Diameter increase of collagen fibrils of the mouse endometrium during decidualization

The diameter of collagen fibrils was measured in different regions of the antimesometrial endometrium of mice on days 5, 6, and 7 of pregnancy as well as in the endometrium of virgin mice. The average diameter of fibrils of virgin mice was 39.18 nm (range: 20-80). In the region of fully decidualized cells, the averages and ranges were 45.32 nm (30-170), 89.39 nm (30-270), and 125.88 nm (20-370), respectively, on days 5, 6, and 7 of pregnancy. Thick fibrils larger than 70 nm had irregular profiles. Our results show that the increase in diameter is associated with the decidualization of the mouse endometrium.     

Amino and carboxyl propeptides in bone collagen fibrils during embryogenesis

Summary Collagen fibrillogenesis was studied in tibiae of chick embryos, 9, 11, and 14 days old. Specimens were incubated with antibodies against the amino and the carboxyl propeptides of type-I collagen and subjected to ferritin-la-belling immuno-electron microscopy. The amino propeptide was found in thin fibrils, 20–40 nm in diameter, distributed at 60-nm periodicity. The carboxyl propeptide antibody labelled a wide spectrum of fibrils, although the majority were in the range of 40–100 nm, distinctly larger than those labelled with the amino propeptide antibody. The presence of pN (amino propeptide plus collagen) and pC (carboxyl propeptide plus collagen) collagen was also demonstrated by Western blotting in all specimens. This study suggests that the sequence of propeptide removal may regulate collagen fibril diameter.     

Time-dependent increase in the stability of collagen fibrils formed in vitro. I. Effects of pH and salt concentration on the dissolution of the fibrils.

The time-dependent increase in stability, as measured in terms of the rate of dissolution, of collagen fibrils formed in vitro from pepsin-treated collagen was significantly affected only by temperature, and not by either ionic strength or pH. This is in contrast with collagen fibril formation, a process which is greatly affected by ionic strength and pH. Within the range of temperature 29-37 degrees C, lower temperature caused slower fibril formation and faster fibril stabilization. These results suggest that the intermolecular interactions involved in stabilizing collagen fibrils are entirely different from those involved in fibril formation. Based on kinetic analysis of the dissolution and stabilization of the fibrils, it is proposed that collagen molecules first form unstable fibrils which become gradually stabilized on prolonged incubation, without necessarily introducing covalent cross-links.     

Mechanical properties of collagen fibrils

The formation of collagen fibers from staggered subfibrils still lacks a universally accepted model. Determining the mechanical properties of single collagen fibrils (diameter 50-200 nm) provides new insights into collagen structure. In this work, the reduced modulus of collagen was measured by nanoindentation using atomic force microscopy. For individual type 1 collagen fibrils from rat tail, the modulus was found to be in the range from 5 GPa to 11.5 GPa (in air and at room temperature). The hypothesis that collagen anisotropy is due to the subfibrils being aligned along the fibril axis is supported by nonuniform surface imprints performed by high load nanoindentation.     

Matrix loading: assembly of extracellular matrix collagen fibrils during embryogenesis

Nothing in biology stimulates the imagination like the development of a single fertilized egg into a newborn child. Consequently, a major focus of biomedical research is aimed at understanding cell differentiation, proliferation, and specialization during child health and human development. However, the fact that the increase in size and shape of the growing embryo has as much to do with the extracellular matrix (ECM) as with the cells themselves, is largely overlooked. Cells in developing tissues are surrounded by a fiber-composite ECM that transmits mechanical stimuli, maintains the shape of developing tissues, and functions as a scaffold for cell migration and attachment. The major structural element of the ECM is the collagen fibril. The fibrils, which are indeterminate in length, are arranged in different tissues in exquisite supramolecular architectures, including parallel bundles, orthogonal lamellae, and concentric weaves. This article reviews our current understanding of the synthesis and assembly of collagen fibrils, and discusses challenging questions about how cells assemble an organized ECM during embryogenesis.     

Structure and function of bone collagen fibrils

The intermolecular volume of fully hydrated collagen fibrils from a number of mineralized and non-mineralized tissues of adult rats has been determined both by an exclusion technique and by a method which involves the monitoring of specific X-ray diffraction parameters. The intermolecular volume of either bone or dentinal fibrils is approximately twice that of either tail or achilles tendon, and the most frequent intermolecular distance in bone or dentine fibrils is approximately 3 Å larger than of the tendons.A number of fibrillar structures are most compatible with the intermolecular volume of rat tail tendon. These include hexagonal molecular packing and orthogonal arrays of microfibrils comprising seven parallel molecular strands. The intermolecular volume of bone or dentinal collagen fibrils, on the other hand, appears to arise from structures having a disordered or pseudo-hexagonal molecular packing, in which the most frequent intermolecular distance is about 19 Å.The space associated with collagen fibrils in adult bone is such that 70 to 80% of the mineral is located within the intermolecular space of the fibrils—approximately equal amounts of mineral being in spaces having lateral dimensions of 25 to 75 Å and 6 to 12 Å, respectively. Particles located in the latter kind of intermolecular space probably constitute, to a large extent, the non-crystalline mineral phase of adult bone.The stereo-chemical constraints on the transport of mineral ions into and within collagen fibrils of bone and tendon support the postulate that bone collagen is an in vivo catalyst for mineral deposition and further suggests that its catalytic activity may be partially regulated through its molecular packing.     

Ultrastructure of the collagen fibrils in the coelacanth

The collagen fibrils in the rectal gland capsule of the coelacanth Latimeria chalumnae are c . 127 nm in diameter and resemble those fibrils that play an active mechanical role in trout skin. The fibrils having periodicity of about 54 nm and seven intrabands per period suggest that the collagen molecules in Latimeria are shorter, a feature they presumably share with lower tetrapods.     

Rotary shadowing of collagen monomers, oligomers, and fibrils during tendon fibrillogenesis

Collagen monomers, oligomers, and fibrillar structures were isolated from chick tendons at various stages of development and studied by rotary shadowing. Monomers of Type I collagen, solubilized in 0.15 M NaCl solutions, were mostly present as collagen, pN-collagen, and pC-collagen with few procollagen molecules. They did not form polymers, nor were they associated with a carrier. Dimers of fibrillar collagen molecules were arranged in a 4-D stagger, suggesting that this was the preferred molecular interaction for the initiation of collagen fibrillogenesis. Type XII collagen molecules were mostly free, but some were attached by their central globular domain to one end of free fibrillar collagen molecules. Tenascin and Type VI collagen were also identified. The fibril populations consisted of collagen and beaded structures. These fibrils consisted of beads (globular domains) about 23 nm in diameter, separated by a period about 27 nm in length. Beads were linked by filamentous structures. These beaded fibrils probably represent the microfibrils of elastin.     

Viscoelastic properties of isolated collagen fibrils

Understanding the viscoelastic behavior of collagenous tissues with complex hierarchical structures requires knowledge of the properties at each structural level. Whole tissues have been studied extensively, but less is known about the mechanical behavior at the submicron, fibrillar level. Using a microelectromechanical systems platform, in vitro coupled creep and stress relaxation tests were performed on collagen fibrils isolated from the sea cucumber dermis. Stress-strain-time data indicate that isolated fibrils exhibit viscoelastic behavior that could be fitted using the Maxwell-Weichert model. The fibrils showed an elastic modulus of 123 ± 46 MPa. The time-dependent behavior was well fit using the two-time-constant Maxwell-Weichert model with a fast time response of 7 ± 2 s and a slow time response of 102 ± 5 s. The fibrillar relaxation time was smaller than literature values for tissue-level relaxation time, suggesting that tissue relaxation is dominated by noncollagenous components (e.g., proteoglycans). Each specimen was tested three times, and the only statistically significant difference found was that the elastic modulus is larger in the first test than in the subsequent two tests, indicating that viscous properties of collagen fibrils are not sensitive to the history of previous tests.     

Low strain nanomechanics of collagen fibrils

The high stiffness of collagenous tissues such as tendon and ligament is derived in large part from the mechanics and geometries of the constituent collagen's hierarchical forms. The primary structural unit in connective tissues is the collagen fibril for which there exists little direct mechanical or deformational study. Therefore, the current understanding of the mechanisms involved is extrapolated from whole tissue data. To address this, the elastic response due to bending of readily extractable adult collagen fibrils was studied, and the results were compared to previously reported radial indentation experiments. A demonstration of a material anisotropy arising without loss of the assumptions of homogeneity is presented.     

Stabilization of collagen fibrils by hydroxyproline

The substitution of hydroxyproline for proline in position Y of the repeating Gly-X-Y tripeptide sequence of collagen-like poly(tripeptide)s (i.e., in the position in which Hyp occurs naturally) is predicted to enhance the stability of aggregates of triple helices, while the substitution of Hyp in position X (where no Hyp occurs naturally) is predicted to decrease the stability of aggregates. Earlier conformational energy computations have indicated that two triple helices composed of poly(Gly-Pro-Pro) polypeptide chains pack preferentially with a nearly parallel orientation of the helix axes [Nemethy, G., & Scheraga, H.A. (1984) Biopolymers 23, 2781-2799]. Conformational energy computations reported here indicate that the same packing arrangement is preferred for the packing of two poly(Gly-Pro-Hyp) triple helices. The OH groups of the Hyp residues can be accommodated in the space between the two packed triple helices without any steric hindrance. They actually contribute about 1.9 kcal/mol per Gly-Pro-Hyp tripeptide to the packing energy, as a result of the formation of weak hydrogen bonds and other favorable noncovalent interatomic interactions. On the other hand, the substitution of Hyp in position X weakens the packing by about 1.7 kcal/mol per Gly-Hyp-Pro tripeptide. Numerous published experimental studies have established that Hyp in position Y stabilizes an isolated triple helix relative to dissociated random coils, while Hyp in position X has the opposite effect. We propose that Hyp in position Y also enhances the stability of the assembly of collagen into microfibrils while, in position X, it decreases this stability.     

The precipitation of toroidal collagen fibrils

The morphology of aggregates of calf-skin tropocollagen, precipitated by continuous injection into neutral phosphate buffers at 35 degrees , has been studied by electron microscopy. Although most of the collagen is precipitated as normal native fibrils, a small proportion forms closed toroidal structures having the usual native band-interband pattern. Theoretical considerations, based on elastic energies in a general microfibril model, predict that the toroids should have a simple super-helical structure, and this is not inconsistent with the observations. From the theoretical energies it was possible to estimate a crude lower limit of 3kcal./mole for the free energy of association of the tropocollagen macromolecules.     

Liquid crystallinity in collagen solutions and magnetic orientation of collagen fibrils

Studies of the optical birefringence of solutions of acid-soluble collagen from rat-tail tendon at 22°C in the pH range 1.0–6.0 show that collagen exhibits an isotropic to mesophase transition only between pH 2.4 and 3.0 at 10% weight concentration. Such liquid crystalline order is probably essential for the orientation of collagen in a magnetic field. When solutions of neutral salt-soluble collagen were precipitated at pH 7.0 by warming to 37°C (“heat gelling”) in a magnetic field of ca. 20 kG, the resulting fibrils wee oriented perpendicular to the direction of the field. Heat gelling is shown to be a useful technique for maintaining the orientation induced in precursor solutions even after the sample is removed from the magnetic field.     

Failure of mineralized collagen fibrils: modeling the role of collagen cross-linking

Experimental evidence demonstrates that collagen cross-linking in bone tissue significantly influences its deformation and failure behavior yet difficulties exist in determining the independent biomechanical effects of collagen cross-linking using in vitro and in vivo experiments. The aim of this study is to use a nano-scale composite material model of mineral and collagen to determine the independent roles of enzymatic and non-enzymatic cross-linking on the mechanical behavior of a mineralized collagen fibril. Stress–strain curves were obtained under tensile loading conditions without any collagen cross-links, with only enzymatic cross-links (modeled by cross-linking the end terminal position of each collagen domain), or with only non-enzymatic cross-links (modeled by random placement of cross-links within the collagen–collagen interfaces). Our results show enzymatic collagen cross-links have minimal effect on the predicted stress–strain curve and produce a ductile material that fails through debonding of the mineral–collagen interface. Conversely, non-enzymatic cross-links significantly alter the predicted stress–strain response by inhibiting collagen sliding. This inhibition leads to greater load transfer to the mineral, which minimally affects the predicted stress, increases modulus and decreases post-yield strain and toughness. As a consequence the toughness of bone that has more non-enzymatically mediated collagen cross-links will be drastically reduced.     

Decorin regulates assembly of collagen fibrils and acquisition of biomechanical properties during tendon development

Tendon function involves the development of an organized hierarchy of collagen fibrils. Small leucine-rich proteoglycans have been implicated in the regulation of fibrillogenesis and decorin is the prototypic member of this family. Decorin-deficient mice demonstrate altered fibril structure and mechanical function in mature skin and tail tendons. However, the developmental role(s) of decorin needs to be elucidated. To define these role(s) during tendon development, tendons (flexor digitorum longus) were analyzed ultrastructurally from postnatal day 10 to 90. Decorin-deficient tendons developed abnormal, irregularly contoured fibrils. Finite mixture modeling estimated that the mature tendon was a three-subpopulation mixture of fibrils with characteristic diameter ranges. During development, in each subpopulation the mean diameter was consistently larger in mutant mice. Also, diameter distributions and the percentage of fibrils in each subpopulation were altered. Biomechanical analyses demonstrated that mature decorin-deficient tendons had significantly reduced strength and stiffness; however, there was no reduction in immature tendons. Expression of decorin and biglycan, a closely related family member, was analyzed during development. Decorin increased with development while biglycan decreased. Spatially, both had a comparable localization throughout the tendon. Biglycan expression increased substantially in decorin-deficient tendons suggesting a potential functional compensation. The accumulation of structural defects during fibril growth, a period associated with decorin expression and low biglycan expression, may be the cause of compromised mechanical function in the absence of decorin. Our findings indicate that decorin is a key regulatory molecule and that the temporal switch from biglycan to decorin is an important event in the coordinate regulation of fibrillogenesis and tendon development.