The crystal structure of HpcE, a bifunctional decarboxylase/isomerase with a multifunctional fold

The structure of the bifunctional enzyme HpcE (OPET decarboxylase/HHDD isomerase) from Escherichia coli shows that the protein consists of highly similar N and C terminal halves. Sequence matches suggest that this fold is widespread among different species, including man. Many of these homologues are uncharacterized but apparently connected with the metabolism of aromatic compounds. The domain shows similar topology to the C terminal domain of fumarylacetoacetate hydrolase (FAH), a functionally related enzyme, despite lacking significant overall sequence similarity. HpcE is known to catalyze two rather different reactions, and comparisons with FAH allow some tentative conclusions to be drawn about the active sites. Key mutations within the active site apparently allow enzymes with this fold to carry out a variety chemical processes.     

Structural plasticity and enzyme action: crystal structures of mycobacterium tuberculosis peptidyl-tRNA hydrolase

Peptidyl-tRNA hydrolase cleaves the ester bond between tRNA and the attached peptide in peptidyl-tRNA in order to avoid the toxicity resulting from its accumulation and to free the tRNA available for further rounds in protein synthesis. The structure of the enzyme from Mycobacterium tuberculosis has been determined in three crystal forms. This structure and the structure of the enzyme from Escherichia coli in its crystal differ substantially on account of the binding of the C terminus of the E. coli enzyme to the peptide-binding site of a neighboring molecule in the crystal. A detailed examination of this difference led to an elucidation of the plasticity of the binding site of the enzyme. The peptide-binding site of the enzyme is a cleft between the body of the molecule and a polypeptide stretch involving a loop and a helix. This stretch is in the open conformation when the enzyme is in the free state as in the crystals of M. tuberculosis peptidyl-tRNA hydrolase. Furthermore, there is no physical continuity between the tRNA and the peptide-binding sites. The molecule in the E. coli crystal mimics the peptide-bound enzyme molecule. The peptide stretch referred to earlier now closes on the bound peptide. Concurrently, a channel connecting the tRNA and the peptide-binding site opens primarily through the concerted movement of two residues. Thus, the crystal structure of M. tuberculosis peptidyl-tRNA hydrolase when compared with the crystal structure of the E. coli enzyme, leads to a model of structural changes associated with enzyme action on the basis of the plasticity of the molecule.     

Refined structure of alkaline phosphatase from Escherichia coli at 2.8 A resolution

The structure of alkaline phosphatase from Escherichia coli has been determined to 2.8 A resolution. The multiple isomorphous replacement electron density map of the dimer at 3.4 A was substantially improved by molecular symmetry averaging and solvent flattening. From these maps, polypeptide chains of the dimer were built using the published amino acid sequence. Stereochemically restrained least-squares refinement of this model against native data, starting with 3.4 A data and extending in steps to 2.8 A resolution, proceeded to a final overall crystallographic R factor of 0.256. Alkaline phosphatase-phosphomonoester hydrolase (EC 3.1.3.1) is a metalloenzyme that forms an isologous dimer with two reactive centers 32 A apart. The topology of the polypeptide fold of the subunit is of the alpha/beta class of proteins. Despite the similarities in the overall alpha/beta fold with other proteins, alkaline phosphatase does not have a characteristic binding cleft formed at the carboxyl end of the parallel sheet, but rather an active pocket that contains a cluster of three functional metal sites located off the plane of the central ten-stranded sheet. This active pocket is located near the carboxyl ends of four strands and the amino end of the antiparallel strand, between the plane of the sheet and two helices on the same side. Alkaline phosphatase is a non-specific phosphomonoesterase that hydrolyzes small phosphomonoesters as well as the phosphate termini of DNA. The accessibility calculations based on the refined co-ordinates of the enzyme show that the active pocket barely accommodates inorganic phosphate. Thus, the alcoholic or phenolic portion of the substrate would have to be exposed on the surface of the enzyme. Two metal sites, M1 and M2, 3.9 A apart, are occupied by zinc. The third site, M3, 5 A from site M2 and 7 A from site M1, is occupied by magnesium or, in the absence of magnesium, by zinc. As with other zinc-containing enzymes, histidine residues are ligands to zinc site M1 (three) and to zinc site M2 (one). Ligand assignment and metal preference indicate that the crystallographically found metal sites M1, M2 and M3 correspond to the spectroscopically deduced metal sites A, B and C, respectively. Arsenate, a product analog and enzyme inhibitor, binds between Ser102 and zinc sites M1 and M2. The position of the guanidinium group of Arg 166 is within hydrogen-bonding distance from the arsenate site.(ABSTRACT TRUNCATED AT 400 WORDS)     

Crystal structure of the zinc-binding transport protein ZnuA from Escherichia coli reveals an unexpected variation in metal coordination

Bacterial ATP-binding cassette transport systems for high-affinity uptake of zinc and manganese use a cluster 9 solute-binding protein. Structures of four cluster 9 transport proteins have been determined previously. However, the structural determinants for discrimination between zinc and manganese remain under discussion. To further investigate the variability of metal binding sites in bacterial transporters, we have determined the structure of the zinc-bound transport protein ZnuA from Escherichia coli to 1.75 A resolution. The overall structure of ZnuA is similar to other solute-binding transporters. A scaffolding alpha-helix forms the backbone for two structurally related globular domains. The metal-binding site is located at the domain interface. The bound zinc ion is coordinated by three histidine residues (His78, His161 and His225) and one glutamate residue (Glu77). The functional role of Glu77 for metal binding is unexpected, because this residue is not conserved in previously determined structures of zinc and manganese-specific transport proteins. The observed metal coordination by four protein residues differs significantly from the zinc-binding site in the ZnuA transporter from Synechocystis 6803, which binds zinc via three histidine residues. In addition, the E. coli ZnuA structure reveals the presence of a disulfide bond in the C-terminal globular domain that is not present in previously determined cluster 9 transport protein structures.     

Sequence alignment and homology threading reveals prokaryotic and eukaryotic proteins similar to lactose permease

Certain prokaryotic transport proteins similar to the lactose permease of Escherichia coli (LacY) have been identified by BLAST searches from available genomic databanks. These proteins exhibit conservation of amino acid residues that participate in sugar binding and H(+) translocation in LacY. Homology threading of prokaryotic transporters based on the X-ray structure of LacY (PDB ID: 1PV7) and sequence similarities reveals a common overall fold for sugar transporters belonging to the Major Facilitator Superfamily (MFS) and suggest new targets for study. Evolution-based searches for sequence similarities also identify eukaryotic proteins bearing striking resemblance to MFS sugar transporters. Like LacY, the eukaryotic proteins are predicted to have 12 transmembrane domains (TMDs), and many of the irreplaceable residues for sugar binding and H(+) translocation in LacY appear to be largely conserved. The overall size of the eukaryotic homologs is about twice that of prokaryotic permeases with longer N and C termini and loops between TMDs III-IV and VI-VII. The human gene encoding protein FLJ20160 consists of six exons located on more than 60,000 bp of DNA sequences and requires splicing to produce mature mRNA. Cellular localization predictions suggest membrane insertion with possible proteolysis at the N terminus, and expression studies with the human protein FJL20160 demonstrate membrane insertion in both E.coli and Pichia pastoris. Widespread expression of the eukaryotic sugar transport candidates suggests an important role in cellular metabolism, particularly in brain and tumors. Homology is observed in the TMDs of both the eukaryotic and prokaryotic proteins that contain residues involved in sugar binding and H(+) translocation in LacY.     

Pactolus I-domain: functional switching of the Rossmann fold

Murine Pactolus is a neutrophil-specific single chain glycoprotein that plays a role as an apoptosis marker for macrophages. The extracellular region of the protein shows strong sequence similarities to integrin beta-subunits. Critical sequence modifications differentiate its function when compared to the integrin family. We show experimentally that Pactolus I-domain does not bind divalent metal ions, indicating that ligand binding is not mediated through a metal ion-dependent adhesion site (MIDAS). NMR data was used to map secondary structure and the strand pairing within the beta-sheet to confirm an overall Rossmann fold topology. Homology modeling enhanced by the NMR data was used to determine the overall structure, with two key loop insertions/deletions (insertion 2 and SDL) that distinguish the Pactolus I-domain from the integrin alpha I-domain and beta I-domains. NMR peak exchange broadening is observed due to dimerization, correlating to the beta I-domain and beta propeller heterodimerization region within the integrin headpiece. Two unique N-linked glycosylation sites (Asn151 and Asn230) within this region disrupt dimerization and may account for why Pactolus is not found to associate with an alpha-subunit. These changes in quaternary structure, ligand binding loops, glycosylation, and metal sites illustrate how evolution has rapidly and effectively altered key aspects of the integrin beta-subunit to derive a protein of novel function on an existing protein scaffold.     

Possible regulatory role for the histidine-rich loop in the zinc transport protein, ZnuA

A number of bacterial metal transporters belong to the ABC transporter family. To better understand the structural determinants of metal selectivity of one such transporter, we previously determined the structure of the periplasmic domain of a zinc transporter, ZnuA, from Synechocystis 6803 and found that ZnuA binds zinc via three histidines. Unique to these ABC zinc transporters, ZnuA has a highly charged and mobile loop that protrudes from the protein in the vicinity of the metal binding site that we had suggested might facilitate zinc acquisition. To further examine the function of this loop, the structure and zinc binding properties of two ZnuA variants were determined. When the loop is entirely deleted, zinc still binds to the three histidines. However, unlike what was suggested from the structure of a similar solute binding protein, TroA, release of zinc occurs concomitantly with large conformational changes in two of the three chelating histidines. These structural results combined with isothermal titration calorimetry data demonstrate that there are at least two classes of zinc binding sites: the high-affinity site in the cleft between the two domains and at least one additional site on the flexible loop. This loop has approximately 100-fold weaker affinity for zinc than the high-affinity zinc binding site, and its deletion does not affect the high-affinity site. From these results, we suggest that this region might be a sensor for high periplasmic levels of zinc.     

Metal-protein interactions: structure information from Ni(2+)-induced pseudocontact shifts in a native nonmetalloprotein

Information about the structure of a native nonmetalloprotein was obtained from the pseudocontact shifts induced by a paramagnetic metal ion bound to the protein. The approach exploits the presence of metal binding sites on the surface of the protein. Using Escherichia coli thioredoxin as a model protein, we show that potential binding sites can be identified using the Cu(2+) ion, and that pseudocontact shifts induced by a Ni(2+) ion bound to one of these sites can provide valuable long-range structure information about the protein.     

Crystal structure of the Vibrio cholerae ferric uptake regulator (Fur) reveals insights into metal co-ordination

The ferric uptake regulator (Fur) is a metal-dependent DNA-binding protein that acts as both a repressor and an activator of numerous genes involved in maintaining iron homeostasis in bacteria. It has also been demonstrated in Vibrio cholerae that Fur plays an additional role in pathogenesis, opening up the potential of Fur as a drug target for cholera. Here we present the crystal structure of V. cholerae Fur that reveals a very different orientation of the DNA-binding domains compared with that observed in Pseudomonas aeruginosa Fur . Each monomer of the dimeric Fur protein contains two metal binding sites occupied by zinc in the crystal structure. In the P. aeruginosa study these were designated as the regulatory site (Zn1) and structural site (Zn2). This V. cholerae Fur study, together with studies on Fur homologues and paralogues, suggests that in fact the Zn2 site is the regulatory iron binding site and the Zn1 site plays an auxiliary role. There is no evidence of metal binding to the cysteines that are conserved in many Fur homologues, including Escherichia coli Fur. An analysis of the metal binding properties shows that V. cholerae Fur can be activated by a range of divalent metals.     

Binding ability of a HHP-tagged protein towards Ni2+ studied by paramagnetic NMR relaxation: The possibility of obtaining long-range structure information

The binding ability of a protein with a metal binding tag towards Ni(2+) was investigated by longitudinal paramagnetic NMR relaxation, and the possibility of obtaining long-range structure information from the paramagnetic relaxation was explored. A protein with a well-defined solution structure (Escherichia coli thioredoxin) was used as the model system, and the peptide His-His-Pro (HHP) fused to the N-terminus of the protein was used as the metal binding tag. It was found that the tag forms a stable dimer complex with the paramagnetic Ni(2+) ion, where each metal ion binds two HHP-tagged protein molecules. However, it was also found that additional sites in the protein compete with the HHP-tag for the binding of the metal ion. These binding sites were identified as the side chain carboxylate groups of the aspartic and glutamic acid residues. Yet, the carboxylate groups bind the Ni(2+) ions considerably weaker than the HHP-tag, and only protons spatially close to the carboxylate sites are affected by the Ni(2+) ions bound to these groups. As for the protons that are unaffected by the carboxylate-bound Ni(2+) ions, it was found that the long-range distances derived from the paramagnetic relaxation enhancements are in good agreement with the solution structure of thioredoxin. Specifically, the obtained long-range paramagnetic distance constraints revealed that the dimer complex is asymmetric with different orientations of the two protein molecules relative to the Ni(2+) ion.     

Genome organisation and chromatin structure in Escherichia coli

We have analysed the complete sequence of the Escherichia coli K12 isolate MG1655 genome for chromatin-associated protein binding sites, and compared the predicted location of predicted sites with experimental expression data from 'DNA chip' experiments. Of the dozen proteins associated with chromatin in E. coli, only three have been shown to have significant binding preferences: integration host factor (IHF) has the strongest binding site preference, and FIS sites show a weak consensus, and there is no clear consensus site for binding of the H-NS protein. Using hidden Markov models (HMMs), we predict the location of 608 IHF sites, scattered throughout the genome. A subset of the IHF sites associated with repeats tends to be clustered around the origin of replication. We estimate there could be roughly 6000 FIS sites in E. coli, and the sites tend to be localised in two regions flanking the replication termini. We also show that the regions upstream of genes regulated by H-NS are more curved and have a higher AT content than regions upstream of other genes. These regions in general would also be localised near the replication terminus.     

Three-dimensional structure of the bifunctional enzyme phosphoribosylanthranilate isomerase: indoleglycerolphosphate synthase from Escherichia coli refined at 2.0 A resolution.

The three-dimensional structure of the monomeric bifunctional enzyme N-(5'-phosphoribosyl)anthranilate isomerase:indole-3-glycerol-phosphate synthase from Escherichia coli has been refined at 2.0 A resolution, using oscillation film data obtained from synchrotron radiation. The model includes the complete protein (452 residues), two phosphate ions and 628 water molecules. The final R-factor is 17.3% for all observed data between 15 and 2 A resolution. The root-mean-square deviations from ideal bond lengths and bond angles are 0.010 A and 3.2 degrees, respectively. The structure of N-(5'-phosphoribosyl)anthranilate isomerase: indole-3-glycerol-phosphate synthase from E. coli comprises two beta/alpha-barrel domains that superimpose with a root-mean-square deviation of 2.03 A for 138 C alpha-pairs. The C-terminal domain (residues 256 to 452) catalyses the PRAI reaction and the N-terminal domain (residues 1 to 255) catalyses the IGPS reaction, two sequential steps in tryptophan biosynthesis. The enzyme has the overall shape of a dumb-bell, resulting in a surface area that is considerably larger than normally observed for monomeric proteins of this size. The active sites of the PRAI and the IGPS domains, both located at the C-terminal side of the central beta-barrel, contain equivalent binding sites for the phosphate moieties of the substrates N-(5'-phosphoribosyl) anthranilate and 1-(o-carboxyphenylamino)-1-deoxyribulose-5-phosphate. These two phosphate binding sites are identical with respect to their positions within the tertiary structure of the beta/alpha-barrel, the conformation of the residues involved in phosphate binding and the hydrogen-bonding network between the phosphate ions and the protein. The active site cavities of both domains contain similar hydrophobic pockets that presumably bind the anthranilic acid moieties of the substrates. These similarities of the tertiary structures and the active sites of the two domains provide evidence that N-(5'-phosphoribosyl)anthranilate isomerase:indole-3-glycerol-phosphate synthase from E. coli results from a gene duplication event of a monomeric beta/alpha-barrel ancestor.     

Binding of nucleotides to an extramitochondrial acetyl-CoA hydrolase from rat liver

Cold labile extramitochondrial acetyl-CoA hydrolase (dimeric form) purified from rat liver was activated by various nucleoside triphosphates and inhibited by various nucleoside diphosphates. Activation of acetyl-CoA hydrolase by ATP was inhibited by a low concentration of ADP (Ki congruent to 6.8 microM) or a high concentration of AMP (Ki congruent to 2.3 mM). ADP and AMP were competitive inhibitors of ATP. A Scatchard plot of the binding of ATP to acetyl-CoA hydrolase (dimer) at room temperature gave a value of 25 microM for the dissociation constant with at least 2 binding sites/mol of dimer. Cold-treated monomeric enzyme also associated with ATP-agarose, suggesting that the monomeric form of the enzyme also has a nucleotide binding site(s), probably at least 1 binding site/mol of monomer. Phenylglyoxal or 2,3-butanedione, both of which modify arginyl residues of protein, inactivated acetyl-CoA hydrolase. ATP (an activator) greatly protected acetyl-CoA hydrolase from inactivation by these reagents, while ADP (an inhibitor) greatly (a substratelike, competitive inhibitor), and CoASH (a product) were less effective. However, addition of ADP plus valeryl-CoA (or CoASH) effectively prevented the inactivation by 2,3-butanedione, but that is not the case for phenylglyoxal. These results suggest that one or more arginyl residues are involved in the nucleotide binding site of extramitochondrial acetyl-CoA hydrolase and that their nucleotide binding sites locate near the substrate binding site.     

Recognition of functional sites in protein structures

Recognition of regions on the surface of one protein, that are similar to a binding site of another is crucial for the prediction of molecular interactions and for functional classifications. We first describe a novel method, SiteEngine, that assumes no sequence or fold similarities and is able to recognize proteins that have similar binding sites and may perform similar functions. We achieve high efficiency and speed by introducing a low-resolution surface representation via chemically important surface points, by hashing triangles of physico-chemical properties and by application of hierarchical scoring schemes for a thorough exploration of global and local similarities. We proceed to rigorously apply this method to functional site recognition in three possible ways: first, we search a given functional site on a large set of complete protein structures. Second, a potential functional site on a protein of interest is compared with known binding sites, to recognize similar features. Third, a complete protein structure is searched for the presence of an a priori unknown functional site, similar to known sites. Our method is robust and efficient enough to allow computationally demanding applications such as the first and the third. From the biological standpoint, the first application may identify secondary binding sites of drugs that may lead to side-effects. The third application finds new potential sites on the protein that may provide targets for drug design. Each of the three applications may aid in assigning a function and in classification of binding patterns. We highlight the advantages and disadvantages of each type of search, provide examples of large-scale searches of the entire Protein Data Base and make functional predictions.     

Structural and biological analysis of the metal sites of Escherichia coli hydrogenase accessory protein HypB

The [NiFe]-hydrogenase protein produced by many types of bacteria contains a dinuclear metal center that is required for enzymatic activity. Assembly of this metal cluster involves the coordinated activity of a number of helper proteins including the accessory protein, HypB, which is necessary for Ni(II) incorporation into the hydrogenase proteins. The HypB protein from Escherichia coli has two metal-binding sites, a high-affinity Ni(II) site that includes ligands from the N-terminal domain and a low-affinity metal site located within the C-terminal GTPase domain. In order to determine the physiological relevance of the two separate sites, hydrogenase production was assessed in strains of E. coli expressing wild-type HypB, the isolated GTPase domain, or site-directed mutants of metal-binding residues. These experiments demonstrate that both metal sites of HypB are critical for the maturation of the hydrogenase enzymes in E. coli. X-ray absorption spectroscopy of purified proteins was used to examine the detailed coordination spheres of each nickel-loaded site. In addition, because the low-affinity metal site has a stronger preference for Zn(II) than Ni(II), the ligands and geometry for this metal were also resolved. The results from these experiments are discussed in the context of a mechanism for Ni(II) insertion into the hydrogenase protein.     

Structural insight into substrate binding and catalysis of a novel 2-keto-3-deoxy-D-arabinonate dehydratase illustrates common mechanistic features of the FAH superfamily

The archaeon Sulfolobus solfataricus converts d-arabinose to 2-oxoglutarate by an enzyme set consisting of two dehydrogenases and two dehydratases. The third step of the pathway is catalyzed by a novel 2-keto-3-deoxy-d-arabinonate dehydratase (KdaD). In this study, the crystal structure of the enzyme has been solved to 2.1 Å resolution. The enzyme forms an oval-shaped ring of four subunits, each consisting of an N-terminal domain with a four-stranded β-sheet flanked by two α-helices, and a C-terminal catalytic domain with a fumarylacetoacetate hydrolase (FAH) fold. Crystal structures of complexes of the enzyme with magnesium or calcium ions and either a substrate analog 2-oxobutyrate, or the aldehyde enzyme product 2,5-dioxopentanoate revealed that the divalent metal ion in the active site is coordinated octahedrally by three conserved carboxylate residues, a water molecule, and both the carboxylate and the oxo groups of the substrate molecule. An enzymatic mechanism for base-catalyzed dehydration is proposed on the basis of the binding mode of the substrate to the metal ion, which suggests that the enzyme enhances the acidity of the protons α to the carbonyl group, facilitating their abstraction by glutamate 114. A comprehensive structural comparison of members of the FAH superfamily is presented and their evolution is discussed, providing a basis for functional investigations of this largely unexplored protein superfamily.     

Pyrimidine-specific ribonucleoside hydrolase from the archaeon Sulfolobus solfataricus--biochemical characterization and homology modeling

We report the characterization of the pyrimidine-specific ribonucleoside hydrolase from the hyperthermophilic archaeon Sulfolobus solfataricus (SsCU-NH). The gene SSO0505 encoding SsCU-NH was cloned and expressed in Escherichia coli and the recombinant protein was purified to homogeneity. SsCU-NH is a homotetramer of 140 kDa that recognizes uridine and cytidine as substrates. SsCU-NH shares 34% sequence identity with pyrimidine-specific nucleoside hydrolase from E. coli YeiK. The alignment of the amino acid sequences of SsCU-NH with nucleoside hydrolases whose 3D structures have been solved indicates that the amino acid residues involved in the calcium- and ribose-binding sites are preserved. SsCU-NH is highly thermophilic with an optimum temperature of 100 degrees C and is characterized by extreme thermodynamic stability (T(m) = 106 degrees C) and kinetic stability (100% residual activity after 1 h incubation at 90 degrees C). Limited proteolysis indicated that the only proteolytic cleavage site is localized in the C-terminal region and that the C-terminal peptide is necessary for the integrity of the active site. The structure of the enzyme determined by homology modeling provides insight into the proteolytic analyses as well as into mechanisms of thermal stability. This is the first nucleoside hydrolase from Archaea.     

Aminoglycoside binding displaces a divalent metal ion in a tRNA-neomycin B complex

Aminoglycosides bind to RNA and interfere with its function, and it has been suggested that aminoglycoside binding to RNA displaces essential divalent metal ions. Here we demonstrate that addition of various aminoglycosides inhibited Pb2+-induced cleavage of yeast tRNA(Phe). Cocrystallization of yeast tRNA(Phe) and an aminoglycoside, neomycin B, resulted in crystals that diffracted to 2.6 A and the structure of the complex was solved by molecular replacement. The structure shows that the neomycin B binding site overlaps with known divalent metal ion binding sites in yeast tRNA(Phe), providing direct evidence for the hypothesis that aminoglycosides displace metal ions. Additionally, the neomycin B binding site overlaps with major determinants for Escherichia coli phenylalanyl-tRNA-synthetase. Here we present data demonstrating that addition of neomycin B inhibited aminoacylation of E. coli tRNA(Phe) in the mid microM range. Given that aminoglycoside and metal ion binding sites overlap, we discuss that aminoglycosides can be considered as 'metal mimics'.