Polynuclear Aromatic Hydrocarbons (PAHs) in fish from the Red Sea Coast of Yemen

A detailed analytical study using combined normal phase high pressure liquid chromatography (HPLC), gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS) of Polynuclear Aromatic Hydrocarbons (PAHs) in fish from the Red Sea was undertaken. This investigation involves a preliminary assessment of the sixteen parent compounds issued by the U.S. Environmental Protection Agency(EPA). The study revealed measurable levels of Σ PAHs (the sum of three to five or six ring parent compounds) (49.2 ng g⁻¹ dry weight) and total PAHs (all PAH detected) (422.1 ng g⁻¹ dry weight) in edible muscle of fishes collected from the Red Sea. These concentrations are within the range of values reported for other comparable regions of the world. Mean concentrations for individual parent PAH in fish muscles were; naphthalene 19.5, biphenyl 4.6, acenaphthylene 1.0, acenaphthene 1.2, fluorene 5.5, phenanthrene 14.0, anthracene 0.8, fluoranthene 1.5, pyrene 1.8, benz(a)anthracene 0.4, chrysene 1.9, benzo(b)fluoranthene 0.5, benzo(k)fluoranthene 0.5, benzo(e)pyrene 0.9, benzo(a)pyrene 0.5, perylene 0.2, and indeno(1,2,3-cd)pyrene 0.1 ng g⁻¹ dry weight respectively. The Red Sea fish extracts exhibit the low molecular weight aromatics as well as the discernible alkyl-substituted species of naphthalene, fluorene, phenanthrene and dibenzothiophene. Thus, it was suggested that the most probable source of PAHs is oil contamination originating from spillages and/or heavy ship traffic. It was concluded that the presence of PAHs in the fish muscles is not responsible for the reported fish kill phenomenon. However, the high concentrations of carcinogenic chrysene encountered in these fishes should be considered seriously as it is hazardous to human health. Based on fish consumption by Yemeni‘s population it was calculated that the daily intake of total carcinogens were 0.15 μg/person/day. This revised version was published online in August 2006 with corrections to the Cover Date.     

Distribution patterns of selected PAHs in bulk peat and corresponding humic acids from a Swiss ombrotrophic bog profile

An ombrotrophic peat core was collected in 2005 from Etang de la Gruère, Jura Mountains, Switzerland. The concentrations of nine among the U.S. Environmental Protection Agency priority polycyclic aromatic hydrocarbons (PAHs) (i.e., acenaphthene, phenanthrene, fluorene, pyrene, fluoranthene, benzo[jbk]fluoranthene, benzo[a]pyrene, benzo[ghi]perylene, and indeno[1,2,3-cd]pyrene) were determined in both bulk peat and corresponding humic acids (HA) samples by gas chromatography equipped with a mass spectrometry detector (GC-MS). The maximum PAHs concentrations in peat (around 1,250 μg Σ PAHs kg^?1 dry matter) were found at 28–30 cm of depth, which correspond to ca. 1920–1930, when coal inputs to Switzerland reached their maximum level. Amongst the nine PAHs analyzed in the peat samples, pyrene (Pyr) was the predominant species, accounting for ca. 20–100% of the total PAHs throughout the profile. In the HA fraction, that represents 24.7% (average value) of the bulk peat, only phenanthrene (Phe), and sporadically Pyr and fluoranthene (Fth), were detected. In particular, HA showed Phe concentrations that were ten–150 times higher than corresponding bulk peat samples, thus suggesting its preservation against biodegradation due to the incorporation into HA molecules.     

Conversion of polycyclic aromatic hydrocarbons by <Emphasis Type="Italic">Sphingomonas</Emphasis> sp. VKM B-2434

A versatile bacterial strain able to convert polycyclic aromatic hydrocarbons (PAHs) was isolated, and a conversion by the isolate of both individual substances and PAH mixtures was investigated. The strain belonged to the Sphingomonas genus as determined on the basis of 16S rRNA analysis and was designated as VKM B-2434. The strain used naphthalene, acenaphthene, phenanthrene, anthracene and fluoranthene as a sole source of carbon and energy, and cometabolically oxidized fluorene, pyrene, benz[a]anthracene, chrysene and benzo[a]pyrene. Acenaphthene and fluoranthene were degraded by the strain via naphthalene-1,8-dicarboxylic acid and 3-hydroxyphthalic acid. Conversion of most other PAHs was confined to the cleavage of only one aromatic ring. The major oxidation products of naphthalene, phenanthrene, anthracene, chrysene, and benzo[a]pyrene were identified as salicylic acid, 1-hydroxy-2-naphthoic acid, 3-hydroxy-2-naphthoic acid, o-hydroxyphenanthroic acid and o-hydroxypyrenoic acid, respectively. Fluorene and pyrene were oxidized mainly to hydroxyfluorenone and dihydroxydihydropyrene, respectively. Oxidation of phenanthrene and anthracene to the corresponding hydroxynaphthoic acids occurred quantitatively. The strain converted phenanthrene, anthracene, fluoranthene and carbazole of coal-tar-pitch extract.     

Removal and transformation of high molecular weight polycyclic aromatic hydrocarbons in water by live and dead microalgae

The removal and transformation of seven high molecular weight polycyclic aromatic hydrocarbons (PAHs), namely benz[a]anthracene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, indeno[1,2,3-c,d]pyrene and benzo[g,h,i]perylene, by a freshwater microalga Selenastrum capricornutum under gold and white light irradiation was studied. The two light sources did not result in significant differences in the biodegradation of the selected PAHs in live algal cells, but white light was more effective in promoting photodegradation than was gold light in dead cells. The removal efficiency of seven PAHs, as well as the difference between live and dead microalgal cells, was PAH compound-dependent. Benz[a]anthracene and benzo[a]pyrene were highly transformed in live and dead algal cells, and dead cells displayed greater transformation levels than live cells. Further investigation comparing the transformation of single PAH compound, benzo[a]pyrene, by S. capricornutum and another green microalgal species, Chlorella sp., demonstrated that the transformation in dead cells was similar, indicating the process was algal-species independent. Dead algal cells most likely acted as a photosensitizer and accelerated the photodegradation of PAHs.     

Pleiotropic and Epistatic Behavior of a Ring-Hydroxylating Oxygenase System in the Polycyclic Aromatic Hydrocarbon Metabolic Network from Mycobacterium vanbaalenii PYR-1

Despite the considerable knowledge of bacterial high-molecular-weight (HMW) polycyclic aromatic hydrocarbon (PAH) metabolism, the key enzyme(s) and its pleiotropic and epistatic behavior(s) responsible for low-molecular-weight (LMW) PAHs in HMW PAH-metabolic networks remain poorly understood. In this study, a phenotype-based strategy, coupled with a spray plate method, selected a Mycobacterium vanbaalenii PYR-1 mutant (6G11) that degrades HMW PAHs but not LMW PAHs. Sequence analysis determined that the mutant was defective in pdoA2, encoding an aromatic ring-hydroxylating oxygenase (RHO). A series of metabolic comparisons using high-performance liquid chromatography (HPLC) analysis revealed that the mutant had a lower rate of degradation of fluorene, anthracene, and pyrene. Unlike the wild type, the mutant did not produce a color change in culture media containing fluorene, phenanthrene, and fluoranthene. An Escherichia coli expression experiment confirmed the ability of the Pdo system to oxidize biphenyl, the LMW PAHs naphthalene, phenanthrene, anthracene, and fluorene, and the HMW PAHs pyrene, fluoranthene, and benzo[a]pyrene, with the highest enzymatic activity directed toward three-ring PAHs. Structure analysis and PAH substrate docking simulations of the Pdo substrate-binding pocket rationalized the experimentally observed metabolic versatility on a molecular scale. Using information obtained in this study and from previous work, we constructed an RHO-centric functional map, allowing pleiotropic and epistatic enzymatic explanation of PAH metabolism. Taking the findings together, the Pdo system is an RHO system with the pleiotropic responsibility of LMW PAH-centric hydroxylation, and its epistatic functional contribution is also crucial for the metabolic quality and quantity of the PAH-MN.     

Biodegradation of polycyclic aromatic hydrocarbons by an acidophilic Stenotrophomonas maltophilia strain AJH1 isolated from a mineral mining site in Saudi Arabia

The present study aims at analyzing the degradation of polycyclic aromatic hydrocarbons (PAHs) at acidic conditions (pH = 2) by acidophilic Stenotrophomonas maltophilia strain AJH1 (KU664513). The strain AJH1 was obtained from an enrichment culture obtained from soil samples of mining area in the presence of PAH as sole sources of carbon and energy. Strain AJH1was able to degrade low (anthracene, phenanthrene, naphthalene, fluorene) and high (pyrene, benzo(e)pyrene and benzo(k)fluoranthene) molecular weight PAHs in acidophilic mineral salt medium at pH 2, with removal rates of up to 95% (LMW PAH) and 80% (HMW PAH), respectively. In addition, strain AJH1 treated petroleum wastewater with 89 ± 1.1% COD removal under acidic condition (pH 2) in a continuously stirred reactor. Acidophilic S. maltophilia strain AJH1, hence holds the promise as an effective degrader for biological treatment of PAHs contaminated wastewater at acidic pH.

     

Predicting the Efficacy of Polycyclic Aromatic Hydrocarbon Bioremediation in Creosote-Contaminated Soil Using Bioavailability Assays

Nonexhaustive extraction (propanol, butanol, hydroxypropyl-β-cyclodextrin [HPCD]), persulfate oxidation and biodegradability assays were employed to determine the bioavailability of polycyclic aromatic hydrocarbons (PAHs) in creosote-contaminated soil. After 16 weeks incubation, greater than 89% of three-ring compounds (acenaphthene, anthracene, fluorene, and phenanthrene) and 21% to 79% of four-ring compounds (benz[a]anthracene, chrysene, fluoranthene, and pyrene) were degraded by the indigenous microorganisms under biopile conditions. No significant decrease in five- (benzo[a]pyrene, benzo[b+k]fluoranthene) and six-ring compounds (benz[g,h,i]perylene, indeno[1,2,3-c,d]pyrene) was observed. Desorption of PAHs using propanol or butanol could not predict PAH biodegradability: low-molecular-weight PAH biodegradability was underestimated whereas high-molecular-weight PAH biodegradability was overestimated. Persulfate oxidation and HPCD extraction of creosote-contaminated soil was able to predict three- and four-ring PAH biodegradability; however, the biodegradability of five-ring PAHs was overestimated. These results demonstrate that persulfate oxidation and HPCD extraction are good predictors of PAH biodegradability for compounds with octanol-water partitioning coefficients of < 6.     

Enhancing the intrinsic bioremediation of PAH-contaminated anoxic estuarine sediments with biostimulating agents

Estuarine sediments are frequently polluted with hydrocarbons from fuel spills and industrial wastes. Polycyclic aromatic hydrocarbons (PAHs) are components of these contaminants that tend to accumulate in the sediment due to their low aqueous solubility, low volatility, and high affinity for particulate matter. The toxic, recalcitrant, mutagenic, and carcinogenic nature of these compounds may require aggressive treatment to remediate polluted sites effectively. In petroleum-contaminated sediments near a petrochemical industry in Gwangyang Bay, Korea, in situ PAH concentrations ranged from 10 to 2,900 microg/kg dry sediment. To enhance the biodegradation rate of PAHs under anaerobic conditions, sediment samples were amended with biostimulating agents alone or in combination: nitrogen and phosphorus in the form of slow-release fertilizer (SRF), lactate, yeast extract (YE), and Tween 80. When added to the sediment individually, all tested agents enhanced the degradation of PAHs, including naphthalene, acenaphthene, anthracene, fluorene, phenanthrene, fluoranthene, pyrene, chrysene, and benzo[a]pyrene. Moreover, the combination of SRF, Tween 80, and lactate increased the PAH degradation rate 1.2-8.2 times above that of untreated sediment (0.01-10 microg PAH/kg dry sediment/day). Our results indicated that in situ contaminant PAHs in anoxic sediment, including high molecular weight PAHs, were degraded biologically and that the addition of stimulators increased the biodegradation potential of the intrinsic microbial populations. Our results will contribute to the development of new strategies for in situ treatment of PAH-contaminated anoxic sediments.     

Degradation of polycyclic aromatic hydrocarbons and long chain alkanes at 6070 °C by Thermus and Bacillus spp

Although polycyclic aromatic hydrocarbons (PAH) and alkanesare biodegradable at ambient temperature, in some cases low bioavailabilities are thereason for slow biodegradation. Considerably higher mass transfer rates and PAH solubilities and hence bioavailabilities can be obtained at higher temperatures. Mixed and pure cultures of aerobic, extreme thermophilic microorganisms (Bacillus spp., Thermus sp.) were used to degrade PAH compounds and PAH/alkane mixtures at 65 °C. The microorganismsused grew on hydrocarbons as sole carbon and energy source. Optimal growthtemperatures were in the range of 60–70 °C at pH values of 6–7. The conversion of PAH with 3–5 rings (acenaphthene, fluoranthene, pyrene, benzo[e]pyrene) was demonstrated. Efficient PAH biodegradation required a second, degradable liquid phase. Thermus brockii Hamburg metabolized up to 40 mg (l h)^-1 pyrene and 1000 mg(1 h)^-1 hexadecane at 70 °C. Specific growth rates of 0.43 h^-1 were measured for this strain with hexadecane/pyrene mixtures as the sole carbon and energy source in a 2-liter stirred bioreactor. About 0.7 g cell dry weight were formed from 1 g hydrocarbon. The experiments demonstrate the feasibility and efficiency of extreme thermophilic PAH and alkane biodegradation.     

Biodegradation studies of polyaromatic hydrocarbons in aqueous media

Sixteen bacterial strains isolated from an activated sludge and Mycobacterium ssp. PYR-1 were tested for their ability to degrade polyaromatic hydrocarbons (PAHs). The bacterial strains Pasteurella ssp. (B-2) and Mycobacterium ssp. PYR-1 (AM) showed a high biodegradation potential of three- and four-ring PAHs. Bacterial strain AM was able to degrade up to 80% of three and four-ring PAHs (phenanthrene, fluoranthene and pyrene) within the first month of incubation, while the bacterial strain B-2 achieved the same biodegradation in 2 months. The metabolic pathway of PAH degradation was studied using fluoranthene and the bacterial strain AM. Ninety per cent of fluoranthene was biodegraded within the first 9 d of incubation when applied as a single substrate. Retention factor values from thin-layer chromatography studies, gas chromatography with mass selective detection and tandem mass spectrometry identified 9-fluorenone-1-carboxylic acid as one of the stable metabolic products and from this a fluoranthene biodegradation pathway is proposed.     

Degradation of straight-chain aliphatic and high-molecular-weight polycyclic aromatic hydrocarbons by a strain of Mycobacterium austroafricanum

AIMS: Our goal was to characterize a newly isolated strain of Mycobacterium austroafricanum, obtained from manufactured gas plant (MGP) site soil and designated GTI-23, with respect to its ability to degrade polycyclic aromatic hydrocarbons (PAHs). METHODS AND RESULTS: GTI-23 is capable of growth on phenanthrene, fluoranthene, or pyrene as a sole source of carbon and energy; it also extensively mineralizes the latter two in liquid culture and is capable of extensive degradation of fluorene and benzo[a]pyrene, although this does not lead in either of these cases to mineralization. Supplementation of benzo[a]pyrene-containing cultures with phenanthrene had no significant effect on benzo[a]pyrene degradation; however, this process was substantially inhibited by the addition of pyrene. Extensive and rapid mineralization of pyrene by GTI-23 was also observed in pyrene-amended soil. CONCLUSIONS: Strain GTI-23 shows considerable ability to mineralize a range of polycyclic aromatic hydrocarbons, both in liquid and soil environments. In this regard, GTI-23 differs markedly from the type strain of Myco. austroafricanum (ATCC 33464); the latter isolate displayed no (or very limited) mineralization of any tested PAH (phenanthrene, fluoranthene or pyrene). When grown in liquid culture, GTI-23 was also found to be capable of growing on and mineralizing two aliphatic hydrocarbons (dodecane and hexadecane). SIGNIFICANCE AND IMPACT OF THE STUDY: These findings indicate that this isolate of Myco. austroafricanum may be useful for bioremediation of soils contaminated with complex mixtures of aromatic and aliphatic hydrocarbons.     

Photomutagenicity of 16 polycyclic aromatic hydrocarbons from the US EPA priority pollutant list

The photomutagenicity of 16 polycyclic aromatic hydrocarbons (PAHs), all on the United States Environmental Protection Agency (US EPA) priority pollutant list, was studied. Concomitant exposing the Salmonella typhimurium bacteria strain TA102 to one of the PAHs and light (1.1 J/cm2 UVA+2.1 J/cm2 visible) without the activation enzyme S9, strong photomutagenic response is observed for anthracene, benz[a]anthracene, benzo[ghi]perylene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, and pyrene. Under the same conditions, acenaphthene, acenaphthylene, benzo[k]fluoranthene, chrysene, and fluorene are weakly photomutagenic. Benzo[b]fluoranthene, fluoranthene, naphthalene, phenanthrene, and dibenz[a,h]anthracene are not photomutagenic. These results indicate that PAHs can be activated by light and become mutagenic in Salmonella TA102 bacteria. At the same time, the mutagenicity for all the 16 PAHs was examined with the standard mutagenicity test with 10% S9 as the activation system. Benzo[b]fluoranthene, benzo[k]fluoranthene, chrysene, acenaphthylene, and fluorene are weakly mutagenic, while the rest of the PAHs are not. In general, the photomutagenicity of PAHs in TA102 does not correlate with their S9-activated mutagenicity in either TA102 or TA98/TA100 since they involve different activation mechanisms.     

Utilization of solubilized and crystalline mixtures of polycyclic aromatic hydrocarbons by a Mycobacterium sp.

A strain of Mycobacterium, that is able to degrade fluorene, phenanthrene, fluoranthene and pyrene was grown on various mixtures of these substrates. The polycyclic aromatic hydrocarbons (PAH) were provided either as crystals or solubilized by a surfactant. Mixed PAH were degraded simultaneously, but not in parallel, indicating that the degradation pathways were not incompatible. Certain interactions of the substrates were observed. For example, the degradation of solubilized pyrene was delayed in the presence of fluorene and enhanced in the presence of phenanthrene. Fluorene was degraded cometabolically with the other PAH serving as growth substrates, but not as the only source of carbon. The utilization of phenanthrene occurred at the fastest rate and was not affected by the presence of fluorene, pyrene or fluoranthene.     

Degradation of a mixture of high‐molecular‐weight polycyclic aromatic hydrocarbons by a Mycobacterium strain PYR‐1

Mycobacterium sp. PYR‐1, which was previously shown to mineralize several individual polycyclic aromatic hydrocarbons (PAHs), simultaneously degraded phenanthrene, anthracene, fluoranthene, pyrene and benzo[a]pyrene in a six‐component synthetic mixture. Chrysene was not degraded significantly. When provided with a complex carbon source, Mycobacterium sp. PYR‐1 degraded greater than 74% of the total PAH mixture during 6 d of incubation. Mycobacterium sp. PYR‐1 appeared to preferentially degrade phenanthrene. No significant difference in degradation rates was observed between fluoranthene and pyrene. Anthracene degradation was slightly delayed but, once initiated, proceeded at a constant rate. Benzo[a]pyrene was degraded slowly. Degradation of a crude mixture of benzene‐soluble PAHs from contaminated sediments resulted in a 47% reduction of the material in 6 d compared with that of autoclaved controls. Experiments using an environmental microcosm test system indicated that mineralization rates of individual ¹⁴C‐labeled compounds were significantly lower in the mixtures than in equivalent doses of these compounds alone. Mineralization of the complete mixture was estimated conservatively to be between 49.7 and 53.6% and was nearly 50% in 30 d of incubation when all compounds were radiolabeled. These results strengthen the argument for the potential application of Mycobacterium sp. PYR‐1 for bioremediation of PAH‐contaminated wastes.     

Enhanced Degradation of a Mixture of Polycyclic Aromatic Hydrocarbons by a Defined Microbial Consortium in a Two-Phase Partitioning Bioreactor

Biological treatment methods are effective at destroying polycyclic aromatic hydrocarbons (PAHs), and some of the highest rates of PAH degradation have been achieved using two-phase-partitioning bioreactors (TPPBs). TPPBs consist of a cell-containing aqueous phase and a biocompatible and immiscible organic phase that partitions toxic and/or recalcitrant substrates to the cells based on their metabolic demand and on maintaining the thermodynamic equilibrium of the system. In this study, the degradation of a 5-component mixture of high and low molecular weight PAHs by a defined microbial consortium of Sphingomonas aromaticivorans B0695 and Sphingomonas paucimobilis EPA505 in a TPPB was examined. The extremely low aqueous solubilities of the high molecular weight (HMW) PAHs significantly reduce their bioavailability to cells, not only in the environment, but in TPPBs as well. That is, in the two-phase system, the originally selected solvent, dodecane, was found to sequester the HMW PAHs from the cells in the aqueous phase due to the inherent high solubility of the hydrophobic compounds in this solvent. To circumvent this limitation, the initial PAH concentrations in dodecane were increased to sufficient levels in the aqueous phase to support degradation: LMW PAHs (naphthalene, phenanthrene) and fluoranthene were degraded completely in 8 h, while the HMW PAHs, pyrene and benzo[a]pyrene, were degraded by 64% and 11%, at rates of 42.9 mg l⁻¹ d⁻¹ and 7.5 mg l⁻¹ d⁻¹, respectively. Silicone oil has superior PAH partitioning abilities compared to dodecane for the HMW PAHs, and was used to improve the extent of degradation for the PAH mixture. Although silicone oil increased the bioavailability of the HMW PAHs and greater extents of biodegradation were observed, the rates of degradation were lower than that obtained in the TPPB employing dodecane.     

Bioremediation of Polyaromatic Hydrocarbon-Contaminated Sediments in Aerated Bioslurry Reactors

Treatment of dredged sediments contaminated by polyaromatic hydrocarbons (PAHs) is a significant problem in the New York/New Jersey (NY/NJ) Harbor. 0.5 m³-scale slurry-phase bioreactors were used to determine whether bioaugmentation with a PAH-degradative bacterial consortium, or with the salt marsh grass S. alterniflora, could enhance the biodegradation of PAHs added to dredged estuarine sediments from the NY/NJ Harbor. The results were compared to biodegradation effected by the indigenous sediment microbial community. Sediments were diluted 1:1 in tap water and spiked to a final concentration of 20 mg/kg dry weight sediment of phenanthrene, anthracene, acenaphthene, fluorene, fluoranthene, and pyrene. The sediment slurry was then continuously sparged with air over 3 months. In all bioreactors a rapid reduction of greater than 95% of the initial phenanthrene, acenaphthene, and fluorene occurred within 14 days. Pyrene and fluoranthene reductions of 70 to 90% were achieved by day 77 of treatment. Anthracene was more recalcitrant and reductions ranged from 30 to 85%. Separate experiments showed that the sediment microbial communities mineralized ¹⁴C-pyrene and ¹⁴C-phenanthrene. PAH degradation, and the number of phenanthrene-degrading bacteria, were not enhanced by microbial or plant bioaugmentation. These data demonstrate that bioaugmentation is not required to effect efficient remediation of PAH-contaminated dredged sediments in slurry-phase bioreactors.     

Bioremediation of a polyaromatic hydrocarbon contaminated soil by native soil microbiota and bioaugmentation with isolated microbial consortia

Biodegradation of a mixture of PAHs was assessed in forest soil microcosms performed either without or with bioaugmentation using individual fungi and bacterial and a fungal consortia. Respiratory activity, metabolic intermediates and extent of PAH degradation were determined. In all microcosms the low molecular weight PAH’s naphthalene, phenanthrene and anthracene, showed a rapid initial rate of removal. However, bioaugmentation did not significantly affect the biodegradation efficiency for these compounds. Significantly slower degradation rates were demonstrated for the high molecular weight PAH’s pyrene, benz[a]anthracene and benz[a]pyrene. Bioaugmentation did not improve the rate or extent of PAH degradation, except in the case of Aspergillus sp. Respiratory activity was determined by CO₂ evolution and correlated roughly with the rate and timing of PAH removal. This indicated that the PAHs were being used as an energy source. The native microbiota responded rapidly to the addition of the PAHs and demonstrated the ability to degrade all of the PAHs added to the soil, indicating their ability to remediate PAH-contaminated soils.     

Degradation of High Molecular Weight PAHs in Contaminated Soil by a Bacterial Consortium: Effects on Microtox and Mutagenicity Bioassays

Bioaugmentation of polycyclic aromatic hydrocarbon (PAH)-contaminated soil was investigated using a mixed bacterial culture (community five) isolated from an abandoned industrial site. Community five was inoculated into contaminated soil containing a total PAH (two- to five-ring compounds) concentration of approximately 820 mg/kg soil. PAH degradation by the indigenous microbial population was restricted to the lower molecular weight compounds (naphthalene, acenaphthene, fluorene and phenanthrene) even with yeast extract addition: these compounds decreased by 14 to 37%, in soil hydrated to 50% water capacity, following 91 days of incubation at 24°C. Inoculation of community five into this PAH-contaminated soil resulted in significant decreases in the concentration of all PAHs over the incubation period: greater than 86% of naphthalene, acenaphthene, fluorene, and phenanthrene were degraded after 91 days, while anthracene, fluoranthene, and pyrene were degraded to lesser extents (51.7 to 57.6%). A lag period of 48 to 63 days was observed before the onset of benz[a]anthracene, benzo[a]pyrene, and dibenz[a,h]anthracene removal. However, significant decreases in the concentration of these compounds (32.6, 25.2, and 18.5%, respectively) were observed after 91 days. No significant decrease in the mutagenic potential of organic soil extracts (as measured by the Ames Test) was observed after incubation of the soil with the indigenous microflora; however, the Microtox toxicity of aqueous soil extracts was reduced sevenfold. In contrast, extracts from contaminated soil inoculated with community five underwent a 43% decrease in mutagenic potential and the toxicity was reduced 170-fold after 91 days incubation. These observations suggest that community five could be utilised for the detoxification of PAH-contaminated soil.     

Physiological characterization of Mycobacterium sp. strain 1B isolated from a bacterial culture able to degrade high-molecular-weight polycyclic aromatic hydrocarbons

AIM: The aim of this study was to further characterize a bacterial culture (VUN 10,010) capable of benzo[a]pyrene cometabolism. METHODS AND RESULTS: The bacterial culture, previously characterized as a pure culture of Stenotrophomonas maltophilia (VUN 10,010), was found to also contain another bacterial species (Mycobacterium sp. strain 1B), capable of degrading a similar range of PAH substrates. Analysis of its 16S rRNA gene sequence and growth characteristics revealed the strain to be a fast-growing Mycobacterium sp., closely related to other previously isolated PAH and xenobiotic-degrading mycobacterial strains. Comparison of the PAH-degrading characteristics of Mycobacterium sp. strain 1B with those of S. maltophilia indicated some similarities (ability to degrade phenanthrene and pyrene), but some differences were also noted (S. maltophilia able to degrade fluorene, but not fluoranthene, whereas Mycobacterium sp. strain 1B can degrade fluoranthene, but not fluorene). Unlike the S. maltophilia culture, there was no evidence of benzo[a]pyrene degradation by Mycobacterium sp. strain 1B, even in the presence of other PAHs (ie pyrene) as co-metabolic substrates. Growth of Mycobacterium sp. strain 1B on other organic carbon sources was also limited compared with the S. maltophilia culture. CONCLUSIONS: This study isolated a Mycobacterium strain from a bacterial culture capable of benzo[a]pyrene cometabolism. The Mycobacterium strain displays different PAH-degrading characteristics to those described previously for the PAH-degrading bacterial culture. It is unclear what role the two bacterial strains play in benzo[a]pyrene cometabolism, as the Mycobacterium strain does not appear to have endogenous benzo[a]pyrene degrading ability. SIGNIFICANCE AND IMPACT OF THE STUDY: This study describes the isolation and characterization of a novel PAH-degrading Mycobacterium strain from a PAH-degrading culture. Further studies utilizing this strain alone, and in combination with other members of the consortium, will provide insight into the diverse roles different bacteria may play in PAH degradation in mixed cultures and in the environment.     

Degradation of fluoranthene, pyrene, benz[a]anthracene and dibenz[a,h]anthracene by Burkholderia cepacia

Microbiological analysis of soils from a polycyclic aromatic hydrocarbon (PAH)-contaminated site resulted in the enrichment of five microbial communities capable of utilizing pyrene as a sole carbon and energy source. Communities 4 and 5 rapidly degraded a number of different PAH compounds. Three pure cultures were isolated from community 5 using a spray plate method with pyrene as the sole carbon source. The cultures were identified as strains of Burkholderia ( Pseudomonas ) cepacia on the basis of biochemical and growth tests. The pure cultures (VUN 10 001, VUN 10 002 and VUN 10 003) were capable of degrading fluorene, phenanthrene and pyrene (100 mg l⁻¹) to undetectable levels within 7–10 d in standard serum bottle cultures. Pyrene degradation was observed at concentrations up to 1000 mg l⁻¹. The three isolates were also able to degrade other PAHs including fluoranthene, benz[ a ]anthracene and dibenz[ a , h ]anthracene as sole carbon and energy sources. Stimulation of dibenz[ a , h ]anthracene and benzo[ a ]pyrene degradation was achieved by the addition of small quantities of phenanthrene to cultures containing these compounds. Substrate utilization tests revealed that these micro-organisms could also grow on n -alkanes, chlorinated- and nitro-aromatic compounds.