cell-free filtrates of 26 fungal strains containning cellulase activities degraded native cellulose to both reducing sugar and insoluble short fibres. Low-molecular components from the crude filtrates could also degrade native cellulose into short fibres, not accompanied with the production of reducing sugar. Short fibre formation played an important role in cellulose degradation to make the substrate more accessible to attack of cellulases.     

Nutzung cellulosehaltiger Abprodukte bei der Biosynthese von Cellulasen

It was analysed the influence of different pretreatment methods of cellulosic materials to increase the productivity of the cellulase biosynthesis. The most effective pretreatment method for cotton cellulose is the thermomechanical destruction in a worm extruder (5–15 minutes) with hydrolysis catalysts. The enzymatic saccharification degree was increased about 4 fold. Utilizing a pretreated cellulose an increase of 70–120% in C₁-activity was found besides their level was stabilized in higher values. It was demonstrated that enzymatic hydrolysis parameters would be applied as model for biochemical utilization of cellulosic materials in the biosynthesis of cellulases.     

The O-glycosylated linker from the Trichoderma reesei Family 7 cellulase is a flexible, disordered protein

Fungi and bacteria secrete glycoprotein cocktails to deconstruct cellulose. Cellulose-degrading enzymes (cellulases) are often modular, with catalytic domains for cellulose hydrolysis and carbohydrate-binding modules connected by linkers rich in serine and threonine with O-glycosylation. Few studies have probed the role that the linker and O-glycans play in catalysis. Since different expression and growth conditions produce different glycosylation patterns that affect enzyme activity, the structure-function relationships that glycosylation imparts to linkers are relevant for understanding cellulase mechanisms. Here, the linker of the Trichoderma reesei Family 7 cellobiohydrolase (Cel7A) is examined by simulation. Our results suggest that the Cel7A linker is an intrinsically disordered protein with and without glycosylation. Contrary to the predominant view, the O-glycosylation does not change the stiffness of the linker, as measured by the relative fluctuations in the end-to-end distance; rather, it provides a 16 Å extension, thus expanding the operating range of Cel7A. We explain observations from previous biochemical experiments in the light of results obtained here, and compare the Cel7A linker with linkers from other cellulases with sequence-based tools to predict disorder. This preliminary screen indicates that linkers from Family 7 enzymes from other genera and other cellulases within T. reesei may not be as disordered, warranting further study.     

Comparison of the synergistic action of two thermostable xylanases from GH families 10 and 11 with thermostable cellulases in lignocellulose hydrolysis

Recombinant xylanase preparations from Nonomuraea flexuosa (Nf Xyn, GH11) and Thermoascus aurantiacus (Ta Xyn, GH10) were evaluated for their abilities to hydrolyze hydrothermally pretreated wheat straw. The GH family 10 enzyme Ta Xyn was clearly more efficient in solubilizing xylan from pretreated wheat straw. Improvement of the hydrolysis of hydrothermally pretreated wheat straw by addition of the thermostable xylanase preparations to thermostable cellulases was evaluated. Clear synergistic enhancement of hydrolysis of cellulose was observed when cellulases were supplemented even with a low amount of pure xylanases. Xylobiose was the main hydrolysis product from xylan. It was found that the hydrolysis of cellulose increased nearly linearly with xylan removal during the enzymatic hydrolysis. The results also showed that the xylanase preparation from T. aurantiacus, belonging to GH family 10 always showed better hydrolytic capacity of solubilizing xylan and acting synergistically with thermostable cellulases in the hydrolysis of hydrothermally pretreated wheat straw.     

Kinetics of the enzymatic hydrolysis of cellulose: 2. A mathematical model for the process in a plug-flow column reactor

The kinetics of enzymatic cellulose hydrolysis in a plug-flow column reactor catalysed by cellulases [see 1,4-(1,3;1,4)-β-d-glucan 4-glucanohydrolase, EC 3.2.1.4] from Trichoderma longibrachiatum adsorbed on cellulose surface have been studied. The maximum substrate conversion achieved was 90–94%. The possibility of enzyme recovery for a reactor of this type is discussed. A mathematical model for enzymatic cellulose hydrolysis in a plug-flow column reactor has been developed. The model allows for the component composition of the cellulase complex, adsorption of cellulases on the substrate surface, inhibition by reaction products, changes in cellulose reactivity and the inactivation of enzymes in the course of hydrolysis. The model affords a reliable prediction of the kinetics of d-glucose and cellobiose formation from cellulose in a column reactor as well as the degree of substrate conversion and reactor productivity with various amounts of adsorbed enzymes and at various flow rates.     

Elucidation of adsorption processes of cellulases during hydrolysis of crystalline cellulose

Summary To elucidate the effect of adsorption of cellulases during hydrolysis of crystalline cellulose, the relationship between the rate of hydrolysis and the adsorption of crude cellulases onto crystalline cellulose was investigated under various experimental conditions. Several phases of adsorption have been proposed to explain the process of cellulose hydrolysis by these enzymes. The process of hydrolysis calculated on the basis of these phases fitted well with that obtained experimentally.     

Cel9D, an atypical 1,4-beta-D-glucan glucohydrolase from Fibrobacter succinogenes: characteristics, catalytic residues, and synergistic interactions with other cellulases

The increasing demands of renewable energy have led to the critical emphasis on novel enzymes to enhance cellulose biodegradation for biomass conversion. To identify new cellulases in the ruminal bacterium Fibrobacter succinogenes, a cell extract of cellulose-grown cells was separated by ion-exchange chromatography and cellulases were located by zymogram analysis and identified by peptide mass fingerprinting. An atypical family 9 glycoside hydrolase (GH9), Cel9D, with less than 20% identity to typical GH9 cellulases, was identified. Purified recombinant Cel9D enhanced the production of reducing sugar from acid swollen cellulose (ASC) and Avicel by 1.5- to 4-fold when mixed separately with each of four other glucanases, although it had low activity on these substrates. Cel9D degraded ASC and cellodextrins with a degree of polymerization higher than 2 to glucose with no apparent endoglucanase activity, and its activity was restricted to beta-1-->4-linked glucose residues. It catalyzed the hydrolysis of cellulose by an inverting mode of reaction, releasing glucose from the nonreducing end. Unlike many GH9 cellulases, calcium ions were not required for its function. Cel9D had increased kcat/Km values for cello-oligosaccharides with higher degrees of polymerization. The kcat/Km value for cellohexaose was 2,300 times higher than that on cellobiose. This result indicates that Cel9D is a 1,4-beta-D-glucan glucohydrolase (EC 3.2.1.74) in the GH9 family. Site-directed mutagenesis of Cel9D identified Asp166 and Glu612 as the candidate catalytic residues, while Ser168, which is not present in typical GH9 cellulases, has a crucial structural role. This enzyme has an important role in crystalline cellulose digestion by releasing glucose from accessible cello-oligosaccharides.     

The influence of pretreatment and enzyme loading on the effectiveness of batch and fed-batch hydrolysis of corn stover

To try to improve hydrolysis yields at elevated solids loadings, a comparison was made between batch and fed-batch addition of fresh substrate at the initial and later phases of hydrolysis. Both ethanol (EPCS) and steam-pretreated corn stover (SPCS) substrates were tested at low (5 FPU) and high (60 FPU) loadings of cellulase per gram of cellulose. The fed-batch addition of fresh substrate resulted in a slight decrease in hydrolysis yields when compared with the corresponding batch reactions. A 72-h hydrolysis of the SPCS substrate resulted in a hydrolysis yield of 66% compared with 51% for the EPCS substrate. When the enzyme adsorption and substrate characteristics were assessed during batch and fed-batch hydrolysis, it appeared that the irreversible binding of cellulases to the more recalcitrant original substrate limited their access to the freshly added substrate. After 72-h hydrolysis of the SPCS substrate at low enzyme loadings, ～40-50% of the added cellulases were desorbed into solution, whereas only 20% of the added enzyme was released from the EPCS substrate. Both simultaneous and sequential treatments with xylanases and cellulases resulted in an up to a 20% increase in hydrolysis yields for both substrates at low enzyme loading. Simons' stain measurements indicated that xylanase treatment increased cellulose access, thus facilitating cellulose hydrolysis.     

Modeling the activity burst in the initial phase of cellulose hydrolysis by the processive cellobiohydrolase Cel7A

The hydrolysis of cellulose by processive cellulases, such as exocellulase TrCel7A from Trichoderma reesei, is typically characterized by an initial burst of high activity followed by a slowdown, often leading to incomplete hydrolysis of the substrate. The origins of these limitations to cellulose hydrolysis are not yet fully understood. Here, we propose a new model for the initial phase of cellulose hydrolysis by processive cellulases, incorporating a bound but inactive enzyme state. The model, based on ordinary differential equations, accurately reproduces the activity burst and the subsequent slowdown of the cellulose hydrolysis and describes the experimental data equally well or better than the previously suggested model. We also derive steady-state expressions that can be used to describe the pseudo-steady state reached after the initial activity burst. Importantly, we show that the new model predicts the existence of an optimal enzyme-substrate affinity at which the pseudo-steady state hydrolysis rate is maximized. The model further allows the calculation of glucose production rate from the first cut in the processive run and reproduces the second activity burst commonly observed upon new enzyme addition. These results are expected to be applicable also to other processive enzymes.     

Detrimental effect of cellulose oxidation on cellulose hydrolysis by cellulase

To effectively convert complex and recalcitrant biomass carbohydrates to simple platform sugars useful for fuel and chemicals production, mechanical or chemical pre-treatments are often required to make the carbohydrates more accessible for enzymatic hydrolysis. Due to their harsh conditions, some pre-treatments might negatively affect enzymatic hydrolysis because of events such as cellulose oxidation. To study how oxidative modification may impact cellulose's reactivity toward hydrolysis by cellulases, we prepared three cellulose substrates by cupric ion and hypochlorite oxidations, and subjected the derived celluloses to hydrolysis by various cellobiohydrolases from glycoside hydrolase families 6 and 7, and one cellulolytic Hypocrea jecorina extracellular enzyme mixture. We observed a profound decrease of enzymatic hydrolysis on the oxidized celluloses. The effect was attributed to the interference, from oxidized functional groups in cellulose, on its binding/activation in the active pocket/tunnel of cellobiohydrolases. Potential implication of the observed effect from cellulose oxidation on pre-treatment optimization and cellulase improvement was discussed.     

Purification and characterization of Thermobifida fusca xylanase 10B

Thermobifida fusca grows well on cellulose and xylan, and produces a number of cellulases and xylanases. The gene encoding a previously unstudied endoxylanase, xyl10B, was overexpressed in E. coli, and the protein was purified and characterized. Mature Xyl10B is a 43-kDa glycohydrolase with a short basic domain at the C-terminus. It has moderate thermostability, maintaining 50% of its activity after incubation for 16 h at 62 degrees C, and is most active between pH 5 and 8. Xyl10B is produced by growth of T. fusca on xylan or Solka Floc but not on pure cellulose. Mass spectroscopic analysis showed that Xyl10B produces xylobiose as the major product from birchwood and oat spelts xylan and that its hydrolysis products differ from those of T. fusca Xyl11A. Xyl10B hydrolyzes various p-nitrophenyl-sugars, including p-nitrophenyl alpha-D-arabinofuranoside, p-nitrophenyl-beta-D-xylobioside, p-nitrophenyl-beta-D-xyloside, and p-nitrophenyl-beta-D-cellobioside. Xyl11A has higher activity on xylan substrates, but Xyl10B produced more reducing sugars from corn fiber than did Xyl11A.     

Enzymatic hydrolysis of microcrystalline cellulose in reverse micelles

The activities of cellulases from Trichoderma reesei entrapped in three types of reverse micelles have been investigated using microcrystalline cellulose as the substrate. The reverse micellar systems are formed by nonionic surfactant Triton X-100, anionic surfactant Aerosol OT (AOT), and cationic surfactant cetyltrimethyl ammonium bromide (CTAB) in organic solvent media, respectively. The influences of the molar ratio of water to surfactant omega0, one of characteristic parameters of reverse micelles, and other environmental conditions including pH and temperature, on the enzymatic activity have been studied in these reverse micellar systems. The results obtained indicate that these three reverse micelles are more effective than aqueous systems for microcrystalline cellulose hydrolysis, and cellulases show "superactivity" in these reverse micelles compared with that in aqueous systems under the same pH and temperature conditions. The enzymatic activity decreases with the increase of omega0 in both AOT and Triton X-100 reverse micellar systems, but reaches a maximum at omega0 of 16.7 for CTAB reverse micelles. Temperature and pH also influence the cellulose hydrolysis process. The structural changes of cellulases in AOT reverse micelles have been measured by intrinsic fluorescence method and a possible explanation for the activity changes of cellulases has been proposed.     

Simultaneous improvement of saccharification and ethanol production from crystalline cellulose by alleviation of irreversible adsorption of cellulase with a cell surface-engineered yeast strain

Enzymatic hydrolysis of cellulosic material is an essential step in the bioethanol production process. However, complete cellulose hydrolysis by cellulase is difficult due to the irreversible adsorption of cellulase onto cellulose. Thus, part of the cellulose remains in crystalline form after hydrolysis. In this study, after 96-h hydrolysis of Avicel crystalline cellulose, 47.1 % of the cellulase was adsorbed on the cellulose surface with 10.8 % crystalline cellulose remaining. In simultaneous saccharification and fermentation of 100 g/L Avicel with 1.0 filter paper unit/mL cellulase, a wild-type yeast strain produced 44.7 g/L ethanol after 96 h. The yield of ethanol was 79.7 % of the theoretical yield. On the other hand, a recombinant yeast strain displaying various cellulases, such as β-glucosidase, cellobiohydrolase, and endoglucanase, produced 48.9 g/L ethanol, which corresponds to 87.3 % of the theoretical yield. Higher ethanol production appears to be attributable to higher efficiency of cellulase displayed on the cell surface. These results suggest that cellulases displayed on the yeast cell surface improve hydrolysis of Avicel crystalline cellulose. Indeed, after the 96-h simultaneous saccharification and fermentation using the cellulase-displaying yeast, the amount of residual cellulose was 1.5 g/L, one quarter of the cellulose remaining using the wild-type strain, a result of the alleviation of irreversible adsorption of cellulases on the crystalline cellulose.